aboutsummaryrefslogtreecommitdiff
path: root/target-sh4/helper.c
AgeCommit message (Collapse)Author
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-04-08hw: move headers to include/Paolo Bonzini
Many of these should be cleaned up with proper qdev-/QOM-ification. Right now there are many catch-all headers in include/hw/ARCH depending on cpu.h, and this makes it necessary to compile these files per-target. However, fixing this does not belong in these patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-sh4: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUSH4State/g" target-sh4/*.[hc] sed -i "s/#define CPUSH4State/#define CPUState/" target-sh4/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-05Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
2011-12-02fix spelling in target sub directoryDong Xu Wang
Cc: Richard Henderson <rth@twiddle.net> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-24sh_intc: convert interrupt controller to memory APIBenoît Canet
Signed-off-by: Benoit Canet <benoit.canet@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-03-03target-sh4: move intr_at_halt out of cpu_halted()Aurelien Jarno
All targets except SH4 have the same cpu_halted() routine, and it has only one caller. It is therefore a good candidate for inlining. The difference is the handling of the intr_at_halt, which is necessary to ignore SR.BL when sleeping. Move intr_at_halt handling out of it, by setting this variable while executing the sleep instruction, and clearing it when the CPU has been woken-up by an interrupt, whatever the state of SR.BL. Also rename this variable in_sleep. Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26target-sh4: update PTEH upon MMU exceptionAlexandre Courbot
Update the PTEH register to contain the VPN at which an MMU exception occured as specified by the SH4 reference. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26sh4: implement missing mmaped TLB read functionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26sh4: implement missing mmaped TLB write functionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25target-sh4: fix index of address read error exceptionAlexandre Courbot
Exception index of address read error should be 0x0e0. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25target-sh4: fix TLB invalidation codeAlexandre Courbot
In cpu_sh4_invalidate_tlb, the UTLB was invalidated twice and the ITLB left unchaged, probably because of some unfortunate copy/paste. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-15target-sh4: correct use of ! and &Aurelien Jarno
Fix wrong usage of ! and & in MMU related functions. Thanks to Blue Swirl for reporting the issue. Reported-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-10target-sh4: improve TLBAurelien Jarno
SH4 is using 16-bit instructions which means most of the constants are loaded through a constant pool at the end of the subroutine. The same memory page is therefore accessed in exec and read mode. With the current implementation, a QEMU TLB entry is set to read or read/write mode after an UTLB search and to exec mode after an ITLB search, which causes a lot of TLB exceptions to switch from read or read/write to exec and vice versa. This patch optimizes that by already setting the QEMU TLB entry in read or read/write mode when an UTLB entry is copied into ITLB (during an ITLB miss). This improve the emulation speed by about 14%. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-09target-sh4: implement writes to mmaped ITLBAurelien Jarno
Some Linux kernels seems to implement ITLB/UTLB flushing through by writing all TLB entries through the memory mapped interface instead of writing one to MMUCR.TI. Implement memory mapped ITLB write interface so that such kernels can boot. This fixes https://bugs.launchpad.net/bugs/700774 . Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-18Replace assert(0) with abort() or cpu_abort()Blue Swirl
When building with -DNDEBUG, assert(0) will not stop execution so it must not be used for abnormal termination. Use cpu_abort() when in CPU context, abort() otherwise. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-17Large page TLB flushPaul Brook
QEMU uses a fixed page size for the CPU TLB. If the guest uses large pages then we effectively split these into multiple smaller pages, and populate the corresponding TLB entries on demand. When the guest invalidates the TLB by virtual address we must invalidate all entries covered by the large page. However the address used to invalidate the entry may not be present in the QEMU TLB, so we do not know which regions to clear. Implementing a full vaiable size TLB is hard and slow, so just keep a simple address/mask pair to record which addresses may have been mapped by large pages. If the guest invalidates this region then flush the whole TLB. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12Remove cpu_get_phys_page_debug from userspace emulationPaul Brook
cpu_get_phys_page_debug makes no sense for userspace emulation, so remove it. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-14Fix incorrect exception_index useBlue Swirl
env->exception_index should be cleared with -1, not 0. See also 821b19fe923ac49a24cdb4af902584fdd019cee6. Spotted by Igor Kovalenko. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-09target-sh4: MMU: separate execute and read/write permissionsAurelien Jarno
On SH4, the ITLB and UTLB configurations are memory mapped, so loading ITLB entries from UTLB has to be simulated correctly. For that the QEMU TLB has to be handle the execute (ITLB) and read/write permissions (UTLB) seperately. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09target-sh4: MMU: fix store queue addressesAurelien Jarno
The store queues are located from 0xe0000000 to 0xe3ffffff. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09target-sh4: MMU: remove dead codeAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09target-sh4: MMU: optimize UTLB accessesAurelien Jarno
With the current code, the QEMU TLB is setup to match the read/write mode of the MMU fault. This means when read access is done, the page is setup in read-only mode. When the page is later accessed in write mode, an MMU fault happened, and the page is switch in write-only mode. This flip-flop causes a lot of calls to the MMU code and slow down the emulation. This patch changes the MMU emulation, so that the QEMU TLB is setup to match the UTLB protection key. This impressively increase the speed of the emulation. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09target-sh4: MMU: fix ITLB priviledge checkAurelien Jarno
There is an ITLB access violation if SR_MD=0 (user mode) while the high bit of the protection key is 0 (priviledge mode). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09target-sh4: MMU: simplify call to tlb_set_page()Aurelien Jarno
tlb_set_page() doesn't need addresses with offset, but simply the page aligned addresses. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-02-09sh7750: handle MMUCR TI bitAurelien Jarno
When the MMUCR TI bit is set, all the UTLB and ITLB entries should be flushed. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-13Include assert.h from qemu-common.hPaul Brook
Include assert.h from qemu-common.h and remove other direct uses. cpu-all.h still need to include it because of the dyngen-exec.h hacks Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-03SH: Fix linux-user _is_cached typo.edgar_igl
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6970 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-03SH: Add cpu_sh4_is_cached for linux-user.edgar_igl
The entire U0 area is assumed to be cacheable. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6969 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-01SH: Improve movca.l/ocbi emulation.edgar_igl
Author: Vladimir Prus <vladimir@codesourcery.com> Fix movcal.l/ocbi emulation. * target-sh4/cpu.h (memory_content): New. (CPUSH4State): New fields movcal_backup and movcal_backup_tail. * target-sh4/helper.h (helper_movcal) (helper_discard_movcal_backup, helper_ocbi): New. * target-sh4/op_helper.c (helper_movcal) (helper_discard_movcal_backup, helper_ocbi): New. * target-sh4/translate.c (DisasContext): New field has_movcal. (sh4_defs): Update CVS for SH7785. (cpu_sh4_init): Initialize env->movcal_backup_tail. (_decode_opc): Discard movca.l-backup. Make use of helper_movcal and helper_ocbi. (gen_intermediate_code_internal): Initialize has_movcal to 1. Thanks to Shin-ichiro KAWASAKI and Paul Mundt for valuable feedback. Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6966 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03SH4: Fixed last UTLB unused and URB/URC managementaurel32
Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6675 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03SH4: Fixed last UTLB unusedaurel32
Version 2 of the patch. Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6672 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03SH4: Fixed last UTLB unusedaurel32
With my previous patch (the one monitoring tlb), I found that the last TLB entry was never use. Here a little fix. Signed-off-by: Lionel Landwerlin <lionel.landwerlin@openwide.fr> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6671 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-03clean build: Fix remaining sh4 warningsaurel32
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6668 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-15global s/loglevel & X/qemu_loglevel_mask(X)/ (Eduardo Habkost)aliguori
These are references to 'loglevel' that aren't on a simple 'if (loglevel & X) qemu_log()' statement. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6340 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-15Convert references to logfile/loglevel to use qemu_log*() macrosaliguori
This is a large patch that changes all occurrences of logfile/loglevel global variables to use the new qemu_log*() macros. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel32
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-10target-sh4: Add SH bit handling to TLBaurel32
This patch adds SH bit handling to sh4's TLB, which is a part of MMU functionality that had not been implemented in qemu. Additionally, increment_urc() call in cpu_load_tlb() is deleted, because the specification explicitly says that URC is not incremented by an LDTLB instruction (at Section 3 of SH7751 Hardware manual(REJ09B0370-0400)). Even though URC is not needed to be strictly same as HW because it is a random number, this condition is not negligible. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5971 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07SH4: Eliminate P4 to A7 mangling (Takashi YOSHII).balrog
Main purpose of this is to delete *physical = address & 0x1fffffff; at target-sh4/helper.c:449, using new mmio rule introduced by #5849 This masking is a nice trick to realize P4/A7 duality of SH registers. But, IMHO, it is logically wrong. Most of SH4 cpu control registers in P4 area(0xfc000000...0xffffffff) have one more address called A7 which is usually P4 address with upper 3bits masked. This is an address only appears in TLB's physical address part. Current code use trick writing drivers as if they are really in A7 (that's why you see many *_A7 in hw/sh*.c), and using translation P4 to A7. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5935 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-07SH: On-chip PCI controller support (Takashi YOSHII).balrog
This patch adds SuperH on-chip PCI controller(PCIC) support. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5927 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-21target-sh4: fix TLB/MMU emulationaurel32
Based on a patch from Vladimir Prus and comments from Shin-ichiro KAWASAKI. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5770 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 07:22:21 +0000