| Age | Commit message (Collapse) | Author |
|---|
|
Convert the reginfo structs for the generic timer registers
to use access functions rather than returning EXCP_UDEF from
their read handlers. In some cases this allows us to remove
a read handler completely.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Convert the performance monitor reginfo definitions to use
an accessfn rather than returning EXCP_UDEF from read and
write functions. This also allows us to fix a couple of XXX
cases where we weren't imposing the access restrictions on
RAZ/WI or constant registers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Several of the system registers handled via the ARMCPRegInfo
mechanism have access trap control bits controlling whether the
registers are accessible to lower privilege levels. Replace
the existing mechanism (allowing the read and write functions
to return EXCP_UDEF if access is denied) with a dedicated
"check access rights" function pointer in the ARMCPRegInfo.
This will allow us to simplify some of the register definitions,
which no longer need read/write functions purely to handle
the access checks.
We take the opportunity to define the return value from the
access checking function in a way that allows us to set the
correct exception syndrome information for exceptions taken
to AArch64 (which may need to distinguish access failures due
to a configurable trap or enable from other kinds of access
failure).
This commit defines the new mechanism but does not move any
of the registers across to use it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
The ARM946 has 8 PRBS (protection region base and size) registers.
Currently we implement these with a CP_ANY reginfo; however this
underdecodes (since there are 16 possible values of CRm but only
8 registers) and we catch the invalid values in the read and
write functions. However this causes issues with migration since
we only migrate the first of a wildcard register set, so we only
migrate c6_region[0]. It also makes it awkward to pull reginfo
access checks out into their own function.
Avoid all these problems by just defining separate reginfo structs
for each of the 8 registers; this also lets us avoid having any
read or write functions and will result in more efficient direct
field accesses from generated code.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Log guest attempts to access unimplemented system registers via
the LOG_UNIMP reporting mechanism (for both the 32 bit and 64 bit
instruction sets). This is particularly useful for debugging
problems where the guest is trying to use a system register that
QEMU doesn't implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Remove the 'struct sr' from ARMCPUState -- it isn't actually used and is
a hangover from the original separate system register implementation used
by the SuSE linux-user-mode-only AArch64 target.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
The SCTLR bits S and R (8 and 9) only exist in ARMv6 and earlier.
In ARMv7 these bits RAZ, and in ARMv8 they are reassigned. Guard
the use of them in check_ap() so that we don't get incorrect results
for ARMv8 CPUs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
The SCTLR is full of bits for enabling or disabling various things, and so
there are many places in the code which check if certain bits are set.
Define some named constants for the SCTLR bits so these checks are easier
to read.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Extend the set of CPUs for which we provide a QEMU_KVM_ARM_TARGET_*
constant to include all the ones currently supported by the kernel
headers we are using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the remaining instructions in the SIMD 3-reg-same
and scalar-3-reg-same groups: FMULX, FRECPS, FRSQRTS, FACGE,
FACGT, FMLA and FMLS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add support for the floating-point pairwise operations
FADDP, FMAXP, FMAXNMP, FMINP and FMINNMP. To do this we use the
code which was previously handling only integer pairwise operations,
and push the integer-specific decode and handling of unallocated
cases up one level in the call tree, so we can also call it from
the floating-point section of the decoder.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
This adds all forms of the SIMD floating point and set instructions:
FCM(GT|GE|EQ|LE|LT)
Most of the heavy lifting is done by either the existing neon helpers or
some new helpers for the 64bit double cases. Most of the code paths are
common although the 2misc versions are a little special as they compare
against zero.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: fixed some minor bugs, added the 2-misc-scalar encoding]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the scalar three different instruction group:
it only has three instructions in it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the SIMD scalar indexed instructions. The encoding
here is nearly identical to the vector indexed grouping, so
we combine the two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the 'long' operations in the vector x indexed
element category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement all the SIMD vector x indexed element instructions
in the subcategory which are not 'long' ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
|
|
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the AArch32 floating-point half-precision to double-
precision conversion VCVTB and VCVTT instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
[PMM: fixed a minor missing-braces style issue]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add the SIMD FNEG and FABS instructions in the SIMD 2-reg-misc group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add the byte-reverse operations REV64, REV32 and REV16 from the
two-reg-misc group.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add the narrowing integer instructions in the 2-reg-misc class.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the 2-reg-misc CNT, NOT and RBIT instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the simple 2-register-misc operations we can share
with the scalar-two-register-misc code. (SUQADD, USQADD, SQABS,
SQNEG also fall into this category, but aren't implemented in
the scalar-2-register case yet either.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add a skeleton decode for the SIMD 2-reg misc group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the simple 64 bit integer operations from the SIMD
scalar 2-register misc group (C3.6.12): the comparisons against
zero, plus ABS and NEG.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the remaining integer instructions in the scalar-three-reg-same
group: SQADD, UQADD, SQSUB, UQSUB, SQSHL, UQSHL, SQRSHL, UQRSHL,
SQDMULH, SQRDMULH.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the instructions in the scalar pairwise group (C3.6.8).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the pairwise integer operations in the 3-reg-same SIMD group:
ADDP, SMAXP, SMINP, UMAXP and UMINP.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the SIMD 3-reg-same instructions where the size == 3 case
is reserved: SHADD, UHADD, SRHADD, URHADD, SHSUB, UHSUB, SMAX,
UMAX, SMIN, UMIN, SABD, UABD, SABA, UABA, MLA, MLS, MUL, PMUL,
SQRDMULH, SQDMULH. (None of these have scalar-3-same versions.)
This completes the non-pairwise integer instructions in this category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the SIMD 3-reg-same instructions SQADD, UQADD,
SQSUB, UQSUB, SSHL, USHL, SQSHl, UQSHL, SRSHL, URSHL,
SQRSHL, UQRSHL; these are all simple calls to existing
Neon helpers. We also enable SSHL, USHL, SRSHL and URSHL
for the 3-reg-same-scalar category (but not the others
because they can have non-size-64 operands and the
scalar_3reg_same function doesn't support that yet.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
This implements a subset of the AdvSIMD shift operations (namely all the
none saturating or narrowing ones). The actual shift generation code
itself is common for both the scalar and vector cases but wrapped with
either vector element iteration or the fp reg access.
The rounding operations need to take special care to correctly reflect
the result of adding rounding bits on high bits as the intermediates do
not truncate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement a simple subset of the SIMD 3-same floating point
operations. This includes a common helper function used for both
scalar and vector ops; FABD is the only currently implemented
shared op.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add some of the integer operations in the SIMD 3-same group:
specifically, the comparisons, addition and subtraction.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add support for the logical operations (ORR, AND, BIC, ORN, EOR, BSL,
BIT and BIF) from the SIMD 3 register same group (C3.6.16).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add top level decode for the A64 SIMD three regs same group
(C3.6.16), splitting it into the pairwise, logical, float and
integer subgroups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the add, sub and compare ops from the SIMD "scalar three same"
group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the absolute-difference instructions in the SIMD
three-different group: SABAL, SABAL2, UABAL, UABAL2, SABDL,
SABDL2, UABDL, UABDL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add support for the multiply-accumulate instructions from the
SIMD three-different instructions group (C3.6.15):
* skeleton decode of unallocated encodings and split of
the group into its three sub-parts
* framework for handling the 64x64->128 widening subpart
* implementation of the multiply-accumulate instructions
SMLAL, SMLAL2, UMLAL, UMLAL2, SMLSL, SMLSL2, UMLSL, UMLSL2,
UMULL, UMULL2, SMULL, SMULL2
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add support for the AArch32 Advanced SIMD VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the AArch32 floating-point VCVTA, VCVTN, VCVTP
and VCVTM instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the AArch32 Advanced SIMD VRINTA, VRINTN, VRINTP
VRINTM and VRINTZ instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This helper sets the rounding mode in the standard_fp_status word to
allow NEON instructions to modify the rounding mode whilst using the
standard FPSCR values for everything else.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the AArch32 Advanced SIMD VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the AArch32 floating-point VRINTX instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the AArch32 floating-point VRINTZ instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for the AArch32 floating-point VRINTR instruction.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add support for AArch32 ARMv8 FP VRINTA, VRINTN, VRINTP and VRINTM
instructions.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
