| Age | Commit message (Collapse) | Author |
|---|
|
This adds a new CPU model named "Broadwell". It has all the features
from Haswell, plus PREFETCHW, RDSEED, ADX, SMAP.
PREFETCHW was already supported as "3dnowprefetch".
RDSEED, ADX was added on Linux v3.15-rc1.
SMAP was added on Linux v3.15-rc2.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Wang, Yong Y <yong.y.wang@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dugger, Donald D <donald.d.dugger@intel.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Expose "Invariant TSC" flag, if KVM is enabled. From Intel documentation:
17.13.1 Invariant TSC The time stamp counter in newer processors may
support an enhancement, referred to as invariant TSC. Processor’s
support for invariant TSC is indicated by CPUID.80000007H:EDX[8].
The invariant TSC will run at a constant rate in all ACPI P-, C-.
and T-states. This is the architectural behavior moving forward. On
processors with invariant TSC support, the OS may use the TSC for wall
clock timer services (instead of ACPI or HPET timers). TSC reads are
much more efficient and do not incur the overhead associated with a ring
transition or access to a platform resource.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[ehabkost: redo feature filtering to use .tcg_features]
[ehabkost: add CPUID_APM_INVTSC macro, add it to .unmigratable_flags]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Invariant TSC documentation mentions that "invariant TSC will run at a
constant rate in all ACPI P-, C-. and T-states".
This is not the case if migration to a host with different TSC frequency
is allowed, or if savevm is performed. So block migration/savevm.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[AF+mtosatti: Updated error message]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Having only migratable flags reported by default on the "host" CPU model
is safer for the following reasons:
* Existing users may expect "-cpu host" to be migration-safe, if they
take care of always using compatible host CPUs, host kernels, and
QEMU versions.
* Users who don't care aboug migration and want to enable all features
supported by the host kernel can simply change their setup to use
migratable=no.
Without this change, people using "-cpu host" will stop being able to
migrate, because now "invtsc" is getting enabled by default.
We are not setting migratable=yes by default on all X86CPU subclasses,
because users should be able to get non-migratable features enabled if
they ask for them explicitly.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This flag will allow the user to choose between two modes:
* All flags that can be enabled on the host, even if unmigratable
(migratable=no);
* All flags that can be enabled on the host, are known to QEMU
and migratable (migratable=yes).
The default is still migratable=false, to keep current behavior, but
this will be changed to migratable=true by another patch.
My plan was to support the "migratable" flag on all CPU classes, but
have the default to "false" on all CPU models except "host". However,
DeviceClass has no mechanism to allow a child class to have a different
property default from the parent class yet, so by now only the "host"
CPU model will support the "migratable" flag.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
If enforce/check is specified in TCG mode, QEMU will ensure all CPU
features are supported by TCG, so no CPU feature is silently disabled.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Be explicit about TCG vs. !KVM]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Instead of manually filtering each feature word, add a tcg_features
field to FeatureWordInfo, and use that field to filter all feature words
in TCG mode.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Now that we have the feature word arrays, we don't need to manually copy
each array item, we can simply iterate through each feature word.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Those macros will be used in the feature_word_info array data, so need
to be defined earlier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
TCG doesn't support any of the feature flags on FEAT_KVM and
FEAT_C000_0001_EDX feature words, so clear all bits on those feature
words.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
The TCG_7_0_EBX_FEATURES macro was defined but never used (it even had a
typo that was never noticed). Make the existing TCG feature filtering
code use it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Instead of an #ifdef in the middle of the code, just set
TCG_EXT2_FEATURES to a different value depending on TARGET_X86_64.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This will allow us to re-use the feature filtering logic (and the
check/enforce flag logic) for TCG.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This will help us simplify the code that calls
report_unavailable_features() later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Merge filter_features_for_kvm() and kvm_check_features_against_host().
Both functions made exactly the same calculations, the only difference
was that filter_features_for_kvm() changed the bits on cpu->features[],
and kvm_check_features_against_host() did error reporting.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Instead of checking and calling unavailable_host_feature() once for each
bit, simply call the function (now renamed to
report_unavailable_features()) once for each feature word.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Drop unused return value]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
KVM never supported the MONITOR flag so it doesn't make sense to have it
enabled by default when KVM is enabled.
The rationale here is similar to the cases where it makes sense to have
a feature enabled by default on all CPU models when on KVM mode (e.g.
x2apic). In this case we are having a feature disabled by default for
the same reasons.
In this case we don't need machine-type compat code because it is
currently impossible to run a KVM VM with the MONITOR flag set.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This patch eliminates the (now) redundant copy of the Advanced Encryption Standard (AES)
ShiftRows and InvShiftRows tables; the code is updated to use the common tables declared in
include/qemu/aes.h.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
|
|
After previous Peter patch, they are redundant. This way we don't
assign them except when needed. Once there, there were lots of case
where the ".fields" indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (appart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Because of the "goto out", the contents of local_err are leaked
and lost.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The function tcg_gen_lshift() is unused; remove it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
* remotes/bonzini/softmmu-smap: (33 commits)
target-i386: cleanup x86_cpu_get_phys_page_debug
target-i386: fix protection bits in the TLB for SMEP
target-i386: support long addresses for 4MB pages (PSE-36)
target-i386: raise page fault for reserved bits in large pages
target-i386: unify reserved bits and NX bit check
target-i386: simplify pte/vaddr calculation
target-i386: raise page fault for reserved physical address bits
target-i386: test reserved PS bit on PML4Es
target-i386: set correct error code for reserved bit access
target-i386: introduce support for 1 GB pages
target-i386: introduce do_check_protect label
target-i386: tweak handling of PG_NX_MASK
target-i386: commonize checks for PAE and non-PAE
target-i386: commonize checks for 4MB and 4KB pages
target-i386: commonize checks for 2MB and 4KB pages
target-i386: fix coding standards in x86_cpu_handle_mmu_fault
target-i386: simplify SMAP handling in MMU_KSMAP_IDX
target-i386: fix kernel accesses with SMAP and CPL = 3
target-i386: move check_io helpers to seg_helper.c
target-i386: rename KSMAP to KNOSMAP
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
* remotes/kvm/uq/master:
kvm: Fix eax for cpuid leaf 0x40000000
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
kvm: Enable -cpu option to hide KVM
kvm: Ensure negative return value on kvm_init() error handling path
target-i386: set CC_OP to CC_OP_EFLAGS in cpu_load_eflags
target-i386: get CPL from SS.DPL
target-i386: rework CPL checks during task switch, preparing for next patch
target-i386: fix segment flags for SMM and VM86 mode
target-i386: Fix vm86 mode regression introduced in fd460606fd6f.
kvm_stat: allow choosing between tracepoints and old stats
kvmclock: Ensure time in migration never goes backward
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Make the code a bit more similar to x86_cpu_handle_mmu_fault.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
User pages must be marked as non-executable when running under SMEP;
otherwise, fetching the page first and then calling it will fail.
With this patch, all SMEP testcases in kvm-unit-tests now pass.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
4MB pages can use 40-bit addresses by putting the higher 8 bits in bits
20-13 of the PDE. Bit 21 is reserved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In large pages, bit 12 is for PAT, but bits starting at 13 are reserved.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
They can moved to after the dirty bit processing, and unified between
CR0.PG=1 and CR0.PG=0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The correct error code is 9 (present, reserved), not 8.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Given the simplifications to the code in the previous patches, this
is now very simple to do.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This will help adding 1GB page support in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Remove the tail of the PAE case, so that we can use "goto" in the
next patch to jump to the protection checks.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Do not use this MMU index at all if CR4.SMAP is false, and drop
the SMAP check from x86_cpu_handle_mmu_fault.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
With SMAP, implicit kernel accesses from user mode always behave as
if AC=0. To do this, kernel mode is not anymore a separate MMU mode.
Instead, KERNEL_IDX is renamed to KSMAP_IDX and the kernel mode accessors
wrap KSMAP_IDX and KNOSMAP_IDX.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Prepare for adding _kernel accessors there in the next patch.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is the mode where SMAP is overridden, put "NO" in its name.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This will collect all load and store helpers soon. For now
it is just a replacement for softmmu_exec.h, which this patch
stops including directly, but we also include it where this will
be necessary in order to simplify the next patch.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
They do not need to be in op_helper.c. Because cputlb.c now includes
softmmu_template.h twice for each size, io_readX must be elided the
second time through.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Since Linux kernel 3.5, KVM has documented eax for leaf 0x40000000
to be KVM_CPUID_FEATURES:
https://github.com/torvalds/linux/commit/57c22e5f35aa4b9b2fe11f73f3e62bbf9ef36190
But qemu still tries to set it to 0. It would be better to make qemu
and kvm consistent. This patch just fixes this issue.
Signed-off-by: Jidong Xiao <jidong.xiao@gmail.com>
[Include kvm_base in the value. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The latest Nvidia driver (337.88) specifically checks for KVM as the
hypervisor and reports Code 43 for the driver in a Windows guest when
found. Removing or changing the KVM signature is sufficient for the
driver to load and work. This patch adds an option to easily allow
the KVM hypervisor signature to be hidden using '-cpu kvm=off'. We
continue to expose KVM via the cpuid value by default. The state of
this option does not supercede or replace -enable-kvm or the accel=kvm
machine option. This only changes the visibility of KVM to the guest
and paravirtual features specifically tied to the KVM cpuid.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rather than include helper.h with N values of GEN_HELPER, include a
secondary file that sets up the macros to include helper.h. This
minimizes the files that must be rebuilt when changing the macros
for file N.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
There is no reason to keep that out of the function. The comment refers
to the disassembler's cc_op state rather than the CPUState field.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
