aboutsummaryrefslogtreecommitdiff
path: root/target-arm
AgeCommit message (Collapse)Author
2016-02-11target-arm: Implement checking of fired watchpointSergey Fedorov
ARM stops before access to a location covered by watchpoint. Also, QEMU watchpoint fire is not necessarily an architectural watchpoint match. Unfortunately, that is hardly possible to ignore a fired watchpoint in debug exception handler. So move watchpoint check from debug exception handler to the dedicated watchpoint checking callback. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454256948-10485-3-git-send-email-serge.fdrv@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-11target-arm: Fix IL bit reported for Thumb VFP and Neon trapsPeter Maydell
All Thumb Neon and VFP instructions are 32 bits, so the IL bit in the syndrome register should be set. Pass false to the syn_* function's is_16bit argument rather than s->thumb so we report the correct IL bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454683067-16001-4-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Fix IL bit reported for Thumb coprocessor trapsPeter Maydell
All Thumb coprocessor instructions are 32 bits, so the IL bit in the syndrome register should be set. Pass false to the syn_* function's is_16bit argument rather than s->thumb so we report the correct IL bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454683067-16001-3-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Correct misleading 'is_thumb' syn_* parameter namesPeter Maydell
In syndrome register values, the IL bit indicates the instruction length, and is 1 for 4-byte instructions and 0 for 2-byte instructions. All A64 and A32 instructions are 4-byte, but Thumb instructions may be either 2 or 4 bytes long. Unfortunately we named the parameter to the syn_* functions for constructing syndromes "is_thumb", which falsely implies that it should be set for all Thumb instructions, rather than only the 16-bit ones. Fix the functions to name the parameter 'is_16bit' instead. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454683067-16001-2-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Enable EL3 for Cortex-A53 and Cortex-A57Peter Maydell
Enable EL3 support for our Cortex-A53 and Cortex-A57 CPU models. We have enough implemented now to be able to run real world code at least to some extent (I can boot ARM Trusted Firmware to the point where it pulls in OP-TEE and then falls over because it doesn't have a UEFI image it can chain to). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454506721-11843-8-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Implement NSACR trapping behaviourPeter Maydell
Implement some corner cases of the behaviour of the NSACR register on ARMv8: * if EL3 is AArch64 then accessing the NSACR from Secure EL1 with AArch32 should trap to EL3 * if EL3 is not present or is AArch64 then reads from NS EL1 and NS EL2 return constant 0xc00 It would in theory be possible to implement all these with a single reginfo definition, but for clarity we use three separate definitions for the three cases and install the right one based on the CPU feature flags. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1454506721-11843-7-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Add isread parameter to CPAccessFnsPeter Maydell
System registers might have access requirements which need to be described via a CPAccessFn and which differ for reads and writes. For this to be possible we need to pass the access function a parameter to tell it whether the access being checked is a read or a write. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454506721-11843-6-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Update arm_generate_debug_exceptions() to handle EL2/EL3Peter Maydell
The arm_generate_debug_exceptions() function as originally implemented assumes no EL2 or EL3. Since we now have much more of an implementation of those now, fix this assumption. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454506721-11843-5-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Use access_trap_aa32s_el1() for SCR and MVBARPeter Maydell
The registers MVBAR and SCR should have the behaviour of trapping to EL3 if accessed from Secure EL1, but we were incorrectly implementing them to UNDEF (which would trap to EL1). Fix this by using the new access_trap_aa32s_el1() access function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1454506721-11843-4-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Implement MDCR_EL3 and SDCRPeter Maydell
Implement the MDCR_EL3 register (which is SDCR for AArch32). For the moment we implement it as reads-as-written. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1454506721-11843-3-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Fix typo in comment in arm_is_secure_below_el3()Peter Maydell
Fix a typo where "EL2" was written but "EL3" intended. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454506721-11843-2-git-send-email-peter.maydell@linaro.org
2016-02-09tcg: Change tcg_global_mem_new_* to take a TCGv_ptrRichard Henderson
Thus, use cpu_env as the parameter, not TCG_AREG0 directly. Update all uses in the translators. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Remove lingering references to gen_opc_bufRichard Henderson
Three in comments and one in code in the stub tcg_liveness_analysis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-04Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20160203' into staging target-arm queue: * virt-acpi-build: add always-on property for timer * various fixes for EL2 and EL3 behaviour * arm: virt-acpi: each MADT.GICC entry as enabled unconditionally * target-arm: Don't report presence of EL2 if it doesn't exist * raspi: add raspberry pi 2 machine # gpg: Signature made Wed 03 Feb 2016 18:58:02 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" * remotes/pmaydell/tags/pull-target-arm-20160203: raspi: add raspberry pi 2 machine arm/boot: move highbank secure board setup code to common routine bcm2836: add bcm2836 SoC device bcm2836_control: add bcm2836 ARM control logic bcm2835_peripherals: add rollup device for bcm2835 peripherals bcm2835_ic: add bcm2835 interrupt controller bcm2835_property: add bcm2835 property channel bcm2835_mbox: add BCM2835 mailboxes target-arm: Don't report presence of EL2 if it doesn't exist libvixl: Avoid std::abs() of 64-bit type arm: virt-acpi: each MADT.GICC entry as enabled unconditionally target-arm: Implement the S2 MMU inputsize > pamax check target-arm: Rename check_s2_startlevel to check_s2_mmu_setup target-arm: Apply S2 MMU startlevel table size check to AArch64 hw/arm: Setup EL1 and EL2 in AArch64 mode for 64bit Linux boots target-arm: Make various system registers visible to EL3 virt-acpi-build: add always-on property for timer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03target-arm: Don't report presence of EL2 if it doesn't existPeter Maydell
We already modify the processor feature bits to not report EL3 support to the guest if EL3 isn't enabled for the CPU we're emulating. Add similar support for not reporting EL2 unless it is enabled. This is necessary because real world guest code running at EL3 (trusted firmware or bootloaders) will query the ID registers to determine whether it should start a guest Linux kernel in EL2 or EL3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454437242-10262-1-git-send-email-peter.maydell@linaro.org
2016-02-03target-arm: Implement the S2 MMU inputsize > pamax checkEdgar E. Iglesias
Implement the inputsize > pamax check for Stage 2 translations. This is CONSTRAINED UNPREDICTABLE and we choose to fault. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1453932970-14576-4-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03target-arm: Rename check_s2_startlevel to check_s2_mmu_setupEdgar E. Iglesias
Rename check_s2_startlevel to check_s2_mmu_setup in preparation for additional checks. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1453932970-14576-3-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03target-arm: Apply S2 MMU startlevel table size check to AArch64Edgar E. Iglesias
The S2 starting level table size check applies to both AArch32 and AArch64. Move it to common code. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1453932970-14576-2-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-03target-arm: Make various system registers visible to EL3Peter Maydell
The AArch64 system registers DACR32_EL2, IFSR32_EL2, SPSR_IRQ, SPSR_ABT, SPSR_UND and SPSR_FIQ are visible and fully functional from EL3 even if the CPU has no EL2 (unlike some others which are RES0 from EL3 in that configuration). Move them from el2_cp_reginfo[] to v8_cp_reginfo[] so they are always present. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1453227802-9991-1-git-send-email-peter.maydell@linaro.org
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-29arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1453832250-766-13-git-send-email-peter.maydell@linaro.org
2016-01-27gdb: provide the name of the architecture in the target.xmlDavid Hildenbrand
This patch provides the name of the architecture in the target.xml if available. This allows the remote gdb to detect the target architecture on its own - so there is no need to specify it manually (e.g. if gdb is started without a binary) using "set arch *arch_name*". The name of the architecture is provided by a callback that can be implemented by all architectures. The arm implementation has special handling for iwmmxt and returns arm otherwise. This can be extended if necessary. Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> [rework to use a callback] Message-Id: <1449144881-130935-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-01-21target-arm: Implement FPEXC32_EL2 system registerPeter Maydell
The AArch64 FPEXC32_EL2 system register is visible at EL2 and EL3, and allows those exception levels to read and write the FPEXC register for a lower exception level that is using AArch32. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1453132414-8127-1-git-send-email-peter.maydell@linaro.org
2016-01-21target-arm: ignore ELR_ELx[1] for exception return to 32-bit ARM modePeter Maydell
The architecture requires that for an exception return to AArch32 the low bits of ELR_ELx are ignored when the PC is set from them: * if returning to Thumb mode, ignore ELR_ELx[0] * if returning to ARM mode, ignore ELR_ELx[1:0] We were only squashing bit 0; also squash bit 1 if the SPSR T bit indicates this is a return to ARM code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Implement remaining illegal return event checksPeter Maydell
We already implement almost all the checks for the illegal return events from AArch64 state described in the ARM ARM section D1.11.2. Add the two missing ones: * return to EL2 when EL3 is implemented and SCR_EL3.NS is 0 * return to Non-secure EL1 when EL2 is implemented and HCR_EL2.TGE is 1 (We don't implement external debug, so the case of "debug state exit from EL0 using AArch64 state to EL0 using AArch32 state" doesn't apply for QEMU.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Handle exception return from AArch64 to non-EL0 AArch32Peter Maydell
Remove the assumptions that the AArch64 exception return code was making about a return to AArch32 always being a return to EL0. This includes pulling out the illegal-SPSR checks so we can apply them for return to 32 bit as well as return to 64-bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Fix wrong AArch64 entry offset for EL2/EL3 targetPeter Maydell
The entry offset when taking an exception to AArch64 from a lower exception level may be 0x400 or 0x600. 0x400 is used if the implemented exception level immediately lower than the target level is using AArch64, and 0x600 if it is using AArch32. We were incorrectly implementing this as checking the exception level that the exception was taken from. (The two can be different if for example we take an exception from EL0 to AArch64 EL3; we should in this case be checking EL2 if EL2 is implemented, and EL1 if EL2 is not implemented.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Pull semihosting handling out to arm_cpu_do_interrupt()Peter Maydell
Handling of semihosting calls should depend on the register width of the calling code, not on that of any higher exception level, so we need to identify and handle semihosting calls before we decide whether to deliver the exception as an entry to AArch32 or AArch64. (EXCP_SEMIHOST is also an "internal exception" so it has no target exception level in the first place.) This will allow AArch32 EL1 code to use semihosting calls when running under an AArch64 EL3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-21target-arm: Use a single entry point for AArch64 and AArch32 exceptionsPeter Maydell
If EL2 or EL3 is present on an AArch64 CPU, then exceptions can be taken to an exception level which is running AArch32 (if only EL0 and EL1 are present then EL1 must be AArch64 and all exceptions are taken to AArch64). To support this we need to have a single implementation of the CPU do_interrupt() method which can handle both 32 and 64 bit exception entry. Pull the common parts of aarch64_cpu_do_interrupt() and arm_cpu_do_interrupt() out into a new function which calls either the AArch32 or AArch64 specific entry code once it has worked out which one is needed. We temporarily special-case the handling of EXCP_SEMIHOST to avoid an assertion in arm_el_is_aa64(); the next patch will pull all the semihosting handling out to the arm_cpu_do_interrupt() level (since semihosting semantics depend on the register width of the calling code, not on that of any higher EL). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Move aarch64_cpu_do_interrupt() to helper.cPeter Maydell
Move the aarch64_cpu_do_interrupt() function to helper.c. We want to be able to call this from code that isn't AArch64-only, and the move allows us to avoid awkward #ifdeffery at the callsite. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Properly support EL2 and EL3 in arm_el_is_aa64()Peter Maydell
Support EL2 and EL3 in arm_el_is_aa64() by implementing the logic for checking the SCR_EL3 and HCR_EL2 register-width bits as appropriate to determine the register width of lower exception levels. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Support multiple address spaces in page table walksPeter Maydell
If we have a secure address space, use it in page table walks: when doing the physical accesses to read descriptors, make them through the correct address space. (The descriptor reads are the only direct physical accesses made in target-arm/ for CPUs which might have TrustZone.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Implement cpu_get_phys_page_attrs_debugPeter Maydell
Implement cpu_get_phys_page_attrs_debug instead of cpu_get_phys_page_debug. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Implement asidx_from_attrsPeter Maydell
Implement the asidx_from_attrs CPU method to return the Secure or NonSecure address space as appropriate. (The function is inline so we can use it directly in target-arm code to be added in later patches.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-21target-arm: Add QOM property for Secure memory regionPeter Maydell
Add QOM property to the ARM CPU which boards can use to tell us what memory region to use for secure accesses. Nonsecure accesses go via the memory region specified with the base CPU class 'memory' property. By default, if no secure region is specified it is the same as the nonsecure region, and if no nonsecure region is specified we will use address_space_memory. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-01-18target-arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
2016-01-15target-arm: dump-guest-memory: add vfp notes for armAndrew Jones
gdb won't actually dump these with 'info all-registers' since it first tries to confirm that it should by checking the VFP hwcap in the .auxv note. Well, we don't generate an .auxv note. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1452542185-10914-9-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15target-arm: dump-guest-memory: add prfpreg notes for aarch64Andrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1452542185-10914-7-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15target-arm: support QMP dump-guest-memoryAndrew Jones
Add the support needed for creating prstatus elf notes. This allows us to use QMP dump-guest-memory. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1452542185-10914-6-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: moved setting of cpu::write_elf64_note inside !CONFIG_USER_ONLY ifdef to avoid compile failure for linux-user build] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-15target-arm: Use the right MMU index in arm_regime_using_lpae_formatAlvise Rigo
arm_regime_using_lpae_format checks whether the LPAE extension is used for stage 1 translation regimes. MMU indexes not exclusively of a stage 1 regime won't work with this method. In case of ARMMMUIdx_S12NSE0 or ARMMMUIdx_S12NSE1, offset these values by ARMMMUIdx_S1NSE0 to get the right index indicating a stage 1 translation regime. Rename also the function to arm_s1_regime_using_lpae_format and update the comments to reflect the change. Signed-off-by: Alvise Rigo <a.rigo@virtualopensystems.com> Message-id: 1452854262-19550-1-git-send-email-a.rigo@virtualopensystems.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-01-13error: Strip trailing '\n' from error string arguments (again)Markus Armbruster
Commit 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. Tracked down with the Coccinelle semantic patch from commit 312fd5f. Cc: Fam Zheng <famz@redhat.com> Cc: Peter Crosthwaite <crosthwaitepeter@gmail.com> Cc: Bharata B Rao <bharata@linux.vnet.ibm.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: David Hildenbrand <dahi@linux.vnet.ibm.com> Cc: Jason J. Herne <jjherne@linux.vnet.ibm.com> Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Changchun Ouyang <changchun.ouyang@intel.com> Cc: zhanghailiang <zhang.zhanghailiang@huawei.com> Cc: Pavel Fedin <p.fedin@samsung.com> Signed-off-by: Markus Armbruster <armbru@pond.sub.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Acked-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1450452927-8346-17-git-send-email-armbru@redhat.com>
2015-12-17kvm: x86: add support for KVM_CAP_SPLIT_IRQCHIPPaolo Bonzini
This patch adds support for split IRQ chip mode. When KVM_CAP_SPLIT_IRQCHIP is enabled: 1.) The PIC, PIT, and IOAPIC are implemented in userspace while the LAPIC is implemented by KVM. 2.) The software IOAPIC delivers interrupts to the KVM LAPIC via kvm_set_irq. Interrupt delivery is configured via the MSI routing table, for which routes are reserved in target-i386/kvm.c then configured in hw/intc/ioapic.c 3.) KVM delivers IOAPIC EOIs via a new exit KVM_EXIT_IOAPIC_EOI, which is handled in target-i386/kvm.c and relayed to the software IOAPIC via ioapic_eoi_broadcast. Signed-off-by: Matt Gingell <gingell@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-12-17target-arm: kvm - re-inject guest debug exceptionsAlex Bennée
If we can't find details for the debug exception in our debug state then we can assume the exception is due to debugging inside the guest. To inject the exception into the guest state we re-use the TCG exception code (do_interrupt). However while guest debugging is in effect we currently can't handle the guest using single step as we will keep trapping to back to userspace. GDB makes heavy use of single-step behind the scenes which effectively means the guest's ability to debug itself is disabled while it is being debugged. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1449599553-24713-6-git-send-email-alex.bennee@linaro.org [PMM: Fixed a few typos in comments and commit message] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17target-arm: kvm - add support for HW assisted debugAlex Bennée
This adds basic support for HW assisted debug. The ioctl interface to KVM allows us to pass an implementation defined number of break and watch point registers. When KVM_GUESTDBG_USE_HW is specified these debug registers will be installed in place on the world switch into the guest. The hardware is actually capable of more advanced matching but it is unclear if this expressiveness is available via the gdbstub protocol. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1449599553-24713-5-git-send-email-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17target-arm: kvm - support for single stepAlex Bennée
This adds support for single-step. There isn't much to do on the QEMU side as after we set-up the request for single step via the debug ioctl it is all handled within the kernel. The actual setting of the KVM_GUESTDBG_SINGLESTEP flag is already in the common code. If the kernel doesn't support guest debug the ioctl will simply error. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1449599553-24713-4-git-send-email-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17target-arm: kvm - implement software breakpointsAlex Bennée
These don't involve messing around with debug registers, just setting the breakpoint instruction in memory. GDB will not use this mechanism if it can't access the memory to write the breakpoint. All the kernel has to do is ensure the hypervisor traps the breakpoint exceptions and returns to userspace. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1449599553-24713-3-git-send-email-alex.bennee@linaro.org [PMM: Fixed typo in comment] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17target-arm: kvm64 - introduce kvm_arm_init_debug()Alex Bennée
As we haven't always had guest debug support we need to probe for it. Additionally we don't do this in the start-up capability code so we don't fall over on old kernels. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1449599553-24713-2-git-send-email-alex.bennee@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17target-arm: Fix and improve AA32 singlestep translation completion codeSergey Fedorov
The AArch32 translation completion code for singlestep enabled/active case was a way more confusing and too repetitive then it needs to be. Probably that was the cause for a bug to be introduced into it at some point. The bug was that SWI/HVC/SMC exception would be generated in condition-failed instruction code path whereas it shouldn't. This patch rewrites the code in a way similar to the non-singlestep case. In the condition-passed/unconditional instruction code path we need to: - Write the condexec bits back to the CPU state - Advance the singlestep state machine and generate a corresponding exception in case of SWI/HVC/SMC - Write the PC back to the CPU state if it hasn't already been written and generate an appropriate singlestep exception otherwise In the condition-failed instruction code path we need to: - Set a TCG label to jump to it if the condition is failed - Write the condexec bits back to the CPU state - Write the PC back to the CPU state since it hasn't been written in this case - Generate an appropriate singlestep exception Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1448474560-22475-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17target-arm: raise exception on misaligned LDREX operandsAndrew Baumann
Qemu does not generally perform alignment checks. However, the ARM ARM requires implementation of alignment exceptions for a number of cases including LDREX, and Windows-on-ARM relies on this. This change adds plumbing to enable alignment checks on loads using MO_ALIGN, a do_unaligned_access hook to raise the exception (data abort), and uses the new aligned loads in LDREX (for all but single-byte loads). Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1449167808-5656-1-git-send-email-Andrew.Baumann@microsoft.com [PMM: set WnR bits in syndrome and FSR as appropriate] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-24target-arm/translate-a64.c: Correct unallocated checks for ldst_exclPeter Maydell
The checks for the unallocated encodings in the ldst_excl group (exclusives and load-acquire/store-release) were not correct. This error meant that in turn we ended up with code attempting to handle the non-existent case of "non-exclusive load-acquire/store-release pair". Delete that broken and now unreachable code. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-19 06:34:53 +0000