aboutsummaryrefslogtreecommitdiff
path: root/target-sh4/translate.c
AgeCommit message (Collapse)Author
2014-08-12trace: [tcg] Include TCG-tracing header on all targetsLluís Vilanova
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-28tcg: Invert the inclusion of helper.hRichard Henderson
Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-03-13cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber
Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-21target-sh4: Use new qemu_ld/st opcodesAurelien Jarno
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-10-10tcg: Move helper registration into tcg_context_initRichard Henderson
No longer needs to be done on a per-target basis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-09-02tcg: Change tcg_gen_exit_tb argument to uintptr_tRichard Henderson
And update all users. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-07-23cpu: Move singlestep_enabled field from CPU_COMMON to CPUStateAndreas Färber
Prepares for changing cpu_single_step() argument to CPUState. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09target-sh4: Change gen_intermediate_code_internal() argument to SuperHCPUAndreas Färber
Also use bool type while at it. Prepares for moving singlestep_enabled field to CPUState. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12target-sh4: Introduce SuperHCPU subclassesAndreas Färber
Store legacy name in SuperHCPUClass for -cpu ? and for case-insensitive class lookup. List CPUs by iterating over TYPE_SUPERH_CPU subclasses. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-03gen-icount.h: Rename gen_icount_start/end to gen_tb_start/endPeter Maydell
The gen_icount_start/end functions are now somewhat misnamed since they are useful for generic "start/end of TB" code, used for more than just icount. Rename them to gen_tb_start/end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-sh4: Use mul*2 for dmul*Richard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16target-sh4: Move TCG initialization to SuperHCPU initfnAndreas Färber
Add a tcg_enabled() check to suppress it for qtest. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-sh4: Introduce QOM realizefn for SuperHCPUAndreas Färber
Introduce a realizefn and set realized = true in cpu_sh4_init(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19build: kill libdis, move disassemblers to disas/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_buf from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_ptr from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-10disas: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Richard Henderson <rth@twiddle.net> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-09-27Emit debug_insn for CPU_LOG_TB_OP_OPT as well.Richard Henderson
For all targets that currently call tcg_gen_debug_insn_start, add CPU_LOG_TB_OP_OPT to the condition that gates it. This is useful for comparing optimization dumps, when the pre-optimization dump is merely noise. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove useless codeAurelien Jarno
Almost dead code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: cleanup DisasContextAurelien Jarno
We should avoid accessing env at translation stage, except of course for static values like the supported features. Remove variables copied from env in DisasContext and use the TB flags instead. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: rework exceptions handlingAurelien Jarno
Since commit fd4bab102 PC is restored in case of exception through code retranslation. While it is clearly the thing to do in case it is not not known if an helper is going to trigger an exception or not (e.g. for load/store, FPU, etc.), it just make things slower when the exception is already known at translation time. Partially revert this commit and save PC in the TCG code. Set bstate to BS_BRANCH to not generate TCG exit code. Micro-optimize the sleep helper. Make all the exception helpers to call raise_exception and mark it as noreturn. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: remove gen_clr_t() and gen_set_t()Aurelien Jarno
gen_clr_t() and gen_set_t() have very few callers and can be remplaced by a single line. Remove them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize swap.wAurelien Jarno
It's possible swap the two 16-bit words of a 32-bit register using a rotation. If the TCG target doesn't implement rotation, the replacement code is similar to the previously implemented code. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: optimize xtrctAurelien Jarno
The register being 32 bit long, after a shift to the right by 16 bits, the upper 16 bit are already cleared. There is no need to call ext16u to clear them. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addv and subv using TCGAurelien Jarno
addv and subv helpers implementation is directly copied from the SH4 manual and looks quite complex. It is however possible to explain it without branches, and is therefore possible to implement it with TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-21target-sh4: implement addc and subc using TCGAurelien Jarno
Now that setcond is available, the addc and subc can easily be implemented using TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15target-sh4: switch to AREG0 free modeBlue Swirl
Add an explicit CPUState parameter instead of relying on AREG0 and switch to AREG0 free mode. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04Kill off cpu_state_reset()Andreas Färber
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-04target-sh4: Let cpu_sh4_init() return SuperHCPUAndreas Färber
Turn cpu_init macro into a static inline function returning CPUSH4State for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: Start QOM'ifying CPU initAndreas Färber
Move code from cpu_sh4_init() into a QOM initfn. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-04-30target-sh4: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() to QOM superh_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-04-30target-sh4: QOM'ify CPUAndreas Färber
Embed CPUSH4State as first member of SuperHCPU. Let CPUClass::reset() call cpu_state_reset() for now. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-14target-sh4: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-02-28target-sh4: Clean includesStefan Weil
Remove some include statements which are not needed. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-01-10target-sh4: ignore ocbp and ocbwb instructionsAurelien Jarno
ocbp and ocbwb controls the writeback of a cache line to memory. They are supposed to do nothing in case of a cache miss. Given QEMU only partially emulate caches, it is safe to ignore these instructions. This fixes a kernel oops when trying to access an rtl8139 NIC with recent versions. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-01-07target-sh4: Fix operands for fipr, ftrv instructionsStefan Weil
Coverity complained about right shifts of opcode (16, 18) which were larger than the size of opcode (16 bit). Using the correct shift values fixes this. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-20Remove unused function parameters from gen_pc_load and rename the functionStefan Weil
Function gen_pc_load was introduced in commit d2856f1ad4c259e5766847c49acbb4e390731bd4. The only reason for parameter searched_pc was a debug statement in target-i386/translate.c. Parameter puc was needed by target-sparc until commit d7da2a10402f1644128b66414ca8f86bdea9ae7c. Remove searched_pc from the debug statement and remove both parameters from the parameter list of gen_pc_load. As the function name gen_pc_load was also misleading, it is now called restore_state_to_opc. This new name was suggested by Peter Maydell, thanks. v2: Remove last parameter, too, and rename the function. v3: Fix [] typo in target-arm/translate.c. Fix wrong SHA1 object name in commit message (copy+paste error). Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <weil@mail.berlios.de>
2011-04-10Fix conversions from pointer to tcg_target_longStefan Weil
tcg_gen_exit_tb takes a parameter of type tcg_target_long, so the type casts of pointer to long should be replaced by type casts of pointer to tcg_target_long (suggested by Blue Swirl). These changes are needed for build environments where sizeof(long) != sizeof(void *), especially for w64. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-02-04target-sh4: fix negcAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-16target-sh4: implement negc using TCGAurelien Jarno
Using setcond it's now possible to generate a relatively short negc instruction in TCG. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-16target-sh4: use rotl/rotr when possibleAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-17 05:27:59 +0000