| Age | Commit message (Collapse) | Author |
|---|
|
x86 and SCSI fixes. I left out the APIC device model
patches, pending confirmation from the submitter that they really
fix QNX.
# gpg: Signature made Thu 13 Nov 2014 15:13:38 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
acpi: accurate overflow check
smbios: change 'ram_addr_t' variables to 'uint64_t'
kvmclock: Add comment explaining why we need cpu_clean_all_dirty()
target-i386: fix Coverity complaints about overflows
apic_common: migrate missing fields
target-i386: eliminate dead code and hoist common code out of "if"
virtio-scsi: Fix comment for VirtIOSCSIReq
virtio-scsi: dataplane: suppress guest notification
esp: Do not overwrite ESP_TCHI after reset
virtio-scsi: dataplane: fix allocation for 'cmd_vrings'
esp: fix coding standards
virtio-scsi: work around bug in old BIOSes
esp-pci: fixup deadlock with linux
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
sipi_vector is an int; it is shifted by 12 and passed as a 64-bit value,
which makes Coverity think that we wanted (uint64_t)sipi_vector << 12.
But actually it must be between 0 and 255. Make this explicit.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
ist != 0 is checked in the first "if", so it cannot be true in
the "else if" part. While at it, simplify the code and move
the ESP alignment out of the conditionals.
Reported by Coverity.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'remotes/mjt/tags/pull-trivial-patches-2014-11-11' into staging
trivial patches for 2014-11-11
# gpg: Signature made Tue 11 Nov 2014 14:38:39 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-11:
block: Fix comment for bdrv_co_get_block_status
sysbus: Correct SYSTEM_BUS(obj) defines
target-i386: cpu: keeping function parameters alignment on new line
xen-hvm: Remove redundant variable 'xstate'
coroutine-sigaltstack: Change jmp_buf to sigjmp_buf
pc-bios: petalogix-s3adsp1800.dtb: Use 'xlnx, xps-ethernetlite-2.00.a' instead of 'xlnx, xps-ethernetlite-2.00.b'
gdbstub: Add a missing case of signal number translation in gdbstub
numa: make 'info numa' take into account hotplugged memory
slirp/smbd: modify/set several parameters in generated smbd.conf
qemu-doc.texi: fix typos in x509 examples
icc_bus: fix typo ICC_BRIGDE -> ICC_BRIDGE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Make SVM be disabled by default on all CPU models when in KVM mode.
Nested SVM is enabled by default in the KVM kernel module, but it is
probably less stable than nested VMX (which is already disabled by
default).
Add a new compat function, x86_cpu_compat_kvm_no_autodisable(), to keep
compatibility on previous machine-types.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
TCG doesn't support VMX, and nested VMX is not enabled by default in the
KVM kernel module.
So, there's no reason to have VMX enabled by default on the core2duo and
coreduo CPU models, today. Even the newer Intel CPU model definitions
don't have it enabled.
In this case, we need machine-type compat code, as people may be running
the older machine-types on hosts that had VMX nesting enabled.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
The following CPU features were never supported by neither TCG or KVM,
so they are useless on the CPU model definitions, today:
* CPUID_DTS (DS)
* CPUID_HT
* CPUID_TM
* CPUID_PBE
* CPUID_EXT_DTES64
* CPUID_EXT_DSCPL
* CPUID_EXT_EST
* CPUID_EXT_TM2
* CPUID_EXT_XTPR
* CPUID_EXT_PDCM
* CPUID_SVM_LBRV
As using "enforce" mode is the only way to ensure guest ABI doesn't
change when moving to a different host, we should make "enforce" mode
the default or at least encourage management software to always use it.
In turn, to make "enforce" usable, we need CPU models that work without
always requiring some features to be explicitly disabled. This patch
removes the above features from all CPU model definitions.
We won't need any machine-type compat code for those changes, because it
is impossible to have existing VMs with those features enabled.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
KVM never supported the CPUID_ACPI flag, so it doesn't make sense to
have it enabled by default when KVM is enabled.
The motivation here is exactly the same we had for the MONITOR flag
(disabled by commit 136a7e9a85d7047461f8153f7d12c514a3d68f69).
And like in the MONITOR flag case, we don't need machine-type compat code
because it is currently impossible to run a KVM VM with the ACPI flag set.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
The x86_cpu_compat_disable_kvm_features() name was a bit confusing, as
it won't forcibly disable the feature for all CPU models (i.e. add it to
kvm_default_unset_features), but it will instead turn off the KVM
auto-enabling of the feature (i.e. remove it from kvm_default_features),
meaning the feature may still be enabled by default in some CPU models).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
'remotes/mjt/tags/pull-trivial-patches-2014-11-02' into staging
trivial patches for 2014-11-02
# gpg: Signature made Sun 02 Nov 2014 11:54:43 GMT using RSA key ID A4C3D7DB
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
* remotes/mjt/tags/pull-trivial-patches-2014-11-02: (23 commits)
vdi: wrapped uuid_unparse() in #ifdef
tap: fix possible fd leak in net_init_tap
tap: do not close(fd) in net_init_tap_one
target-i386: Remove unused model_features_t struct
tap_int.h: remove repeating NETWORK_SCRIPT defines
os-posix: reorder parent notification for -daemonize
pidfile: stop making pidfile error a special case
os-posix: replace goto again with a proper loop
os-posix: use global daemon_pipe instead of cryptic fds[1]
dump: Fix dump-guest-memory termination and use-after-close
virtio-9p-proxy: improve error messages in connect_namedsocket()
virtio-9p-proxy: fix error return in proxy_init()
virtio-9p-proxy: Fix sockfd leak
target-tricore: check return value before using it
net/slirp: specify logbase for smbd
Revert "os-posix: report error message when lock file failed"
util: Improve os_mem_prealloc error message
sparse: fix build
target-arm: A64: remove redundant store
target-xtensa: mark XtensaConfig structs as unused
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The struct is not used anymore and can be removed.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
This patch fixes instructions counting when execution is stopped on
breakpoint (e.g. set from gdb). Without a patch extra instruction is translated
and icount is incremented by invalid value (which equals to number of
executed instructions + 1).
Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
|
|
Add AVX512 feature bits, register definition and corresponding
xsave/vmstate support.
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Only Intel CPUs support hyperthreading. When users select threads>1 in
-smp option, QEMU fixes it by adjusting CPUID_0000_0001_EBX and
CPUID_8000_0008_ECX based on inputs (sockets, cores, threads);
so guest VM can boot correctly. However it is still better to gives
users a warning when such case happens.
Signed-off-by: Wei Huang <wei@redhat.com>
[As suggested by Eduardo, check for !IS_INTEL instead of AMD. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Usual mix of patches, the most important being Alex and Marcelo's
kvmclock fix. This was reverted last minute for 2.1, but it is now back
with the problematic case fixed.
Note: I will soon switch to a subkey for signing purposes. To verify
future signed pull requests from me, please update my key with
"gpg --recv-keys 9B4D86F2". You should see 3 new subkeys---the
one for signing will be a 2048-bit RSA key, 4E6B09D7.
# gpg: Signature made Fri 26 Sep 2014 15:34:44 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/bonzini/tags/for-upstream:
kvm/valgrind: don't mark memory as initialized
po: fix conflict with %.mo rule in rules.mak
kvmvapic: fix migration when VM paused and when not running Windows
serial: check if backed by a physical serial port at realize time
serial: reset state at startup
target-i386: update fp status fix
hw/dma/i8257: Silence phony error message
kvmclock: Ensure time in migration never goes backward
kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation
Introduce cpu_clean_all_dirty
pit: fix pit interrupt can't inject into vm after migration
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1410626734-3804-23-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Note that the code that was within the "exit" ifdef block
was identical to the cpu_compute_eflags inline, so make that
simplification at the same time.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 1410626734-3804-4-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch introduces cpu_set_fpuc() function, which changes fpuc field
of the CPU state and calls update_fp_status() function.
These calls update status of softfloat library and prevent bugs caused
by non-coherent rounding settings of the FPU and softfloat.
v2 changes:
* Added missed calls and intoduced setter function (as suggested by TeLeMan)
Reviewed-by: TeLeMan <geleman@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
|
|
Make the debug_excp_handler target specific hook into a QOM
CPU method.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Instead of simply printing a warning, report an error when invalid CPU
options are provided on the CPU model string.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
When the "migratable" property was implemented, the behavior was tested
by changing the default on the code, but actually using the option on
the command-line (e.g. "-cpu host,migratable=false") doesn't work as
expected. This is a regression for a common use case of "-cpu host",
which is to enable features that are supported by the host CPU + kernel
before feature-specific code is added to QEMU.
Fix this by initializing the feature words for "-cpu host" on
x86_cpu_parse_featurestr(), right after parsing the CPU options.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Mostly bugfixes + Alexey's interface-based implementation
of the NMI monitor command.
# gpg: Signature made Thu 28 Aug 2014 15:07:22 BST using RSA key ID 9B4D86F2
# gpg: Good signature from "Paolo Bonzini <pbonzini@redhat.com>"
# gpg: aka "Paolo Bonzini <bonzini@gnu.org>"
* remotes/kvm/tags/for-upstream:
mc146818rtc: reinitialize irq_reinject_on_ack_count on reset
target-i386: Add "tsc_adjust" CPU feature name
target-i386: Add "mpx" CPU feature name
vl: process -object after other backend options
checkpatch.pl: adjust typedef definition to QEMU coding style
x86: Clear MTRRs on vCPU reset
x86: kvm: Add MTRR support for kvm_get|put_msrs()
x86: Use common variable range MTRR counts
target-i386: Don't forbid NX bit on PAE PDEs and PTEs
spapr: Add support for new NMI interface
s390x: Migrate to new NMI interface
s390x: Convert QEMUMachine to MachineClass
cpus: Define callback for QEMU "nmi" command
kvm: run cpu state synchronization on target vcpu thread
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
tsc_adjust migration support is already implemented (commit
f28558d3d37ad3bc4e35e8ac93f7bf81a0d5622c), so we can add it to the list
of known feature names.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Migration support for MPX is already implemented (commit
79e9ebebbf2a00c46fcedb6dc7dd5e12bbd30216), so we can add it to the list
of known feature names.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The SDM specifies (June 2014 Vol3 11.11.5):
On a hardware reset, the P6 and more recent processors clear the
valid flags in variable-range MTRRs and clear the E flag in the
IA32_MTRR_DEF_TYPE MSR to disable all MTRRs. All other bits in the
MTRRs are undefined.
We currently do none of that, so whatever MTRR settings you had prior
to reset is what you have after reset. Usually this doesn't matter
because KVM often ignores the guest mappings and uses write-back
anyway. However, if you have an assigned device and an IOMMU that
allows NoSnoop for that device, KVM defers to the guest memory
mappings which are now stale after reset. The result is that OVMF
rebooting on such a configuration takes a full minute to LZMA
decompress the firmware volume, a process that is nearly instant on
the initial boot.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The MTRR state in KVM currently runs completely independent of the
QEMU state in CPUX86State.mtrr_*. This means that on migration, the
target loses MTRR state from the source. Generally that's ok though
because KVM ignores it and maps everything as write-back anyway. The
exception to this rule is when we have an assigned device and an IOMMU
that doesn't promote NoSnoop transactions from that device to be cache
coherent. In that case KVM trusts the guest mapping of memory as
configured in the MTRR.
This patch updates kvm_get|put_msrs() so that we retrieve the actual
vCPU MTRR settings and therefore keep CPUX86State synchronized for
migration. kvm_put_msrs() is also used on vCPU reset and therefore
allows future modificaitons of MTRR state at reset to be realized.
Note that the entries array used by both functions was already
slightly undersized for holding every possible MSR, so this patch
increases it beyond the 28 new entries necessary for MTRR state.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We currently define the number of variable range MTRR registers as 8
in the CPUX86State structure and vmstate, but use MSR_MTRRcap_VCNT
(also 8) to report to guests the number available. Change this to
use MSR_MTRRcap_VCNT consistently.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit e8f6d00c30ed88910d0d985f4b2bf41654172ceb ("target-i386: raise
page fault for reserved physical address bits") added a check that the
NX bit is not set on PAE PDPEs, but it also added it to rsvd_mask for
the rest of the function. This caused any PDEs or PTEs with NX set to be
erroneously rejected, making PAE guests with NX support unusable.
Signed-off-by: William Grant <wgrant@ubuntu.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Currently syscall instruction is buggy on user mode X86_64,
the EIP is updated after do_syscall(), that is too late for
clone(). Because clone() will create a thread at the env->EIP
(the address of syscall insn), and then child thread enters
do_syscall() again, that is not expected. Sometimes it is tragic.
User mode syscall insn emulation is not used MSR, so the
action should be same to INT 0x80. INT 0x80 will update EIP in
do_interrupt(), ditto for syscall() for consistency.
Signed-off-by: Jincheng Miao <jmiao@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
into staging
Tracing pull request
* remotes/stefanha/tags/tracing-pull-request:
virtio-rng: add some trace events
trace: add some tcg tracing support
trace: teach lttng backend to use format strings
trace: [tcg] Include TCG-tracing header on all targets
trace: [tcg] Include event definitions in "trace.h"
trace: [tcg] Generate TCG tracing routines
trace: [tcg] Include TCG-tracing helpers
trace: [tcg] Define TCG tracing helper routine wrappers
trace: [tcg] Define TCG tracing helper routines
trace: [tcg] Declare TCG tracing helper routines
trace: [tcg] Add 'tcg' event property
trace: [tcg] Argument type transformation machinery
trace: [tcg] Argument type transformation rules
trace: [tcg] Add documentation
trace: install simpletrace SystemTap tapset
simpletrace: add simpletrace.py --no-header option
trace: add tracetool simpletrace_stap format
trace: extract stap_escape() function for reuse
Conflicts:
Makefile.objs
|
|
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Signed-off-by: Chen Fan <chen.fan.fnst@cn.fujitsu.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Previously, execute would be disabled for all pages with SMEP enabled,
regardless of what mode the access took place in.
Signed-off-by: Ricky Zhou <ricky@rzhou.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
KVM_FEATURE_CLOCKSOURCE_STABLE_BIT is enabled by default and supported
by KVM. But not having a name defined makes QEMU treat it as an unknown
and unmigratable feature flag (as any unknown feature may possibly
require state to be migrated), and disable it by default on "-cpu host".
As a side-effect, the new name also makes the flag configurable,
allowing the user to disable it (which may be useful for testing or for
compatibility with old kernels).
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This adds a new CPU model named "Broadwell". It has all the features
from Haswell, plus PREFETCHW, RDSEED, ADX, SMAP.
PREFETCHW was already supported as "3dnowprefetch".
RDSEED, ADX was added on Linux v3.15-rc1.
SMAP was added on Linux v3.15-rc2.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: Wang, Yong Y <yong.y.wang@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Dugger, Donald D <donald.d.dugger@intel.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Expose "Invariant TSC" flag, if KVM is enabled. From Intel documentation:
17.13.1 Invariant TSC The time stamp counter in newer processors may
support an enhancement, referred to as invariant TSC. Processor’s
support for invariant TSC is indicated by CPUID.80000007H:EDX[8].
The invariant TSC will run at a constant rate in all ACPI P-, C-.
and T-states. This is the architectural behavior moving forward. On
processors with invariant TSC support, the OS may use the TSC for wall
clock timer services (instead of ACPI or HPET timers). TSC reads are
much more efficient and do not incur the overhead associated with a ring
transition or access to a platform resource.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
[ehabkost: redo feature filtering to use .tcg_features]
[ehabkost: add CPUID_APM_INVTSC macro, add it to .unmigratable_flags]
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Invariant TSC documentation mentions that "invariant TSC will run at a
constant rate in all ACPI P-, C-. and T-states".
This is not the case if migration to a host with different TSC frequency
is allowed, or if savevm is performed. So block migration/savevm.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[AF+mtosatti: Updated error message]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Having only migratable flags reported by default on the "host" CPU model
is safer for the following reasons:
* Existing users may expect "-cpu host" to be migration-safe, if they
take care of always using compatible host CPUs, host kernels, and
QEMU versions.
* Users who don't care aboug migration and want to enable all features
supported by the host kernel can simply change their setup to use
migratable=no.
Without this change, people using "-cpu host" will stop being able to
migrate, because now "invtsc" is getting enabled by default.
We are not setting migratable=yes by default on all X86CPU subclasses,
because users should be able to get non-migratable features enabled if
they ask for them explicitly.
Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This flag will allow the user to choose between two modes:
* All flags that can be enabled on the host, even if unmigratable
(migratable=no);
* All flags that can be enabled on the host, are known to QEMU
and migratable (migratable=yes).
The default is still migratable=false, to keep current behavior, but
this will be changed to migratable=true by another patch.
My plan was to support the "migratable" flag on all CPU classes, but
have the default to "false" on all CPU models except "host". However,
DeviceClass has no mechanism to allow a child class to have a different
property default from the parent class yet, so by now only the "host"
CPU model will support the "migratable" flag.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
If enforce/check is specified in TCG mode, QEMU will ensure all CPU
features are supported by TCG, so no CPU feature is silently disabled.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
[AF: Be explicit about TCG vs. !KVM]
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Instead of manually filtering each feature word, add a tcg_features
field to FeatureWordInfo, and use that field to filter all feature words
in TCG mode.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Now that we have the feature word arrays, we don't need to manually copy
each array item, we can simply iterate through each feature word.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Those macros will be used in the feature_word_info array data, so need
to be defined earlier.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
TCG doesn't support any of the feature flags on FEAT_KVM and
FEAT_C000_0001_EDX feature words, so clear all bits on those feature
words.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
The TCG_7_0_EBX_FEATURES macro was defined but never used (it even had a
typo that was never noticed). Make the existing TCG feature filtering
code use it.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Instead of an #ifdef in the middle of the code, just set
TCG_EXT2_FEATURES to a different value depending on TARGET_X86_64.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This will allow us to re-use the feature filtering logic (and the
check/enforce flag logic) for TCG.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
This will help us simplify the code that calls
report_unavailable_features() later.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
