| Age | Commit message (Collapse) | Author |
|---|
|
Remove the include of setjmp.h from the cpu.h of target-alpha
and target-ppc. This is unnecessary because cpu-defs.h already
includes this header; this change brings these two targets
into line with all the rest.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: move TLBs to their own arrays
PPC: 440: Use 440 style MMU as default, so Qemu knows the MMU type
PPC: E500: Use MAS registers instead of internal TLB representation
PPC: Only set lower 32bits with mtmsr
PPC: update openbios firmware
PPC: mpc8544ds: Add hypervisor node
PPC: calculate kernel,initrd,cmdline locations dynamically
target-ppc: Handle memory-forced I/O controller access
PPC: E500: Implement reboot controller
|
|
Move functions cpu_has_work() and cpu_pc_from_tb() from exec.h to cpu.h. This is
needed by later patches.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Until now, we've created a union over multiple different TLB types and
allocated that union. While it's a waste of memory (and cache) to allocate
TLB information for a TLB type with much information when you only need
little, it also inflicts another issue.
With the new KVM API, we can now share the TLB between KVM and qemu, but
for that to work we need to have both be in the same layout. We can't just
stretch it over to fit some internal different TLB representation.
Hence this patch moves all TLB types to their own array, allowing us to only
address and allocate exactly the boundaries required for the specific TLB
type at hand.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The natural format for e500 cores to do TLB manipulation with are the MAS
registers. Instead of converting them into some internal representation
and back again when the guest reads them, we can just keep the data
identical to the way the guest passed it to us.
The main advantage of this approach is that we're getting closer to being
able to share MMU data with KVM using shared memory, so that we don't need
to copy lots of MMU data back and forth all the time. For this to work
however, another patch is required that gets rid of the TLB union, as that
destroys our memory layout that needs to be identical with the kernel one.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
ulong is undefined for w32 (and maybe other) compilations.
Replace it by uintptr_t (which also fixes compilation for w64
and is a better choice for pointer to integer conversions).
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
* 'ppc-next' of git://repo.or.cz/qemu/agraf:
PPC: Qdev'ify e500 pci
PPC MPC7544DS: Use new TLB helper function
PPC: Implement e500 (FSL) MMU
PPC: Add another 64 bits to instruction feature mask
PPC: Add GS MSR definition
PPC: Make MPC8544DS emulation work w/o KVM
PPC: Make MPC8544DS obey -cpu switch
Fix off-by-one error in sizing pSeries hcall table
ppc64: Fix out-of-tree builds
kvm: ppc: warn user on PAGE_SIZE mismatch
kvm: ppc: detect old headers
monitor: add PPC BookE SPRs
kvm: ppc: fixes for KVM_SET_SREGS on init
ppc64: Don't try to build sPAPR RTAS on Darwin
Place pseries vty devices at addresses more similar to existing machines
Make pSeries 'model' property more closely resemble real hardware
pseries: Increase maximum CPUs to 256
|
|
Most of the code to support e500 style MMUs is already in place, but
we're missing on some of the special TLB0-TLB1 handling code and slightly
different TLB modification.
This patch adds support for the FSL style MMU.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
To enable quick runtime detection of instruction groups to the currently
selected CPU emulation, we have a feature mask of what exactly the respective
instruction supports.
This feature mask is 64 bits long and we just successfully exceeded those 64
bits. To add more features, we need to think of something.
The easiest solution that came to my mind was to simply add another 64 bits
that we can also match on. Since the comparison is only done on start of the
qemu process to generate an internal opcode calling table, we should be fine
on any performance penalties here.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
The BookE specification defines MSR bit 28 as Guest State. Add it
to the list of MSR macros.
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Read them via KVM_GET_SREGS in kvm_arch_get_registers(),
and display them in "info registers".
Also get CR and PID from the existing KVM_GET_REGS.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Shared-processor partitions are those where a CPU is time-sliced between
partitions, rather than being permanently dedicated to a single
partition. qemu emulated partitions, since they are just scheduled with
the qemu user process, behave mostly like shared processor partitions.
In order to better support shared processor partitions (splpar), PAPR
defines the "VPA" (Virtual Processor Area), a shared memory communication
channel between the hypervisor and partitions. There are also two
additional shared memory communication areas for specialized purposes
associated with the VPA.
A VPA is not essential for operating an splpar, though it can be necessary
for obtaining accurate performance measurements in the presence of
runtime partition switching.
Most importantly, however, the VPA is a prerequisite for PAPR's H_CEDE,
hypercall, which allows a partition OS to give up it's shared processor
timeslices to other partitions when idle.
This patch implements the VPA and H_CEDE hypercalls in qemu. We don't
implement any of the more advanced statistics which can be communicated
through the VPA. However, this is enough to make normal pSeries kernels
do an effective power-save idle on an emulated pSeries, significantly
reducing the host load of a qemu emulated pSeries running an idle guest OS.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On pSeries logical partitions, excepting the old POWER4-style full system
partitions, the guest does not have direct access to the hardware page
table. Instead, the pagetable exists in hypervisor memory, and the guest
must manipulate it with hypercalls.
However, our current pSeries emulation more closely resembles the old
style where the guest must set up and handle the pagetables itself. This
patch converts it to act like a modern partition.
This involves two things: first, the hash translation path is modified to
permit the has table to be stored externally to the emulated machine's
RAM. The pSeries machine init code configures the CPUs to use this mode.
Secondly, we emulate the PAPR hypercalls for manipulating the external
hashed page table.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
This adds emulation support for the recent POWER7 cpu to qemu. It's far
from perfect - it's missing a number of POWER7 features so far, including
any support for VSX or decimal floating point instructions. However, it's
close enough to boot a kernel with the POWER7 PVR.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Traditionally, the "segments" used for the two-stage translation used on
powerpc MMUs were 256MB in size. This was the only option on all hash
page table based 32-bit powerpc cpus, and on the earlier 64-bit hash page
table based cpus. However, newer 64-bit cpus also permit 1TB segments
This patch adds support for 1TB segment translation to the qemu code.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently the path handling hash page table translation in get_segment()
has a mix of common and 32 or 64 bit specific code. However the
division is not done terribly well which results in a lot of messy code
flipping between common and divided paths.
This patch improves the organization, consolidating several divided paths
into one. This in turn allows simplification of some code in
get_segment(), removing a number of ugly interim variables.
This new factorization will also make it easier to add support for the 1T
segments added in newer CPUs.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently, get_segment() has a variable called hash. However it doesn't
(quite) get the hash value for the ppc hashed page table. Instead it
gets the hash shifted - effectively the offset of the hash bucket within
the hash page table.
As well, as being different to the normal use of plain "hash" in the
architecture documentation, this usage necessitates some awkward 32/64
dependent masks and shifts which clutter up the path in get_segment().
This patch alters the code to use raw hash values through get_segment()
including storing raw hashes instead of pte group offsets in the ctx
structure. This cleans up the path noticeably.
This does necessitate 32/64 dependent shifts when the hash values are
taken out of the ctx structure and used, but those paths already have
32/64 bit variants so this is less awkward than it was in get_segment().
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
On ppc machines with hash table MMUs, the special purpose register SDR1
contains both the base address of the encoded size (hashed) page tables.
At present, we interpret the SDR1 value within the address translation
path. But because the encodings of the size for 32-bit and 64-bit are
different this makes for a confusing branch on the MMU type with a bunch
of curly shifts and masks in the middle of the translate path.
This patch cleans things up by moving the interpretation on SDR1 into the
helper function handling the write to the register. This leaves a simple
pre-sanitized base address and mask for the hash table in the CPUState
structure which is easier to work with in the translation path.
This makes the translation path more readable. It addresses the FIXME
comment currently in the mtsdr1 helper, by validating the SDR1 value during
interpretation. Finally it opens the way for emulating a pSeries-style
partition where the hash table used for translation is not mapped into
the guests's RAM.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
qemu already includes support for the popcntb instruction introduced
in POWER5 (although it doesn't actually allow you to choose POWER5).
However, the logic is slightly incorrect: it will generate results
truncated to 32-bits when the CPU is in 32-bit mode. This is not
normal for powerpc - generally arithmetic instructions on a 64-bit
powerpc cpu will generate full 64 bit results, it's just that only the
low 32 bits will be significant for condition codes.
This patch corrects this nit, which actually simplifies the code slightly.
In addition, this patch implements the popcntw and popcntd
instructions added in POWER7, in preparation for allowing POWER7 as an
emulated CPU.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
For a 64-bit PowerPC target, qemu correctly implements translation
through the segment lookaside buffer. Likewise it supports the
slbmte instruction which is used to load entries into the SLB.
However, it does not emulate the slbmfee and slbmfev instructions
which read SLB entries back into registers. Because these are
only occasionally used in guests (mostly for debugging) we get
away with it.
However, given the recent SLB cleanups, it becomes quite easy to
implement these, and thereby allow, amongst other things, a guest
Linux to use xmon's command to dump the SLB.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
PowerPC and POWER chips since the POWER4 and 970 have a special
hypervisor mode, and a corresponding form of the system call
instruction which traps to the hypervisor.
qemu currently has stub implementations of hypervisor mode. That
is, the outline is there to allow qemu to run a PowerPC hypervisor
under emulation. There are a number of details missing so this
won't actually work at present, but the idea is there.
What there is no provision at all, is for qemu to instead emulate
the hypervisor itself. That is to have hypercalls trap into qemu
and their result be emulated from qemu, rather than running
hypervisor code within the emulated system.
Hypervisor hardware aware KVM implementations are in the works and
it would be useful for debugging and development to also allow
full emulation of the same para-virtualized guests as such a KVM.
Therefore, this patch adds a hook which will allow a machine to
set up emulation of hypervisor calls.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Currently the SLB information when emulating a PowerPC 970 is
storeed in a structure with the unhelpfully named fields 'tmp'
and 'tmp64'. While the layout in these fields does match the
description of the SLB in the architecture document, it is not
convenient either for looking up the SLB, or for emulating the
slbmte instruction.
This patch, therefore, reorganizes the SLB entry structure to be
divided in the the "ESID related" and "VSID related" fields as
they are divided in instructions accessing the SLB.
In addition to making the code smaller and more readable, this will
make it easier to implement for the 1TB segments used in more
recent PowerPC chips.
Signed-off-by: David Gibson <dwg@au1.ibm.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
fprintf_function uses format checking with GCC_FMT_ATTR.
Format errors were fixed in
* target-i386/helper.c
* target-mips/translate.c
* target-ppc/translate.c
Cc: Blue Swirl <blauwirbel@gmail.com>
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Only Mac-on-Linux stuff used video.x, OpenBIOS does not need it.
Remove video.x MoL hacks.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
Improve the emulation of the BookE MMU to be able to boot linux
on virtex5 boards.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Disable various target specific code that is only relevant to system emulation.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Removes a set of ifdefs from exec.c.
Introduce TARGET_VIRT_ADDR_SPACE_BITS for all targets other
than Alpha. This will be used for page_find_alloc, which is
supposed to be using virtual addresses in the first place.
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
The CRF_{CH,CL,CH_OR_CL,CH_AND_CL} constants were all off by one bit
position. Because of this, the SPE evcmp* family of instructions would
store values in the result condition register that were also off by one
bit position.
Fixed by using the CRF_{LT,GT,EQ,SO} constants for the shift amounts.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
For what I know DCR is always 32 bits wide, so we should also use uint32_t to
pass it along the stacks.
This fixes a warning when compiling qemu-system-ppc64 with KVM enabled, making
it compile without --disable-werror
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Fix the alternate time base the same way as the default timebase. SPR_ATBL
should return a 64-bit value on 64 bit implementations.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
On PPC we have a 64-bit time base. Usually (PPC32) this is accessed using
two separate 32 bit SPR accesses to SPR_TBU and SPR_TBL.
On PPC64 the SPR_TBL register acts as 64 bit though, so we get the full
64 bits as return value. If we only take the lower ones, fine. But Linux
wants to see all 64 bits or it breaks.
This patch makes PPC64 Linux work even after TB crossed the 32-bit boundary,
which usually happened a few seconds after bootup.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
In the very least, a change like this requires discussion on the list.
The naming convention is goofy and it causes a massive merge problem. Something
like this _must_ be presented on the list first so people can provide input
and cope with it.
This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Some not so obvious bits, slirp and Xen were left alone for the time
being.
Signed-off-by: malc <av1474@comtv.ru>
|
|
handle_cpu_signal is very nearly copy-paste code for each target, with a
few minor variations. This patch sets up appropriate defaults for a
generic handle_cpu_signal and provides overrides for particular targets
that did things differently. Fixing things like the persistent (XXX:
use sigsetjmp) should now become somewhat easier.
Previous comments on this patch suggest that the "activate soft MMU for
this block" comments refer to defunct functionality. I have removed
such blocks for the appropriate targets in this patch.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
We define inline as always_inline.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
We do this so we can check on the corresponding stc{w,d}x. whether the
value has changed. It's a poor man's form of implementing atomic
operations and is valid only for NPTL usermode Linux emulation.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
We only need to make sure that the clone syscall looks like it
succeeded, not clobber 60% of the register set.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.
Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.
Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: Paul Brook <paul@codesourcery.com>
|
|
Do this so other pieces of code can make decisions based on the
capabilities of the CPU we're emulating.
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
Signed-off-by: malc <av1474@comtv.ru>
|
