aboutsummaryrefslogtreecommitdiff
path: root/target-arm
AgeCommit message (Collapse)Author
2015-08-24tcg: Remove tcg_gen_trunc_i64_i32Richard Henderson
Replacing it with tcg_gen_extrl_i64_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-08-13target-arm: Add AArch32 banked register access to secure physical timerPeter Maydell
If EL3 is AArch32, then the secure physical timer is accessed via banking of the registers used for the non-secure physical timer. Implement this banking. Note that the access controls for the AArch32 banked registers remain the same as the physical-timer checks; they are not the same as the controls on the AArch64 secure timer registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1437047249-2357-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-08-13target-arm: Add the AArch64 view of the Secure physical timerPeter Maydell
On CPUs with EL3, there are two physical timers, one for Secure and one for Non-secure. Implement this extra timer and the AArch64 registers which access it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1437047249-2357-2-git-send-email-peter.maydell@linaro.org
2015-08-13target-arm: Add debug check for mismatched cpreg resetsPeter Maydell
It's easy to accidentally define two cpregs which both try to reset the same underlying state field (for instance a clash between an AArch64 EL3 definition and an AArch32 banked register definition). if the two definitions disagree about the reset value then the result is dependent on which one happened to be reached last in the hashtable enumeration. Add a consistency check to detect and assert in these cases: after reset, we run a second pass where we check that the reset operation doesn't change the value of the register. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1436797559-20835-1-git-send-email-peter.maydell@linaro.org
2015-08-13Introduce gic_class_name() instead of repeating conditionPavel Fedin
This small inline returns correct GIC class name depending on whether we use KVM acceleration or not. Avoids duplicating the condition everywhere. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 4f26901be9b844b563673ce3ad08eeedbb7a7132.1438758065.git.p.fedin@samsung.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13target-arm: Add the Hypervisor timerEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1436791864-4582-6-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13target-arm: Pass timeridx as argument to various timer functionsEdgar E. Iglesias
Prepare for adding the Hypervisor timer, no functional change. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1436791864-4582-5-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13target-arm: Rename and move gt_cnt_resetEdgar E. Iglesias
Rename gt_cnt_reset to gt_timer_reset as the function really resets the timers and not the counters. Move the registration from counter regs to timer regs. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1436791864-4582-4-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13target-arm: Add CNTHCTL_EL2Edgar E. Iglesias
Adds control for trapping selected timer and counter accesses to EL2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1436791864-4582-3-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-13target-arm: Add CNTVOFF_EL2Edgar E. Iglesias
Adds support for the virtual timer offset controlled by EL2. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1436791864-4582-2-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-21target-arm: kvm: Differentiate registers based on write-back levelsChristoffer Dall
Some registers like the CNTVCT register should only be written to the kernel as part of machine initialization or on vmload operations, but never during runtime, as this can potentially make time go backwards or create inconsistent time observations between VCPUs. Introduce a list of registers that should not be written back at runtime and check this list on syncing the register state to the KVM state. Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1437046488-10773-1-git-send-email-christoffer.dall@linaro.org [PMM: tweaked a few comments, added the new argument to the stub write_list_to_kvmstate() in target-arm/kvm-stub.c] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-07-15target-arm: Fix broken SCTLR_EL3 resetPeter Maydell
The SCTLR_EL3 cpreg definition was implicitly resetting the register state to 0, which is both wrong and clashes with the reset done via the SCTLR definition (since sctlr[3] is unioned with sctlr_s). This went unnoticed until recently, when an unrelated change (commit a903c449b41f105aa) happened to perturb the order of enumeration through the cpregs hashtable for reset such that the erroneous reset happened after the correct one rather than before it. Fix this by marking SCTLR_EL3 as an alias, so its reset is left up to the AArch32 view. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2015-07-09disas: arm: QOMify target specific disas setupPeter Crosthwaite
Move the target_disas() ARM specifics to the QOM disas_set_info hook and delete the ARM specific code in disas.c. This has the extra advantage of the more fully featured target_disas() implementation now applying to monitor_disas(). Currently, target_disas() has multi-endian, thumb and AArch64 support whereas the existing monitor_disas() support only has vanilla AA32 support. E.G. Running an AA64 linux kernel the following -d in_asm disas happens (taget_disas()): IN: 0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x40000018) 0x0000000040000004: aa1f03e1 mov x1, xzr However before this patch, disasing the same from the monitor: (qemu) xp/i 0x40000000 0x0000000040000000: 580000c0 stmdapl r0, {r6, r7} After this patch: (qemu) xp/i 0x40000000 0x0000000040000000: 580000c0 ldr x0, pc+24 (addr 0x40000018) Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu-exec: Purge all uses of ENV_GET_CPU()Peter Crosthwaite
Remove un-needed usages of ENV_GET_CPU() by converting the APIs to use CPUState pointers and retrieving the env_ptr as minimally needed. Scripted conversion for target-* change: for I in target-*/cpu.h; do sed -i \ 's/\(^int cpu_[^_]*_exec(\)[^ ][^ ]* \*s);$/\1CPUState *cpu);/' \ $I; done Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu: Change cpu_exec_init() arg to cpu, not envPeter Crosthwaite
The callers (most of them in target-foo/cpu.c) to this function all have the cpu pointer handy. Just pass it to avoid an ENV_GET_CPU() from core code (in exec.c). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Anthony Green <green@moxielogic.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-09cpu: Add Error argument to cpu_exec_init()Bharata B Rao
Add an Error argument to cpu_exec_init() to let users collect the error. This is in preparation to change the CPU enumeration logic in cpu_exec_init(). With the new enumeration logic, cpu_exec_init() can fail if cpu_index values corresponding to max_cpus have already been handed out. Since all current callers of cpu_exec_init() are from instance_init, use error_abort Error argument to abort in case of an error. Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2015-07-07crypto: move built-in AES implementation into crypto/Daniel P. Berrange
To prepare for a generic internal cipher API, move the built-in AES implementation into the crypto/ directory Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1435770638-25715-3-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-07-06target-arm: Implement YIELD insn to yield in ARM and Thumb translatorsPeter Maydell
Implement the YIELD instruction in the ARM and Thumb translators to actually yield control back to the top level loop rather than being a simple no-op. (We already do this for A64.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1435672316-3311-3-git-send-email-peter.maydell@linaro.org
2015-07-06target-arm: Split DISAS_YIELD from DISAS_WFEPeter Maydell
Currently we use DISAS_WFE for both WFE and YIELD instructions. This is functionally correct because at the moment both of them are implemented as "yield this CPU back to the top level loop so another CPU has a chance to run". However it's rather confusing that YIELD ends up calling HELPER(wfe), and if we ever want to implement real behaviour for WFE and SEV it's likely to trip us up. Split out the yield codepath to use DISAS_YIELD and a new HELPER(yield) function, and have HELPER(wfe) call HELPER(yield). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1435672316-3311-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2015-07-06target-arm: fix write helper for TLBI ALLE1ISSergey Fedorov
TLBI ALLE1IS is an operation that does invalidate TLB entries on all PEs in the same Inner Sharable domain, not just on the current CPU. So we must use tlbiall_is_write() here. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1435676538-31345-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-26target-arm: A64: Print ELR when taking exceptionsSoren Brinkmann
When taking an exception print the content of the exception link register. This is useful especially for synchronous exceptions because in that case this registers holds the address of the instruction that generated the exception. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Message-id: 1435036655-16132-1-git-send-email-soren.brinkmann@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-26target-arm: default empty semihosting cmdlineLiviu Ionescu
If neither explicit semihosting args nor -kernel are used, make SYS_GET_CMDLINE return an empty string. Signed-off-by: Liviu Ionescu <ilg@livius.net> Message-id: AC7B5AFC-06AE-4FAD-9852-B65708E80E09@livius.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-22Include qapi/qmp/qerror.h exactly where neededMarkus Armbruster
In particular, don't include it into headers. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-19semihosting: add --semihosting-config arg sub-argumentLeon Alrae
Add new "arg" sub-argument to the --semihosting-config allowing the user to pass multiple input arguments separately. It is required for example by UHI semihosting to construct argc and argv. Also, update ARM semihosting to support new option (at the moment it is the only target which cares about arguments). If the semihosting is enabled and no semihosting args have been specified, then fall back to -kernel/-append. The -append string is split on whitespace before initializing semihosting.argv[1..n]; this is different from what QEMU MIPS machines' pseudo-bootloaders do (i.e. argv[1] contains the whole -append), but is more intuitive from UHI user's point of view and Linux kernel just does not care as it concatenates argv[1..n] into single cmdline string anyway. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Message-id: 1434643256-16858-3-git-send-email-leon.alrae@imgtec.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19semihosting: create SemihostingConfig structure and semihost.hLeon Alrae
Remove semihosting_enabled and semihosting_target and replace them with SemihostingConfig structure containing equivalent fields. The structure is defined in vl.c where it is actually set. Also introduce separate header file include/exec/semihost.h allowing to access semihosting config related stuff from target specific semihosting code. Signed-off-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1434643256-16858-2-git-send-email-leon.alrae@imgtec.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Add support for Cortex-R5Peter Crosthwaite
Introduce a CPU model for the Cortex R5 processor. ARMv7 with MPU, and both thumb and ARM div instructions. Also implement dummy ATCM and BTCM. These CPs are defined for R5 but don't have a lot of meaning in QEMU yet. Raz them so the guest can proceed if they are read. The TCM registers will return a size of 0, indicating no TCM. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: efe213163e6800578494aba864ac30329de4d396.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Implement PMSAv7 MPUPeter Crosthwaite
Unified MPU only. Uses ARM architecture major revision to switch between PMSAv5 and v7 when ARM_FEATURE_MPU is set. PMSA v6 remains unsupported and is asserted against. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: dcb03cda6dd754c5cc6a962fa11f25089811e954.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Add registers for PMSAv7Peter Crosthwaite
Define the arm CP registers for PMSAv7 and their accessor functions. RGNR serves as a shared index that indexes into arrays storing the DRBAR, DRSR and DRACR registers. DRBAR and friends have to be VMSDd separately from the CP interface using a new PMSA specific VMSD subsection. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 172cf135fbd8f5cea413c00e71cc1c3cac704744.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm/helper.c: define MPUIR registerPeter Crosthwaite
Define the MPUIR register for MPU supporting ARMv6 and onwards. Currently we only support unified MPU. The size of the unified MPU is defined via the number of "dregions". So just a single config is added to specify this size. (When split MPU is implemented we will add an extra iregions config). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 9f248950b803a08c8b3c978931663182f7e882e7.1434501320.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Do not reset sysregs marked as ALIASSergey Fedorov
cp_reg_reset() is called from g_hash_table_foreach() which does not define a specific ordering of the hash table iteration. Thus doing reset for registers marked as ALIAS would give an ambiguous result when resetvalue is different for original and alias registers. Exit cp_reg_reset() early when passed an alias register. Then clean up alias register definitions from needless resetvalue and resetfn. In particular, this fixes a bug in the handling of the PMCR register, which had different resetvalues for its 32 and 64-bit views. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1434554713-10220-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-19target-arm: Add the Cortex-M4 CPUAurelio C. Remonda
This patch adds the Cortex-M4 CPU. The M4 is basically the same as the M3, the main differences being the DSP instructions and an optional FPU. Only no-FPU cortex-M4 is implemented here, cortex-M4F is not because the core target-arm code doesn't support the M-profile FPU model yet. Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com> Message-id: 1434461850-4104-1-git-send-email-aurelioremonda@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: Correct "preferred return address" for cpreg access exceptionsPeter Maydell
The architecture defines that when taking an exception trying to access a coprocessor register, the "preferred return address" for the exception is the address of the instruction that caused the exception. Correct an off-by-4 error which meant we were returning the address after the instruction for traps which happened because of a failure of a runtime access-check function on an AArch32 register. (Traps caused by translate-time checkable permissions failures had the correct address, as did traps on AArch64 registers.) This fixes https://bugs.launchpad.net/qemu/+bug/1463338 Reported-by: Robert Buhren <robert@robertbuhren.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org
2015-06-15arm: helper: rename get_phys_addr_mpuPeter Crosthwaite
This get_phys_addr is really for pmsav5. Rename it accordingly. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: bf4b019aa87d682a45998105ef8e4d4e97a5e117.1434066412.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15arm: Add has-mpu propertyPeter Crosthwaite
For processors that support MPUs, add a property to de-feature it. This is similar to the implementation of the EL3 feature. The processor definition in init sets ARM_FEATURE_MPU if it can support an MPU. post_init exposes the property, defaulting to true. If cleared by the instantiator, ARM_FEATURE_MPU is then removed at realize time. This is to support R profile processors that may or may-not have an MPU configured. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 632918cc48786e868ea18aa6bd12f70597994cad.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15arm: Implement uniprocessor with MP configPeter Crosthwaite
Add a boolean for indicating uniprocessors with MP extensions. This drives the U bit in MPIDR. Prepares support for Cortex-R5. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: a70a80583df265e0174f01fa1fc92b33ea6d1db5.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15arm: Refactor get_phys_addr FSR return mechanismPeter Crosthwaite
Currently, the return code for get_phys_addr is overloaded for both success/fail and FSR value return. This doesn't handle the case where there is an error with a 0 FSR. This case exists in PMSAv7. So rework get_phys_addr and friends to return a success/failure boolean return code and populate the FSR via a caller provided uint32_t pointer. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: a209e3d8ae00cda55260c970891f520210e26bad.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15arm: helper: Factor out CP regs common to [pv]msaPeter Crosthwaite
V6+ PMSA and VMSA share some common registers that are currently in the VMSA definition block. Split them out into a new def that can be shared to PMSA. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 284db78a43c63c9bfbb60de539672c361bcb6af8.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15arm: Don't add v7mp registers in MPU systemsPeter Crosthwaite
These registers are VMSA specific so they should be conditional on VMSA (i.e. !MPU). Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 7bb8843e45f2635c6b7a583c5bb5da51ed4442a0.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15arm: Do not define TLBTR in PMSA systemsPeter Crosthwaite
If doing a PMSA (MPU) system do not define the VMSA specific TLBTR CP. The def is done separately from VMSA registers group as it is affected by both the OMAP/STRONGARM RW errata and the MIDR backgrounding. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: b03fea3840207edf633f5c9189400c3dd6a28d14.1434066412.git.peter.crosthwaite@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: Add the THUMB_DSP featureAurelio C. Remonda
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of the 85 DSP instructions (these are all Thumb2). This is enabled for all non-M-profile CPUs with Thumb2 support, as the instructions are mandatory for R and A profiles. On M profile they are optional and not present in the Cortex-M3 (though they are in the M4). The effect of this commit is that we will now treat the DSP encodings as illegal instructions on M3, when previously we incorrectly implemented them. Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com> Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com [PMM: added clz/crc32/crc32c and default case to the early-decode switch; minor format/spacing fixups; reworded commit message a bit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: Use the kernel's idea of MPIDR if we're using KVMPavel Fedin
When we're using KVM, the kernel's internal idea of the MPIDR affinity fields must match the values we tell it for the guest vcpu cluster configuration in the device tree. Since at the moment the kernel doesn't support letting userspace tell it the correct affinity fields to use, we must read the kernel's view and reflect that back in the device tree. Signed-off-by: Shlomo Pongratz <shlomo.pongratz@huawei.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Message-id: 02f601d0a1e6$90c7d630$b2578290$@samsung.com [PMM: Use a local #define rather than a global variable for the TCG ARM_CPUS_PER_CLUSTER setting. Tweak a comment. Update the commit message.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: add AArch32 MIDR aliases in ARMv8Sergey Fedorov
According to ARMv8 ARM, there are additional aliases to MIDR system register in AArch32 state. So add them to the list. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1433321048-23793-3-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: Fix REVIDR reset valueSergey Fedorov
According to ARM Cortex-A53/A57 TRM, REVIDR reset value should be zero. So let REVIDR reset value be specified by CPU model and correct it for Cortex-A53/A57. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1433321048-23793-2-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm/kvm64: Add cortex-a53 cpu supportShannon Zhao
Since commit e353102(target-arm: cpu64: Add support for Cortex-A53) has added Cortex-A53 cpu support for target-arm, this patch just enables it for kvm-arm. Here adding XGENE_POTENZA just makes the enum continuous. Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1433207452-4512-2-git-send-email-shannon.zhao@linaro.org [PMM: Don't add the CPU types to cpus_to_try[]; this array only lists old CPUs which were supported in pre-PREFERRED_TARGET kernels] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm/cpu.h: remove pending_exceptionAlex Bennée
This isn't used by any of the code. In fact it looks like it was never used as it came in with ARMv7 support. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1434020015-8868-1-git-send-email-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: use extended address bits from supersection short descriptorSergey Fedorov
Since ARMv7 with LPAE support, a supersection short translation table descriptor has had extended base address fields which hold bits 39:32 of translated address. These fields are IMPDEF in ARMv6 and ARMv7 without LPAE support. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1433235718-30485-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-15target-arm: Handle "extended small page" descriptors correctlyPeter Maydell
The old ARMv5-style page table format includes a kind of second level descriptor named the "extended small page" format, whose primary purpose is to allow specification of the TEX memory attribute bits on a 4K page. This exists on ARMv6 and also (as an implementation extension) on XScale CPUs; it's UNPREDICTABLE on v5. We were mishandling this in two ways: (1) we weren't implementing it for v6 (probably never noticed because Linux will use the new-style v6 page table format there) (2) we were not correctly setting the page_size, which is 4K, not 1K The latter bug went unnoticed for years because the only thing which the page_size affects is which TLB entries get flushed when the guest does a TLB invalidate on an address in the page, and prior to commit 2f0d8631b7 we were doing a full TLB flush very frequently due to Linux's habit of writing the SCTLR pointlessly a lot. (We can assume that after commit 2f0d8631b7 the bug went unnoticed for a year because nobody's actually using the Zaurus/XScale emulation...) Report the correct page size for these descriptors, and permit them on ARMv6 CPUs. This fixes a problem where a kernel image for Zaurus can boot the kernel OK but gets random segfaults when it tries to run userspace programs. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1432844085-16441-1-git-send-email-peter.maydell@linaro.org
2015-06-12migration: Use normal VMStateDescriptions for SubsectionsJuan Quintela
We create optional sections with this patch. But we already have optional subsections. Instead of having two mechanism that do the same, we can just generalize it. For subsections we just change: - Add a needed function to VMStateDescription - Remove VMStateSubsection (after removal of the needed function it is just a VMStateDescription) - Adjust the whole tree, moving the needed function to the corresponding VMStateDescription Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-06-02target-arm: Remove v8_ prefix from names of non-v8-specific cpreg arraysPeter Maydell
The ARMCPRegInfo arrays v8_el3_no_el2_cp_reginfo and v8_el2_cp_reginfo are actually used on non-v8 CPUs as well. Remove the incorrect v8_ prefix from their names. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1433182716-6400-1-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 12:34:14 +0000