aboutsummaryrefslogtreecommitdiff
path: root/target-mips
AgeCommit message (Collapse)Author
2014-11-07target-mips: fix multiple TCG registers covering same dataYongbok Kim
Avoid to allocate different TCG registers for the FPU registers that are mapped on the MSA vectore registers. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07mips: Ensure PC update with MTC0 single-steppingMaciej W. Rozycki
Correct the way PC is updated when single-stepping instructions, by keeping the old PC only for the BS_EXCP (exception condition) state. Some MTC0 (and possibly other) instructions switch to the BS_STOP state to terminate the current translation block, so that the state transition of the simulated CPU resulting from the CP0 operation takes effect with the following instruction. This happens with `mtc0 <reg>,c0_config' for example, typically used to set KSEG0 cacheability. While single-stepping this has a side-effect of not advancing the PC past the instruction just executed; subsequent single-step traps will stop at the same instruction repeatedly. Example: (gdb) stepi 0x80004d24 in _start () 5: x/i $pc => 0x80004d24 <_start+364>: mfc0 t1,c0_config (gdb) 0x80004d28 in _start () 5: x/i $pc => 0x80004d28 <_start+368>: li at,-8 (gdb) 0x80004d2c in _start () 5: x/i $pc => 0x80004d2c <_start+372>: and t1,t1,at (gdb) 0x80004d30 in _start () 5: x/i $pc => 0x80004d30 <_start+376>: ori t1,t1,0x3 (gdb) 0x80004d34 in _start () 5: x/i $pc => 0x80004d34 <_start+380>: mtc0 t1,c0_config (gdb) 0x80004d34 in _start () 5: x/i $pc => 0x80004d34 <_start+380>: mtc0 t1,c0_config (gdb) 0x80004d34 in _start () 5: x/i $pc => 0x80004d34 <_start+380>: mtc0 t1,c0_config (gdb) 0x80004d34 in _start () 5: x/i $pc => 0x80004d34 <_start+380>: mtc0 t1,c0_config (gdb) -- oops! Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07target-mips: fix for missing delay slot in BC1EQZ and BC1NEZLeon Alrae
New R6 COP1 conditional branches currently don't have delay slot. Fixing this by setting MIPS_HFLAG_BDS32 flag which is required for branches having 4-byte delay slot. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-07mips: Set the CP0.Config3.DSP and CP0.Config3.DSP2P bitsMaciej W. Rozycki
Set the CP0.Config3.DSP2P bit for the 74kf processor and both that bit and the CP0.Config3.DSP bit for the artificial mips32r5-generic and mips64dspr2 processors. They have the DSPr2 ASE enabled in `insn_flags' and CPUs that implement that ASE need to have both CP0.Config3.DSP and CP0.Config3.DSP2P set or software won't detect its presence. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: remove DSP flags from mips32r5-generic] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07mips: Add macros for CP0.Config3 and CP0.Config4 bitsMaciej W. Rozycki
Define macros for CP0.Config3 and CP0.Config4 bits. These used to be exhaustive as at MIPS32r3, but more bits may have been added since. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-07mips: Respect CP0.Status.CU1 for microMIPS FP branchesMaciej W. Rozycki
Make microMIPS FP branches respect CP0.Status.CU1 and trap with a Coprocessor Unusable exception if COP1 has been disabled; also trap if no FPU is present at all. Standard MIPS FP instruction encodings have a more regular structure and branches are covered with a single umbrella along other instructions. This is not the case with the microMIPS encoding, this case has to be taken care of explicitly here. Code to do so has been copied from the standard MIPS code handler for OPC_CP1, in `decode_opc'. Problems arising from this bug will generally only show up on user context switches in operating systems making use of lazy FP context switches, such as Linux. It will also more readily trigger if software FPU emulation is used, either implicitly on a non-float CPU, or forced on a hard-float CPU such as with the "nofpu" Linux kernel command line argument. The problem may have been easily missed because we have no hard-float microMIPS CPU configuration present; in fact we have no microMIPS CPU configuration of any kind present. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA support to mips32r5-genericYongbok Kim
add MSA support to mips32r5-generic core definition Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA MI10 format instructionsYongbok Kim
add MSA MI10 format instructions update LSA and DLSA for MSA add 16, 64 bit load and store Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA 2RF format instructionsYongbok Kim
add MSA 2RF format instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA VEC/2R format instructionsYongbok Kim
add MSA VEC/2R format instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA 3RF format instructionsYongbok Kim
add MSA 3RF format instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA ELM format instructionsYongbok Kim
add MSA ELM format instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA 3R format instructionsYongbok Kim
add MSA 3R format instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA BIT format instructionsYongbok Kim
add MSA BIT format instructions Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA I5 format instructionYongbok Kim
add MSA I5 format instructions Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA I8 format instructionsYongbok Kim
add MSA I8 format instructions Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA branch instructionsYongbok Kim
add MSA branch instructions Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add msa_helper.cYongbok Kim
add msa_helper.c Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add msa_reset(), global msa registerYongbok Kim
add msa_reset() and global msa register (d type only) Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA opcode enumYongbok Kim
add MSA opcode enum Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: stop translation after ctc1Yongbok Kim
stop translation as ctc1 instruction can change hflags Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: remove duplicated mips/ieee mapping functionYongbok Kim
Remove the duplicated ieee_rm in gdbstub.c. Make the other ieee_rm and ieee_ex_to_mips available to other files. Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA exceptionsYongbok Kim
add MSA exceptions Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA defines and data structureYongbok Kim
add defines and data structure for MIPS SIMD Architecture Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: enable features in MIPS64R6-generic CPULeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: correctly handle access to unimplemented CP0 registerLeon Alrae
Release 6 limits the number of cases where software can cause UNDEFINED or UNPREDICTABLE behaviour. In this case, when accessing reserved / unimplemented CP0 register, writes are ignored and reads return 0. In pre-R6 the behaviour is not specified, but generating RI exception is not what the real HW does. Additionally, remove CP0 Random register as it became reserved in Release 6. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add restrictions for possible values in registersLeon Alrae
In Release 6 not all the values are allowed to be written to a register. If the value is not valid or unsupported then it should stay unchanged. For pre-R6 the existing behaviour has been changed only for CP0_Index register as the current implementation does not seem to be correct - it looks like it tries to limit the input value but the limit is higher than the actual number of tlb entries. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: CP0_Status.CU0 no longer allows the user to access CP0Leon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: implement forbidden slotLeon Alrae
When conditional compact branch is encountered decode one more instruction in current translation block - that will be forbidden slot. Instruction in forbidden slot will be executed only if conditional compact branch is not taken. Any control transfer instruction (CTI) which are branches, jumps, ERET, DERET, WAIT and PAUSE will generate RI exception if executed in forbidden or delay slot. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add Config5.SBRILeon Alrae
SDBBP instruction Reserved Instruction control. The purpose of this field is to restrict availability of SDBBP to kernel mode operation. If the bit is set then SDBBP instruction can only be executed in kernel mode. User execution of SDBBP will cause a Reserved Instruction exception. Additionally add missing Config4 and Config5 cases for dm{f,t}c0. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: update cpu_save/cpu_load to support new registersLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add BadInstr and BadInstrP supportLeon Alrae
BadInstr Register (CP0 Register 8, Select 1) The BadInstr register is a read-only register that capture the most recent instruction which caused an exception. BadInstrP Register (CP0 Register 8, Select 2) The BadInstrP register contains the prior branch instruction, when the faulting instruction is in a branch delay slot. Using error_code to indicate whether AdEL or TLBL was triggered during instruction fetch, in this case BadInstr is not updated as valid instruction word is not available. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add TLBINV supportLeon Alrae
For Standard TLB configuration (Config.MT=1): TLBINV invalidates a set of TLB entries based on ASID. The virtual address is ignored in the entry match. TLB entries which have their G bit set to 1 are not modified. TLBINVF causes all entries to be invalidated. Single TLB entry can be marked as invalid on TLB entry write by having EntryHi.EHINV set to 1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add new Read-Inhibit and Execute-Inhibit exceptionsLeon Alrae
An Execute-Inhibit exception occurs when the virtual address of an instruction fetch matches a TLB entry whose XI bit is set. This exception type can only occur if the XI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain XIE bit. An Read-Inhibit exception occurs when the virtual address of a memory load reference matches a TLB entry whose RI bit is set. This exception type can only occur if the RI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain RIE bit. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: update PageGrain and m{t,f}c0 EntryLo{0,1}Leon Alrae
PageGrain needs rw bitmask which differs between MIPS architectures. In pre-R6 if RIXI is supported, PageGrain.XIE and PageGrain.RIE are writeable, whereas in R6 they are read-only 1. On MIPS64 mtc0 instruction left shifts bits 31:30 for MIPS32 backward compatiblity, therefore there are separate mtc0 and dmtc0 helpers. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add RI and XI fields to TLB entryLeon Alrae
In Revision 3 of the architecture, the RI and XI bits were added to the TLB to enable more secure access of memory pages. These bits (along with the Dirty bit) allow the implementation of read-only, write-only, no-execute access policies for mapped pages. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: distinguish between data load and instruction fetchLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add KScratch registersLeon Alrae
KScratch<n> Registers (CP0 Register 31, Selects 2 to 7) The KScratch registers are read/write registers available for scratch pad storage by kernel mode software. They are 32-bits in width for 32-bit processors and 64-bits for 64-bit processors. CP0Config4.KScrExist[2:7] bits indicate presence of CP0_KScratch1-6 registers. For Release 6, all KScratch registers are required. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-24target-mips: add ULL suffix in bitswap to avoid compiler warningLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1413982829-27225-1-git-send-email-leon.alrae@imgtec.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-10-14target-mips: Remove unused gen_load_ACX, gen_store_ACX and cpu_ACXPeter Maydell
Remove the functions gen_load_ACX and gen_store_ACX, which appear to have been unused since they were first introduced many years ago. These functions were the only places using the cpu_ACX[] array of TCG globals, so remove that and its accompanying regnames_ACX[] as well. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/dsp_helper.c: Add ifdef guards around various functionsPeter Maydell
Add ifdef TARGET_MIPS64 guards around various functions that are only called from helpers for TARGET_MIPS64 CPUs; this avoids compiler warnings when building other configs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/translate.c: Add ifdef guard around check_mips64()Peter Maydell
The function check_mips64() is only used if TARGET_MIPS64 is defined; add an ifdef guard to its definition to avoid warnings about it being unused in other configurations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/op_helper.c: Remove unused do_lbu() functionPeter Maydell
The do_lbu() function defined by the expansion of HELPER_LD() is never used, so don't define it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/dsp_helper.c: Remove unused function get_DSPControl_24()Peter Maydell
The function get_DSPControl_24() is unused; remove it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips: fix broken MIPS16 and microMIPSYongbok Kim
Commit 240ce26a broke MIPS16 and microMIPS support as it didn't care those branches and jumps don't have delay slot in MIPS16 and microMIPS. This patch introduces a new argument delayslot_size to the gen_compute_branch() indicating size of delay slot {0, 2, 4}. And the information is used to call handle_delay_slot() forcingly when no delay slot is required. There are some microMIPS branch and jump instructions that requires exact size of instruction in the delay slot. For indicating these instructions, MIPS_HFLAG_BDS_STRICT flag is introduced. Those fictional branch opcodes defined to support MIPS16 and microMIPS are no longer needed. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Tested-by: Jonas Gorski <jogo@openwrt.org> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: cosmetic changes] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips/translate.c: Update OPC_SYNCIDongxue Zhang
Update OPC_SYNCI with BS_STOP, in order to handle the instructions which saved in the same TB of the store instruction. Signed-off-by: Dongxue Zhang <elta.era@gmail.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com> [leon.alrae@imgtec.com: update microMIPS SYNCI as well] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-10-14target-mips: define a new generic CPU supporting MIPS64 Release 6 ISALeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14target-mips: remove JR, BLTZAL, BGEZAL and add NAL, BAL instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2014-10-14target-mips: do not allow Status.FR=0 mode in 64-bit FPULeon Alrae
Status.FR bit must be ignored on write and read as 1 when an implementation of Release 6 of the Architecture in which a 64-bit floating point unit is implemented. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-10-14target-mips: add new Floating Point Comparison instructionsYongbok Kim
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-29 02:55:09 +0000