aboutsummaryrefslogtreecommitdiff
path: root/target-mips
AgeCommit message (Collapse)Author
2015-11-24target-mips: flush QEMU TLB when disabling 64-bit addressingLeon Alrae
CP0.Status.KX/SX/UX bits are responsible for enabling access to 64-bit Kernel/Supervisor/User Segments. If bit is cleared an access to corresponding segment should generate Address Error Exception. However, the guest may still be able to access some pages belonging to the disabled 64-bit segment because we forget to flush QEMU TLB. This patch fixes it. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-11-24target-mips: Fix exceptions while UX=0James Hogan
Commit 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit address wrapping") added a new hflag MIPS_HFLAG_AWRAP, which indicates that 64-bit addressing is disallowed in the current mode, so hflag users don't need to worry about the complexities of working that out, for example checking both MIPS_HFLAG_KSU and MIPS_HFLAG_UX. However when exceptions are taken outside of exception level, mips_cpu_do_interrupt() manipulates the env->hflags directly rather than using compute_hflags() to update them, and this code wasn't updated accordingly. As a result, when UX is cleared, MIPS_HFLAG_AWRAP is set, but it doesn't get cleared on entry back into kernel mode due to an exception. Kernel mode then cannot access the 64-bit segments resulting in a nested exception loop. The same applies to errors and debug exceptions. Fix by updating mips_cpu_do_interrupt() to clear the MIPS_HFLAG_WRAP flag when necessary, according to compute_hflags(). Fixes: 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit...") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-30target-mips: fix updating XContext on mmu exceptionYongbok Kim
Correct updating XContext.Region field on mmu exceptions. If Config3.CTXTC = 0 then the R field of XContext has to be updated with the value of bits 63..62 of the virtual address upon a TLB exception. Also fixed the below line which overs 80 characters. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-30target-mips: add SIGRIE instructionYongbok Kim
Add SIGRIE (Signal Reserved Instruction Exception) for both MIPS and microMIPS. The instruction allows to use the 16-bit code field for software use. This instruction is introduced by and required as of Release 6. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-30target-mips: Set Config5.XNP for R6 coresYongbok Kim
Set Config5.XNP for R6 cores to indicate the extended LL/SC family of instructions NOT present. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-30target-mips: add PC, XNP reg numbers to RDHWRYongbok Kim
Add Performance Counter (4) and XNP (5) register numbers to RDHWR. Add check_hwrena() to simplify access control checkings. Add RDHWR support to microMIPS R6. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-29target-mips: Add enum for BREAK32Yongbok Kim
Add enum for BREAK32 Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-29target-mips: update writing to CP0.Status.KX/SX/UX in MIPS Release R6Leon Alrae
Implement the relationship between CP0.Status.KX, SX and UX. It should not be possible to set UX bit if SX is 0, the same applies for setting SX if KX is 0. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-29target-mips: implement the CPU wake-up on non-enabled interrupts in R6Leon Alrae
In Release 6, the behaviour of WAIT has been modified to make it a requirement that a processor that has disabled operation as a result of executing a WAIT will resume operation on arrival of an interrupt even if interrupts are not enabled. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-29target-mips: move the test for enabled interrupts to a separate functionLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-28target-*: Advance pc after recognizing a breakpointRichard Henderson
Some targets already had this within their logic, but make sure it's present for all targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-22disas: QOMify mips specific disas setupPeter Crosthwaite
Move the target_disas() mips specifics to the CPUClass::disas_set_info() hook and delete the #ifdef specific code in disas.c. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-10-19kvm: Pass PCI device pointer to MSI routing functionsPavel Fedin
In-kernel ITS emulation on ARM64 will require to supply requester IDs. These IDs can now be retrieved from the device pointer using new pci_requester_id() function. This patch adds pci_dev pointer to KVM GSI routing functions and makes callers passing it. x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c also made passing PCI device pointer instead of NULL for consistency with the rest of the code. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-09qdev: Protect device-list-properties against broken devicesMarkus Armbruster
Several devices don't survive object_unref(object_new(T)): they crash or hang during cleanup, or they leave dangling pointers behind. This breaks at least device-list-properties, because qmp_device_list_properties() needs to create a device to find its properties. Broken in commit f4eb32b "qmp: show QOM properties in device-list-properties", v2.1. Example reproducer: $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}} { "execute": "qmp_capabilities" } {"return": {}} { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } } qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. Aborted (core dumped) [Exit 134 (SIGABRT)] Unfortunately, I can't fix the problems in these devices right now. Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet to mark them: * Hang during cleanup (didn't debug, so I can't say why): "realview_pci", "versatile_pci". * Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic", "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such CPUs * Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu", "host-powerpc64-cpu", "host-embedded-powerpc-cpu", "host-powerpc-cpu" (the powerpc ones can't currently reach the assertion, because the CPUs are only registered when KVM is enabled, but the assertion is arguably in the wrong place all the same) Make qmp_device_list_properties() fail cleanly when the device is so marked. This improves device-list-properties from "crashes, hangs or leaves dangling pointers behind" to "fails". Not a complete fix, just a better-than-nothing work-around. In the above reproducer, device-list-properties now fails with "Can't list properties of device 'pxa2xx-pcmcia'". This also protects -device FOO,help, which uses the same machinery since commit ef52358 "qdev-monitor: include QOM properties in -device FOO, help output", v2.2. Example reproducer: $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help Before: qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. After: Can't list properties of device 'pxa2xx-pcmcia' Cc: "Andreas Färber" <afaerber@suse.de> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Green <green@moxielogic.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Jia Liu <proljc@gmail.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Cc: qemu-ppc@nongnu.org Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
2015-10-07tcg: Remove gen_intermediate_code_pcRichard Henderson
It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Pass data argument to restore_state_to_opcRichard Henderson
The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Add TCG_MAX_INSNSRichard Henderson
Adjust all translators to respect it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Drop cpu_gen_code defineRichard Henderson
This symbol no longer exists. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-mips: Add delayed branch state to insn_startRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Introduce and use cpu_breakpoint_testRichard Henderson
Reduce the boilerplate required for each target. At the same time, move the test for breakpoint after calling tcg_gen_insn_start. Note that arm and aarch64 do not use cpu_breakpoint_test, but still move the inline test down after tcg_gen_insn_start. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Increment num_insns immediately after tcg_gen_insn_startRichard Henderson
This does tidy the icount test common to all targets. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Unconditionally emit tcg_gen_insn_startRichard Henderson
While we're at it, emit the opcode adjacent to where we currently record data for search_pc. This puts gen_io_start et al on the "correct" side of the marker. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Rename debug_insn_start to insn_startRichard Henderson
With an eye toward making it mandatory. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-25mips: Remove ELF_MACHINE from cpu.hPeter Crosthwaite
The only generic code relying on this is linux-user, but linux users' default behaviour of defaulting ELF_MACHINE to ELF_ARCH will handle this. The bootloaders can just pass EM_MIPS directly, as that is architecture specific code. This removes another architecture specific definition from the global namespace. Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-18target-mips: improve exception handlingPavel Dovgaluk
This patch improves exception handling in MIPS. Instructions generate several types of exceptions. When exception is generated, it breaks the execution of the current translation block. Implementation of the exceptions handling does not correctly restore icount for the instruction which caused the exception. In most cases icount will be decreased by the value equal to the size of TB. This patch passes pointer to the translation block internals to the exception handler. It allows correct restoring of the icount value. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: avoid retranslation in linux-user SC, break lines which are over 80 chars, remove v3 changelog from the commit message] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-18target-mips: correct MTC0 instruction on MIPS64Leon Alrae
MTC0 on a 64-bit processor should move entire 64-bit GPR content to CP0 register. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-09-18target-mips: add missing restriction in DAUI instructionLeon Alrae
rs cannot be the zero register, Reserved Instruction exception must be signalled for this case. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-09-18target-mips: get rid of MIPS_DEBUG_SIGN_EXTENSIONSAurelien Jarno
MIPS_DEBUG_SIGN_EXTENSIONS was used sometimes ago to verify that 32-bit instructions correctly sign extend their results. It's now not need anymore, remove it. Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-18target-mips: get rid of MIPS_DEBUGAurelien Jarno
MIPS_DEBUG is a define used to dump the instruction disassembling. It has to be defined at compile time. In practice I believe it's more efficient to just look at the instruction disassembly and op dump using -d in_asm,op. This patch therefore removes the corresponding code, which clutters translate.c. Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-18target-mips: Fix RDHWR on CP0.CountAlex Smith
For RDHWR on the CP0.Count register, env->CP0_Count was being returned. This value is a delta against the QEMU_CLOCK_VIRTUAL clock, not the correct current value of CP0.Count. Use cpu_mips_get_count() instead. Signed-off-by: Alex Smith <alex.smith@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-18target-mips: remove wrong checks for recip.fmt and rsqrt.fmtPetar Jovanovic
Instructions recip.{s|d} and rsqrt.{s|d} do not require 64-bit FPU neither they require any particular mode for its FPU. This patch removes the checks that may break a program that uses these instructions. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-18target-mips: Use tcg_gen_extrh_i64_i32Richard Henderson
We can tidy gen_load_fpr32h, as well as introduce a helper to cleanup the MACC instructions. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-11tlb: Add "ifetch" argument to cpu_mmu_index()Benjamin Herrenschmidt
This is set to true when the index is for an instruction fetch translation. The core get_page_addr_code() sets it, as do the SOFTMMU_CODE_ACCESS acessors. All targets ignore it for now, and all other callers pass "false". This will allow targets who wish to split the mmu index between instruction and data accesses to do so. A subsequent patch will do just that for PowerPC. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Message-Id: <1439796853-4410-2-git-send-email-benh@kernel.crashing.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-11typofixes - v4Veres Lajos
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for signal.hDaniel P. Berrange
A number of files were including signal.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-08-24tcg: Remove tcg_gen_trunc_i64_i32Richard Henderson
Replacing it with tcg_gen_extrl_i64_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-13target-mips: Use CPU_LOG_INT for logging related to interruptsRichard Henderson
There are now no unconditional uses of qemu_log in the subdirectory. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-08-13target-mips: simplify LWL/LDL mask generationAurelien Jarno
The LWL/LDL instructions mask the GPR with a mask depending on the address alignement. It is currently computed by doing: mask = 0x7fffffffffffffffull >> (t1 ^ 63) It's simpler to generate it by doing: mask = ~(-1 << t1) It uses one TCG instruction less, and it avoids a 32/64-bit constant loading which can take a few instructions on RISC hosts. Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-08-13target-mips: update mips32r5-generic into P5600Yongbok Kim
As full specification of P5600 is available, mips32r5-generic should be renamed to P5600 and corrected as its intention. Correct PRid and detail of configuration. Features which are not currently supported are described as FIXME. Fix Config.MM bit location Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> [leon.alrae@imgtec.com: correct cache line sizes and LLAddr shift] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-08-04target-mips: Copy restrictions from ext/ins to dext/dinsRichard Henderson
The checks in dins is required to avoid triggering an assertion in tcg_gen_deposit_tl. The check in dext is just for completeness. Fold the other D cases in via fallthru. In this case the errant dins appears to be data, not code, as translation failed to stop after a break insn. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-08-04target-mips: fix semihosting for microMIPS R6Leon Alrae
In semihosting mode the SDBBP 1 instructions should trigger UHI syscall, but in QEMU this does not happen for recently added microMIPS R6. Consequently bare metal microMIPS R6 programs supporting UHI will not run. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-07-28target-mips: fix offset calculation for InterruptsYongbok Kim
Correct computation of vector offsets for EXCP_EXT_INTERRUPT. For instance, if Cause.IV is 0 the vector offset should be 0x180. Simplify the finding vector number logic for the Vectored Interrupts. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: cosmetic changes] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-28target-mips: fix passing incompatible pointer type in machine.cLeon Alrae
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-16mips/kvm: Sign extend registers written to KVMJames Hogan
In case we're running on a 64-bit host, be sure to sign extend the general purpose registers and hi/lo/pc before writing them to KVM, so as to take advantage of MIPS32/MIPS64 compatibility. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: kvm@vger.kernel.org Cc: qemu-stable@nongnu.org Message-Id: <1429871214-23514-3-git-send-email-james.hogan@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-16mips/kvm: Fix Big endian 32-bit register accessJames Hogan
Fix access to 32-bit registers on big endian targets. The pointer passed to the kernel must be for the actual 32-bit value, not a temporary 64-bit value, otherwise on big endian systems the kernel will only interpret the upper half. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: kvm@vger.kernel.org Cc: qemu-stable@nongnu.org Message-Id: <1429871214-23514-2-git-send-email-james.hogan@imgtec.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-15target-mips: fix page fault address for LWL/LWR/LDL/LDRAurelien Jarno
When a LWL, LWR, LDL or LDR instruction triggers a page fault, QEMU currently reports the aligned address in CP0 BadVAddr, while the Windows NT kernel expects the unaligned address. This patch adds a byte access with the unaligned address at the beginning of the LWL/LWR/LDL/LDR instructions to possibly trigger a page fault and fill the QEMU TLB. Cc: Leon Alrae <leon.alrae@imgtec.com> Reported-by: Hervé Poussineau <hpoussin@reactos.org> Tested-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-15target-mips: fix resource leak reported by CoverityLeon Alrae
UHI assert and link operations call lock_user_string() twice to obtain two strings pointed by gpr[4] and gpr[5]. If the second lock_user_string() fails, then the first one won't get freed. Fix this by introducing another macro responsible for obtaining two strings and handling allocation failure. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-07-15target-mips: fix logically dead code reported by CoverityLeon Alrae
Make use of CMPOP in floating-point compare instructions. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-07-15target-mips: correct DERET instructionLeon Alrae
Fix Debug Mode flag clearing, and when DERET is placed between LL and SC do not make SC fail. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-07-15target-mips: fix ASID synchronisation for MIPS MTAurelien Jarno
When syncing the task ASID with EntryHi, correctly or the value instead of assigning it. Reported-by: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 08:20:00 +0000