aboutsummaryrefslogtreecommitdiff
path: root/target-mips
AgeCommit message (Collapse)Author
2014-03-13cputlb: Change tlb_set_page() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cputlb: Change tlb_flush() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cputlb: Change tlb_flush_page() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13exec: Change cpu_abort() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13translate-all: Change cpu_restore_state() argument to CPUStateAndreas Färber
This lets us drop some local variables in tlb_fill() functions. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu-exec: Change cpu_loop_exit() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13exec: Change tlb_fill() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move breakpoints field from CPU_COMMON to CPUStateAndreas Färber
Most targets were using offsetof(CPUFooState, breakpoints) to determine how much of CPUFooState to clear on reset. Use the next field after CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber
Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_has_work() into a CPUClass hookAndreas Färber
Default to false. Tidy variable naming and inline cast uses while at it. Tested-by: Jia Liu <proljc@gmail.com> (or32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-10target-mips: add user-mode FR switch support for MIPS32r5Petar Jovanovic
Description of UFR feature: Required in MIPS32r5 if floating point is implemented and user-mode FR switching is supported. The UFR register allows user-mode to clear StatusFR by executing a CTC1 to UFR with GPR[0] as input, and read StatusFR by executing a CFC1 to UFR. helper_ctc1 has been extended with an additional parameter rt to check requirements for UFR feature. Definition of mips32r5-generic has been modified to include support for UFR. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config5Petar Jovanovic
Add CP0_Config5, define rw_bitmask and enable modifications. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add support for CP0_Config4Petar Jovanovic
Add CP0_Config4, define rw_bitmask. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2014-02-10target-mips: add CPU definition for MIPS32R5Petar Jovanovic
Add mips32r5-generic among CPU definitions for MIPS. Define ISA_MIPS32R3 and ISA_MIPS32R5. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Eric Johnson <eric.johnson@imgtec.com>
2013-12-21target-mips: Use new qemu_ld/st opcodesAurelien Jarno
Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-09target-mips: Use macro ARRAY_SIZE where possibleStefan Weil
This improves readability and simplifies the code. Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-09target-mips: fix 64-bit FPU config for user-mode emulationPetar Jovanovic
FR bit should be initialized to 1 for MIPS64, under condition that this bit is writable and that CPU has an FPU unit. It should be initialized to zero for MIPS32. This fixes different MIPS32 issues with FPU instructions whose behaviour defaulted to 64-bit FPU mode. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-12-02misc: Replace 'struct QEMUTimer' by 'QEMUTimer'Stefan Weil
Most code already used QEMUTimer without the redundant 'struct' keyword. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-10-11Merge remote-tracking branch 'rth/tcg-pull' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/tcg-pull: exec: Add both big- and little-endian memory helpers tcg: Add qemu_ld_st_i32/64 tcg: Add TCGMemOp configure: Remove CONFIG_QEMU_LDST_OPTIMIZATION tcg: Add tcg-be-ldst.h tcg: Add tcg-be-null.h exec: Delete is_tcg_gen_code and GETRA_EXT tcg-aarch64: Update to helper_ret_*_mmu routines tcg: Merge tcg_register_helper into tcg_context_init tcg: Add tcg-runtime.c helpers to all_helpers tcg: Put target helper data into an array. tcg: Remove stray semi-colons from target-*/helper.h tcg: Move helper registration into tcg_context_init target-m68k: Rename helpers.h to helper.h tcg: Use a GHashTable for tcg_find_helper tcg: Delete tcg_helper_get_name declaration tcg-hppa: Remove tcg backend Message-id: 1381440525-6666-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-10-10tcg: Remove stray semi-colons from target-*/helper.hRichard Henderson
During GEN_HELPER=1, these are actually stray top-level semi-colons which are technically invalid ISO C, but GCC accepts as an extension. If we added enough __extension__ markers that we could dare use -Wpedantic, we'd see warning: ISO C does not allow extra ‘;’ outside of a function This will become a hard error in the next patch, wherein those ; will appear in the middle of a data structure. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-10tcg: Move helper registration into tcg_context_initRichard Henderson
No longer needs to be done on a per-target basis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-10-07cpu: Drop cpu_model_str from CPU_COMMONAndreas Färber
Since this is only read in cpu_copy() and linux-user has a global cpu_model, drop the field from generic code. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-03cpu: Use QTAILQ for CPU listAndreas Färber
Introduce CPU_FOREACH(), CPU_FOREACH_SAFE() and CPU_NEXT() shorthand macros. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-09-02tcg: Change tcg_gen_exit_tb argument to uintptr_tRichard Henderson
And update all users. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-08-28target-mips: fix get_physical_address() #if 0 build errorJames Hogan
In get_physical_address() is a qemu_log() call inside an #if 0 block. When enabled the following build error is hit: target-mips/helper.c In function ‘get_physical_address’: target-mips/helper.c:220:13: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘hwaddr’ [-Werror=format] Fix the *physical (hwaddr) formatting by using "%"HWADDR_PRIx instead of TARGET_FMT_lx. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-06target-mips: fix decoding of microMIPS POOL32Axf instructionsLeon Alrae
Fix incorrect assumption that DSP and non-DSP versions of the following instructions have the same encoding: MULT, MULTU, MADD, MADDU, MSUB, MSUBU, MFHI, MFLO, MTHI, MTLO. Correct the existing (non-DSP) instructions and add DSP equivalents. Reference: MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set MIPS Architecture for Programmers Volume IV-e: The MIPS DSP Module for the microMIPS32 Architecture Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-08-03target-mips: fix 34Kf configuration for DSP ASEYongbok Kim
34Kf core does support DSP ASE. CP0_Config3 configuration for 34Kf and description are wrong. Please refer to MIPS32(R) 34Kf(TM) Processor Core Datasheet Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29cpu: Partially revert "cpu: Change qemu_init_vcpu() argument to CPUState"Andreas Färber
Commit c643bed99 moved qemu_init_vcpu() calls to common CPUState code. This causes x86 cpu-add to fail with "KVM: setting VAPIC address failed". The reason for the failure is that CPUClass::kvm_fd is not yet initialized in the following call graph: ->x86_cpu_realizefn ->x86_cpu_apic_realize ->qdev_init ->device_set_realized ->device_reset (hotplugged == 1) ->apic_reset_common ->vapic_base_update ->kvm_apic_vapic_base_update This causes attempted KVM vCPU ioctls to fail. By contrast, in the non-hotplug case the APIC is reset much later, when the vCPU is already initialized. As a quick and safe solution, move the qemu_init_vcpu() call back into the targets' realize functions. Reported-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Acked-by: Igor Mammedov <imammedo@redhat.com> (for i386) Tested-by: Jia Liu <proljc@gmail.com> (for openrisc) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-29target-mips: fix mipsdsp_mul_q31_q31Petar Jovanovic
Multiplication of two fractional word elements is not correct when sign extension/promotion is needed. This change fixes it by adding correct casts from unsigned to signed values. In addition, the tests (dpaq_sa_l_w.c and dpsq_sa_l_w.c) have been extended to trigger the current issue. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29target-mips: Remove assignment to a variable which is never usedStefan Weil
This assignment causes a compiler warning for compilations with the compiler option -Wunused-but-set-variable (which is included with -Wextra). Removing it allows using -Wextra for QEMU code without suppressing too many extra warnings. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-29target-mips: fix mipsdsp_trunc16_sat16_roundPetar Jovanovic
This change corrects rounding and saturation of Q31 fractional value in mipsdsp_trunc16_sat16_round(). Overflow detection was incorrect for the corner case for PRECRQ_RS.PH, and this test case is also part of the change. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28target-mips: fix branch in likely delay slot tcg assertJames Hogan
When a branch delay slot contains another branch instruction, the code generated raises an exception, however since is_branch==1, handle_delay_slot() doesn't get called immediately. This means ctx->bstate isn't set to BS_BRANCH, and the decoder continues decoding until a non-branch instruction is found. If the first branch was a branch likely instruction then each instruction after it generates code for the unlikely case, to go to the next tb starting after the delay slot. This results in multiple goto_tb tcg ops being generated with the same exit number. When debug is enabled this hits: tcg-op.h:2589: tcg_gen_goto_tb: Assertion `(tcg_ctx.goto_tb_issue_mask & (1 << idx)) == 0' failed. This is fixed by removing is_branch entirely, and calling handle_delay_slot() if (ctx.hflags & MIPS_HFLAG_BMASK) was set prior to the current instruction being decoded. This still prevents handle_delay_slot() being called immediately after a branch but allows it to still be called after a branch within a delay slot. Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-28target-mips: fix multiplication in mipsdsp_rndq15_mul_q15_q15Petar Jovanovic
Multiplication of Q15 fractional halfword vectors was incorrect in the previous implementation of mipsdsp_rndq15_mul_q15_q15. It failed to take element signs into account. This change fixes it, and it adds a test case for it. The change also removes unnecessary cast in the function mipsdsp_mul_q15_q15_overflowflag21(). Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-27cpu: Introduce CPUClass::gdb_{read,write}_register()Andreas Färber
Completes migration of target-specific code to new target-*/gdbstub.c. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-27gdbstub: Replace GET_REG*() macros with gdb_get_reg*() functionsAndreas Färber
This avoids polluting the global namespace with a non-prefixed macro and makes it obvious in the call sites that we return. Semi-automatic conversion using, e.g., sed -i 's/GET_REGL(/return gdb_get_regl(mem_buf, /g' target-*/gdbstub.c followed by manual tweaking for sparc's GET_REGA() and Coding Style. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26target-mips: Move cpu_gdb_{read,write}_register()Andreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-26cpu: Introduce CPUState::gdb_num_regs and CPUClass::gdb_num_core_regsAndreas Färber
CPUState::gdb_num_regs replaces num_g_regs. CPUClass::gdb_num_core_regs replaces NUM_CORE_REGS. Allows building gdb_register_coprocessor() for xtensa, too. As a side effect this should fix coprocessor register numbering for SMP. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Move singlestep_enabled field from CPU_COMMON to CPUStateAndreas Färber
Prepares for changing cpu_single_step() argument to CPUState. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Introduce CPUClass::synchronize_from_tb() for cpu_pc_from_tb()Andreas Färber
Where no extra implementation is needed, fall back to CPUClass::set_pc(). Acked-by: Michael Walle <michael@walle.cc> (for lm32) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-23cpu: Introduce CPUClass::set_pc() for gdb_set_cpu_pc()Andreas Färber
This moves setting the Program Counter from gdbstub into target code. Use vaddr type as upper-bound replacement for target_ulong. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Move reset logging to CPUStateAndreas Färber
x86 was using additional CPU_DUMP_* flags, so make that configurable in CPUClass::reset_dump_flags. This adds reset logging for alpha, unicore32 and xtensa. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09target-mips: Change gen_intermediate_code_internal() argument to MIPSCPUAndreas Färber
Also use bool type while at it. Prepares for moving singlestep_enabled field to CPUState. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Make first_cpu and next_cpu CPUStateAndreas Färber
Move next_cpu from CPU_COMMON to CPUState. Move first_cpu variable to qom/cpu.h. gdbstub needs to use CPUState::env_ptr for now. cpu_copy() no longer needs to save and restore cpu_next. Acked-by: Paolo Bonzini <pbonzini@redhat.com> [AF: Rebased, simplified cpu_copy()] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09cpu: Drop unnecessary dynamic casts in *_env_get_cpu()Andreas Färber
A transition from CPUFooState to FooCPU can be considered safe, just like FooCPU::env access in the opposite direction. The only benefit of the FOO_CPU() casts would be protection against bogus CPUFooState pointers, but then surrounding code would likely break, too. This should slightly improve interrupt etc. performance when going from CPUFooState to FooCPU. For any additional CPU() casts see 3556c233d931ad5ffa46a35cb25cfc057732ebb8 (qom: allow turning cast debugging off). Reported-by: Anthony Liguori <aliguori@us.ibm.com> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09linux-user: Move cpu_clone_regs() and cpu_set_tls() into linux-userPeter Maydell
The functions cpu_clone_regs() and cpu_set_tls() are not purely CPU related -- they are specific to the TLS ABI for a a particular OS. Move them into the linux-user/ tree where they belong. target-lm32 had entirely unused implementations, since it has no linux-user target; just drop them. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Turn cpu_unassigned_access() into a CPUState hookAndreas Färber
Use it for all targets, but be careful not to pass invalid CPUState. cpu_single_env can be NULL, e.g. on Xen. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-28cpu: Change qemu_init_vcpu() argument to CPUStateAndreas Färber
This allows to move the call into CPUState's realizefn. Therefore move the stub into libqemustub.a. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Andreas Färber <afaerber@suse.de>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 16:13:12 +0000