aboutsummaryrefslogtreecommitdiff
path: root/target-mips
AgeCommit message (Collapse)Author
2015-06-12target-mips: enable XPA and LPA featuresLeon Alrae
Enable XPA in MIPS32R5-generic and LPA in MIPS64R6-generic. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: remove misleading comments in translate_init.cLeon Alrae
PABITS are not hardcoded to 36 bits and we do not model 59 PABITS (which is the architectural limit) in QEMU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: add MTHC0 and MFHC0 instructionsLeon Alrae
Implement MTHC0 and MFHC0 instructions. In MIPS32 they are used to access upper word of extended to 64-bits CP0 registers. In MIPS64, when CP0 destination register specified is the EntryLo0 or EntryLo1, bits 1:0 of the GPR appear at bits 31:30 of EntryLo0 or EntryLo1. This is to compensate for RI and XI, which were shifted to bits 63:62 by MTC0 to EntryLo0 or EntryLo1. Therefore creating separate functions for EntryLo0 and EntryLo1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: add CP0.PageGrain.ELPA supportLeon Alrae
CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: support Page Frame Number Extension fieldLeon Alrae
Update tlb->PFN to contain PFN concatenated with PFNX. PFNX is 0 if large physical address is not supported. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: extend selected CP0 registers to 64-bits in MIPS32Leon Alrae
Extend EntryLo0, EntryLo1, LLAddr and TagLo from 32 to 64 bits in MIPS32. Introduce gen_move_low32() function which moves low 32 bits from 64-bit temp to GPR; it sign extends 32-bit value on MIPS64 and truncates on MIPS32. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: correct MFC0 for CP0.EntryLo in MIPS64Leon Alrae
CP0.EntryLo bits 31:30 have to be cleared. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-11target-mips: add ERETNC instruction and Config5.LLB bitLeon Alrae
ERETNC is identical to ERET except that an ERETNC will not clear the LLbit that is set by execution of an LL instruction, and thus when placed between an LL and SC sequence, will never cause the SC to fail. Presence of ERETNC is denoted by the Config5.LLB. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-11target-mips: Misaligned memory accesses for MSAYongbok Kim
MIPS SIMD Architecture vector loads and stores require misalignment support. MSA Memory access should work as an atomic operation. Therefore, it has to check validity of all addresses for a vector store access if it is spanning into two pages. Separating helper functions for each data format as format is known in translation. To use mmu_idx from cpu_mmu_index() instead of calculating it from hflag. Removing save_cpu_state() call in translation because it is able to use cpu_restore_state() on fault as GETRA() is passed. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: remove unused do_* functions] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11target-mips: Misaligned memory accesses for R6Yongbok Kim
Release 6 requires misaligned memory access support for all ordinary memory access instructions (for example, LW/SW, LWC1/SWC1). However misaligned support is not provided for certain special memory accesses such as atomics (for example, LL/SC). Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11target-mips: add Config5.FRE support allowing Status.FR=0 emulationLeon Alrae
This relatively small architectural feature adds the following: FIR.FREP: Read-only. If FREP=1, then Config5.FRE and Config5.UFE are available. Config5.FRE: When enabled all single-precision FP arithmetic instructions, LWC1/LWXC1/MTC1, SWC1/SWXC1/MFC1 cause a Reserved Instructions exception. Config5.UFE: Allows user to write/read Config5.FRE using CTC1/CFC1 instructions. Enable the feature in MIPS64R6-generic CPU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-11target-mips: move group of functions above gen_load_fpr32()Leon Alrae
Move the "Tests" group of functions so that gen_load_fpr32() and gen_store_fpr32() can use generate_exception(). Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-02kvm: introduce kvm_arch_msi_data_to_gsiEric Auger
On ARM the MSI data corresponds to the shared peripheral interrupt (SPI) ID. This latter equals to the SPI index + 32. to retrieve the SPI index, matching the gsi, an architecture specific function is introduced. Signed-off-by: Eric Auger <eric.auger@linaro.org> Acked-by: Christoffer Dall <christoffer.dall@linaro.org> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-04-30kvm: add support for memory transaction attributesPaolo Bonzini
Let kvm_arch_post_run convert fields in the kvm_run struct to MemTxAttrs. These are then passed to address_space_rw. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-19Merge remote-tracking branch ↵Peter Maydell
'remotes/mjt/tags/pull-trivial-patches-2015-03-19' into staging trivial patches for 2015-03-19 # gpg: Signature made Thu Mar 19 08:57:54 2015 GMT using RSA key ID A4C3D7DB # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" # gpg: aka "Michael Tokarev <mjt@corpit.ru>" # gpg: aka "Michael Tokarev <mjt@debian.org>" * remotes/mjt/tags/pull-trivial-patches-2015-03-19: (24 commits) qga/commands-posix: Fix resource leak elf-loader: Add missing error handling for call of lseek elf-loader: Fix truncation warning from coverity hmp: Fix texinfo documentation Fix typos in comments qtest/ahci: Fix a bit mask expression vl: fix resource leak with monitor_fdset_add_fd smbios: add max speed comdline option for type-17 (meory device) structure pc-dimm: Add description for device list. configure: enable kvm on x32 error: Replace error_report() & error_free() with error_report_err() arm: fix memory leak qmp: Drop unused .user_print from command definitions hmp: Fix definition of command quit target-moxie: Fix warnings from Sparse (one-bit signed bitfield) block/qapi: Fix Sparse warning Fix remaining warnings from Sparse (void return) qom: Fix warning from Sparse target-mips: Fix warning from Sparse arm/nseries: Fix warnings from Sparse ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-19target-mips: Fix warning from SparseStefan Weil
Sparse report: target-mips/dsp_helper.c:3681:5: warning: returning void-valued expression Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-03-18target-mips: save cpu state before calling MSA load and store helpersLeon Alrae
PC needs to be saved if an exception can be generated by an helper. This fixes a problem related to resuming the execution at unexpected address after an exception (caused by MSA load/store instruction) has been serviced. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-03-18target-mips: fix hflags modified in delay / forbidden slotLeon Alrae
All instructions which may change hflags terminate tb. However, this doesn't work if such an instruction is placed in delay or forbidden slot. gen_branch() clears MIPS_HFLAG_BMASK in ctx->hflags and then generates code to overwrite hflags with ctx->hflags, consequently we loose any execution-time hflags modifications. For example, in the following scenario hflag related to Status.CU1 will not be updated: /* Set Status.CU1 in delay slot */ mfc0 $24, $12, 0 lui $25, 0x2000 or $25, $25, $24 b check_Status_CU1 mtc0 $25, $12, 0 With this change we clear MIPS_HFLAG_BMASK in execution-time hflags if instruction in delay or forbidden slot wants to terminate tb for some reason (i.e. ctx->bstate != BS_NONE). Also, die early and loudly if "unknown branch" is encountered as this should never happen. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-03-18target-mips: fix CP0.BadVAddr by stopping translation on Address ErrorLeon Alrae
CP0.BadVAddr is supposed to capture the most recent virtual address that caused the exception. Currently this does not work correctly for unaligned instruction fetch as translation is not stopped and CP0.BadVAddr is updated with subsequent addresses. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-03-13tcg: Change translator-side labels to a pointerRichard Henderson
This is improved type checking for the translators -- it's no longer possible to accidentally swap arguments to the branch functions. Note that the code generating backends still manipulate labels as int. With notable exceptions, the scope of the change is just a few lines for each target, so it's not worth building extra machinery to do this change in per-target increments. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-03-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
misc fixes and cleanups A bunch of fixes all over the place, some of the bugs fixed are actually regressions. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed Mar 11 17:48:30 2015 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (25 commits) virtio-scsi: remove empty wrapper for cmd virtio-scsi: clean out duplicate cdb field virtio-scsi: fix cdb/sense size uapi/virtio_scsi: allow overriding CDB/SENSE size virtio-scsi: drop duplicate CDB/SENSE SIZE exec: don't include hw/boards for linux-user acpi: specify format for build_append_namestring MAINTAINERS: drop aliguori@amazon.com tpm: Move memory subregion function into realize function virtio-pci: Convert to realize() pci: Convert pci_nic_init() to Error to avoid qdev_init() machine: query mem-merge machine property machine: query dump-guest-core machine property hw/boards: make it safe to include for linux-user machine: query phandle-start machine property machine: query kvm-shadow-mem machine property kvm: add machine state to kvm_arch_init machine: query kernel-irqchip property machine: allowed/required kernel-irqchip support machine: replace qemu opts with iommu property ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11Merge remote-tracking branch 'remotes/lalrae/tags/mips-20150311' into stagingPeter Maydell
MIPS patches 2015-03-11 Changes: * use VMStateDescription for MIPS CPU # gpg: Signature made Wed Mar 11 15:01:52 2015 GMT using RSA key ID 0B29DA6B # gpg: Can't check signature: public key not found * remotes/lalrae/tags/mips-20150311: target-mips: add missing MSACSR and restore fp_status and hflags target-mips: replace cpu_save/cpu_load with VMStateDescription Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-03-11kvm: add machine state to kvm_arch_initMarcel Apfelbaum
Needed to query machine's properties. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2015-03-11target-mips: add missing MSACSR and restore fp_status and hflagsLeon Alrae
Save MSACSR state. Also remove fp_status, msa_fp_status, hflags and restore them in post_load() from the architectural registers. Float exception flags are not present in vmstate. Information they carry is used only by softfloat caller who translates them into MIPS FCSR.Cause, FCSR.Flags and then they are cleared. Therefore there is no need for saving them in vmstate. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-03-11target-mips: replace cpu_save/cpu_load with VMStateDescriptionLeon Alrae
Create VMStateDescription for MIPS CPU. The new structure contains exactly the same fields as before, therefore leaving existing version_id. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-03-10cpu: Make cpu_init() return QOM CPUState objectEduardo Habkost
Instead of making cpu_init() return CPUArchState, return CPUState. Changes were made using the Coccinelle semantic patch below. @@ typedef CPUState; identifier e; expression args; type CPUArchState; @@ - e = + cpu = cpu_init(args); - if (!e) { + if (!cpu) { ... } - cpu = ENV_GET_CPU(env); + e = cpu->env_ptr; @@ identifier new_env, new_cpu, env, cpu; type CPUArchState; expression args; @@ -{ - CPUState *cpu = ENV_GET_CPU(env); - CPUArchState *new_env = cpu_init(args); - CPUState *new_cpu = ENV_GET_CPU(new_env); +{ + CPUState *cpu = ENV_GET_CPU(env); + CPUState *new_cpu = cpu_init(args); + CPUArchState *new_env = new_cpu->env_ptr; ... } @@ identifier c, cpu_init_func, cpu_model; type StateType, CPUType; @@ -static inline StateType* cpu_init(const char *cpu_model) -{ - CPUType *c = cpu_init_func(cpu_model); ( - if (c == NULL) { - return NULL; - } - return &c->env; | - if (c) { - return &c->env; - } - return NULL; ) -} +#define cpu_init(cpu_model) CPU(cpu_init_func(cpu_model)) @@ identifier cpu_init_func; identifier model; @@ -#define cpu_init(model) (&cpu_init_func(model)->env) +#define cpu_init(model) CPU(cpu_init_func(model)) Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Riku Voipio <riku.voipio@iki.fi> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Max Filippov <jcmvbkbc@gmail.com> [AF: Fixed up cpu_copy() manually] Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-02-13target-mips: pass 0 instead of -1 as rs in microMIPS LUI instructionLeon Alrae
Using rs = -1 in gen_logic_imm() for microMIPS LUI instruction is dangerous and may bite us when implementing microMIPS R6 because in R6 AUI and LUI are distinguished by rs value. Therefore use 0 for safety. Reported-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13target-mips: fix broken snapshottingLeon Alrae
Recently added CP0.BadInstr and CP0.BadInstrP registers ended up in cpu_load() under different offset than in cpu_save(). These and all registers between were incorrectly restored. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13target-mips: use CP0EnLo_XI instead of magic numberLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
2015-02-13target-mips: ll and lld cause AdEL exception for unaligned addressLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org>
2015-02-13target-mips: fix detection of the end of the page during translationLeon Alrae
The test is supposed to terminate TB if the end of the page is reached. However, with current implementation it may never succeed for microMIPS or mips16. Reported-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Maciej W. Rozycki <macro@linux-mips.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-02-13target-mips: Make CP0.Status.CU1 read-only for the 5Kc and 5KEc processorsMaciej W. Rozycki
Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-12tcg: Introduce tcg_op_buf_count and tcg_op_buf_fullRichard Henderson
The method by which we count the number of ops emitted is going to change. Abstract that away into some inlines. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-12tcg: Move emit of INDEX_op_end into gen_tb_endRichard Henderson
Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-02-10target-mips: Clean up switch fall through after commit fecd264Markus Armbruster
Commit fecd264 added a number of fall-throughs, but neglected to properly document them as intentional. Commit d922445 cleaned that up for many, but not all cases. Take care of the remaining ones. Spotted by Coverity. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-02-06softfloat: expand out STATUS_VARPeter Maydell
Expand out and remove the STATUS_VAR macro. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-02-06softfloat: Expand out the STATUS_PARAM macroPeter Maydell
Expand out STATUS_PARAM wherever it is used and delete the definition. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-01-20target-mips: Don't use _raw load/store accessorsPeter Maydell
Use cpu_*_data instead of the direct *_raw load/store accessors. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1421334118-3287-9-git-send-email-peter.maydell@linaro.org
2015-01-20exec.c: Drop TARGET_HAS_ICE define and checksPeter Maydell
The TARGET_HAS_ICE #define is intended to indicate whether a target-* guest CPU implementation supports the breakpoint handling. However, all our guest CPUs have that support (the only two which do not define TARGET_HAS_ICE are unicore32 and openrisc, and in both those cases the bp support is present and the lack of the #define is just a bug). So remove the #define entirely: all new guest CPU support should include breakpoint handling as part of the basic implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1420484960-32365-1-git-send-email-peter.maydell@linaro.org
2015-01-12kvm: extend kvm_irqchip_add_msi_route to work on s390Frank Blaschka
on s390 MSI-X irqs are presented as thin or adapter interrupts for this we have to reorganize the routing entry to contain valid information for the adapter interrupt code on s390. To minimize impact on existing code we introduce an architecture function to fixup the routing entry. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2015-01-03gen-icount: check cflags instead of use_icount globalPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-01-03translate: check cflags instead of use_icount globalPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-12-17Merge remote-tracking branch 'remotes/lalrae/tags/mips-20141216' into stagingPeter Maydell
* remotes/lalrae/tags/mips-20141216: (30 commits) target-mips: remove excp_names[] from linux-user as it is unused disas/mips: disable unused mips16_to_32_reg_map[] disas/mips: remove unused mips_msa_control_names_numeric[32] target-mips: convert single case switch into if statement target-mips: Fix DisasContext's ulri member initialization target-mips: Use local float status pointer across MSA macros target-mips: Add missing calls to synchronise SoftFloat status linux-user: Use the 5KEf processor for 64-bit emulation target-mips: Also apply the CP0.Status mask to MTTC0 target-mips: gdbstub: Clean up FPU register handling target-mips: Correct 32-bit address space wrapping target-mips: Tighten ISA level checks target-mips: Fix CP0.Config3.ISAOnExc write accesses target-mips: Output CP0.Config2-5 in the register dump target-mips: Fix the 64-bit case for microMIPS MOVE16 and MOVEP target-mips: Correct the writes to Status and Cause registers via gdbstub target-mips: Correct the handling of writes to CP0.Status for MIPSr6 target-mips: Correct MIPS16/microMIPS branch size calculation target-mips: Restore the order of helpers target-mips: Remove unused `FLOAT_OP' macro ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16qemu-log: add log category for MMU infoAntony Pavlov
Running barebox on qemu-system-mips* with '-d unimp' overloads stderr by very very many mips_cpu_handle_mmu_fault() messages: mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3 mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3 mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0 So it's very difficult to find LOG_UNIMP message. The mips_cpu_handle_mmu_fault() messages appear on enabling ANY logging! It's not very handy. Adding separate log category for *_cpu_handle_mmu_fault() logging fixes the problem. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16target-mips: remove excp_names[] from linux-user as it is unusedLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16target-mips: convert single case switch into if statementLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16target-mips: Fix DisasContext's ulri member initializationMaciej W. Rozycki
Set DisasContext's ulri member to 0 or 1 as with other bool members. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16target-mips: Use local float status pointer across MSA macrosMaciej W. Rozycki
Reduce line wrapping throughout MSA helper macros by using a local float status pointer rather than referring to the float status through the environment each time. No functional change. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16target-mips: Add missing calls to synchronise SoftFloat statusMaciej W. Rozycki
Add missing calls to synchronise the SoftFloat status with the CP1.FSCR: + for the rounding and flush-to-zero modes upon processor reset, + for the flush-to-zero mode on FSCR updates through the GDB stub. Refactor code accordingly and remove the redundant RESTORE_ROUNDING_MODE macro. Signed-off-by: Thomas Schwinge <thomas@codesourcery.com> Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-16target-mips: Also apply the CP0.Status mask to MTTC0Maciej W. Rozycki
Make CP0.Status writes made with the MTTC0 instruction respect this register's mask just like all the other places. Also preserve the current values of masked out bits. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 13:24:52 +0000