aboutsummaryrefslogtreecommitdiff
path: root/target-ppc
AgeCommit message (Collapse)Author
2015-07-01kvm: First step to push iothread lock out of inner run loopJan Kiszka
This opens the path to get rid of the iothread lock on vmexits in KVM mode. On x86, the in-kernel irqchips has to be used because we otherwise need to synchronize APIC and other per-cpu state accesses that could be changed concurrently. Regarding pre/post-run callbacks, s390x and ARM should be fine without specific locking as the callbacks are empty. MIPS and POWER require locking for the pre-run callback. For the handle_exit callback, it is non-empty in x86, POWER and s390. Some POWER cases could do without the locking, but it is left in place for now. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1434646046-27150-7-git-send-email-pbonzini@redhat.com>
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-04Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell
into staging Patch queue for ppc - 2015-06-03 Highlights this time around: - sPAPR: endian fixes, speedups, bug fixes, hotplug basics - add default ram size capability for machines (sPAPR defaults to 512MB now) # gpg: Signature made Wed Jun 3 22:59:09 2015 BST using RSA key ID 03FEDC60 # gpg: Good signature from "Alexander Graf <agraf@suse.de>" # gpg: aka "Alexander Graf <alex@csgraf.de>" * remotes/agraf/tags/signed-ppc-for-upstream: (40 commits) softmmu: support up to 12 MMU modes tcg: add TCG_TARGET_TLB_DISPLACEMENT_BITS tci: do not use CPUArchState in tcg-target.h Add David Gibson for sPAPR in MAINTAINERS file pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementations spapr: override default ram size to 512MB machine: add default_ram_size to machine class spapr_pci: emit hotplug add/remove events during hotplug spapr_pci: enable basic hotplug operations pci: make pci_bar useable outside pci.c spapr_pci: create DRConnectors for each PCI slot during PHB realize spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge spapr_drc: add spapr_drc_populate_dt() spapr_events: event-scan RTAS interface spapr_events: re-use EPOW event infrastructure for hotplug events spapr_rtas: add ibm, configure-connector RTAS interface spapr: add rtas_st_buffer_direct() helper spapr_rtas: add get-sensor-state RTAS interface spapr_rtas: add set-indicator RTAS interface spapr_rtas: add get/set-power-level RTAS interfaces ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-03pseries: Enable in-kernel H_LOGICAL_CI_{LOAD, STORE} implementationsDavid Gibson
qemu currently implements the hypercalls H_LOGICAL_CI_LOAD and H_LOGICAL_CI_STORE as PAPR extensions. These are used by the SLOF firmware for IO, because performing cache inhibited MMIO accesses with the MMU off (real mode) is very awkward on POWER. This approach breaks when SLOF needs to access IO devices implemented within KVM instead of in qemu. The simplest example would be virtio-blk using an iothread, because the iothread / dataplane mechanism relies on an in-kernel implementation of the virtio queue notification MMIO. To fix this, an in-kernel implementation of these hypercalls has been made, (kernel commit 99342cf "kvmppc: Implement H_LOGICAL_CI_{LOAD,STORE} in KVM" however, the hypercalls still need to be enabled from qemu. This performs the necessary calls to do so. It would be nice to provide some warning if we encounter a problematic device with a kernel which doesn't support the new calls. Unfortunately, I can't see a way to detect this case which won't either warn in far too many cases that will probably work, or which is horribly invasive. Signed-off-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-06-02kvm: introduce kvm_arch_msi_data_to_gsiEric Auger
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI) ID. This latter equals to the SPI index + 32. to retrieve the SPI index, matching the gsi, an architecture specific function is introduced. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-30kvm: add support for memory transaction attributesPaolo Bonzini
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs. These are then passed to address_space_rw. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-04-28Convert (ffs(val) - 1) to ctz32(val)Stefan Hajnoczi
This commit was generated mechanically by coccinelle from the following semantic patch: @@ expression val; @@ - (ffs(val) - 1) + ctz32(val) The call sites have been audited to ensure the ffs(0) - 1 == -1 case never occurs (due to input validation, asserts, etc). Therefore we don't need to worry about the fact that ctz32(0) == 32. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 1427124571-28598-5-git-send-email-stefanha@redhat.com Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-04-17target-ppc: don't invalidate msr MSR_HVB bit in cpu_post_loadMark Cave-Ayland
The invalidation code introduced in commit 2360b works by inverting most bits of env->msr to ensure that hreg_store_msr() will forcibly update the CPU env state to reflect the new msr value post-migration. Unfortunately hreg_store_msr() is called with alter_hv set to 0 which preserves the MSR_HVB state from the CPU env which is now the opposite value to what it should be. Ensure that we don't invalidate the msr MSR_HVB bit during cpu_post_load so that the correct value is restored. This fixes suspend/resume for PPC64. Reported-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Alexander Graf <agraf@suse.de> Message-id: 1429255009-12751-1-git-send-email-mark.cave-ayland@ilande.co.uk Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-25target-ppc: Remove POWER5+ v0.0 that never existedAlexey Kardashevskiy
IBM uses low 16bits to specify the chip version of a POWER CPU. So there has never been an actual silicon with PVR = 0x003B0000. The first silicon would have PVR 0x003B0100 but it is very unlikely to find it in any machine shipped to any customer as it was too raw. This removes CPU_POWERPC_POWER5P_v00 definition and changes POWER5+ and POWERgs aliases (which are synonyms) to point to POWER5+_v2.1 which can still be found in real machines. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Andreas Färber <afaerber@suse.de> [agraf: fix commit message] Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
misc fixes and cleanups A bunch of fixes all over the place, some of the bugs fixed are actually regressions. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (25 commits) virtio-scsi: remove empty wrapper for cmd virtio-scsi: clean out duplicate cdb field virtio-scsi: fix cdb/sense size uapi/virtio_scsi: allow overriding CDB/SENSE size virtio-scsi: drop duplicate CDB/SENSE SIZE exec: don't include hw/boards for linux-user acpi: specify format for build_append_namestring MAINTAINERS: drop aliguori@amazon.com tpm: Move memory subregion function into realize function virtio-pci: Convert to realize() pci: Convert pci_nic_init() to Error to avoid qdev_init() machine: query mem-merge machine property machine: query dump-guest-core machine property hw/boards: make it safe to include for linux-user machine: query phandle-start machine property machine: query kvm-shadow-mem machine property kvm: add machine state to kvm_arch_init machine: query kernel-irqchip property machine: allowed/required kernel-irqchip support machine: replace qemu opts with iommu property ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11kvm: add machine state to kvm_arch_initMarcel Apfelbaum
Needed to query machine's properties. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-10cpu: Make cpu_init() return QOM CPUState objectEduardo Habkost
Instead of making cpu_init() return CPUArchState, return CPUState. Changes were made using the Coccinelle semantic patch below. @@ typedef CPUState; identifier e; expression args; type CPUArchState; @@ - e = + cpu = cpu_init(args); - if (!e) { + if (!cpu) { ... } - cpu = ENV_GET_CPU(env); + e = cpu->env_ptr; @@ identifier new_env, new_cpu, env, cpu; type CPUArchState; expression args; @@ -{ - CPUState *cpu = ENV_GET_CPU(env); - CPUArchState *new_env = cpu_init(args); - CPUState *new_cpu = ENV_GET_CPU(new_env); +{ + CPUState *cpu = ENV_GET_CPU(env); + CPUState *new_cpu = cpu_init(args); + CPUArchState *new_env = new_cpu->env_ptr; ... } @@ identifier c, cpu_init_func, cpu_model; type StateType, CPUType; @@ -static inline StateType* cpu_init(const char *cpu_model) -{ - CPUType *c = cpu_init_func(cpu_model); ( - if (c == NULL) { - return NULL; - } - return &c->env; | - if (c) { - return &c->env; - } - return NULL; ) -} +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model)) @@ identifier cpu_init_func; identifier model; @@ -#define cpu_init(model) (&cpu_init_func(model)->env) +#define cpu_init(model) CPU(cpu_init_func(model)) Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Max Filippov <jcmvbkbc@gmail.com> [AF: Fixed up cpu_copy() manually] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-03-09target-ppc: Fix warnings from SparseStefan Weil
Sparse report: target-ppc/mmu-hash64.c:353:9: warning: returning void-valued expression target-ppc/mmu-hash64.c:620:9: warning: returning void-valued expression Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09target-ppc: Add versions to server CPU descriptionsAlexey Kardashevskiy
5b79b1c "target-ppc: Create versionless CPU class per family if KVM" added a dynamic CPU class registration with the name of the CPU family which QEMU is running on. For example, this allowed specifying "-cpu POWER7" on every version of POWER7 machine, not just the one which POWER7 was an alias of. I.e. before 5b79b1c, "-cpu POWER7" would not work on real POWER7 2.1 and would work on POWER7 2.3 only. The same story for POWER8. However that patch broke POWER5+ support as POWER5+ CPU uses the same name as the CPU class so dynamic registering of the POWER5+ class failed. This redefines POWER5+ server CPUs by adding a version to them and adding an alias for TCG case. KVM will use dynamically registered CPUs. While we are here, do the same for 970 CPU. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09PPC: Introduce the Virtual Time Base (VTB) SPR registerCyril Bur
This patch adds basic support for the VTB. PowerISA: The Virtual Time Base (VTB) is a 64-bit incrementing counter. Virtual Time Base increments at the same rate as the Time Base until its value becomes 0xFFFF_FFFF_FFFF_FFFF (2 64 - 1); at the next increment its value becomes 0x0000_0000_0000_0000. There is no interrupt or other indication when this occurs. The operation of the Virtual Time Base has the following additional properties. 1. Loading a GPR from the Virtual Time Base has no effect on the accuracy of the Virtual Time Base. 2. Copying the contents of a GPR to the Virtual Time Base replaces the contents of the Virtual Time Base with the contents of the GPR. Signed-off-by: Cyril Bur <cyril.bur@au1.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09target-ppc: force update of msr bits in cpu_post_loadMark Cave-Ayland
Since env->msr has already been restored by the time cpu_post_load is called, make sure that ppc_store_msr() is explicitly called with all msr bits except MSR_TGPR marked as invalid. This solves the issue where MSR flags aren't set correctly when restoring a VM snapshot, in particular the internal env->excp_prefix value when MSR_EP has been altered by a guest. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09target-ppc: move sdr1 value change detection logic to helper_store_sdr1()Mark Cave-Ayland
Otherwise when cpu_post_load calls ppc_store_sdr1() when restoring a VM snapshot the value is deemed unchanged and so the internal env->htab* variables aren't set correctly. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09display cpu id dump stateTristan Gingold
Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-03-09target-ppc: Use right page size with hash table lookupAneesh Kumar K.V
We look at two sizes specified in ISA (4K, 64K). If not found matching, we consider it 16MB. Without this patch we would fail to lookup address above 16MB range. Below 16MB happened to work before because the kernel have a liner mapping and we always looked up hash for 0xc000000000000000. The actual real address was computed by using the 16MB offset with the real address found with the above hash. Without Fix: (gdb) x/16x 0xc000000001000000 0xc000000001000000 <list_entries+453208>: Cannot access memory at address 0xc000000001000000 (gdb) With Fix: (gdb) x/16x 0xc000000001000000 0xc000000001000000 <list_entries+453208>: 0x00000000 0x00000000 0x00000000 0x00000000 0xc000000001000010 <list_entries+453224>: 0x00000000 0x00000000 0x00000000 0x00000000 0xc000000001000020 <list_entries+453240>: 0x00000000 0x00000000 0x00000000 0x00000000 0xc000000001000030 <list_entries+453256>: 0x00000000 0x00000000 0x00000000 0x00000000 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-02-12tcg: Introduce tcg_op_buf_count and tcg_op_buf_fullRichard Henderson
The method by which we count the number of ops emitted is going to change. Abstract that away into some inlines. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Move emit of INDEX_op_end into gen_tb_endRichard Henderson
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-01-20exec.c: Drop TARGET_HAS_ICE define and checksPeter Maydell
The TARGET_HAS_ICE #define is intended to indicate whether a target-* guest CPU implementation supports the breakpoint handling. However, all our guest CPUs have that support (the only two which do not define TARGET_HAS_ICE are unicore32 and openrisc, and in both those cases the bp support is present and the lack of the #define is just a bug). So remove the #define entirely: all new guest CPU support should include breakpoint handling as part of the basic implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
2015-01-12kvm: extend kvm_irqchip_add_msi_route to work on s390Frank Blaschka
on s390 MSI-X irqs are presented as thin or adapter interrupts for this we have to reorganize the routing entry to contain valid information for the adapter interrupt code on s390. To minimize impact on existing code we introduce an architecture function to fixup the routing entry. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-10Merge remote-tracking branch 'remotes/agraf/tags/signed-ppc-for-upstream' ↵Peter Maydell
into staging Patch queue for ppc - 2015-01-07 New year's release. This time's highlights: - E500: More RAM support - pseries: New SLOF release - Migration fixes - Simplify USB spawning logic, removes support for explicit usb=off - TCG: Simple untansactional TM emulation # gpg: Signature made Wed 07 Jan 2015 15:19:37 GMT using RSA key ID 03FEDC60 # gpg: Good signature from "Alexander Graf <agraf@suse.de>" # gpg: aka "Alexander Graf <alex@csgraf.de>" * remotes/agraf/tags/signed-ppc-for-upstream: (37 commits) hw/ppc/mac_newworld: simplify usb controller creation logic hw/ppc/spapr: simplify usb controller creation logic hw/ppc/mac_newworld: QOMified mac99 machines hw/usb: simplified usb_enabled hw/machine: added machine_usb wrapper hw/ppc: modified the condition for usb controllers to be created for some ppc machines target-ppc: Cast ssize_t to size_t before printing with %zx target-ppc: Mark SR() and gen_sync_exception() as !CONFIG_USER_ONLY PPC: e500: Fix GPIO controller interrupt number target-ppc: Introduce Privileged TM Noops target-ppc: Introduce tcheck target-ppc: Introduce TM Noops target-ppc: Introduce tbegin target-ppc: Introduce TEXASRU Bit Fields target-ppc: Power8 Supports Transactional Memory target-ppc: Introduce tm_enabled Bit to CPU State target-ppc: Introduce Feature Flag for Transactional Memory target-ppc: Introduce Instruction Type for Transactional Memory pseries: Update SLOF firmware image to 20141202 PPC: Fix crash on spapr_tce_table_finalize() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-01-07target-ppc: Mark SR() and gen_sync_exception() as !CONFIG_USER_ONLYPeter Maydell
The functions SR() and gen_sync_exception() are only used in softmmu configs; wrap them in #ifndef CONFIG_USER_ONLY to suppress clang warnings on the linux-user builds. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce Privileged TM NoopsTom Musta
Add the supervisory Transactional Memory instructions treclaim. and trechkpt. The implementation is a degenerate one that simply checks privileged state, TM availability and then sets CR[0] to 0b0000, just like the unprivileged noops. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce tcheckTom Musta
Add a degenerate implementation of the Transaction Check (tcheck) instruction. Since transaction always immediately fail, this implementation simply sets CR[BF] to 0b1000, i.e. TDOOMED = 1 and MSR[TS] == 0. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce TM NoopsTom Musta
Add degenerate implementations of the non-privileged Transactional Memory instructions tend., tabort*. and tsr. This implementation simply checks the MSR[TM] bit and then sets CR0 to 0b0000. This is a reasonable degenerate implementation since transactions are never allowed to begin and hence MSR[TS] is always 0b00. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce tbeginTom Musta
Provide a degenerate implementation of the tbegin instruction. This implementation always fails the transaction, recording the failure per Book II Section 5.3.2 of the Power ISA V2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce TEXASRU Bit FieldsTom Musta
Define mnemonics for the various bit fields in the Transaction EXception And Summary Register (TEXASR). Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Power8 Supports Transactional MemoryTom Musta
The Power8 processor implements the Transactional Memory Facility as defined in Power ISA 2.07. Update the initialization code to indicate this. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce tm_enabled Bit to CPU StateTom Musta
Add a bit (tm_enabled) to CPU state that mirrors the MSR[TM] bit. This is analogous to the other "available" bits in the MSR (FP, VSX, etc.). NOTE: Since MSR[TM] occupies big-endian bit 31, the code is wrapped with a PPC64 bit check. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce Feature Flag for Transactional MemoryTom Musta
Add a flag (POWERPC_FLAG_TM) for the Transactional Memory Facility introduced in Power ISA 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Introduce Instruction Type for Transactional MemoryTom Musta
Add a category (PPC2_TM) for the Transactional Memory instructions introduced in Power ISA 2.07. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: explicitly save page table headers in big endianCédric Le Goater
Currently, when the page tables are saved, the kvm_get_htab_header structs and the ptes are assumed being big endian and dumped as a indistinct blob in the statefile. This is no longer true when the host is little endian and this breaks restoration. This patch unfolds the kvmppc_save_htab routine to write explicitly the kvm_get_htab_header structs in big endian. The ptes are left untouched. Signed-off-by: Cédric Le Goater <clg@fr.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Eliminate set_fprf Argument From helper_compute_fprfTom Musta
The set_fprf argument to the helper_compute_fprf helper function is no longer necessary -- the helper is only invoked when FPSCR[FPRF] is going to be set. Eliminate the unnecessary argument from the function signature and its corresponding implementation. Change the return value of the helper to "void". Update the name of the local variable "ret" to "fprf", which now makes more sense. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Eliminate set_fprf Argument From gen_compute_fprfTom Musta
The set_fprf argument to the gen_compute_fprf() utility is no longer needed -- gen_compute_fprf() is now called only when FPRF is actually computed and set. Eliminate the obsolete argument. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Fully Migrate to gen_set_cr1_from_fpscrTom Musta
Eliminate the set_rc argument from the gen_compute_fprf utility and the corresponding (and incorrect) implementation. Replace it with calls to the gen_set_cr1_from_fpscr() utility. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: mffs. Should Set CR1 from FPSCR BitsTom Musta
Update the Move From FPSCR (mffs.) instruction to correctly set CR[1] from FPSCR[FX,FEX,VX,OX]. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Fix Floating Point Move Instructions That Set CR1Tom Musta
The Floating Point Move instructions (fmr., fabs., fnabs., fneg., and fcpsgn.) incorrectly copy FPSCR[FPCC] instead of [FX,FEX,VX,OX]. Furthermore, the current code does this via a call to gen_compute_fprf, which is awkward since these instructions do not actually set FPRF. Change the code to use the gen_set_cr1_from_fpscr utility. Signed-off-by: Tom Musta <tommusta@gmail.com> [agraf: whitespace fixes] Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: VXSQRT Should Not Be Set for NaNsTom Musta
The Power ISA square root instructions (fsqrt[s], frsqrte[s]) must set the FPSCR[VXSQRT] flag when operating on a negative value. However, NaNs have no sign and therefore this flag should not be set when operating on one. Change the order of the checks in the helper code. Move the SNaN-to-QNaN macro to the top of the file so that it can be re-used. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-07target-ppc: Load/Store Vector Element Storage AlignmentTom Musta
The Load Vector Element Indexed and Store Vector Element Indexed instructions compute an effective address in the usual manner. However, they truncate that address to the natural boundary. For example, the lvewx instruction will ignore the least significant two bits of the address and thus load the aligned word of storage. Fix the generators for these instruction to properly perform this truncation. Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2015-01-03gen-icount: check cflags instead of use_icount globalPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03translate: check cflags instead of use_icount globalPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-23target-ppc: pass DisasContext to SPR generator functionsPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-16qemu-log: add log category for MMU infoAntony Pavlov
Running barebox on qemu-system-mips* with '-d unimp' overloads stderr by very very many mips_cpu_handle_mmu_fault() messages: mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3 mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3 mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0 So it's very difficult to find LOG_UNIMP message. The mips_cpu_handle_mmu_fault() messages appear on enabling ANY logging! It's not very handy. Adding separate log category for *_cpu_handle_mmu_fault() logging fixes the problem. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-11-20target-ppc: Altivec's mtvscr Decodes Wrong RegisterTom Musta
The Move to Vector Status and Control Register (mtvscr) instruction uses VRB as the source register. Fix the code generator to correctly decode the VRB field. That is, use "rB(ctx->opcode)" instead of "rD(ctx->opcode)". Signed-off-by: Tom Musta <tommusta@gmail.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-11-20target-ppc: Fix breakpoint registers for e300Fabien Chouteau
In the previous patch, the registers were added to init_proc_G2LE instead of init_proc_e300. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Alexander Graf <agraf@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 20:00:09 +0000