aboutsummaryrefslogtreecommitdiff
path: root/target-i386
AgeCommit message (Collapse)Author
2015-10-28target-*: Advance pc after recognizing a breakpointRichard Henderson
Some targets already had this within their logic, but make sure it's present for all targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-27target-i386: Enable "check" mode by defaultEduardo Habkost
Current default behavior of QEMU is to silently disable features that are not supported by the host when a CPU model is requested in the command-line. This means that in addition to risking breaking guest ABI by default, we are silent about it. I would like to enable "enforce" by default, but this can easily break existing production systems because of the way libvirt makes assumptions about CPU models today (this will change in the future, once QEMU provide a proper interface for checking if a CPU model is runnable). But there's no reason we should be silent about it. So, change target-i386 to enable "check" mode by default so at least we have some warning printed to stderr (and hopefully logged somewhere) when QEMU disables a feature that is not supported by the host system. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-27target-i386: Don't left shift negative constantEduardo Habkost
Left shift of negative values is undefined behavior. Detected by clang: qemu/target-i386/translate.c:2423:26: runtime error: left shift of negative value -8 This changes the code to reverse the sign after the left shift. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Use 1UL for bit shiftEduardo Habkost
Fix undefined behavior detected by clang runtime check: qemu/target-i386/cpu.c:1494:15: runtime error: left shift of 1 by 31 places cannot be represented in type 'int' While doing that, add extra parenthesis for clarity. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Add DE to TCG_FEATURESEduardo Habkost
Now DE is supported by TCG so it can be enabled in CPUID bits. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Ensure always-1 bits on DR6 can't be clearedEduardo Habkost
Bits 4-11 and 16-31 on DR6 are documented as always 1, so ensure they can't be cleared by software. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Check CR4[DE] for processing DR4/DR5Richard Henderson
Introduce helper_get_dr so that we don't have to put CR4[DE] into the scarce HFLAGS resource. At the same time, rename helper_movl_drN_T0 to helper_set_dr and set the helper flags. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Handle I/O breakpointsEduardo Habkost
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Optimize setting dr[0-3]Richard Henderson
If the debug register is not enabled, we need do nothing besides update the register. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Move hw_*breakpoint_* functionsRichard Henderson
They're only used from bpt_helper.c now. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Ensure bit 10 on DR7 is never clearedEduardo Habkost
Bit 10 of DR7 is documented as always set to 1, so ensure that's always the case. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Re-introduce optimal breakpoint removalRichard Henderson
Before the last patch, we had an efficient loop that disabled local breakpoints on task switch. Re-add that, but in a more general way that handles changes to the global enable bits too. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Introduce cpu_x86_update_dr7Richard Henderson
This moves the last of the iteration over breakpoints into the bpt_helper.c file. This also allows us to make several breakpoint functions static. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: Disable cache info passthrough by defaultEduardo Habkost
The host cache information may not make sense for the guest if the VM CPU topology doesn't match the host CPU topology. To make sure we won't expose broken cache information to the guest, disable cache info passthrough by default, and add a new "host-cache-info" property that can be used to enable the old behavior for users that really need it. Cc: Benoît Canet <benoit@irqsave.net> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-23target-i386: allow any alignment for SMBASEPaolo Bonzini
Processors up to the Pentium (says Bochs---I do not have old enough manuals) require a 32KiB alignment for the SMBASE, but newer processors do not need that, and Tiano Core will use non-aligned SMBASE values. Reported-by: Michael D Kinney <michael.d.kinney@intel.com> Cc: Laszlo Ersek <lersek@redhat.com> Cc: Jordan Justen <jordan.l.justen@intel.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-19kvm: Allow the Hyper-V vendor ID to be specifiedAlex Williamson
According to Microsoft documentation, the signature in the standard hypervisor CPUID leaf at 0x40000000 identifies the Vendor ID and is for reporting and diagnostic purposes only. We can therefore allow the user to change it to whatever they want, within the 12 character limit. Add a new hv-vendor-id option to the -cpu flag to allow for this, ex: -cpu host,hv_time,hv-vendor-id=KeenlyKVM Link: http://msdn.microsoft.com/library/windows/hardware/hh975392 Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Message-Id: <20151016153356.28104.48612.stgit@gimli.home> [Adjust error message to match the property name, use error_report. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19kvm: Move x86-specific functions into target-i386/kvm.cThomas Huth
The functions for checking xcrs, xsave and pit_state2 are only used on x86, so they should reside in target-i386/kvm.c. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1444933820-6968-1-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19kvm: Pass PCI device pointer to MSI routing functionsPavel Fedin
In-kernel ITS emulation on ARM64 will require to supply requester IDs. These IDs can now be retrieved from the device pointer using new pci_requester_id() function. This patch adds pci_dev pointer to KVM GSI routing functions and makes callers passing it. x86 architecture does not use requester IDs, but hw/i386/kvm/pci-assign.c also made passing PCI device pointer instead of NULL for consistency with the rest of the code. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-Id: <ce081423ba2394a4efc30f30708fca07656bc500.1444916432.git.p.fedin@samsung.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12target-i386/kvm: Hyper-V HV_X64_MSR_VP_RUNTIME supportAndrey Smetanin
HV_X64_MSR_VP_RUNTIME msr used by guest to get "the time the virtual processor consumes running guest code, and the time the associated logical processor spends running hypervisor code on behalf of that guest." Calculation of that time is performed by task_cputime_adjusted() for vcpu task by KVM side. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> Message-Id: <1442397584-16698-4-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12target-i386/kvm: set Hyper-V features cpuid bit HV_X64_MSR_VP_INDEX_AVAILABLEAndrey Smetanin
Hyper-V features bit HV_X64_MSR_VP_INDEX_AVAILABLE value is based on cpu option "hv-vpindex" and kernel support of HV_X64_MSR_VP_INDEX. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> Message-Id: <1442397584-16698-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-12target-i386/kvm: Hyper-V HV_X64_MSR_RESET supportAndrey Smetanin
HV_X64_MSR_RESET msr is used by Hyper-V based Windows guest to reset guest VM by hypervisor. This msr is stateless so no migration/fetch/update is required. This code checks cpu option "hv-reset" and support by kernel. If both conditions are met appropriate Hyper-V features cpuid bit is set. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> CC: "Andreas Färber" <afaerber@suse.de> CC: Marcelo Tosatti <mtosatti@redhat.com> Message-Id: <1442397584-16698-2-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-09qdev: Protect device-list-properties against broken devicesMarkus Armbruster
Several devices don't survive object_unref(object_new(T)): they crash or hang during cleanup, or they leave dangling pointers behind. This breaks at least device-list-properties, because qmp_device_list_properties() needs to create a device to find its properties. Broken in commit f4eb32b "qmp: show QOM properties in device-list-properties", v2.1. Example reproducer: $ qemu-system-aarch64 -nodefaults -display none -machine none -S -qmp stdio {"QMP": {"version": {"qemu": {"micro": 50, "minor": 4, "major": 2}, "package": ""}, "capabilities": []}} { "execute": "qmp_capabilities" } {"return": {}} { "execute": "device-list-properties", "arguments": { "typename": "pxa2xx-pcmcia" } } qemu-system-aarch64: /home/armbru/work/qemu/memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. Aborted (core dumped) [Exit 134 (SIGABRT)] Unfortunately, I can't fix the problems in these devices right now. Instead, add DeviceClass member cannot_destroy_with_object_finalize_yet to mark them: * Hang during cleanup (didn't debug, so I can't say why): "realview_pci", "versatile_pci". * Dangling pointer in cpus: most CPUs, plus "allwinner-a10", "digic", "fsl,imx25", "fsl,imx31", "xlnx,zynqmp", because they create such CPUs * Assert kvm_enabled(): "host-x86_64-cpu", host-i386-cpu", "host-powerpc64-cpu", "host-embedded-powerpc-cpu", "host-powerpc-cpu" (the powerpc ones can't currently reach the assertion, because the CPUs are only registered when KVM is enabled, but the assertion is arguably in the wrong place all the same) Make qmp_device_list_properties() fail cleanly when the device is so marked. This improves device-list-properties from "crashes, hangs or leaves dangling pointers behind" to "fails". Not a complete fix, just a better-than-nothing work-around. In the above reproducer, device-list-properties now fails with "Can't list properties of device 'pxa2xx-pcmcia'". This also protects -device FOO,help, which uses the same machinery since commit ef52358 "qdev-monitor: include QOM properties in -device FOO, help output", v2.2. Example reproducer: $ qemu-system-aarch64 -machine none -device pxa2xx-pcmcia,help Before: qemu-system-aarch64: .../memory.c:1307: memory_region_finalize: Assertion `((&mr->subregions)->tqh_first == ((void *)0))' failed. After: Can't list properties of device 'pxa2xx-pcmcia' Cc: "Andreas Färber" <afaerber@suse.de> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Anthony Green <green@moxielogic.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Jia Liu <proljc@gmail.com> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Walle <michael@walle.cc> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Cc: qemu-ppc@nongnu.org Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <1443689999-12182-10-git-send-email-armbru@redhat.com>
2015-10-07tcg: Remove gen_intermediate_code_pcRichard Henderson
It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Pass data argument to restore_state_to_opcRichard Henderson
The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Add TCG_MAX_INSNSRichard Henderson
Adjust all translators to respect it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Drop cpu_gen_code defineRichard Henderson
This symbol no longer exists. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-i386: Add cc_op state to insn_startRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Introduce and use cpu_breakpoint_testRichard Henderson
Reduce the boilerplate required for each target. At the same time, move the test for breakpoint after calling tcg_gen_insn_start. Note that arm and aarch64 do not use cpu_breakpoint_test, but still move the inline test down after tcg_gen_insn_start. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Increment num_insns immediately after tcg_gen_insn_startRichard Henderson
This does tidy the icount test common to all targets. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Unconditionally emit tcg_gen_insn_startRichard Henderson
While we're at it, emit the opcode adjacent to where we currently record data for search_pc. This puts gen_io_start et al on the "correct" side of the marker. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Rename debug_insn_start to insn_startRichard Henderson
With an eye toward making it mandatory. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-02cpu/apic: drop icc bus/bridgeChen Fan
After CPU hotplug has been converted to BUS-less hot-plug infrastructure, the only function ICC bus performs is to propagate reset to LAPICs. However LAPIC could be reset by registering its reset handler after all device are initialized. Do so and drop ~30LOC of not needed anymore ICCBus related code. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02apic: move APIC's MMIO region mapping into APICChen Fan
When ICC bus/bridge is removed, APIC MMIO will be left unmapped since it was mapped into system's address space indirectly by ICC bridge. Fix it by moving mapping into APIC code, so it would be possible to remove ICC bus/bridge code later. Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com> Signed-off-by: Zhu Guihua <zhugh.fnst@cn.fujitsu.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02Correctly re-init EFER state during INIT IPIBill Paul
When doing a re-initialization of a CPU core, the default state is to _not_ have 64-bit long mode enabled. This means the LME (long mode enable) and LMA (long mode active) bits in the EFER model-specific register should be cleared. However, the EFER state is part of the CPU environment which is preserved by do_cpu_init(), so if EFER.LME and EFER.LMA were set at the time an INIT IPI was received, they will remain set after the init completes. This is contrary to what the Intel architecture manual describes and what happens on real hardware, and it leaves the CPU in a weird state that the guest can't clear. To fix this, the 'efer' member of the CPUX86State structure has been moved to an area outside the region preserved by do_cpu_init(), so that it can be properly re-initialized by x86_cpu_reset(). Signed-off-by: Bill Paul <wpaul@windriver.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02target-i386: add ABM to Haswell* and Broadwell* CPU modelsPaolo Bonzini
ABM is only implemented as a single instruction set by AMD; all AMD processors support both instructions or neither. Intel considers POPCNT as part of SSE4.2, and LZCNT as part of BMI1, but Intel also uses AMD's ABM flag to indicate support for both POPCNT and LZCNT. It has to be added to Haswell and Broadwell because Haswell, by adding LZCNT, has completed the ABM. Tested with "qemu-kvm -cpu Haswell-noTSX,enforce" (and also with older machine types) on an Haswell-EP machine. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02target-i386: get/put MSR_TSC_AUX across reset and migrationAmit Shah
There's one report of migration breaking due to missing MSR_TSC_AUX save/restore. Fix this by adding a new subsection that saves the state of this MSR. https://bugzilla.redhat.com/show_bug.cgi?id=1261797 Reported-by: Xiaoqing Wei <xwei@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: "Dr. David Alan Gilbert" <dgilbert@redhat.com> CC: Marcelo Tosatti <mtosatti@redhat.com> CC: Richard Henderson <rth@twiddle.net> CC: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02target-i386: Make check_hw_breakpoints staticRichard Henderson
The function is now only used from within a single file. Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02target-i386: Move breakpoint related functions to new fileRichard Henderson
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-10-02target-i386: Convert kvm_default_*features to property/value pairsEduardo Habkost
Convert the kvm_default_features and kvm_default_unset_features arrays into a simple list of property/value pairs that will be applied to X86CPU objects when using KVM. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2015-09-25i386: interrupt poll processingPavel Dovgalyuk
This patch updates x86_cpu_exec_interrupt function. It can process two interrupt request at a time (poll and another one). This makes its execution non-deterministic. Determinism is requred for recorded icount execution. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162410.8676.13042.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25i386: partial revert of interrupt poll fixPavel Dovgalyuk
Processing CPU_INTERRUPT_POLL requests in cpu_has_work functions break the determinism of cpu_exec. This patch is required to make interrupts processing deterministic. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162331.8676.15286.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25i386: Rename ELF_MACHINE to be x86 specificPeter Crosthwaite
Rename ELF_MACHINE to be I386 specific. This is used as-is by the multiboot loader. Linux-user previously used this definition but will not anymore, falling back to the default bahaviour of using ELF_ARCH as ELF_MACHINE. This removes another architecture specific definition from the global namespace. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-By: Riku Voipio <riku.voipio@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25hmp: implemented io apic dump state for TCGPavel Butsykin
Added support emulator for the hmp command "info ioapic" Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-10-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25hmp: added io apic dump statePavel Butsykin
Added the hmp command to query io apic state, may be usefull after guest crashes to understand IRQ routing in guest. Implementation is only for kvm here. The dump will look like (qemu) info ioapic ioapic id=0x00 sel=0x26 (redir[11]) pin 0 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical pin 1 0x0000000000000031 dest=0 vec=49 active-hi edge fixed physical ... pin 23 0x0000000000010000 dest=0 vec=0 active-hi edge masked fixed physical IRR (none) Remote IRR (none) Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-9-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25hmp: added local apic dump statePavel Butsykin
Added the hmp command to query local apic registers state, may be usefull after guest crashes to understand IRQ routing in guest. (qemu) info lapic dumping local APIC state for CPU 0 LVT0 0x00010700 active-hi edge masked ExtINT (vec 0) LVT1 0x00000400 active-hi edge NMI LVTPC 0x00010000 active-hi edge masked Fixed (vec 0) LVTERR 0x000000fe active-hi edge Fixed (vec 254) LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0) LVTT 0x000000ef active-hi edge one-shot Fixed (vec 239) Timer DCR=0x3 (divide by 16) initial_count = 61360 SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255 ICR 0x000000fd physical edge de-assert no-shorthand ICR2 0x00000001 cpu 1 (X2APIC ID) ESR 0x00000000 ISR (none) IRR 239 APR 0x00 TPR 0x00 DFR 0x0f LDR 0x00 PPR 0x00 Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1442927901-1084-7-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-25utils: rename strtosz to use qemu prefixMarc-André Lureau
Not only it makes sense, but it gets rid of checkpatch warning: WARNING: consider using qemu_strtosz in preference to strtosz Also remove get rid of tabs to please checkpatch. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <1442419377-9309-1-git-send-email-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* Linux header update and cleanup * Support for HyperV crash report * Cleanup of target-specific HMP commands * Multiarch batch * Checkpatch fix for Perl 5.22 * NBD fix * Revert incorrect commit 5243722376 # gpg: Signature made Wed 16 Sep 2015 16:39:01 BST using RSA key ID 78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" * remotes/bonzini/tags/for-upstream: (24 commits) nbd: release exp->blk after all clients are closed checkpatch: Escape left braces in regex monitor: uninclude cpu_ldst include/exec: Move cputlb exec.c defs out cputlb: Change tlb_set_dirty() arg to cpu cputlb: move CPU_LOOP() for tlb_reset() to exec.c translate: move real_host_page setting to -common tcg: Move tci_tb_ptr to -common tcg: split tcg_op_defs to -common translate-all: Move tcg_handle_interrupt() to -common cpu-exec: Migrate some generic fns to cpu-exec-common qemu-char: Use g_new() & friends where that makes obvious sense monitor: added generation of documentation for hmp-commands-info.hx hmp-commands.hx: fix end of table info monitor: remove target-specific code from monitor.c hmp-commands-info: move info_cmds content out of monitor.c i386/kvm: Hyper-v crash msrs set/get'ers and migration kvm: Add kvm system event crash handler cpu: Add crash_occurred flag into CPUState target-i386: move asm-x86/hyperv.h to standard-headers ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-16monitor: remove target-specific code from monitor.cPavel Butsykin
Move target-specific code out of /monitor.c to /target-*/monitor.c, this will avoid code cluttering and using random ifdeffery. The solution is quite simple, but solves the issue of the separation of target-specific code from monitor. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Peter Maydell <peter.maydell@linaro.org> Message-Id: <1441899541-1856-3-git-send-email-den@openvz.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16i386/kvm: Hyper-v crash msrs set/get'ers and migrationAndrey Smetanin
KVM Hyper-V based guests can notify hypervisor about occurred guest crash by writing into Hyper-V crash MSR's. This patch does handling and migration of HV_X64_MSR_CRASH_P0-P4, HV_X64_MSR_CRASH_CTL msrs. User can enable these MSR's by 'hv-crash' option. Signed-off-by: Andrey Smetanin <asmetanin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Andreas Färber <afaerber@suse.de> Message-Id: <1435924905-8926-13-git-send-email-den@openvz.org> [Folks, stop abrviating variable names!!! Also fix compilation on non-Linux/x86. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-09-16target-i386: move asm-x86/hyperv.h to standard-headersPaolo Bonzini
The Hyper-V definitions are an industry standard and can be used from code that is not KVM-specific. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>