aboutsummaryrefslogtreecommitdiff
path: root/target-mips
AgeCommit message (Collapse)Author
2012-12-08Merge branch 'master' of git.qemu-project.org:/pub/git/qemuBlue Swirl
* 'master' of git.qemu-project.org:/pub/git/qemu: target-mips: Fix incorrect shift for SHILO and SHILOV target-mips: Fix incorrect code and test for INSV xilinx_uartlite: Accept input after rx FIFO pop xilinx_uartlite: suppress "cannot receive message" xilinx_axienet: Implement R_IS behaviour
2012-12-08TCG: Use gen_opc_instr_start from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_icount from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-08TCG: Use gen_opc_pc from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-12-06target-mips: Fix incorrect shift for SHILO and SHILOVPetar Jovanovic
helper_shilo has not been shifting an accumulator value correctly for negative values in 'shift' field. Minor optimization for shift=0 case. This change also adds tests that will trigger issue and check for regressions. Signed-off-by: Petar Jovanovic <petarj@mips.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-12-06target-mips: Fix incorrect code and test for INSVPetar Jovanovic
Content of register rs should be shifted for pos before applying a mask. This change contains both fix for the instruction and to the existing test. Signed-off-by: Petar Jovanovic <petarj@mips.com> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: remove POOL48A from the microMIPS decodingAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Clean up microMIPS32 major opcode陳韋任 (Wei-Ren Chen)
I check MIPS microMIPS manual [1], and found the major opcode might be wrong. I add a comment to explicitly indicate what manual I am refering to, and according that manual I remove microMIPS32 major opcodes 0x1f. As for others, like 0x16, 0x17, 0x36 and 0x37, they are for higher-order MIPS ISA level or new revision of this microMIPS architecture. Quote from Johnson, they are belong MIPS64 [2]. [1] http://www.mips.com/products/architectures/micromips/#specifications MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set (Revision 3.05) MD00582-2B-microMIPS-AFP-03.05.pdf [2] http://www.mips.com/products/architectures/mips64/ MIPS Architecture For Programmers Volume II-A: The MIPS64 Instruction Set MD00087-2B-MIPS64BIS-AFP-03.51.pdf Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-24target-mips: Add comments on POOL32Axf encoding陳韋任 (Wei-Ren Chen)
Current QEMU MIPS POOL32AXF encoding comes from microMIPS32 and microMIPS32 DSP. Add comment here to help reading. Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-17TCG: Use gen_opc_buf from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-17TCG: Use gen_opc_ptr from context instead of global variable.Evgeny Voevodin
Signed-off-by: Evgeny Voevodin <e.voevodin@samsung.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-11-15target-mips: fix wrong microMIPS opcode encoding陳韋任 (Wei-Ren Chen)
While reading microMIPS decoding, I found a possible wrong opcode encoding. According to [1] page 166, the bits 13..12 for MULTU is 0x01 rather than 0x00. Please review, thanks. [1] MIPS Architecture for Programmers VolumeIV-e: The MIPS DSP Application-Specific Extension to the microMIPS32 Architecture Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-11target-mips: Fix seg fault for LUI when MIPS_DEBUG_DISAS==1.Eric Johnson
The call to gen_logic_imm for OPC_LUI passes -1 for rs. This causes the MIPS_DEBUG statement to seg fault due to the deference of regnames[rs]. This patch fixes that. Signed-off-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> (aurel32: replaced static string formating by a static string)
2012-11-10disas: avoid using cpu_single_envBlue Swirl
Pass around CPUArchState instead of using global cpu_single_env. Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Acked-by: Richard Henderson <rth@twiddle.net> Acked-by: Aurelien Jarno <aurelien@aurel32.net> Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
2012-11-05target-mips: use ULL for 64 bit constantsBlue Swirl
Fix build on a 32 bit host: CC mips-softmmu/target-mips/dsp_helper.o /src/qemu/target-mips/dsp_helper.c: In function 'helper_dextr_rs_w': /src/qemu/target-mips/dsp_helper.c:3556: error: integer constant is too large for 'long' type /src/qemu/target-mips/dsp_helper.c: In function 'helper_extr_s_h': /src/qemu/target-mips/dsp_helper.c:3656: error: integer constant is too large for 'long' type Signed-off-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-11-01Merge remote-tracking branch 'afaerber/qom-cpu' into stagingAnthony Liguori
* afaerber/qom-cpu: (35 commits) target-i386: Pass X86CPU to kvm_handle_halt() target-i386: Pass X86CPU to kvm_get_mp_state() cpu: Move thread_id to CPUState cpus: Pass CPUState to run_on_cpu() target-i386: Pass X86CPU to cpu_x86_inject_mce() target-i386: Pass X86CPU to kvm_mce_inject() cpus: Pass CPUState to [qemu_]cpu_has_work() spapr: Pass PowerPCCPU to hypercalls spapr: Pass PowerPCCPU to spapr_hypercall() target-ppc: Pass PowerPCCPU to cpu_ppc_hypercall target-ppc: Pass PowerPCCPU to powerpc_excp() xtensa_pic: Pass XtensaCPU to xtensa_ccompare_cb() cpus: Pass CPUState to qemu_wait_io_event_common() cpus: Pass CPUState to flush_queued_work() cpu: Move queued_work_{first,last} to CPUState cpus: Pass CPUState to qemu_cpu_kick() target-ppc: Rename kvm_kick_{env => cpu} and pass PowerPCCPU ppc: Pass PowerPCCPU to {ppc6xx,ppc970,power7,ppc40x,ppce500}_set_irq() cpus: Pass CPUState to qemu_tcg_init_vcpu() cpus: Pass CPUState to qemu_tcg_cpu_thread_fn ... Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-10-31target-mips: don't flush extra TLB on permissions upgradeAurelien Jarno
If the guest uses a TLBWI instruction for upgrading permissions, we don't need to flush the extra TLBs. This improve boot time performance by about 10%. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: fix TLBR wrt SEGMaskAurelien Jarno
Like r4k_map_address(), r4k_helper_tlbp() should use SEGMask to mask the address. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use deposit instead of hardcoded versionAurelien Jarno
Use the deposit op instead of and hardcoded bit field insertion. It allows the host to emit the corresponding instruction if available. At the same time remove the (lsb > msb) test. The MIPS64R2 instruction set manual says "Because of the instruction format, lsb can never be greater than msb, so there is no UNPREDICATABLE case for this instruction." (Bug reported as LP:1071149.) Cc: Никита Канунников <n.kanunnikov@sbtcom.ru> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: optimize ddiv/ddivu/div/divu with movcondAurelien Jarno
The result of a division by 0, or a division of INT_MIN by -1 in the signed case, is unpredictable. Just replace 0 by 1 in that case so that it doesn't trigger a floating point exception on the host. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: implement movn/movz using movcondAurelien Jarno
Avoid the branches in movn/movz implementation and replace them with movcond. Also update a wrong command. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: don't use local temps for store conditionalAurelien Jarno
Store conditional operations only need local temps in user mode. Fix the code to use temp local only in user mode, this spares two memory stores in system mode. At the same time remove a wrong a wrong copied & pasted comment, store operations don't have a register destination. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: implement unaligned loads using TCGAurelien Jarno
Load/store from helpers should be avoided as they are quite inefficient. Rewrite unaligned loads instructions using TCG and aligned loads. The number of actual loads operations to implement an unaligned load instruction is reduced from up to 8 to 1. Note: As we can't rely on shift by 32 or 64 undefined behaviour, the code loads already shift by one constants. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: simplify load/store microMIPS helpersAurelien Jarno
load/store microMIPS helpers are reinventing the wheel. Call do_lw, do_ll, do_sw and do_sl instead of using a macro calling the cpu_* load/store functions. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: optimize load operationsAurelien Jarno
Only allocate t1 when needed. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: cleanup load/store operationsAurelien Jarno
Load/store operations use macros for historical reasons. Now that there is no point in keeping them, replace them by direct calls to qemu_ld/st. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: restore CPU state after an FPU exceptionAurelien Jarno
Rework *raise_exception*() functions so that they can be called from other helpers, passing the return address as an argument. Use do_raise_exception() function in update_fcr31() to correctly restore the CPU state after an FPU exception. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use softfloat constants when possibleAurelien Jarno
softfloat already has a few constants defined, use them instead of redefining them in target-mips. Rename FLOAT_SNAN32 and FLOAT_SNAN64 to FP_TO_INT32_OVERFLOW and FP_TO_INT64_OVERFLOW as even if they have the same value, they are technically different (and defined differently in the MIPS ISA). Remove the unused constants. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: cleanup float to int conversion helpersAurelien Jarno
Instead of accessing the flags from the floating point control register after updating it, read the softfloat flags. This is just code cleanup and should not change the behaviour. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: fix FPU exceptionsAurelien Jarno
For each FPU instruction that can trigger an FPU exception, to call call update_fcr31() after. Remove the manual NaN assignment in case of float to float operation, as softfloat is already taking care of that. However for float to int operation, the value has to be changed to the MIPS one. In the cvtpw_ps case, the two registers have to be handled separately to guarantee a correct final value in both registers. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: keep softfloat exception set to 0 between instructionsAurelien Jarno
Instead of clearing the softfloat exception flags before each floating point instruction, reset them to 0 in update_fcr31() when an exception is detected. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: use the softfloat floatXX_muladd functionsAurelien Jarno
Use the new softfloat floatXX_muladd() functions to implement the madd, msub, nmadd and nmsub instructions. At the same time replace the name of the helpers by the name of the instruction, as the only reason for the previous names was to keep the macros simple. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: do not save CPU state when using retranslationAurelien Jarno
When the CPU state after a possible retranslation is going to be handled through code retranslation, we don't need to save the CPU state before. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: correctly restore btarget upon exceptionAurelien Jarno
When the CPU state is restored through retranslation after an exception, btarget should also be restored. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: remove #if defined(TARGET_MIPS64) in opcode enumsAurelien Jarno
All switch() decoding instruction have a default entry, so it is possible to have unused enum entries. Remove conditional definitions of MIPS64 opcode enums, as it only makes the code less readable. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Change TODO fileJia Liu
Change DSP r1 & DSP r2 into microMIPS DSP encodings in TODO file. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP processorsJia Liu
Add 74kf and mips64dspr2-generic-cpu model for test. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP accumulator instructionsJia Liu
Add MIPS ASE DSP Accumulator and DSPControl Access instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP compare-pick instructionsJia Liu
Add MIPS ASE DSP Compare-Pick instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP bit/manipulation instructionsJia Liu
Add MIPS ASE DSP Bit/Manipulation instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP multiply instructionsJia Liu
Add MIPS ASE DSP Multiply instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP GPR-based shift instructionsJia Liu
Add MIPS ASE DSP GPR-Based Shift instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP arithmetic instructionsJia Liu
Add MIPS ASE DSP Arithmetic instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP load instructionsJia Liu
Add MIPS ASE DSP Load instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP branch instructionsJia Liu
Add MIPS ASE DSP Branch instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31Use correct acc value to index cpu_HI/cpu_LO rather than using a fix numberJia Liu
Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP resources access checkJia Liu
Add MIPS ASE DSP resources access check. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31target-mips: Add ASE DSP internal functionsJia Liu
Add internal functions using by MIPS ASE DSP instructions. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-31cpus: Pass CPUState to [qemu_]cpu_has_work()Andreas Färber
For target-mips also change the return type to bool. Make include paths for cpu-qom.h consistent for alpha and unicore32. Signed-off-by: Andreas Färber <afaerber@suse.de> [AF: Updated new target-openrisc function accordingly] Acked-by: Richard Henderson <rth@twiddle.net> (for alpha)
2012-10-28target-mips: Use TCG registers for the FPU.Richard Henderson
With normal FP, this doesn't have much affect on the generated code, because most of the FP operations are not CONST/PURE, and so we spill registers in about the same frequency as the explicit load/stores. But with Loongson multimedia instructions, which are all integral and whose helpers are in fact CONST+PURE, this greatly improves the code. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 07:07:11 +0000