aboutsummaryrefslogtreecommitdiff
path: root/target-mips
AgeCommit message (Collapse)Author
2013-07-29cpu: Partially revert "cpu: Change qemu_init_vcpu() argument to CPUState"Andreas Färber
Commit c643bed99 moved qemu_init_vcpu() calls to common CPUState code. This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed". The reason for the failure is that CPUClass::kvm_fd is not yet initialized in the following call graph: ->x86_cpu_realizefn ->x86_cpu_apic_realize ->qdev_init ->device_set_realized ->device_reset (hotplugged == 1) ->apic_reset_common ->vapic_base_update ->kvm_apic_vapic_base_update This causes attempted KVM vCPU ioctls to fail. By contrast, in the non-hotplug case the APIC is reset much later, when the vCPU is already initialized. As a quick and safe solution, move the qemu_init_vcpu() call back into the targets' realize functions. Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386) Tested-by: Jia Liu <proljc@gmail.com> (for openrisc) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29target-mips: fix mipsdsp_mul_q31_q31Petar Jovanovic
Multiplication of two fractional word elements is not correct when sign extension/promotion is needed. This change fixes it by adding correct casts from unsigned to signed values. In addition, the tests (dpaq_sa_l_w.c and dpsq_sa_l_w.c) have been extended to trigger the current issue. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29target-mips: Remove assignment to a variable which is never usedStefan Weil
This assignment causes a compiler warning for compilations with the compiler option -Wunused-but-set-variable (which is included with -Wextra). Removing it allows using -Wextra for QEMU code without suppressing too many extra warnings. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29target-mips: fix mipsdsp_trunc16_sat16_roundPetar Jovanovic
This change corrects rounding and saturation of Q31 fractional value in mipsdsp_trunc16_sat16_round(). Overflow detection was incorrect for the corner case for PRECRQ_RS.PH, and this test case is also part of the change. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28target-mips: fix branch in likely delay slot tcg assertJames Hogan
When a branch delay slot contains another branch instruction, the code generated raises an exception, however since is_branch==1, handle_delay_slot() doesn't get called immediately. This means ctx->bstate isn't set to BS_BRANCH, and the decoder continues decoding until a non-branch instruction is found. If the first branch was a branch likely instruction then each instruction after it generates code for the unlikely case, to go to the next tb starting after the delay slot. This results in multiple goto_tb tcg ops being generated with the same exit number. When debug is enabled this hits: tcg-op.h:2589: tcg_gen_goto_tb: Assertion `(tcg_ctx.goto_tb_issue_mask & (1 << idx)) == 0' failed. This is fixed by removing is_branch entirely, and calling handle_delay_slot() if (ctx.hflags & MIPS_HFLAG_BMASK) was set prior to the current instruction being decoded. This still prevents handle_delay_slot() being called immediately after a branch but allows it to still be called after a branch within a delay slot. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28target-mips: fix multiplication in mipsdsp_rndq15_mul_q15_q15Petar Jovanovic
Multiplication of Q15 fractional halfword vectors was incorrect in the previous implementation of mipsdsp_rndq15_mul_q15_q15. It failed to take element signs into account. This change fixes it, and it adds a test case for it. The change also removes unnecessary cast in the function mipsdsp_mul_q15_q15_overflowflag21(). Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-27cpu: Introduce CPUClass::gdb_{read,write}_register()Andreas Färber
Completes migration of target-specific code to new target-*/gdbstub.c. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functionsAndreas Färber
This avoids polluting the global namespace with a non-prefixed macro and makes it obvious in the call sites that we return. Semi-automatic conversion using, e.g., sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c followed by manual tweaking for sparc's GET_REGA() and Coding Style. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26target-mips: Move cpu_gdb_{read,write}_register()Andreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regsAndreas Färber
CPUState::gdb_num_regs replaces num_g_regs. CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS. Allows building gdb_register_coprocessor() for xtensa, too. As a side effect this should fix coprocessor register numbering for SMP. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Move singlestep_enabled field from CPU_COMMON to CPUStateAndreas Färber
Prepares for changing cpu_single_step() argument to CPUState. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()Andreas Färber
Where no extra implementation is needed, fall back to CPUClass::set_pc(). Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Introduce CPUClass::set_pc() for gdb_set_cpu_pc()Andreas Färber
This moves setting the Program Counter from gdbstub into target code. Use vaddr type as upper-bound replacement for target_ulong. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Move reset logging to CPUStateAndreas Färber
x86 was using additional CPU_DUMP_* flags, so make that configurable in CPUClass::reset_dump_flags. This adds reset logging for alpha, unicore32 and xtensa. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09target-mips: Change gen_intermediate_code_internal() argument to MIPSCPUAndreas Färber
Also use bool type while at it. Prepares for moving singlestep_enabled field to CPUState. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Drop unnecessary dynamic casts in *_env_get_cpu()Andreas Färber
A transition from CPUFooState to FooCPU can be considered safe, just like FooCPU::env access in the opposite direction. The only benefit of the FOO_CPU() casts would be protection against bogus CPUFooState pointers, but then surrounding code would likely break, too. This should slightly improve interrupt etc. performance when going from CPUFooState to FooCPU. For any additional CPU() casts see 3556c233d931ad5ffa46a35cb25cfc057732ebb8 (qom: allow turning cast debugging off). Reported-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_unassigned_access() into a CPUState hookAndreas Färber
Use it for all targets, but be careful not to pass invalid CPUState. cpu_single_env can be NULL, e.g. on Xen. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Change qemu_init_vcpu() argument to CPUStateAndreas Färber
This allows to move the call into CPUState's realizefn. Therefore move the stub into libqemustub.a. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_dump_{state,statistics}() into CPUState hooksAndreas Färber
Make cpustats monitor command available unconditionally. Prepares for changing kvm_handle_internal_error() and kvm_cpu_exec() arguments to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-20linux-user: Save the correct resume address for MIPS signal handlingKwok Cheung Yeung
The current ISA mode needs to be saved in bit 0 of the resume address. If the current instruction happens to be in a branch delay slot, then the address of the preceding jump instruction should be stored instead. exception_resume_pc already does both of these tasks, so it is made available and reused. MIPS_HFLAG_BMASK in hflags is cleared, otherwise QEMU may treat the first instruction of the signal handler as a delay slot instruction. Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-20target-mips: clean-up in BIT_INSVPetar Jovanovic
This is a small follow-up change to "fix incorrect behaviour for INSV". It includes two minor modifications: - sizefilter is constant so it can be moved inside of the block, - several lines of the code are replaced with a call to deposit64. No functional change. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-19target-mips: set carry bit correctly in DSPControl registerPetar Jovanovic
First we need to clear the bit and then we set the given value. Instruction ADDSC sets the bit and instruction ADDWC uses this bit. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-19target-mips: fix EXTPDP and setting up pos field in the DSPControl regPetar Jovanovic
This change makes sure that modifications of pos field in the DSPControl register do not trash other bits in the register. This bug can be triggered with the additional test case in mips32-dsp/extpdp.c in this commit. In addition to this, this change corrects incorrect calculation of the mask for EXTPDP. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-17target-mips: fix incorrect behaviour for EXTPPetar Jovanovic
The mask for EXTP instruction when size=31 has not been correctly calculated. The test (mips32-dsp/extp.c) has been extended to include the case that triggers the issue. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-08target-mips: fix incorrect behaviour for INSVPetar Jovanovic
Corner case for INSV instruction when size=32 has not been correctly implemented. The mask for size should be one bit wider, and preparing the filter variable should be aware of this case too. The test for INSV has been extended to include the case that triggers the bug. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-08target-mips: add missing check_dspr2 for multiply instructionsPetar Jovanovic
The emulator needs to check in hflags if DSP unit has been turned off before it generates code for MUL_PH, MUL_S_PH, MULQ_S_W, and MULQ_RS_W. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-05-03target-mips: fix calculation of overflow for SHLL.PH and SHLL.QBPetar Jovanovic
This change corrects and simplifies how discard is calculated for shift left logical vector instructions. It is used to detect overflow and set bit 22 in the DSPControl register. The existing tests (shll_ph.c, shll_qb.c) are extended with the corner cases that expose incorrectness in the previous implementation. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-04-15target-mips: fix mipsdsp_mul_q15_q15 and tests for MAQ_SA_W_PHL/PHRPetar Jovanovic
The operands for MAQ_SA_W.PHL/MAQ_SA_W.PHR must in specified format. Otherwise, the results are unpredictable. Once the operands were corrected in the tests (part of this change), a bug in mipsdsp_mul_q15_q15 became visible. This change corrects the tests for MAQ_SA_W.PHL/MAQ_SA_W.PHR and fixes sign-related issue in mipsdsp_mul_q15_q15. It also removes unnecessary comment. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com>
2013-03-17target-mips: fix rndrashift_short_acc and code for EXTR_ instructionsPetar Jovanovic
Fix for rndrashift_short_acc to set correct value to higher 64 bits. This change also corrects conditions when bit 23 of the DSPControl register is set. The existing test files have been extended with several examples that trigger the issues. One bug/example in the test file for EXTR_RS_W has been found and reported by Klaus Peichl. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Pass CPUState to cpu_interrupt()Andreas Färber
Move it to qom/cpu.h to avoid issues with include order. Change pc_acpi_smi_interrupt() opaque to X86CPU. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12exec: Pass CPUState to cpu_reset_interrupt()Andreas Färber
Move it to qom/cpu.c to avoid build failures depending on include order of cpu-qom.h and exec/cpu-all.h. Change opaques of various ..._irq_handler() functions to the appropriate CPU type to facilitate using cpu_reset_interrupt(). Fix Coding Style issues while at it (missing braces, indentation). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-12cpu: Move halted and interrupt_request fields to CPUStateAndreas Färber
Both fields are used in VMState, thus need to be moved together. Explicitly zero them on reset since they were located before breakpoints. Pass PowerPCCPU to kvmppc_handle_halt(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-05mips64-linux-user: Enable 64-bit address mode and fpuRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05mips-linux-user: Save and restore fpu and dsp from sigcontextRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-05target-mips: Fix accumulator selection for MIPS16 and microMIPSRichard Sandiford
Add accumulator arguments to gen_HILO and gen_muldiv, rather than extracting the accumulator directly from ctx->opcode. The extraction was only right for the standard encoding: MIPS16 doesn't have access to the DSP registers, while microMIPS encodes the accumulator register in a different field (bits 14 and 15). Passing the accumulator register is probably an over-generalisation for division and 64-bit multiplication, which never access anything other than HI and LO, and which always pass 0 as the new argument. Separating them felt a bit fussy though. Signed-off-by: Richard Sandiford <rdsandiford@googlemail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-04target-mips: fix DSP overflow macro and affected routinesPetar Jovanovic
The previous implementation incorrectly used same macro to detect overflow for addition and subtraction. This patch makes distinction between these two, and creates separate macros. The affected routines are changed accordingly. This change also includes additions to the existing tests for SUBQ_S_PH and SUBQ_S_W that would trigger the fixed issue, and it removes dead code from the test file. The last test case in subq_s_w.c is a bug found/reported/ isolated by Klaus Peichl from Dolby. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-03gen-icount.h: Rename gen_icount_start/end to gen_tb_start/endPeter Maydell
The gen_icount_start/end functions are now somewhat misnamed since they are useful for generic "start/end of TB" code, used for more than just icount. Rename them to gen_tb_start/end. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-03cpu: Introduce ENV_OFFSET macrosAndreas Färber
Introduce ENV_OFFSET macros which can be used in non-target-specific code that needs to generate TCG instructions which reference CPUState fields given the cpu_env register that TCG targets set up with a pointer to the CPUArchState struct. Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-23target-mips: fix for sign-issue in MULQ_W helperPetar Jovanovic
Correct sign-propagation before multiplication in MULQ_W helper. The change also fixes previously incorrect expected values in the tests for MULQ_RS.W and MULQ_S.W. Signed-off-by: Petar Jovanovic <petarj@mips.com> Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23target-mips: fix for incorrect multiplication with MULQ_S.PHPetar Jovanovic
The change corrects sign-related issue with MULQ_S.PH. It also includes extension to the already existing test which will trigger the issue. Signed-off-by: Petar Jovanovic <petarj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-02-23target-mips: Use mul[us]2 in [D]MULT[U] insnsRichard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-02-16cpu: Add CPUArchState pointer to CPUStateAndreas Färber
The target-specific ENV_GET_CPU() macros have allowed us to navigate from CPUArchState to CPUState. The reverse direction was not supported. Avoid introducing CPU_GET_ENV() macros by initializing an untyped pointer that is initialized in derived instance_init functions. The field may not be called "env" due to it being poisoned. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-mips: Move TCG initialization to MIPSCPU initfnAndreas Färber
Make mips_tcg_init() non-static and add tcg_enabled() check to suppress it for qtest. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-02-16target-mips: Introduce QOM realizefn for MIPSCPUAndreas Färber
Introduce a realizefn and set realized = true from cpu_mips_init(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-31target-mips: enable access to DSP ASE if implementedPetar Jovanovic
compute_hflags() will reset DSP h-flags, so MX bit should be initially set for usermode in cpu_state_reset() if DSP ASE is implemented. This change will bring back user-mode support for DSP ASE, since one of the recent changes broke it. Signed-off-by: Petar Jovanovic <petarj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-30 04:44:39 +0000