aboutsummaryrefslogtreecommitdiff
path: root/target-s390x
AgeCommit message (Collapse)Author
2012-09-27target-s390x: Tidy cpu_dump_stateRichard Henderson
The blank lines inside the single dump make it difficult for the eye to pick out the block. Worse, with interior newlines, but no blank line following, the PSW line appears to belong to the next dump block. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-27target-s390x: Avoid double CPU_LOG_TB_CPURichard Henderson
This is already handled generically in cpu_exec. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-27target-s390x: Use CPU_LOG_INTRichard Henderson
Three places in the interrupt code did we not honor the mask. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-27target-s390x: Call tcg_gen_debug_insn_startRichard Henderson
Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-09-15target-s390x: avoid cpu_single_envBlue Swirl
Pass around CPUState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-09-10target-s390x: switch to AREG0 free modeBlue Swirl
Add an explicit CPUState parameter instead of relying on AREG0. Remove temporary wrappers and switch to AREG0 free mode. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix conflicts] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for misc helpersBlue Swirl
Make misc helpers take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix conflict] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for condition code helpersBlue Swirl
Make condition code helpers take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for integer helpersBlue Swirl
Make integer helpers take a parameter for CPUState instead of relying on global env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: avoid AREG0 for FPU helpersBlue Swirl
Make FPU helpers take a parameter for CPUState instead of relying on global env. Introduce temporary wrappers for FPU load and store ops. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: rename op_helper.c to misc_helper.cBlue Swirl
Now op_helper.c contains miscellaneous helpers, rename it to misc_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fix conflict] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split memory access helpersBlue Swirl
Move memory access helpers to mem_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> [agraf: fold softmmu include ifdefs together] Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split integer helpersBlue Swirl
Move integer helpers to int_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split condition code helpersBlue Swirl
Move condition code helpers to cc_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: split FPU opsBlue Swirl
Move floating point instructions to fpu_helper.c. While exporting some condition code helpers, avoid duplicate identifier conflict with translate.c. Remove unused set_cc_nz_f64() in translate.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-09-10target-s390x: fix styleBlue Swirl
Before splitting op_helper.c and helper.c in the next patches, fix style issues. No functional changes. Replace also GCC specific __FUNCTION__ with standard __func__. Don't init static variable (cpu_s390x_init:inited) with 0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15s390: provide interface for service interrupt/introduce interrupt.cChristian Borntraeger
This patch creates interrupt.c. The first user is a callback for hw/* code to trigger an service interrupt for a given sccb value. Several interrupt types for s390 are floating (can be delivered to all CPUs). so this code does not belong to a specific CPU. Other interrupts (like the virtio one) are also floating and can be moved here later on. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-08-15s390: Fix error handling and condition code of service callChristian Borntraeger
Invalid sccb addresses will cause specification or addressing exception. Lets add those checks. Furthermore, the good case (cc=0) was incorrect for KVM, we did not set the CC at all. We now use return codes < 0 as program checks and return codes > 0 as condition code values. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-07-10s390: autodetect map privateChristian Borntraeger
By default qemu will use MAP_PRIVATE for guest pages. This will write protect pages and thus break on s390 systems that dont support this feature. Therefore qemu has a hack to always use MAP_SHARED for s390. But MAP_SHARED has other problems (no dirty pages tracking, a lot more swap overhead etc.) Newer systems allow the distinction via KVM_CAP_S390_COW. With this feature qemu can use the standard qemu alloc if available, otherwise it will use the old s390 hack. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Acked-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-24Merge branch 's390-for-upstream' of git://repo.or.cz/qemu/agrafBlue Swirl
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf: s390: stop target cpu on sigp initial reset s390: make kvm_stat work on s390 kvm: Update kernel headers s390x: fix s390 virtio aliases
2012-06-21qemu-log: use LOG_UNIMP for some target CPU casesBlue Swirl
Use LOG_UNIMP for some target CPU cases. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Alexander Graf <agraf@suse.de>
2012-06-18s390: stop target cpu on sigp initial resetChristian Borntraeger
We must not run the target cpu after an initial reset. This makes system_reset more reliable for smp guests. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-06-11target-s390x: Pass S390CPU to s390_cpu_restart()Andreas Färber
Needed for qemu_cpu_kick(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-11s390-virtio: Let s390_cpu_addr2state() return S390CPUAndreas Färber
Convert ipi_states to S390CPU**. Needed for s390_cpu_restart() in handle_sigp(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-11target-s390x: Let cpu_s390x_init() return S390CPUAndreas Färber
Let cpu_init() return CPUS390XState for backwards compatibility. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-06-07build: move other target-*/ objects to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move libobj-y variable to nested Makefile.objsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-07build: move obj-TARGET-y variables to nested Makefile.objsPaolo Bonzini
Also drop duplicate occurrence of device-hotplug.o. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-06-04Kill off cpu_state_reset()Andreas Färber
In commit 1bba0dc932e8826a7d030df3767daf0bc339f9a2 cpu_reset() was renamed to cpu_state_reset(), to allow introducing a new cpu_reset() that would operate on QOM objects. All callers have been updated except for one in target-mips, so drop all implementations except for the one in target-mips and move the declaration there until MIPSCPU reset can be fully QOM'ified. Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Acked-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> (for mb + cris) Acked-by: Alexander Graf <agraf@suse.de> (for ppc) Acked-by: Blue Swirl <blauwirbel@gmail.com>
2012-05-01S390: dont call system_shutdown on disabled waitChristian Borntraeger
A disabled wait usually indicates a guest problem. Dont shutdown the guest to allow guest dumping. Have some special cases, e.g. a quiesce disabled wait. In that case we want to shutdown. Long term solution might be a crashed/panic indication. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-05-01S390: support reboot for kvm on s390Jens Freimann
This patch adds reboot support for s390x-softmmu by calling the generic reboot support in kvm. Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-04-14Use uintptr_t for various op related functionsBlue Swirl
Use uintptr_t instead of void * or unsigned long in several op related functions, env->mem_io_pc and GETPC() macro. Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-04target-s390x: Update s390x_{tod,cpu}_timer() to use S390CPUAndreas Färber
In place of CPUS390XState pass S390CPU as opaque from the new initfn. cpu_interrupt() is anticipated to take a CPUState in the future. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPU initAndreas Färber
Move code from cpu_s390x_init() into an initfn. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() to s390_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPUAndreas Färber
Embed CPUS390XState as first member of S390CPU. Since -cpu is being ignored, make TYPE_S390_CPU non-abstract. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-03-14Rename CPUState -> CPUArchStateAndreas Färber
Scripted conversion: for file in *.[hc] hw/*.[hc] hw/kvm/*.[hc] linux-user/*.[hc] linux-user/m68k/*.[hc] bsd-user/*.[hc] darwin-user/*.[hc] tcg/*/*.[hc] target-*/cpu.h; do sed -i "s/CPUState/CPUArchState/g" $file done All occurrences of CPUArchState are expected to be replaced by QOM CPUState, once all targets are QOM'ified and common fields have been extracted. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14target-s390x: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUS390XState/g" target-s390x/*.[hc] sed -i "s/#define CPUS390XState/#define CPUState/" target-s390x/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-05Move helpers.h to helper.hLluís Vilanova
Provides a file naming scheme consistent with other targets. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-02-28target-s390x: Clean includesStefan Weil
The change in cpu.h is needed when HOST_LONG_BITS is defined in qemu-common.h. Signed-off-by: Stefan Weil <sw@weilnetz.de>
2012-01-04s390: fix cpu hotplug / cpu activity on interruptsChristian Borntraeger
The add_del/running_cpu code and env->halted are tracking stopped cpus. Sleeping cpus (idle and enabled for interrupts) are waiting inside the kernel. No interrupt besides the restart can move a cpu from stopped to operational. This is already handled over there. So lets just remove the bogus wakup from the common interrupt delivery, otherwise any interrupt will wake up a cpu, even if this cpu is stopped (Thus leading to strange hangs on sigp restart) This fixes echo 0 > /sys/devices/system/cpu/cpu0/online echo 1 > /sys/devices/system/cpu/cpu0/online in the guest Signed-off-by: Christian Borntraeger<borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2012-01-04s390x: add TR function for EXECUTEAlexander Graf
Newer gcc versions (or glibc?) also generate code that tries to EXECUTE the TR opcode. Implement it so that we don't break valid guests. Reported-by: Andreas Faerber <afaerber@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-12-14Fix spelling in comments, documentation and messagesStefan Weil
accidently->accidentally annother->another choosen->chosen consideres->considers decriptor->descriptor developement->development paramter->parameter preceed->precede preceeding->preceding priviledge->privilege propogation->propagation substraction->subtraction throught->through upto->up to usefull->useful Fix also grammar in posix-aio-compat.c Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-12-06fix typo: delete redundant semicolonDong Xu Wang
Double semicolons should be single. Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-11-14s390x: Add shutdown for TCG s390-virtio machineAlexander Graf
Now that we have code in place to do refcounting of online CPUs, we can drag the TCG code along and implement shutdown for that one too, so it doesn't feel left out by its KVM counterpart. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14s390: Fix cpu shutdown for KVMChristian Borntraeger
On s390 a shutdown is the state of all CPUs being either stopped or disabled (for interrupts) waiting. We have to track the overall number of running CPUs to call the shutdown sequence accordingly. This patch implements the counting and shutdown handling for the kvm path in qemu. Lets also wrap changes to env->halted and env->exception_index. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14s390x: implement SIGP restart and shutdownAlexander Graf
An s390x OS does reboot and shutdown triggers through hypercalls that we didn't implement on the TCG backend yet. That means that so far we couldn't shut down virtual machines for example, having them hang on shutdown when not using KVM. With this patch, this restriction is gone. We can now shut down and reboot s390x virtual machines even when using the TCG backend. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14s390x: implement rrbe instruction properlyAlexander Graf
The rrbe instruction resets the reference bit in the given storage key. So far, we merely made it a nop and also returned an invalid CC value, so that the kernel never knew if a page actually got accessed. This patch implements it properly, flushing the R bit and returning the correct CC value. Signed-off-by: Alexander Graf <agraf@suse.de>
2011-11-14s390x: update R and C bits in storage keyAlexander Graf
When the s390x maps a page or writes happen to a page, the R and C bits get updated. The easiest way to implement this in qemu is to simply update them whenever we map a TLB translation and act according to the permissions. Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 01:11:27 +0000