aboutsummaryrefslogtreecommitdiff
path: root/target-s390x/kvm.c
AgeCommit message (Collapse)Author
2015-06-11s390x/kvm: diag288 instruction interception and handlingXu Wang
Intercept the diag288 requests from kvm guests, and hand the requested command to the diag288 watchdog device for further handling. Signed-off-by: Xu Wang <gesaint@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-09Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150609' into ↵Peter Maydell
staging s390x/virtio-ccw: migration and virtio for 2.4 1. Migration fixups 2. virtio 9pfs # gpg: Signature made Tue Jun 9 09:00:05 2015 BST using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150609: s390x/migration: add comment about floating point migration s390x/kvm: always ignore empty vcpu interrupt state virtio-ccw/migration: Migrate config vector for virtio devices virtio-ccw: add support for 9pfs Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-03s390x/kvm: always ignore empty vcpu interrupt stateSascha Silbe
kvm_s390_vcpu_interrupt_pre_save() and kvm_s390_vcpu_interrupt_post_load() are essentially no-ops on hosts without KVM_CAP_S390_IRQ_STATE. Move the capability check after the check for saved IRQ state in kvm_s390_vcpu_interrupt_post_load() so that migration between hosts without KVM_CAP_S390_IRQ_STATE (including save / restore on the same host) continues to work. Fixes: 3cda44f7bae5 ("s390x/kvm: migrate vcpu interrupt state") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-06-02kvm: introduce kvm_arch_msi_data_to_gsiEric Auger
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI) ID. This latter equals to the SPI index + 32. to retrieve the SPI index, matching the gsi, an architecture specific function is introduced. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-27s390x: Enable vector processing capabilityEric Farman
Everything is finally in place, inform the kernel that user space supports vector registers. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Store Additional Status SIGP orderEric Farman
Add handling for the Store Additional Status at Address order that exists for the Signal Processor (SIGP) instruction. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Vector Register IOCTLsEric Farman
Handle the actual syncing of the vector registers with kernel space, via the get/put register IOCTLs. The vector registers that were introduced with the z13 overlay the existing floating point registers. FP registers 0-15 are the high-halves of vector registers 0-15. Thus, remove the freg fields and replace them with the equivalent vector field to avoid errors in duplication. Moreover, synchronize either the vector registers via kvm_sync_regs, or floating point registers via the GET/SET FPU IOCTLs. Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-27s390x: Common access to floating point registersEric Farman
Provide a routine to access the correct floating point register, to simplify future expansion. Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Eric Farman <farman@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-11Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
- build bugfix from Fam and new configure check from Emilio - two improvements to "info mtere" from Gerd - KVM support for memory transaction attributes - one more small step towards unlocked MMIO dispatch - one piece of the qemu-nbd errno fixes - trivial-ish patches from Denis and Thomas # gpg: Signature made Fri May 8 13:47:29 2015 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: qemu-nbd: only send a limited number of errno codes on the wire rules.mak: Force CFLAGS for all objects in DSO configure: require __thread support exec: move rcu_read_lock/unlock to address_space_translate callers kvm: add support for memory transaction attributes mtree: also print disabled regions mtree: tag & indent a bit better apic_common: improve readability of apic_reset_common kvm: Silence warning from valgrind Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-08s390x/kvm: migrate vcpu interrupt stateJens Freimann
This patch adds support to migrate vcpu interrupts. We use ioctl KVM_S390_GET_IRQ_STATE and _SET_IRQ_STATE to get/set the complete interrupt state for a vcpu. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-05-08s390x/kvm: use ioctl KVM_S390_IRQ for vcpu interruptsJens Freimann
KVM_S390_INT uses only two parameter fields. This is not enough to pass all required information for certain interrupts. A new ioctl KVM_S390_IRQ is available which allows us to inject all local interrupts as defined in the Principles of Operation. It takes a struct kvm_s390_irq as a parameter which can store interrupt payload data for all interrupts. Let's use the new ioctl for injecting vcpu interrupts. Tested-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30kvm: add support for memory transaction attributesPaolo Bonzini
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs. These are then passed to address_space_rw. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-30s390x/kvm: Support access register mode for KVM_S390_MEM_OP ioctlAlexander Yarygin
Access register mode is one of the modes that control dynamic address translation. In this mode the address space is specified by values of the access registers. The effective address-space-control element is obtained from the result of the access register translation. See the "Access-Register Introduction" section of the chapter 5 "Program Execution" in "Principles of Operations" for more details. When the CPU is in AR mode, the s390_cpu_virt_mem_rw() function must know which access register number to use for address translation. This patch does several things: - add new parameter 'uint8_t ar' to that function - decode ar number from intercepted instructions - pass the ar number to s390_cpu_virt_mem_rw(), which in turn passes it to the KVM_S390_MEM_OP ioctl. Signed-off-by: Alexander Yarygin <yarygin@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30s390x/mmu: Use ioctl for reading and writing from/to guest memoryThomas Huth
Add code to make use of the new ioctl for reading from / writing to virtual guest memory. By using the ioctl, the memory accesses are now protected with the so-called ipte-lock in the kernel. [CH: moved error message into kvm_s390_mem_op()] Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-04-30s390x/kvm: Put vm name, extended name and UUID into STSI322 SYSIBEkaterina Tumanova
KVM prefills the SYSIB, returned by STSI 3.2.2. This patch allows userspace to intercept execution, and fill in the values, that are known to qemu: machine name (8 chars), extended machine name (256 chars), extended machine name encoding (equals 2 for UTF-8) and UUID. STSI322 qemu handler also finds a highest virtualization level in level-3 virtualization stack that doesn't support Extended Names (Ext Name delimiter) and propagates zero Ext Name to all levels below, because this level is not capable of managing Extended Names of lower levels. Signed-off-by: Ekaterina Tumanova <tumanova@linux.vnet.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16s390x: CPACF: Handle key wrap machine optionsTony Krowiak
Check for the aes_key_wrap and dea_key_wrap machine options and set the appropriate KVM device attribute(s) to tell the kernel to enable or disable the AES/DEA protected key functions for the guest domain. This patch introduces two new machine options for indicating the state of AES/DEA key wrapping functions. This controls whether the guest will have access to the AES/DEA crypto functions. aes_key_wrap="on | off" is changed to aes-key-wrap="on | off" dea_key_wrap="on | off" is changed to dea-key-wrap="on | off" Check for the aes-key-wrap and dea-key-wrap machine options and set the appropriate KVM device attribute(s) to tell the kernel to enable or disable the AES/DEA protected key functions for the guest domain. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Tony Krowiak <akrowiak@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1426164834-38648-4-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16s390x/kvm: make use of generic vm attribute checkDominik Dingel
By using the new introduced generic interface we can remove redundancies and clean up. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Suggested-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1426164834-38648-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-16s390x/kvm: Guest Migration TOD clock synchronizationJason J. Herne
Synchronizes the guest TOD clock across a migration by sending the guest TOD clock value to the destination system. If the guest TOD clock is not preserved across a migration then the guest's view of time will snap backwards if the destination host clock is behind the source host clock. This will cause the guest to hang immediately upon resuming on the destination system. Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1425912968-54387-1-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-03-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
misc fixes and cleanups A bunch of fixes all over the place, some of the bugs fixed are actually regressions. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (25 commits) virtio-scsi: remove empty wrapper for cmd virtio-scsi: clean out duplicate cdb field virtio-scsi: fix cdb/sense size uapi/virtio_scsi: allow overriding CDB/SENSE size virtio-scsi: drop duplicate CDB/SENSE SIZE exec: don't include hw/boards for linux-user acpi: specify format for build_append_namestring MAINTAINERS: drop aliguori@amazon.com tpm: Move memory subregion function into realize function virtio-pci: Convert to realize() pci: Convert pci_nic_init() to Error to avoid qdev_init() machine: query mem-merge machine property machine: query dump-guest-core machine property hw/boards: make it safe to include for linux-user machine: query phandle-start machine property machine: query kvm-shadow-mem machine property kvm: add machine state to kvm_arch_init machine: query kernel-irqchip property machine: allowed/required kernel-irqchip support machine: replace qemu opts with iommu property ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11kvm: add machine state to kvm_arch_initMarcel Apfelbaum
Needed to query machine's properties. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20150310' into ↵Peter Maydell
staging s390x/kvm: Features and fixes for 2.3 - an extension to the elf loader to allow relocations - make the ccw bios relocatable. This allows for bigger ramdisks or smaller guests - Handle all slow SIGPs in QEMU (instead of kernel) for better compliance and correctness - tell the KVM module the maximum guest size. This allows KVM to reduce the number or page table levels - Several fixes/cleanups # gpg: Signature made Wed Mar 11 10:17:13 2015 GMT using RSA key ID B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" * remotes/borntraeger/tags/s390x-20150310: s390-ccw: rebuild BIOS s390/bios: Make the s390-ccw.img relocatable elf-loader: Provide the possibility to relocate s390 ELF files s390-ccw.img: Reinitialize guessing on reboot s390-ccw.img: Allow bigger ramdisk sizes or offsets s390x/kvm: passing max memory size to accelerator virtio-ccw: Convert to realize() virtio-s390: Convert to realize() virtio-s390: s390_virtio_device_init() can't fail, simplify s390x/kvm: enable the new SIGP handling in user space s390x/kvm: deliver SIGP RESTART directly if stopped s390x: add function to deliver restart irqs s390x/kvm: SIGP START is only applicable when STOPPED s390x/kvm: implement handling of new SIGP orders s390x/kvm: trace all SIGP orders s390x/kvm: helper to set the SIGP status in SigpInfo s390x/kvm: pass the SIGP instruction parameter to the SIGP handler s390x/kvm: more details for SIGP handler with one destination vcpu s390x: introduce defines for SIGP condition codes synchronize Linux headers to 4.0-rc3 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-10s390x/kvm: passing max memory size to acceleratorDominik Dingel
With "KVM: s390: Allow userspace to limit guest memory size" KVM is able to do some optimizations based on the guest memory limit. The guest memory limit is computed by the initial definition and with the notion of hotplugged memory. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Guenther Hutzl <hutzl@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Dominik Dingel <dingel@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Message-Id: <1425570981-40609-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: enable the new SIGP handling in user spaceDavid Hildenbrand
All required SIGP handlers have been implemented in QEMU. Let's enable the new sigp handling in user space if the kernel supports it. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-11-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: deliver SIGP RESTART directly if stoppedDavid Hildenbrand
According to the PoP, a restart irq has to be delivered "without first honoring any other pending interruptions", if a cpu is in the STOPPED state. While it is hard to implement this case in kvm, it can easily be handled in qemu. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-10-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: SIGP START is only applicable when STOPPEDDavid Hildenbrand
In preparation for other CPU states, SIGP START will only start a VCPU if it is in the STOPPED state. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-8-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: implement handling of new SIGP ordersDavid Hildenbrand
This patch adds handling code for the following SIGP orders: - SIGP SET ARCHITECTURE - SIGP SET PREFIX - SIGP STOP - SIGP STOP AND STORE STATUS - SIGP STORE STATUS AT ADDRESS SIGP STOP (AND STORE STATUS) are the only orders that can stay pending forever (and may only be interrupted by resets), so special care has to be taken about them. Their status also has to be tracked within QEMU. This patch takes care of migrating this status (e.g. if migration happens during a SIGP STOP). Due to the BQL, only one VCPU is currently able to execute SIGP handlers at a time. According to the PoP, BUSY should be returned if another SIGP order is currently being executed on a VCPU. This can only be implemented when the BQL does not protect all handlers. For now, all SIGP orders on all VCPUs will be serialized, which will be okay for the first shot. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-7-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: trace all SIGP ordersDavid Hildenbrand
This patch adds tracing code for all SIGP orders (including the destination vcpu and the resulting condition code). Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-6-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: helper to set the SIGP status in SigpInfoDavid Hildenbrand
Whenever we set the SIGP status in the status register, we have to wipe out the lower 4 bytes and keep the higher 4 bytes. Also the condition code will always be set to STATUS_STORED. Let's introduce the wrapper for SigpInfo, as this will avoid most duplicate code in the future. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-5-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: pass the SIGP instruction parameter to the SIGP handlerDavid Hildenbrand
The parameter of the SIGP instruction will be neded in the future. Let's read it out and store it in the struct sigp_info, so it can be passed to the sigp handlers. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-4-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x/kvm: more details for SIGP handler with one destination vcpuDavid Hildenbrand
Whenever a sigp order is to be executed by a target vcpu, we use run_on_cpu(). As we have only one pointer to pass all data to these sigp handlers, let's introduce the struct sigp_info and use it as a transport container. All orders targeting a single vcpu are now dispatched from a separate handler. The destination vcpu is only valid for these orders and must not be checked for SIGP SET ARCHITECTURE. The sigp_info is filled with life in this new handler and used to pass the information about the sigp order to the existing handlers. The cc is set within these handlers. Rename sigp_cpu_start() and sigp_cpu_restart() on the way to match the SIGP order names (in order to avoid touching affected lines several times). Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-3-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10s390x: introduce defines for SIGP condition codesDavid Hildenbrand
This patch introduces defines for the SIGP condition codes and replaces all occurrences of numeral condition codes with the new defines. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <1424783731-43426-2-git-send-email-jfrei@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-03-10Remove superfluous '\n' around error_report()Gonglei
Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-18s390x/ioinst: Set condition code in ioinst_handle_tsch() handlerThomas Huth
Move the setting of the condition code from kvm.c into the handler function in ioinst.c itself, just like it has been done with the other handlers already (TSCH has just not been changed yet since it is called from a different dispatcher in kvm.c). Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-18s390x/kvm: Add function for injecting pgm access exceptionsThomas Huth
Program access exceptions are defined to deliver a translation exception code in the low-core. Add a function trigger_access_exception() that generates the proper program interrupt on both KVM and non-KVM systems and switch the existing code to use it. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-13s390x/ipl: drop reipl parameters on resetsFan Zhang
Whenever a reboot initiated by the guest is done, the reipl parameters should remain valid. The disk configured by the guest is to be used for ipl'ing. External reboot/reset request (e.g. via virsh reset guest) should completely reset the guest to the initial state, and therefore also reset the reipl parameters, resulting in an ipl behaviour of the initially configured guest. This could be an external kernel or a disk. Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Signed-off-by: Fan Zhang <zhangfan@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2015-02-03s390x/kvm: unknown DIAGNOSE code should give a specification exceptionChristian Borntraeger
As described in CP programming services an unimplemented DIAGNOSE function should return a specification exception. Today we give the guest an operation exception. As both exception types are suppressing and Linux as a guest does not care about the type of program check in its exception table handler as long as both types have the same kind of error handling (nullifying, terminating, suppressing etc.) this was unnoticed. Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-02-03s390x/kvm: Fix diag-308 register decodingThomas Huth
Fix the decoding of the r1 register number in the diagnose 308 handler. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12kvm: extend kvm_irqchip_add_msi_route to work on s390Frank Blaschka
on s390 MSI-X irqs are presented as thin or adapter interrupts for this we have to reorganize the routing entry to contain valid information for the adapter interrupt code on s390. To minimize impact on existing code we introduce an architecture function to fixup the routing entry. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12s390: implement pci instructionsFrank Blaschka
This patch implements the s390 pci instructions in qemu. It allows to access and drive pci devices attached to the s390 pci bus. Because of platform constrains devices using IO BARs are not supported. Also a device has to support MSI/MSI-X to run on s390. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12s390x/kvm: avoid syscalls by syncing registers with kvm_runDavid Hildenbrand
We can avoid loads of syscalls when dropping to user space by storing the values of more registers directly within kvm_run. Support is added for: - ARCH0: CPU timer, clock comparator, TOD programmable register, guest breaking-event register, program parameter - PFAULT: pfault parameters (token, select, compare) Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-12s390x/kvm: sync register support helper functionDavid Hildenbrand
Let's unify the code to sync registers by moving the checks into a helper function can_sync_regs(). Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-12-15Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
- Migration and linuxboot fixes for 2.2 regressions - valgrind/KVM support - small i386 patches - PCI SD host controller support - malloc/free cleanups from Markus (x86/scsi) - IvyBridge model - XSAVES support for KVM - initial patches from record/replay # gpg: Signature made Mon 15 Dec 2014 16:35:08 GMT using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) sdhci: Support SDHCI devices on PCI sdhci: Define SDHCI PCI ids sdhci: Add "sysbus" to sdhci QOM types and methods sdhci: Remove class "virtual" methods sdhci: Set a default frequency clock serial: only resample THR interrupt on rising edge of IER.THRI serial: update LSR on enabling/disabling FIFOs serial: clean up THRE/TEMT handling serial: reset thri_pending on IER writes with THRI=0 linuxboot: fix loading old kernels kvm/apic: fix 2.2->2.1 migration target-i386: add Ivy Bridge CPU model target-i386: add f16c and rdrand to Haswell and Broadwell target-i386: add VME to all CPUs pc: add 2.3 machine types i386: do not cross the pages boundaries in replay mode cpus: make icount warp behave well with respect to stop/cont timer: introduce new QEMU_CLOCK_VIRTUAL_RT clock cpu-exec: invalidate nocache translation if they are interrupted icount: introduce cpu_get_icount_raw ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-15valgrind/s390x: avoid false positives on KVM_SET_FPU ioctlChristian Borntraeger
struct kvm_fpu contains an alignment padding on s390x. Let's use a designated initializer to avoid false positives from valgrind/memcheck. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-15KVM_CAP_IRQFD and KVM_CAP_IRQFD_RESAMPLE checksEric Auger
Compute kvm_irqfds_allowed by checking the KVM_CAP_IRQFD extension. Remove direct settings in architecture specific files. Add a new kvm_resamplefds_allowed variable, initialized by checking the KVM_CAP_IRQFD_RESAMPLE extension. Add a corresponding kvm_resamplefds_enabled() function. A special notice for s390 where KVM_CAP_IRQFD was not immediatly advirtised when irqfd capability was introduced in the kernel. KVM_CAP_IRQ_ROUTING was advertised instead. This was fixed in "KVM: s390: announce irqfd capability", ebc3226202d5956a5963185222982d435378b899 whereas irqfd support was brought in 84223598778ba08041f4297fda485df83414d57e, "KVM: s390: irq routing for adapter interrupts". Both commits first appear in 3.15 so there should not be any kernel version impacted by this QEMU modification. Signed-off-by: Eric Auger <eric.auger@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-26s390x/kvm: Fix compile errorChristian Borntraeger
commit a2b257d6212a "memory: expose alignment used for allocating RAM as MemoryRegion API" triggered a compile error on KVM/s390x. Fix the prototype and the implementation of legacy_s390_alloc. Cc: Igor Mammedov <imammedo@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-11-23memory: expose alignment used for allocating RAM as MemoryRegion APIIgor Mammedov
introduce memory_region_get_alignment() that returns underlying memory block alignment or 0 if it's not relevant/implemented for backend. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-11-05s390x/kvm: Fix warning from sparseThomas Huth
When running "sparse" with the s390x kvm.c code, it complains that "constant 0x00400f1d40330000 is so big it is long" - let's fix this by appending a proper suffix. Signed-off-by: Thomas Huth <thuth@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-11-05s390x/kvm: Fix opcode decoding for eb instruction handlerFrank Blaschka
The second byte of the opcode is encoded in the lowest byte of the ipb field, not the lowest byte of the ipa field. Signed-off-by: Frank Blaschka <blaschka@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
2014-10-10s390x/kvm: synchronize the cpu state after SIGP (INITIAL) CPU RESETDavid Hildenbrand
We need to synchronize registers after a reset has been performed. The current code does that in qemu_system_reset(), load_normal_reset() and modified_clear_reset() for all vcpus. After SIGP (INITIAL) CPU RESET, this needs to be done for the targeted vcpu as well, so let's call cpu_synchronize_post_reset() in the respective handlers. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2014-10-10s390x/kvm: reuse kvm_s390_reset_vcpu() to get rid of ifdefsDavid Hildenbrand
This patch reuses kvm_s390_reset_vcpu() to get rid of some CONFIG_KVM and CONFIG_USER_ONLY ifdefs in cpu.c. In order to get rid of CONFIG_USER_ONLY, kvm_s390_reset_vcpu() has to provide a dummy implementation - the two definitions are moved to the proper section in cpu.h. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Jens Freimann <jfrei@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> CC: Andreas Faerber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 09:16:17 +0000