aboutsummaryrefslogtreecommitdiff
path: root/target-s390x
AgeCommit message (Collapse)Author
2013-06-12KVM: S390: Add dummy kvm_arch_init_irq_routing()Alexey Kardashevskiy
The common KVM code insists on calling kvm_arch_init_irq_routing() as soon as it sees kernel header support for it (regardless of whether QEMU supports it). Provide a dummy function to satisfy this. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-01Remove unnecessary break statementsStefan Weil
Fix these warnings from cppcheck: hw/display/cirrus_vga.c:2603: hw/sd/sd.c:348: hw/timer/exynos4210_mct.c:1033: target-arm/translate.c:9886: target-s390x/mem_helper.c:518: target-unicore32/translate.c:1936: style: Consecutive return, break, continue, goto or throw statements are unnecessary. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-05-24s390x: reduce TARGET_PHYS_ADDR_SPACE_BITS to 62Paolo Bonzini
With the next patch, the memory API will complain if the TARGET_PHYS_ADDR_SPACE_BITS gets dangerously close to an overflow. s390x can handle up to 64 bit of physical address space from its page tables, but we never use that much. Just decrease the value. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-05-14osdep, kvm: rename low-level RAM allocation functionsPaolo Bonzini
This is preparatory to the introduction of a separate freeing API. Reported-by: Amos Kong <akong@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-05-01Trivial grammar and spelling fixesStefan Weil
similiar -> similar recieve -> receive transfered -> transferred preperation -> preparation Most changes are in comments, one modifies a parameter name in a function prototype. The spelling fixes were made using codespell. Signed-off-by: Stefan Weil <sw@weilnetz.de> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-04-30Wire up disabled wait a panicked event on s390Christian Borntraeger
On s390 the disabled wait state indicates a state of attention. For example Linux uses that state after a panic. Lets put the system into panicked state. An alternative implementation would be to state disabled-wait <address> instead of pause in the action field. (e.g. z/OS, z/VM and other classic OSes use the address of the disabled wait to indicate an error code). Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 6cf41156322e27e81a727b69f03728dbc225d5bb.1366945969.git.hutao@cn.fujitsu.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-04-26Utilize selective runtime reg sync for hot code pathsJason J. Herne
Make use of new kvm_s390_get_registers_partial() for kvm_handle_css_inst() and handle_hypercall() since they only need registers from the partial set and they are called quite frequently. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26Allow selective runtime register synchronizationJason J. Herne
We want to avoid expensive register synchronization IOCTL's on the hot path so a new kvm_s390_get_registers_partial() is introduced as a compliment to kvm_arch_get_registers(). The new function is called on the hot path, and kvm_arch_get_registers() is called when we need the complete runtime register state. kvm_arch_put_registers() is updated to only sync the partial runtime set when we've only dirtied the partial runtime set. This is to avoid sending bad data back to KVM if we've only partially synced the runtime register set. Signed-off-by: Jason J. Herne <jjherne@us.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-04-26s390x: use CONFIG_INT128 to detect __uint128_tGabriel Kerneis
Target s390x uses ad-hoc macro magic to guess if the compiler supports the GCC extension __uint128_t. This patch uses the the dedicated macro CONFIG_INT128 defined by configure instead. This fixes compilation with the CIL source code analyzer, which uses GCC as a preprocessor but does not support __uint128_t. Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-12Typo, spelling and grammatical fixesPeter Maydell
Minor fixes to documentation and code comments. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-05target-s390: Fix SRNMTRichard Henderson
Fallthough into abort = oops. Cc: qemu-trivial@nongnu.org Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-22Fix typos and misspellingsPeter Maydell
Fix various typos and misspellings. The bulk of these were found with codespell. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-03-17s390: Fix cpu refactoring fallout.Cornelia Huck
Commit 259186a7 "cpu: Move halted and interrupt_request fields to CPUState" seems to have missed one instance in target-s390x/kvm.c: /home/cohuck/git/qemu/target-s390x/kvm.c: In function ‘kvm_arch_process_async_events’: /home/cohuck/git/qemu/target-s390x/kvm.c:319: error: ‘CPUS390XState’ has no member named ‘halted’ /home/cohuck/git/qemu/target-s390x/kvm.c:320: warning: control reaches end of non-void function make[1]: *** [target-s390x/kvm.o] Error 1 Let's just switch to cs->halted. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Alexander Graf <agraf@suse.de> Acked-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Pass CPUState to cpu_interrupt()Andreas Färber
Move it to qom/cpu.h to avoid issues with include order. Change pc_acpi_smi_interrupt() opaque to X86CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-08s390/css: Fix subchannel detectionChristian Borntraeger
We have to consider the m bit to find the real channel subsystem when determining the last subchannel. If we fail to take this into account, removal of a subchannel in the middle of a big list of devices will stop device detection after a reboot. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-08s390: simplify kvm cpu initChristian Borntraeger
There is no special code right now and the reset ioctl is done later on in the the reset handler anyway. Lets simplify the cpu init. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-03gen-icount.h: Rename gen_icount_start/end to gen_tb_start/endPeter Maydell
The gen_icount_start/end functions are now somewhat misnamed since they are useful for generic "start/end of TB" code, used for more than just icount. Rename them to gen_tb_start/end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-03cpu: Introduce ENV_OFFSET macrosAndreas Färber
Introduce ENV_OFFSET macros which can be used in non-target-specific code that needs to generate TCG instructions which reference CPUState fields given the cpu_env register that TCG targets set up with a pointer to the CPUArchState struct. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-s390x: Use mulu2 for mlgr insnRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16target-s390x: Drop unused cpu_s390x_close() prototypeAndreas Färber
It was never implemented. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16cpu: Add CPUArchState pointer to CPUStateAndreas Färber
The target-specific ENV_GET_CPU() macros have allowed us to navigate from CPUArchState to CPUState. The reverse direction was not supported. Avoid introducing CPU_GET_ENV() macros by initializing an untyped pointer that is initialized in derived instance_init functions. The field may not be called "env" due to it being poisoned. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-s390x: Move TCG initialization to S390CPU initfnAndreas Färber
Ensures that a QOM-created S390CPU is usable. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-s390x: Introduce QOM realizefn for S390CPUAndreas Färber
Introduce realizefn and set realized = true in cpu_s390x_init(). Defer CPU reset from initfn to realizefn. Acked-by: Richard Henderson <rth@twiddle.net> [AF: Invoke parent's realizefn] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-13s390: Fix handling of iscs.Cornelia Huck
There are two ways to express an interruption subclass: - As a bitmask, as used in cr6. - As a number, as used in the I/O interruption word. Unfortunately, we have treated to I/O interruption word as if it contained the bitmask as well, which went unnoticed so far as - (queued-for-next) kvm made the same mistake, and - Linux guest kernels don't check the isc value in the I/O interruption word for subchannel interrupts. Make sure that we treat the I/O interruption word correctly. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-13s390: Keep I/O interrupts enabled for all iscs.Cornelia Huck
do_io_interrupt() would stop scanning further iscs if it found an I/O interrupt it could inject. This might cause the pending interrupt indication for I/O interrupts to be reset although there might be queued I/O interrupts for subsequent iscs. Fix this by reordering the logic: Inject the I/O interrupt immediately and continue searching all iscs for queued interrupts. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-04target-s390x: Fix wrong comparison in interrupt handlingStefan Weil
gcc with -Wextra complains about an ordered pointer comparison: target-s390x/helper.c:660:27: warning: ordered comparison of pointer with integer zero [-Wextra] Obviously the index was missing in the code. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-04s390x: silence warning from GCC on uninitialized valuesAnthony Liguori
As best I can tell, this is a false positive. [aliguori@ccnode4 qemu-s390]$ make CC s390x-softmmu/target-s390x/helper.o /home/aliguori/git/qemu/target-s390x/helper.c: In function ‘do_interrupt’: /home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘addr’ may be used uninitialized in this function [-Werror=maybe-uninitialized] /home/aliguori/git/qemu/target-s390x/helper.c:620:20: note: ‘addr’ was declared here /home/aliguori/git/qemu/target-s390x/helper.c:673:17: error: ‘mask’ may be used uninitialized in this function [-Werror=maybe-uninitialized] /home/aliguori/git/qemu/target-s390x/helper.c:620:14: note: ‘mask’ was declared here cc1: all warnings being treated as errors make[1]: *** [target-s390x/helper.o] Error 1 make: *** [subdir-s390x-softmmu] Error 2 Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-01Merge remote-tracking branch 'agraf/s390-for-upstream' into stagingAnthony Liguori
# By Andreas Färber # Via Alexander Graf * agraf/s390-for-upstream: target-s390x: Pass S390CPU to s390_{add, del}_running_cpu() target-s390x: Clean up cpu_inject_*() signatures target-s390x: Fix debug output target-s390x: Fix debug output (continued)
2013-02-01target-s390x: Pass S390CPU to s390_{add, del}_running_cpu()Andreas Färber
This prepares for moving the halted field to CPUState. Most call sites can already supply S390CPU, for some env becomes unused. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Clean up cpu_inject_*() signaturesAndreas Färber
Despite cautioning that S390CPU is needed for upcoming CPUState refactorings, commit 5d69c547d947798cba92d836d06f6e017ba2b19d (s390: I/O interrupt and machine check injection.) added functions cpu_inject_io() and cpu_inject_crw_mchk() with CPUS390XState argument, claiming consistency with cpu_inject_ext(). This complicates making cpu_interrupt() take a CPUState even more and it required to pass &cpu->env from some S390CPU-aware call sites already, creating inconsistency elsewhere. Address that. This also eliminates the need for CPUS390XState in s390_virtio_irq(). Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Fix debug outputAndreas Färber
Commit 71e470886fb6092504503a5fe41092ace71c096c (target-s390x: fix style) renamed the cpu_s390x_handle_mmu_fault() argument from _vaddr to orig_vaddr. Update the debug output code. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Fix debug output (continued)Andreas Färber
Since its introduction in d5a439645a5a70fed5431318c3bce9dc2caa950f (s390x: helper functions for system emulation) the variable name was raddr. Fix this. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-02-01target-s390x: Mark as unmigratableAndreas Färber
CPU_SAVE_VERSION was undefined, so "cpu_common" VMState and cpu_{save,load}() were not registered. They were no-ops. Therefore there is no backwards compatibility to keep, so we can mark S390CPU as unmigratable at device level. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Juan Quintela <quintela@redhat.com>
2013-01-29s390: Use s390_cpu_physical_memory_map for tpi.Cornelia Huck
Map the I/O interruption code before calling into css. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Wire up channel I/O in kvm.Cornelia Huck
Trigger the code for our virtual css in case of instruction intercepts for I/O instructions. Handle the tsch exit for the subchannel-related part of tsch. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Virtual channel subsystem support.Cornelia Huck
Provide a mechanism for qemu to provide fully virtual subchannels to the guest. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Add channel I/O instructions.Cornelia Huck
Provide handlers for (most) channel I/O instructions. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: I/O interrupt and machine check injection.Cornelia Huck
I/O interrupts are queued per isc. Only crw pending machine checks are supported. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Channel I/O basic definitions.Cornelia Huck
Basic channel I/O structures and helper function. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Add mapping helper functions.Cornelia Huck
Add s390_cpu_physical_memory_{map,unmap} with special handling for the lowcore. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-29s390: Lowcore mapping helper.Cornelia Huck
Create a lowcore mapping helper that includes a check for sufficient length. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-27kvm: Create kvm_arch_vcpu_id() functionEduardo Habkost
This will allow each architecture to define how the VCPU ID is set on the KVM_CREATE_VCPU ioctl call. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-18s390: Add a hypercall registration interface.Cornelia Huck
Allow virtio machines to register for different diag500 function codes and convert s390-virtio to use it. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18target-s390x: Unregister reset callback on finalizationAndreas Färber
Since commit "s390: Add CPU reset handler" the CPU's instance_init registers a reset callback. Unregister that on instance_finalize. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18s390x: fix indentationAlexander Graf
In one of the last commits we accidently got 3-space indentation into the tree. Fix it up so it's 4 spaces wide. Reported-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18s390: Add CPU reset handlerJens Freimann
Add a CPU reset handler to have all CPUs in a PoP compliant state. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> [agraf: move hw/hw.h into existing ifdef] Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18s390x: Remove inline function ebcdic_put and related data from cpu.hStefan Weil
The function is only used in misc_helper.c, so move it to that file. This reduces the size of debug executables (compiled without optimization) because they get unused code and data for each compilation which includes cpu.h. Executables with optimization don't change their size. ebcdic2ascii is currently unused and could be removed (not done here). The array ascii2ebcdic must be accessed with an unsigned index, therefore (int)ascii[i] was replaced by (uint8_t)ascii[i]. The old code would have failed for a signed char less than 0. The current code only converts "QEMU" and spaces to EBCDIC, so there is no problem today. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2013-01-18S390: Enable -cpu help and QMP query-cpu-definitionsViktor Mihajlovski
This enables qemu -cpu help to return a list of supported CPU models on s390 and also to query for cpu definitions in the monitor. Initially only cpu model = host is returned. This needs to be reworked into a full-fledged CPU model handling later on. This change is needed to allow libvirt exploiters (like OpenStack) to specify a CPU model. Signed-off-by: Viktor Mihajlovski <mihajlov@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [agraf: fix s390x-linux-user, adjust header locations] Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 22:51:38 +0000