aboutsummaryrefslogtreecommitdiff
path: root/target-ppc/helper_regs.h
AgeCommit message (Collapse)Author
2016-06-07ppc: Batch TLB flushes on 32-bit 6xx/7xx/7xxx in hash modeBenjamin Herrenschmidt
This ports the existing 64-bit mechanism to 32-bit, thus series of 64 tlbie's followed by a sync like some versions of Darwin (ab)use will result in a single flush. We apply a pending flush on any sync instruction though, as Darwin doesn't use tlbsync on non-SMP systems. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07ppc: Properly tag the translation cache based on MMU modeBenjamin Herrenschmidt
We used to always flush the TLB when changing relocation mode in MSR:IR and MSR:DR (ie. MMU on/off for Instructions and Data). We don't anymore since we have split mmu_idx for instruction and data. However, since we hard code the mmu_idx in the translated code, we now need to also make sure MSR:IR and MSR:DR are part of the hflags used to tag translated code, so that we use different translated code for different MMU settings. Darwin gets hurt by this problem. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-06-07ppc: Fix hreg_store_msr() so that non-HV mode cannot alter MSR:HVBenjamin Herrenschmidt
This helper is only used by the various instructions that can alter MSR and not interrupts. Add a comment to that effect to the interrupt code as well in case somebody wants to change this Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-30ppc: Do some batching of TCG tlb flushesBenjamin Herrenschmidt
On ppc64 especially, we flush the tlb on any slbie or tlbie instruction. However, those instructions often come in bursts of 3 or more (context switch will favor a series of slbie's for example to an slbia if the SLB has less than a certain number of entries in it, and tlbie's can happen in a series, with PAPR, H_BULK_REMOVE can remove up to 4 entries at a time. Doing a tlb_flush() each time is a waste of time. We end up doing a memset of the whole TLB, reloading it for the next instruction, memset'ing again, etc... Those instructions don't have to take effect immediately. For slbie, they can wait for the next context synchronizing event. For tlbie, the next tlbsync. This implements batching by keeping a flag that indicates that we have a TLB in need of flushing. We check it on interrupts, rfi's, isync's and tlbsync and flush the TLB if needed. This reduces the number of tlb_flush() on a boot to a ubuntu installer first dialog screen from roughly 360K down to 36K. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [clg: added a 'CPUPPCState *' variable in h_remove() and h_bulk_remove() ] Signed-off-by: Cédric Le Goater <clg@kaod.org> [dwg: removed spurious whitespace change, use 0/1 not true/false consistently, since tlb_need_flush has int type] Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2016-05-30ppc: Use split I/D mmu modes to avoid flushes on interruptsBenjamin Herrenschmidt
We rework the way the MMU indices are calculated, providing separate indices for I and D side based on MSR:IR and MSR:DR respectively, and thus no longer need to flush the TLB on context changes. This also adds correct support for HV as a separate address space. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2014-04-08PPC: Only enter MSR_POW when no interrupts pendingAlexander Graf
We were entering the power saving state even when interrupts (like an external interrupt or a decrementer interrupt) were still in flight. In case we find a pending interrupt, don't enter power saving state. Signed-off-by: Alexander Graf <agraf@suse.de> Reviewed-by: Tom Musta <tmusta@gmail.com>
2014-03-13cputlb: Change tlb_flush() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-12-20PPC: Add VSX to hflagsAlexander Graf
We generate different code depending on whether MSR_VSX is set or clear, so it needs to be part of our hflags too which indicate whether we're still in the same translation block cache bucket. Signed-off-by: Alexander Graf <agraf@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2009-08-16Replace always_inline with inlineBlue Swirl
We define inline as always_inline. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel32
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-21target-ppc: Convert XER accesses to TCGaurel32
Define XER bits as a single register and access them individually to avoid defining 5 32-bit registers (TCG doesn't permit to map 8-bit registers). Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5500 c046a42c-6fe2-441c-8c8c-71466251a162
2008-09-04ppc: cleanup register typesaurel32
- use target_ulong for gpr and dyngen registers - remove ppc_gpr_t type - define 64-bit dyngen registers for GPE register on 32-bit targets Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5154 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17PowerPC hypervisor mode is not fundamentally available only for PowerPC 64.j_mayer
Remove TARGET_PPC64 dependency and add code provision to be able to define a fake 32 bits CPU with hypervisor feature support. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3678 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Always make all PowerPC exception definitions visible.j_mayer
Always make the hypervisor timers available. Remove all TARGET_PPC64H checks, keeping a few if (0) tests for cases that cannot be properly handled with the current PowerPC CPU definition. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3656 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-04PowerPC 601 need specific callbacks for its BATs setup.j_mayer
Implement PowerPC 601 HID0 register, needed for little-endian mode support. As a consequence, we need to merge hflags coming from MSR with other ones. Use little-endian mode from hflags instead of MSR during code translation. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3524 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-25Implement power-management for all defined PowerPC CPUs.j_mayer
Fix PowerPC 970MP definition. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3440 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-25Gprof prooved the PowerPC emulation spent too much time in MSR load and storej_mayer
routines. Coming back to a raw MSR storage model then speed-up the emulation. Improve fast MSR updates (wrtee wrteei and mtriee cases). Share rfi family instructions helpers code to avoid bug in duplicated code. Allow entering halt mode as the result of a rfi instruction. Add a new helper_regs.h file to avoid duplication of special registers manipulation routines (currently XER and MSR). git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3436 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-22 06:55:33 +0000