| Age | Commit message (Collapse) | Author |
|---|
|
This patch modifies SoftFloat library so that it can be configured in
run-time in relation to the meaning of signaling NaN bit, while, at the
same time, strictly preserving its behavior on all existing platforms.
Background:
In floating-point calculations, there is a need for denoting undefined or
unrepresentable values. This is achieved by defining certain floating-point
numerical values to be NaNs (which stands for "not a number"). For additional
reasons, virtually all modern floating-point unit implementations use two
kinds of NaNs: quiet and signaling. The binary representations of these two
kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally,
the first bit of mantissa).
Up to 2008, standards for floating-point did not specify all details about
binary representation of NaNs. More specifically, the meaning of the bit
that is used for distinguishing between signaling and quiet NaNs was not
strictly prescribed. (IEEE 754-2008 was the first floating-point standard
that defined that meaning clearly, see [1], p. 35) As a result, different
platforms took different approaches, and that presented considerable
challenge for multi-platform emulators like QEMU.
Mips platform represents the most complex case among QEMU-supported
platforms regarding signaling NaN bit. Up to the Release 6 of Mips
architecture, "1" in signaling NaN bit denoted signaling NaN, which is
opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture
adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of
that, Mips architecture for SIMD (also known as MSA, or vector instructions)
also specifies signaling bit in accordance to IEEE standard. MSA unit can be
implemented with both pre-Release 6 and Release 6 main processor units.
QEMU uses SoftFloat library to implement various floating-point-related
instructions on all platforms. The current QEMU implementation allows for
defining meaning of signaling NaN bit during build time, and is implemented
via preprocessor macro called SNAN_BIT_IS_ONE.
On the other hand, the change in this patch enables SoftFloat library to be
configured in run-time. This configuration is meant to occur during CPU
initialization, at the moment when it is definitely known what desired
behavior for particular CPU (or any additional FPUs) is.
The change is implemented so that it is consistent with existing
implementation of similar cases. This means that structure float_status is
used for passing the information about desired signaling NaN bit on each
invocation of SoftFloat functions. The additional field in float_status is
called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE.
IMPORTANT:
This change is not meant to create any change in emulator behavior or
functionality on any platform. It just provides the means for SoftFloat
library to be used in a more flexible way - in other words, it will just
prepare SoftFloat library for usage related to Mips platform and its
specifics regarding signaling bit meaning, which is done in some of
subsequent patches from this series.
Further break down of changes:
1) Added field snan_bit_is_one to the structure float_status, and
correspondent setter function set_snan_bit_is_one().
2) Constants <float16|float32|float64|floatx80|float128>_default_nan
(used both internally and externally) converted to functions
<float16|float32|float64|floatx80|float128>_default_nan(float_status*).
This is necessary since they are dependent on signaling bit meaning.
At the same time, for the sake of code cleanup and simplicity, constants
<floatx80|float128>_default_nan_<low|high> (used only internally within
SoftFloat library) are removed, as not needed.
3) Added a float_status* argument to SoftFloat library functions
XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_),
XXX_maybe_silence_nan(XXX a_). This argument must be present in
order to enable correct invocation of new version of functions
XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128>
here)
4) Updated code for all platforms to reflect changes in SoftFloat library.
This change is twofolds: it includes modifications of SoftFloat library
functions invocations, and an addition of invocation of function
set_snan_bit_is_one() during CPU initialization, with arguments that
are appropriate for each particular platform. It was established that
all platforms zero their main CPU data structures, so snan_bit_is_one(0)
in appropriate places is not added, as it is not needed.
[1] "IEEE Standard for Floating-Point Arithmetic",
IEEE Computer Society, August 29, 2008.
Signed-off-by: Thomas Schwinge <thomas@codesourcery.com>
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com>
Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com>
Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Tested-by: Leon Alrae <leon.alrae@imgtec.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[leon.alrae@imgtec.com:
* cherry-picked 2 chunks from patch #2 to fix compilation warnings]
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
|
|
Information is tracked inside the TCGContext structure, and later used
by tracing events with the 'tcg' and 'vcpu' properties.
The 'cpu' field is used to check tracing of translation-time
events ("*_trans"). The 'tcg_env' field is used to pass it to
execution-time events ("*_exec").
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 146549350162.18437.3033661139638458143.stgit@fimbulvetr.bsc.es
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The arm target was handled by 06486077, but other targets
were ignored. This handles all the rest which actually support
disassembly (that is, skipping moxie and tilegx).
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
exec-all.h contains TCG-specific definitions. It is not needed outside
TCG-specific files such as translate.c, exec.c or *helper.c.
One generic function had snuck into include/exec/exec-all.h; move it to
include/qom/cpu.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In user mode, there's only a static address translation, TBs are always
invalidated properly and direct jumps are reset when mapping change.
Thus the destination address is always valid for direct jumps and
there's no need to restrict it to the pages the TB resides in.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Cc: Riku Voipio <riku.voipio@iki.fi>
Cc: Blue Swirl <blauwirbel@gmail.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
We don't take care of direct jumps when address mapping changes. Thus we
must be sure to generate direct jumps so that they always keep valid
even if address mapping changes. Luckily, we can only allow to execute a
TB if it was generated from the pages which match with current mapping.
Document tcg_gen_goto_tb() declaration and note the reason for
destination PC limitations.
Some targets with variable length instructions allow TB to straddle a
page boundary. However, we make sure that both of TB pages match the
current address mapping when looking up TBs. So it is safe to do direct
jumps into the both pages. Correct the checks for some of those targets.
Given that, we can safely patch a TB which spans two pages. Remove the
unnecessary check in cpu_exec() and allow such TBs to be patched.
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The
tracing infrastructure later needs to differentiate between regular
pointers and pointers to vCPUs.
Also changes all targets to use the new 'TCGv_env' type instead of the
generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env'
translates into 'TCGv_ptr'), but that could change in the future to
enforce the difference.
Note that a 'TCGv_env' type (for 'CPUState') is not added, since all
helpers currently receive the architecture-specific
pointer ('CPUArchState').
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Acked-by: Richard Henderson <rth@twiddle.net>
Message-id: 145641859552.30295.7821536833590725201.stgit@localhost
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Thus, use cpu_env as the parameter, not TCG_AREG0 directly.
Update all uses in the translators.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Split the bits that require it to exec/log.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1452174932-28657-8-git-send-email-den@openvz.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1453832250-766-8-git-send-email-peter.maydell@linaro.org
|
|
Some targets already had this within their logic, but make sure
it's present for all targets.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Do away with TB retranslation
# gpg: Signature made Wed 07 Oct 2015 10:42:08 BST using RSA key ID 4DD0279B
# gpg: Good signature from "Richard Henderson <rth7680@gmail.com>"
# gpg: aka "Richard Henderson <rth@redhat.com>"
# gpg: aka "Richard Henderson <rth@twiddle.net>"
* remotes/rth/tags/pull-tcg-20151007: (26 commits)
tcg: Adjust CODE_GEN_AVG_BLOCK_SIZE
tcg: Check for overflow via highwater mark
tcg: Allocate a guard page after code_gen_buffer
tcg: Emit prologue to the beginning of code_gen_buffer
tcg: Remove tcg_gen_code_search_pc
tcg: Remove gen_intermediate_code_pc
tcg: Save insn data and use it in cpu_restore_state_from_tb
tcg: Pass data argument to restore_state_to_opc
tcg: Add TCG_MAX_INSNS
target-*: Drop cpu_gen_code define
tcg: Merge cpu_gen_code into tb_gen_code
target-sparc: Add npc state to insn_start
target-sparc: Remove gen_opc_jump_pc
target-sparc: Split out gen_branch_n
target-sparc: Tidy gen_branch_a interface
target-cris: Mirror gen_opc_pc into insn_start
target-sh4: Add flags state to insn_start
target-s390x: Add cc_op state to insn_start
target-mips: Add delayed branch state to insn_start
target-i386: Add cc_op state to insn_start
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
It is no longer used, so tidy up everything reached by it.
This includes the gen_opc_* arrays, the search_pc parameter
and the inline gen_intermediate_code_internal functions.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The gen_opc_* arrays are already redundant with the data stored in
the insn_start arguments. Transition restore_state_to_opc to use
data from the latter.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Adjust all translators to respect it.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reduce the boilerplate required for each target. At the same time,
move the test for breakpoint after calling tcg_gen_insn_start.
Note that arm and aarch64 do not use cpu_breakpoint_test, but still
move the inline test down after tcg_gen_insn_start.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
This does tidy the icount test common to all targets.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
While we're at it, emit the opcode adjacent to where we currently
record data for search_pc. This puts gen_io_start et al on the
"correct" side of the marker.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
With an eye toward making it mandatory.
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
We want
F12=0000000000000000 F13=0000000000000000 F14=0000000000000000 F15=0000000000000000
V00=00000000000000000000000000000000 V01=00000000000000000000000000000000
instead of
F12=0000000000000000 F13=0000000000000000 F14=0000000000000000 F15=0000000000000000
V00=00000000000000000000000000000000
V01=00000000000000000000000000000000 V02=00000000000000000000000000000000
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com>
Message-Id: <1443689387-34473-5-git-send-email-jfrei@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Replacing it with tcg_gen_extrl_i64_i32.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
disas does not need to access the CPU env for any reason. Change the
APIs to accept CPU pointers instead. Small change pattern needs to be
applied to all target translate.c. This brings us closer to making
disas.o a common-obj and less architecture specific in general.
Cc: Richard Henderson <rth@twiddle.net>
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Eduardo Habkost <ehabkost@redhat.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com>
Acked-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This patch adds support for PER Breaking-Event-Address register. Like
real hardware, it save the current PSW address when the PSW address is
changed by an instruction. We have to take care of optimizations QEMU
does, a branch to the next instruction is still a branch.
This register is copied to low core memory when a program exception
happens.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For the PER instruction-fetch, we can't use the QEMU breakpoint
infrastructure as it triggers for a single address and not a full
address range, and as it actually stop before the instruction and
not before.
We therefore call an helper with the just fetched instruction address,
which check if the address is within the PER address range. If it is
the case, an event is recorded and will be signaled through an
exception.
Note that we implement here the PER-3 behaviour, that is an invalid
opcode is not considered as an instruction fetch. Without PER-3 this
behavious is undefined.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For the PER successful-branching event support, we can't rely on any
QEMU infrastucture. We therefore call an helper in all places where
a branch can be taken. We have to pay attention to the branch to next
case, as it's still a taken branch.
We don't need to care about the cases using goto_tb, as we have disabled
them in the previous patch.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This patch add basic support to generate PER exceptions. It adds two
fields to the cpu structure to record for the PER address and PER
code & ATMID values. When an exception is triggered and a PER event is
pending, the two PER values are copied to the lowcore area.
At the end of an instruction, an helper is checking for a possible
pending PER event and triggers an exception in that case. For that to
work with branches, we need to disable TB chaining when PER is
activated. Fortunately it's already in the TB flags.
Finally in case of a SERVICE CALL exception, we need to trigger the PER
exception immediately after.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The code handling the I/O instructions for KVM decodes the instruction
itself. In TCG mode also pass the full instruction word to the helpers.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
DIAG IPL is already implemented for KVM, but not wired from TCG. For
that change the format of the instruction so that we can get R1 and R3
numbers in addition to the function code.
The diag function can change plenty of things, including CC, so we
should enter with a static CC. Also it doesn't set the value of general
register 2 to 0 as in the current code. We also need to exit the CPU
loop after a reset, which means a new PSW.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Besides RISBHG and RISBLG, all high-word instructions are not
implemented. Fix that.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
At the same time move the trap code from op_ct into gen_trap and use it
for all new functions. The value needs to be stored back to register
before the exception, but also before the brcond (as we don't use
temp locals). That's why we can't use wout helper.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
RISBGN is the same as RISBG, but without setting the condition code.
CLT and CLGT are the same as CLRT and CLGRT, but using memory for the
second operand.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
It is part of the basic zArchitecture instructions.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
It is part of the basic zArchitecture instructions. Allow it to be call
from EXECUTE.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This is needed to pass the gcc.c-torture/execute/ieee/20010114-2.c test
in the gcc testsuite.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When an operation code is not recognized (ie invalid instruction) an
operation exception should be generated instead of a specification
exception. The latter is for valid opcode, with invalid operands or
modifiers.
This give a very basic GDB support in the guest, as it uses the invalid
opcode 0x0001 to generate a trap.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This complete the general-instructions-extension facility, enable it.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove facility bit]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
When consecutive memory locations are on page boundary a page fault
might occur when using the LOAD MULTIPLE instruction. In that case real
hardware doesn't load any register.
This is an important detail in case the base register is in the list
of registers to be loaded. If a page fault occurs this register might be
overwritten and when the instruction is later restarted the wrong
base register value is useD.
Fix this by first loading the first and last value from memory, hence
triggering all possible page faults, and then the remaining registers.
This fixes random segmentation faults seen in the guest.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Now that movcond exists, it's easy to write (negative-) absolute value
using TCG code instead of an helper.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Commit 7a6c7067f optimized CC computation by only saving cc_op before
calling helpers as they either don't touch the CC or generate a new
static value. This however doesn't work for the EX instruction as the
helper changes or not the CC value depending on the actual executed
instruction (e.g. MVC vs CLC).
This patches force a CC computation before calling the helper. This
fixes random memory corruption occuring in guests.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
[agraf: remove set_cc_static in op_ex as suggested by rth]
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
There are mechanisms to dump registers via the qemu HMP interface,
such as the "info registers" command. Expand this output to dump
the new vector registers.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Handle the actual syncing of the vector registers with kernel space,
via the get/put register IOCTLs.
The vector registers that were introduced with the z13 overlay
the existing floating point registers. FP registers 0-15 are
the high-halves of vector registers 0-15. Thus, remove the
freg fields and replace them with the equivalent vector field
to avoid errors in duplication. Moreover, synchronize either the
vector registers via kvm_sync_regs, or floating point registers
via the GET/SET FPU IOCTLs.
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
Provide a routine to access the correct floating point register,
to simplify future expansion.
Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
|
|
We're currently missing all instructions defined by the "interlocked-access
facility 1" which is part of zEC12. This patch implements all of them except
for LPD and LPDG.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
The store conditional instruction wants to store when the condition
is fulfilled, so we should branch out when it's not true.
The code today branches out when the condition is true, clearly
reversing the logic. Fix it up by negating the condition.
Signed-off-by: Alexander Graf <agraf@suse.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
All of them were reported by codespell.
Most typos are in comments, one is in an error message.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This is improved type checking for the translators -- it's no longer
possible to accidentally swap arguments to the branch functions.
Note that the code generating backends still manipulate labels as int.
With notable exceptions, the scope of the change is just a few lines
for each target, so it's not worth building extra machinery to do this
change in per-target increments.
Cc: Peter Maydell <peter.maydell@linaro.org>
Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Cc: Michael Walle <michael@walle.cc>
Cc: Leon Alrae <leon.alrae@imgtec.com>
Cc: Anthony Green <green@moxielogic.com>
Cc: Jia Liu <proljc@gmail.com>
Cc: Alexander Graf <agraf@suse.de>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Blue Swirl <blauwirbel@gmail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The method by which we count the number of ops emitted
is going to change. Abstract that away into some inlines.
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The function check_privileged() is only used in the softmmu configs;
wrap it in an #ifndef CONFIG_USER_ONLY to avoid clang warnings on the
linux-user builds.
[rth: Remove inline marker too; it was only there to prevent exactly
this warning in GCC.]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1419373100-17690-2-git-send-email-peter.maydell@linaro.org
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
