aboutsummaryrefslogtreecommitdiff
path: root/target-i386/seg_helper.c
AgeCommit message (Collapse)Author
2014-11-12target-i386: eliminate dead code and hoist common code out of "if"Paolo Bonzini
ist != 0 is checked in the first "if", so it cannot be true in the "else if" part. While at it, simplify the code and move the ESP alignment out of the conditionals. Reported by Coverity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-09-25target-i386: Use cpu_exec_interrupt qom hookRichard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1410626734-3804-23-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-22linux-user: Fix syscall instruction usermode emulation on X86_64Jincheng Miao
Currently syscall instruction is buggy on user mode X86_64, the EIP is updated after do_syscall(), that is too late for clone(). Because clone() will create a thread at the env->EIP (the address of syscall insn), and then child thread enters do_syscall() again, that is not expected. Sometimes it is tragic. User mode syscall insn emulation is not used MSR, so the action should be same to INT 0x80. INT 0x80 will update EIP in do_interrupt(), ditto for syscall() for consistency. Signed-off-by: Jincheng Miao <jmiao@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
2014-06-05Merge remote-tracking branch 'remotes/bonzini/softmmu-smap' into stagingPeter Maydell
* remotes/bonzini/softmmu-smap: (33 commits) target-i386: cleanup x86_cpu_get_phys_page_debug target-i386: fix protection bits in the TLB for SMEP target-i386: support long addresses for 4MB pages (PSE-36) target-i386: raise page fault for reserved bits in large pages target-i386: unify reserved bits and NX bit check target-i386: simplify pte/vaddr calculation target-i386: raise page fault for reserved physical address bits target-i386: test reserved PS bit on PML4Es target-i386: set correct error code for reserved bit access target-i386: introduce support for 1 GB pages target-i386: introduce do_check_protect label target-i386: tweak handling of PG_NX_MASK target-i386: commonize checks for PAE and non-PAE target-i386: commonize checks for 4MB and 4KB pages target-i386: commonize checks for 2MB and 4KB pages target-i386: fix coding standards in x86_cpu_handle_mmu_fault target-i386: simplify SMAP handling in MMU_KSMAP_IDX target-i386: fix kernel accesses with SMAP and CPL = 3 target-i386: move check_io helpers to seg_helper.c target-i386: rename KSMAP to KNOSMAP ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05Merge remote-tracking branch 'remotes/kvm/uq/master' into stagingPeter Maydell
* remotes/kvm/uq/master: kvm: Fix eax for cpuid leaf 0x40000000 kvmclock: Ensure proper env->tsc value for kvmclock_current_nsec calculation kvm: Enable -cpu option to hide KVM kvm: Ensure negative return value on kvm_init() error handling path target-i386: set CC_OP to CC_OP_EFLAGS in cpu_load_eflags target-i386: get CPL from SS.DPL target-i386: rework CPL checks during task switch, preparing for next patch target-i386: fix segment flags for SMM and VM86 mode target-i386: Fix vm86 mode regression introduced in fd460606fd6f. kvm_stat: allow choosing between tracepoints and old stats kvmclock: Ensure time in migration never goes backward Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-05target-i386: fix kernel accesses with SMAP and CPL = 3Paolo Bonzini
With SMAP, implicit kernel accesses from user mode always behave as if AC=0. To do this, kernel mode is not anymore a separate MMU mode. Instead, KERNEL_IDX is renamed to KSMAP_IDX and the kernel mode accessors wrap KSMAP_IDX and KNOSMAP_IDX. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05target-i386: move check_io helpers to seg_helper.cPaolo Bonzini
Prepare for adding _kernel accessors there in the next patch. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-05softmmu: introduce cpu_ldst.hPaolo Bonzini
This will collect all load and store helpers soon. For now it is just a replacement for softmmu_exec.h, which this patch stops including directly, but we also include it where this will be necessary in order to simplify the next patch. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-28tcg: Invert the inclusion of helper.hRichard Henderson
Rather than include helper.h with N values of GEN_HELPER, include a secondary file that sets up the macros to include helper.h. This minimizes the files that must be rebuilt when changing the macros for file N. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2014-05-21target-i386: set CC_OP to CC_OP_EFLAGS in cpu_load_eflagsPaolo Bonzini
There is no reason to keep that out of the function. The comment refers to the disassembler's cc_op state rather than the CPUState field. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-21target-i386: rework CPL checks during task switch, preparing for next patchPaolo Bonzini
During task switch, all of CS.DPL, CS.RPL, SS.DPL must match (in addition to all the other requirements) and will be the new CPL. So far this worked by carefully setting the CS selector and flags before doing the task switch; but this will not work once we get the CPL from SS.DPL. Temporarily assume that the CPL comes from CS.RPL during task switch to a protected-mode task, until the descriptor of SS is loaded. Tested-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-21target-i386: fix segment flags for SMM and VM86 modePaolo Bonzini
With the next patch, these need to be correct or VM86 tasks have the wrong CPL. The flags are basically what the Intel VMX documentation say is mandatory for entry into a VM86 guest. For consistency, SMM ought to have the same flags except with CPL=0. Tested-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-21target-i386: Fix vm86 mode regression introduced in fd460606fd6f.Kevin O'Connor
Commit fd460606fd6f moved setting of eflags above calls to cpu_x86_load_seg_cache() in seg_helper.c. Unfortunately, in do_interrupt_protected() this moved the clearing of VM_MASK above a test for it. Fix this regression by storing the value of VM_MASK at the start of do_interrupt_protected(). Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13target-i386: the x86 CPL is stored in CS.selector - auto update hflags ↵Kevin O'Connor
accordingly. Instead of manually calling cpu_x86_set_cpl() when the CPL changes, check for CPL changes on calls to cpu_x86_load_seg_cache(R_CS). Every location that called cpu_x86_set_cpl() also called cpu_x86_load_seg_cache(R_CS), so cpu_x86_set_cpl() is no longer required. This fixes the SMM handler code as it was not setting/restoring the CPL level manually. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-05-13target-i386: set eflags prior to calling cpu_x86_load_seg_cache() in ↵Kevin O'Connor
seg_helper.c The cpu_x86_load_seg_cache() function inspects eflags, so make sure all changes to eflags are done prior to loading the segment caches. Signed-off-by: Kevin O'Connor <kevin@koconnor.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-03-13exec: Change cpu_abort() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu-exec: Change cpu_loop_exit() argument to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13cpu: Move exception_index field from CPU_COMMON to CPUStateAndreas Färber
Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-03-13target-i386: Clean up ENV_GET_CPU() usageAndreas Färber
Commits fdfba1a298ae26dd44bcfdb0429314139a0bc55a, f606604f1c10b60ef294f1b9b229426521a365e3 and 2c17449b3022ca9623c4a7e2a504a4150ac4ad30 added usages of ENV_GET_CPU() macro in target-specific code. Use x86_env_get_cpu() or reuse existing X86CPU variable instead. Cc: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-11exec: Make stl_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldl_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2013-07-09target-i386: Change LOG_PCALL_STATE() argument to CPUStateAndreas Färber
Since log_cpu_state_mask() argument was changed to CPUState, CPUArchState is no longer needed. Choose CPUState rather than X86CPU to not hide type mismatches with CPU(). Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09log: Change log_cpu_state[_mask]() argument to CPUStateAndreas Färber
Since commit 878096eeb278a8ac1ccd6667af73e026f29b4cf5 (cpu: Turn cpu_dump_{state,statistics}() into CPUState hooks) CPUArchState is no longer needed. Add documentation and make the functions available through qemu/log.h outside NEED_CPU_H to allow use in qom/cpu.c. Moving them to qom/cpu.h was not yet possible due to convoluted include paths, so that some devices grow an implicit and unneeded dependency on qom/cpu.h for now. Acked-by: Michael Walle <michael@walle.cc> (for lm32) Reviewed-by: Richard Henderson <rth@twiddle.net> [AF: Simplified mb_cpu_do_interrupt() and do_interrupt_all() changes] Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-07-09target-i386: Change do_interrupt_all() argument to X86CPUAndreas Färber
Prepares for log_cpu_state() changing argument to CPUState. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-15target-i386: fix over 80 chars warningsliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove EIP macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove EDI macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove ESI macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove ESP macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove EBP macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove EDX macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove ECX macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove EBX macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-06-15target-i386/helper: remove EAX macroliguang
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-03-12cpu: Replace do_interrupt() by CPUClass::do_interrupt methodAndreas Färber
This removes a global per-target function and thus takes us one step closer to compiling multiple targets into one executable. It will also allow to override the interrupt handling for certain CPU families. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-15target-i386: Introduce hw_{local,global}_breakpoint_enabled()liguang
hw_breakpoint_enabled() returned a bit field indicating whether a local breakpoint and/or global breakpoint was enabled. Avoid this number magic by using explicit boolean helper functions hw_local_breakpoint_enabled() and hw_global_breakpoint_enabled(), to aid readability. Reuse them for the hw_breakpoint_enabled() implementation and change its return type to bool. While at it, fix Coding Style issues (missing braces). Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-15target-i386: Define DR7 bit field constantsliguang
Implicit use of dr7 bit field is a little hard to understand, so define constants for them and use them consistently. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19exec: move include files to include/exec/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-10-05cpu_dump_state: move DUMP_FPU and DUMP_CCOP flags from x86-only to genericPeter Maydell
Move the DUMP_FPU and DUMP_CCOP flags for cpu_dump_state() from being x86-specific flags to being generic ones. This allows us to drop some TARGET_I386 ifdefs in various places, and means that we can (potentially) be more consistent across architectures about which monitor commands or debug abort printouts include FPU register contents and info about QEMU's condition-code optimisations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-08-14x86: switch to AREG0 free modeBlue Swirl
Add an explicit CPUX86State parameter instead of relying on AREG0. Remove temporary wrappers and switch to AREG0 free mode. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-14x86: avoid AREG0 in segmentation helpersBlue Swirl
Add an explicit CPUX86State parameter instead of relying on AREG0. Rename remains of op_helper.c to seg_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-14x86: use wrappers for memory access helpersBlue Swirl
Switch to wrapped versions of memory access functions. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-08-14x86: avoid AREG0 for condition code helpersBlue Swirl
Add an explicit CPUX86State parameter instead of relying on AREG0. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-06-28x86: rename op_helper.c to seg_helper.cBlue Swirl
Rename what is remaining of op_helper.c to seg_helper.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>