aboutsummaryrefslogtreecommitdiff
path: root/target-mips/helper.c
AgeCommit message (Collapse)Author
2014-12-17Merge remote-tracking branch 'remotes/lalrae/tags/mips-20141216' into stagingPeter Maydell
* remotes/lalrae/tags/mips-20141216: (30 commits) target-mips: remove excp_names[] from linux-user as it is unused disas/mips: disable unused mips16_to_32_reg_map[] disas/mips: remove unused mips_msa_control_names_numeric[32] target-mips: convert single case switch into if statement target-mips: Fix DisasContext's ulri member initialization target-mips: Use local float status pointer across MSA macros target-mips: Add missing calls to synchronise SoftFloat status linux-user: Use the 5KEf processor for 64-bit emulation target-mips: Also apply the CP0.Status mask to MTTC0 target-mips: gdbstub: Clean up FPU register handling target-mips: Correct 32-bit address space wrapping target-mips: Tighten ISA level checks target-mips: Fix CP0.Config3.ISAOnExc write accesses target-mips: Output CP0.Config2-5 in the register dump target-mips: Fix the 64-bit case for microMIPS MOVE16 and MOVEP target-mips: Correct the writes to Status and Cause registers via gdbstub target-mips: Correct the handling of writes to CP0.Status for MIPSr6 target-mips: Correct MIPS16/microMIPS branch size calculation target-mips: Restore the order of helpers target-mips: Remove unused `FLOAT_OP' macro ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16qemu-log: add log category for MMU infoAntony Pavlov
Running barebox on qemu-system-mips* with '-d unimp' overloads stderr by very very many mips_cpu_handle_mmu_fault() messages: mips_cpu_handle_mmu_fault address=b80003fd ret 0 physical 00000000180003fd prot 3 mips_cpu_handle_mmu_fault address=a0800884 ret 0 physical 0000000000800884 prot 3 mips_cpu_handle_mmu_fault pc a080cd80 ad b80003fd rw 0 mmu_idx 0 So it's very difficult to find LOG_UNIMP message. The mips_cpu_handle_mmu_fault() messages appear on enabling ANY logging! It's not very handy. Adding separate log category for *_cpu_handle_mmu_fault() logging fixes the problem. Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com> Acked-by: Alexander Graf <agraf@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1418489298-1184-1-git-send-email-antonynpavlov@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16target-mips: remove excp_names[] from linux-user as it is unusedLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2014-12-16target-mips: Tighten ISA level checksMaciej W. Rozycki
Tighten ISA level checks down to MIPS II that many of our instructions are missing. Also make sure any 64-bit instruction enables are only applied to 64-bit processors, that is ones that implement at least the MIPS III ISA. Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add MSA exceptionsYongbok Kim
add MSA exceptions Reviewed-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2014-11-03target-mips: add BadInstr and BadInstrP supportLeon Alrae
BadInstr Register (CP0 Register 8, Select 1) The BadInstr register is a read-only register that capture the most recent instruction which caused an exception. BadInstrP Register (CP0 Register 8, Select 2) The BadInstrP register contains the prior branch instruction, when the faulting instruction is in a branch delay slot. Using error_code to indicate whether AdEL or TLBL was triggered during instruction fetch, in this case BadInstr is not updated as valid instruction word is not available. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add TLBINV supportLeon Alrae
For Standard TLB configuration (Config.MT=1): TLBINV invalidates a set of TLB entries based on ASID. The virtual address is ignored in the entry match. TLB entries which have their G bit set to 1 are not modified. TLBINVF causes all entries to be invalidated. Single TLB entry can be marked as invalid on TLB entry write by having EntryHi.EHINV set to 1. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add new Read-Inhibit and Execute-Inhibit exceptionsLeon Alrae
An Execute-Inhibit exception occurs when the virtual address of an instruction fetch matches a TLB entry whose XI bit is set. This exception type can only occur if the XI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain XIE bit. An Read-Inhibit exception occurs when the virtual address of a memory load reference matches a TLB entry whose RI bit is set. This exception type can only occur if the RI bit is implemented within the TLB and is enabled, this is denoted by the PageGrain RIE bit. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: add RI and XI fields to TLB entryLeon Alrae
In Revision 3 of the architecture, the RI and XI bits were added to the TLB to enable more secure access of memory pages. These bits (along with the Dirty bit) allow the implementation of read-only, write-only, no-execute access policies for mapped pages. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-11-03target-mips: distinguish between data load and instruction fetchLeon Alrae
Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Yongbok Kim <yongbok.kim@imgtec.com>
2014-09-25target-mips: Use cpu_exec_interrupt qom hookRichard Henderson
Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Tested-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1410626734-3804-19-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-18target-mips: get_physical_address: Add KVM awarenessJames Hogan
MIPS KVM trap & emulate mode (which is currently the only supported mode) has to add an extra kseg0/kseg1 at 0x40000000 and an extra kseg2/kseg3 at 0x60000000. Take this into account in get_physical_address() so that debug memory access works. This is done by translating the address to a standard kseg0 or kseg2 address before doing the normal address translation. The real virtual address is still used for TLB lookups. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-18target-mips: get_physical_address: Add defines for segment basesJames Hogan
Add preprocessor definitions for 32bit segment bases for use in get_physical_address(). These will also be taken advantage of in the next patch which adds KVM awareness. Signed-off-by: James Hogan <james.hogan@imgtec.com> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-27target-mips: Avoid shifting left into sign bitPeter Maydell
Add U suffix to various places where we shift a 1 left by 31, to avoid undefined behaviour. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-03-13cputlb: Change tlb_set_page() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cputlb: Change tlb_flush_page() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Turn cpu_handle_mmu_fault() into a CPUClass hookAndreas Färber
Note that while such functions may exist both for *-user and softmmu, only *-user uses the CPUState hook, while softmmu reuses the prototype for calling it directly. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-08-28target-mips: fix get_physical_address() #if 0 build errorJames Hogan
In get_physical_address() is a qemu_log() call inside an #if 0 block. When enabled the following build error is hit: target-mips/helper.c In function ‘get_physical_address’: target-mips/helper.c:220:13: error: format ‘%x’ expects argument of type ‘unsigned int’, but argument 5 has type ‘hwaddr’ [-Werror=format] Fix the *physical (hwaddr) formatting by using "%"HWADDR_PRIx instead of TARGET_FMT_lx. Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-07-23cpu: Turn cpu_get_phys_page_debug() into a CPUClass hookAndreas Färber
Change breakpoint_invalidate() argument to CPUState alongside. Since all targets now assign a softmmu-only field, we can drop helpers cpu_class_set_{do_unassigned_access,vmsd}() and device_class_set_vmsd(). Prepares for changing cpu_memory_rw_debug() argument to CPUState. Acked-by: Max Filippov <jcmvbkbc@gmail.com> (for xtensa) Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-20linux-user: Save the correct resume address for MIPS signal handlingKwok Cheung Yeung
The current ISA mode needs to be saved in bit 0 of the resume address. If the current instruction happens to be in a branch delay slot, then the address of the preceding jump instruction should be stored instead. exception_resume_pc already does both of these tasks, so it is made available and reused. MIPS_HFLAG_BMASK in hflags is cleared, otherwise QEMU may treat the first instruction of the signal handler as a delay slot instruction. Signed-off-by: Kwok Cheung Yeung <kcy@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-10-31target-mips: Add ASE DSP resources access checkJia Liu
Add MIPS ASE DSP resources access check. Signed-off-by: Jia Liu <proljc@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2012-10-23Rename target_phys_addr_t to hwaddrAvi Kivity
target_phys_addr_t is unwieldly, violates the C standard (_t suffixes are reserved) and its purpose doesn't match the name (most target_phys_addr_t addresses are not target specific). Replace it with a finger-friendly, standards conformant hwaddr. Outstanding patchsets can be fixed up with the command git rebase -i --exec 'find -name "*.[ch]" | xargs s/target_phys_addr_t/hwaddr/g' origin Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-06-04target-mips: Use cpu_reset() in do_interrupt()Andreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-03-14target-mips: Don't overuse CPUStateAndreas Färber
Scripted conversion: sed -i "s/CPUState/CPUMIPSState/g" target-mips/*.[hc] sed -i "s/#define CPUMIPSState/#define CPUState/" target-mips/cpu.h Signed-off-by: Andreas Färber <afaerber@suse.de> Acked-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-14Rename cpu_reset() to cpu_state_reset()Andreas Färber
Frees the identifier cpu_reset for QOM CPUs (manual rename). Don't hide the parameter type behind explicit casts, use static functions with strongly typed argument to indirect. Signed-off-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-14Fix spelling in comments, documentation and messagesStefan Weil
accidently->accidentally annother->another choosen->chosen consideres->considers decriptor->descriptor developement->development paramter->parameter preceed->precede preceeding->preceding priviledge->privilege propogation->propagation substraction->subtraction throught->through upto->up to usefull->useful Fix also grammar in posix-aio-compat.c Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-09-06mips: Correct VInt vector generationEdgar E. Iglesias
1. The pending need to pass the Status IM gating. 2. The priority is from seven (highest prio) down to zero. QEMU was doing the opposite. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-08-07Remove unused is_softmmu parameter from cpu_handle_mmu_faultBlue Swirl
Parameter is_softmmu (and its evil mutant twin brother is_softmuu) is not used in cpu_*_handle_mmu_fault() functions, remove them and adjust callers. Acked-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-06-26Remove exec-all.h include directivesBlue Swirl
Most exec-all.h include directives are now useless, remove them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-15target-mips: Fix warning caused by unused local variableAurelien Jarno
Fix compilation with gcc-4.6, based on a patch from Stefan Weil <weil@mail.berlios.de>. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-08-06mips: Add support for VInt and VEIC irq modesEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-17target-mips: fix xtlb exception for loongsonAurelien Jarno
Loongson 2E and 2F use the same entry for xtlb and tlb exception, at offset 0x000. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-09target-mips: add microMIPS exception handler supportNathan Froyd
Unlike MIPS16, microMIPS lets you choose the ISA mode for your exception handlers. The ISA mode is selectable via a user-writable CP0.Config3 flag. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-03-17Large page TLB flushPaul Brook
QEMU uses a fixed page size for the CPU TLB. If the guest uses large pages then we effectively split these into multiple smaller pages, and populate the corresponding TLB entries on demand. When the guest invalidates the TLB by virtual address we must invalidate all entries covered by the large page. However the address used to invalidate the entry may not be present in the QEMU TLB, so we do not know which regions to clear. Implementing a full vaiable size TLB is hard and slow, so just keep a simple address/mask pair to record which addresses may have been mapped by large pages. If the guest invalidates this region then flush the whole TLB. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12Target specific usermode cleanupPaul Brook
Disable various target specific code that is only relevant to system emulation. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12Remove cpu_get_phys_page_debug from userspace emulationPaul Brook
cpu_get_phys_page_debug makes no sense for userspace emulation, so remove it. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-06target-mips: don't call cpu_loop_exit() from helper.cAurelien Jarno
In helper.c AREG0 may not correspond do env, so it's not possible to call cpu_loop_exit() here. Call it from op_helper.c instead. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: change interrupt bits to be mips16-awareNathan Froyd
We need to stash the operating mode into the low bit of the error PC and restore it on return from interrupts. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-30target-mips: add a function to do virtual -> physical translationsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-30target-mips: split code raising MMU exception in a separate functionAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-11-22target-mips: fix physical address type in MMU functionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-30target-mips: unmatched brackets in if 0Michael S. Tsirkin
Fix unmatched braket in commented out code Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-05-13Include assert.h from qemu-common.hPaul Brook
Include assert.h from qemu-common.h and remove other direct uses. cpu-all.h still need to include it because of the dyngen-exec.h hacks Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-01-15Convert references to logfile/loglevel to use qemu_log*() macrosaliguori
This is a large patch that changes all occurrences of logfile/loglevel global variables to use the new qemu_log*() macros. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6338 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 13:44:18 +0000