aboutsummaryrefslogtreecommitdiff
path: root/target-mips/machine.c
AgeCommit message (Collapse)Author
2016-01-23mips: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-28target-mips: fix passing incompatible pointer type in machine.cLeon Alrae
Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-06-12target-mips: add CP0.PageGrain.ELPA supportLeon Alrae
CP0.PageGrain.ELPA enables support for large physical addresses. This field is encoded as follows: 0: Large physical address support is disabled. 1: Large physical address support is enabled. If this bit is a 1, the following changes occur to coprocessor 0 registers: - The PFNX field of the EntryLo0 and EntryLo1 registers is writable and concatenated with the PFN field to form the full page frame number. - Access to optional COP0 registers with PA extension, LLAddr, TagLo is defined. P5600 can operate in 32-bit or 40-bit Physical Address Mode. Therefore if XPA is disabled (CP0.PageGrain.ELPA = 0) then assume 32-bit Address Mode. In MIPS64 assume 36 as default PABITS (when CP0.PageGrain.ELPA = 0). env->PABITS value is constant and indicates maximum PABITS available on a core, whereas env->PAMask is calculated from env->PABITS and is also affected by CP0.PageGrain.ELPA. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-06-12target-mips: extend selected CP0 registers to 64-bits in MIPS32Leon Alrae
Extend EntryLo0, EntryLo1, LLAddr and TagLo from 32 to 64 bits in MIPS32. Introduce gen_move_low32() function which moves low 32 bits from 64-bit temp to GPR; it sign extends 32-bit value on MIPS64 and truncates on MIPS32. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
2015-03-11target-mips: add missing MSACSR and restore fp_status and hflagsLeon Alrae
Save MSACSR state. Also remove fp_status, msa_fp_status, hflags and restore them in post_load() from the architectural registers. Float exception flags are not present in vmstate. Information they carry is used only by softfloat caller who translates them into MIPS FCSR.Cause, FCSR.Flags and then they are cleared. Therefore there is no need for saving them in vmstate. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Richard Henderson <rth@twiddle.net>
2015-03-11target-mips: replace cpu_save/cpu_load with VMStateDescriptionLeon Alrae
Create VMStateDescription for MIPS CPU. The new structure contains exactly the same fields as before, therefore leaving existing version_id. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-02-13target-mips: fix broken snapshottingLeon Alrae
Recently added CP0.BadInstr and CP0.BadInstrP registers ended up in cpu_load() under different offset than in cpu_save(). These and all registers between were incorrectly restored. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: update cpu_save/cpu_load to support new registersLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-06-18target-mips: implement UserLocal RegisterPetar Jovanovic
From MIPS documentation (Volume III): UserLocal Register (CP0 Register 4, Select 2) Compliance Level: Recommended. The UserLocal register is a read-write register that is not interpreted by the hardware and conditionally readable via the RDHWR instruction. This register only exists if the Config3-ULRI register field is set. Privileged software may write this register with arbitrary information and make it accessible to unprivileged software via register 29 (ULR) of the RDHWR instruction. To do so, bit 29 of the HWREna register must be set to a 1 to enable unprivileged access to the register. Signed-off-by: Petar Jovanovic <petar.jovanovic@imgtec.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2014-03-13cputlb: Change tlb_flush() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14target-mips: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-02fix spelling in target sub directoryDong Xu Wang
Cc: Richard Henderson <rth@twiddle.net> Cc: Edgar E. Iglesias <edgar.iglesias@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alexander Graf <agraf@suse.de> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-11-22target-mips: rename CP0_LLAddr into lladdrAurelien Jarno
The variable CP0_LLAddr represent the full lladdr, not the actual register value, which is only part of this value and depends on the CPU. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-06-13Fix a warning: uint_fast8_t is not 8 bits on OpenBSD/Sparc64Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-21Convert machine registration to use module init functionsAnthony Liguori
This cleans up quite a lot of #ifdefs, extern variables, and other ugliness. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-03-29target-mips: optimize gen_compute_branch()aurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6936 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-20A first attempt on supporting snapshots for the MIPS target.ths
Signed-off-by: Thiemo Seufer <ths@networkno.de> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6112 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-13Remove unnecessary trailing newlinesblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6000 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-05Change MIPS machine default to Malta.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4851 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-04remove target ifdefs from vl.caurel32
(Glauber Costa) git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4327 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 12:16:15 +0000