aboutsummaryrefslogtreecommitdiff
path: root/target-mips/helper.c
AgeCommit message (Collapse)Author
2016-07-28target-mips: fix EntryHi.EHINV being cleared on TLB exceptionLeon Alrae
While implementing TLB invalidation feature we forgot to modify part of code responsible for updating EntryHi during TLB exception. Consequently EntryHi.EHINV is unexpectedly cleared on the exception. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: change ASID type to hold more than 8 bitsPaul Burton
ASID currently has uint8_t type which is too small since some processors support more than 8 bits ASID. Therefore change its type to uint16_t. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: add ASID mask field and replace magic valuesPaul Burton
Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-07-12target-mips: add exception base to MIPS CPULeon Alrae
Replace hardcoded 0xbfc00000 with exception_base which is initialized with this default address so there is no functional change here. However, it is now exposed and consequently it will be possible to modify it from outside of the CPU. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-05-19cpu: move exec-all.h inclusion out of cpu.hPaolo Bonzini
exec-all.h contains TCG-specific definitions. It is not needed outside TCG-specific files such as translate.c, exec.c or *helper.c. One generic function had snuck into include/exec/exec-all.h; move it to include/qom/cpu.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19mips: move CP0 functions out of cpu.hPaolo Bonzini
These are here for historical reasons: they are needed from both gdbstub.c and op_helper.c, and the latter was compiled with fixed AREG0. It is not needed anymore, so uninline them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19qemu-common: push cpu.h inclusion out of qemu-common.hPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12target-mips: fix call to memset in soft reset codeAurelien Jarno
Recent versions of GCC report the following error when compiling target-mips/helper.c: qemu/target-mips/helper.c:542:9: warning: ‘memset’ used with length equal to number of elements without multiplication by element size [-Wmemset-elt-size] This is indeed correct and due to a wrong usage of sizeof(). Fix that. Cc: Stefan Weil <sw@weilnetz.de> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: qemu-stable@nongnu.org LP: https://bugs.launchpad.net/qemu/+bug/1577841 Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-23mips: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-11-24target-mips: Fix exceptions while UX=0James Hogan
Commit 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit address wrapping") added a new hflag MIPS_HFLAG_AWRAP, which indicates that 64-bit addressing is disallowed in the current mode, so hflag users don't need to worry about the complexities of working that out, for example checking both MIPS_HFLAG_KSU and MIPS_HFLAG_UX. However when exceptions are taken outside of exception level, mips_cpu_do_interrupt() manipulates the env->hflags directly rather than using compute_hflags() to update them, and this code wasn't updated accordingly. As a result, when UX is cleared, MIPS_HFLAG_AWRAP is set, but it doesn't get cleared on entry back into kernel mode due to an exception. Kernel mode then cannot access the 64-bit segments resulting in a nested exception loop. The same applies to errors and debug exceptions. Fix by updating mips_cpu_do_interrupt() to clear the MIPS_HFLAG_WRAP flag when necessary, according to compute_hflags(). Fixes: 01f728857941 ("target-mips: Status.UX/SX/KX enable 32-bit...") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-30target-mips: fix updating XContext on mmu exceptionYongbok Kim
Correct updating XContext.Region field on mmu exceptions. If Config3.CTXTC = 0 then the R field of XContext has to be updated with the value of bits 63..62 of the virtual address upon a TLB exception. Also fixed the below line which overs 80 characters. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-10-29target-mips: move the test for enabled interrupts to a separate functionLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-09-11typofixes - v4Veres Lajos
Signed-off-by: Veres Lajos <vlajos@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-11maint: remove unused include for signal.hDaniel P. Berrange
A number of files were including signal.h but not using any of the functions it provides Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-08-13target-mips: Use CPU_LOG_INT for logging related to interruptsRichard Henderson
There are now no unconditional uses of qemu_log in the subdirectory. Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2015-07-28target-mips: fix offset calculation for InterruptsYongbok Kim
Correct computation of vector offsets for EXCP_EXT_INTERRUPT. For instance, if Cause.IV is 0 the vector offset should be 0x180. Simplify the finding vector number logic for the Vectored Interrupts. Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> [leon.alrae@imgtec.com: cosmetic changes] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-12-17Merge remote-tracking branch 'remotes/lalrae/tags/mips-20141216' into stagingPeter Maydell
* remotes/lalrae/tags/mips-20141216: (30 commits) target-mips: remove excp_names[] from linux-user as it is unused disas/mips: disable unused mips16_to_32_reg_map[] disas/mips: remove unused mips_msa_control_names_numeric[32] target-mips: convert single case switch into if statement target-mips: Fix DisasContext's ulri member initialization target-mips: Use local float status pointer across MSA macros target-mips: Add missing calls to synchronise SoftFloat status linux-user: Use the 5KEf processor for 64-bit emulation target-mips: Also apply the CP0.Status mask to MTTC0 target-mips: gdbstub: Clean up FPU register handling target-mips: Correct 32-bit address space wrapping target-mips: Tighten ISA level checks target-mips: Fix CP0.Config3.ISAOnExc write accesses target-mips: Output CP0.Config2-5 in the register dump target-mips: Fix the 64-bit case for microMIPS MOVE16 and MOVEP target-mips: Correct the writes to Status and Cause registers via gdbstub target-mips: Correct the handling of writes to CP0.Status for MIPSr6 target-mips: Correct MIPS16/microMIPS branch size calculation target-mips: Restore the order of helpers target-mips: Remove unused `FLOAT_OP' macro ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16qemu-log: add log category for MMU infoAntony Pavlov
Running barebox on qemu-system-mips* with '-d unimp' overloads stderr by very very many mips_cpu_handle_mmu_fault() messages: mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3 mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3 mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0 So it's very difficult to find LOG_UNIMP message. The mips_cpu_handle_mmu_fault() messages appear on enabling ANY logging! It's not very handy. Adding separate log category for *_cpu_handle_mmu_fault() logging fixes the problem. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16target-mips: remove excp_names[] from linux-user as it is unusedLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16target-mips: Tighten ISA level checksMaciej W. Rozycki
Tighten ISA level checks down to MIPS II that many of our instructions are missing. Also make sure any 64-bit instruction enables are only applied to 64-bit processors, that is ones that implement at least the MIPS III ISA. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA exceptionsYongbok Kim
add MSA exceptions Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add BadInstr and BadInstrP supportLeon Alrae
BadInstr Register (CP0 Register 8, Select 1) The BadInstr register is a read-only register that capture the most recent instruction which caused an exception. BadInstrP Register (CP0 Register 8, Select 2) The BadInstrP register contains the prior branch instruction, when the faulting instruction is in a branch delay slot. Using error_code to indicate whether AdEL or TLBL was triggered during instruction fetch, in this case BadInstr is not updated as valid instruction word is not available. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add TLBINV supportLeon Alrae
For Standard TLB configuration (Config.MT=1): TLBINV invalidates a set of TLB entries based on ASID. The virtual address is ignored in the entry match. TLB entries which have their G bit set to 1 are not modified. TLBINVF causes all entries to be invalidated. Single TLB entry can be marked as invalid on TLB entry write by having EntryHi.EHINV set to 1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add new Read-Inhibit and Execute-Inhibit exceptionsLeon Alrae
An Execute-Inhibit exception occurs when the virtual address of an instruction fetch matches a TLB entry whose XI bit is set. This exception type can only occur if the XI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain XIE bit. An Read-Inhibit exception occurs when the virtual address of a memory load reference matches a TLB entry whose RI bit is set. This exception type can only occur if the RI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain RIE bit. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add RI and XI fields to TLB entryLeon Alrae
In Revision 3 of the architecture, the RI and XI bits were added to the TLB to enable more secure access of memory pages. These bits (along with the Dirty bit) allow the implementation of read-only, write-only, no-execute access policies for mapped pages. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: distinguish between data load and instruction fetchLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-09-25target-mips: Use cpu_exec_interrupt qom hookRichard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Tested-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1410626734-3804-19-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-18target-mips: get_physical_address: Add KVM awarenessJames Hogan
MIPS KVM trap & emulate mode (which is currently the only supported mode) has to add an extra kseg0/kseg1 at 0x40000000 and an extra kseg2/kseg3 at 0x60000000. Take this into account in get_physical_address() so that debug memory access works. This is done by translating the address to a standard kseg0 or kseg2 address before doing the normal address translation. The real virtual address is still used for TLB lookups. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18target-mips: get_physical_address: Add defines for segment basesJames Hogan
Add preprocessor definitions for 32bit segment bases for use in get_physical_address(). These will also be taken advantage of in the next patch which adds KVM awareness. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-27target-mips: Avoid shifting left into sign bitPeter Maydell
Add U suffix to various places where we shift a 1 left by 31, to avoid undefined behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-13cputlb: Change tlb_set_page() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cputlb: Change tlb_flush_page() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber
Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-28target-mips: fix get_physical_address() #if 0 build errorJames Hogan
In get_physical_address() is a qemu_log() call inside an #if 0 block. When enabled the following build error is hit: target-mips/helper.c In function ‘get_physical_address’: target-mips/helper.c:220:13: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘hwaddr’ [-Werror=format] Fix the *physical (hwaddr) formatting by using "%"HWADDR_PRIx instead of TARGET_FMT_lx. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-20linux-user: Save the correct resume address for MIPS signal handlingKwok Cheung Yeung
The current ISA mode needs to be saved in bit 0 of the resume address. If the current instruction happens to be in a branch delay slot, then the address of the preceding jump instruction should be stored instead. exception_resume_pc already does both of these tasks, so it is made available and reused. MIPS_HFLAG_BMASK in hflags is cleared, otherwise QEMU may treat the first instruction of the signal handler as a delay slot instruction. Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-31target-mips: Add ASE DSP resources access checkJia Liu
Add MIPS ASE DSP resources access check. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-04target-mips: Use cpu_reset() in do_interrupt()Andreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14target-mips: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-14Fix spelling in comments, documentation and messagesStefan Weil
accidently->accidentally annother->another choosen->chosen consideres->considers decriptor->descriptor developement->development paramter->parameter preceed->precede preceeding->preceding priviledge->privilege propogation->propagation substraction->subtraction throught->through upto->up to usefull->useful Fix also grammar in posix-aio-compat.c Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-06mips: Correct VInt vector generationEdgar E. Iglesias
1. The pending need to pass the Status IM gating. 2. The priority is from seven (highest prio) down to zero. QEMU was doing the opposite. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-15target-mips: Fix warning caused by unused local variableAurelien Jarno
Fix compilation with gcc-4.6, based on a patch from Stefan Weil <weil@mail.berlios.de>. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>