aboutsummaryrefslogtreecommitdiff
path: root/target-arm
AgeCommit message (Collapse)Author
2014-08-19arm: cortex-a9: Fix cache-line size and associativityPeter Crosthwaite
For A9, The cache associativity is 4 and the lines size is 32B. Self identify in CCSIDR accordingly. Cache size remains at 16k. QEMU doesn't emulate caches, but we should still report the correct cache-line size to the guest. Some guests (like u-boot) complain if the cache-line size mismatches a requested flush or invalidate operation. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1de6bd40155a1d2f2e93e24b1b1d1d677a432641.1408346233.git.peter.crosthwaite@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19arm/virt: Use PSCI v0.2 function IDs in the DT when KVM uses PSCI v0.2Christoffer Dall
The current code supplies the PSCI v0.1 function IDs in the DT even when KVM uses PSCI v0.2. This will break guest kernels that only support PSCI v0.1 as they will use the IDs provided in the DT. Guest kernels with PSCI v0.2 support are not affected by this patch, because they ignore the function IDs in the device tree and rely on the architecture definition. Define QEMU versions of the constants and check that they correspond to the Linux defines on Linux build hosts. After this patch, both guest kernels with PSCI v0.1 support and guest kernels with PSCI v0.2 should work. Tested on TC2 for 32-bit and APM Mustang for 64-bit (aarch64 guest only). Both cases tested with 3.14 and linus/master and verified I could bring up 2 cpus with both guest kernels. Also tested 32-bit with a 3.14 host kernel with only PSCI v0.1 and both guests booted here as well. Cc: qemu-stable@nongnu.org Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19target-arm: Rename QEMU PSCI v0.1 definitionsChristoffer Dall
The function IDs for PSCI v0.1 are exported by KVM and defined as KVM_PSCI_FN_<something>. To build using these defines in non-KVM code, QEMU defines these IDs locally and check their correctness against the KVM headers when those are available. However, the naming scheme used for QEMU (almost) clashes with the PSCI v0.2 definitions from Linux so to avoid unfortunate naming when we introduce local PSCI v0.2 defines, rename the current local defines with QEMU_ prependend and clearly identify the PSCI version as v0.1 in the defines. Cc: qemu-stable@nongnu.org Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-19target-arm: Implement MDSCR_EL1 as having statePeter Maydell
Now that all the new code to support single-stepping is in place, wire up the guest-visible MDSCR_EL1, so the guest can enable single-stepping. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Implement ARMv8 single-stepping for AArch32 codePeter Maydell
ARMv8 single-stepping requires the exception level that controls the single-stepping to be in AArch64 execution state, but the code being stepped may be in AArch64 or AArch32. Implement the necessary support code for single-stepping AArch32 code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Implement ARMv8 single-step handling for A64 codePeter Maydell
Implement ARMv8 software single-step handling for A64 code: correctly update the single-step state machine and generate debug exceptions when stepping A64 code. This patch has no behavioural change since MDSCR_EL1.SS can't be set by the guest yet. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: A64: Avoid duplicate exit_tb(0) in non-linked goto_tbPeter Maydell
If gen_goto_tb() decides not to link the two TBs, then the fallback path generates unnecessary code: * if singlestep is enabled then we generate unreachable code after the gen_exception_internal(EXCP_DEBUG) * if singlestep is disabled then we will generate exit_tb(0) twice, once in gen_goto_tb() and once coming out of the main loop with is_jmp set to DISAS_JUMP Correct these deficiencies by only emitting exit_tb() in the non-singlestep case, in which case we can use DISAS_TB_JUMP to suppress the main-loop exit_tb(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Set PSTATE.SS correctly on exception return from AArch64Peter Maydell
Set the PSTATE.SS bit correctly on exception returns from AArch64, as required by the debug single-step functionality. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Correctly handle PSTATE.SS when taking exception to AArch32Peter Maydell
When an exception is taken to AArch32, we must clear the PSTATE.SS bit for the exception handler, and must also ensure that the SS bit is not set in the value saved to SPSR_<mode>. Achieve both of these aims by clearing the bit in uncached_cpsr before saving it to the SPSR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Don't allow AArch32 to access RES0 CPSR bitsPeter Maydell
The CPSR has a new-in-v8 execution state bit (IL), and also some state which has effects in AArch32 but appears only in the SPSR format (SS) but is RES0 in the CPSR. Add the IL bit to CPSR_EXEC, and enforce that guest direct reads and writes to CPSR can't read or write the RES0 bits, so the guest can't get at the SS bit which we store in uncached_cpsr. This includes not permitting exception returns to copy reserved bits from an SPSR into CPSR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Adjust debug ID registers per-CPUPeter Maydell
Allow each CPU type to specify the value for the debug ID registers, by putting them in the ARMCPU struct, and use the resulting information to only expose the correct number of watchpoint and breakpoint registers for the CPU. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Provide both 32 and 64 bit versions of debug registersPeter Maydell
Bring the 32 bit and 64 bit views of the debug registers into line by providing the same set of registers in both cases. (This still isn't a complete set, but it is consistent.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Allow STATE_BOTH reginfo descriptions for more than cp14Peter Maydell
Currently the STATE_BOTH shorthand for allowing a single reginfo struct to define handling for both AArch32 and AArch64 views of a register only permits this where the AArch32 view is in cp15. It turns out that the debug registers in cp14 also have neatly lined up encodings; allow these also to share reginfo structs by permitting a STATE_BOTH reginfo to specify the .cp field (and continue to default to 15 if it is not specified). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Collect up the debug cp register definitionsPeter Maydell
At the moment we have a mixed set of mostly dummy register definitions for various debug related registers which have been added piecemeal in order to get Linux kernels to boot. In preparation for actually implementing debug support, bring them all together into one place. This commit doesn't change behaviour: we still expose exactly the same registers and behaviour to the guest in all configurations. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-08-19target-arm: Fix return address for A64 BRK instructionsPeter Maydell
When we take an exception resulting from a BRK instruction, the architecture requires that the "preferred return address" reported to the exception handler is the address of the BRK itself, not the following instruction (like undefined insns, and in contrast with SVC, HVC and SMC). Follow this, rather than incorrectly reporting the address of the following insn. (We do get this correct for the A32/T32 BKPT insns.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-stable@nongnu.org
2014-08-12trace: [tcg] Include TCG-tracing header on all targetsLluís Vilanova
Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-08-04target-arm: A64: fix TLB flush instructionsAlex Bennée
According to the ARM ARM we weren't correctly flushing the TLB entries where bits 63:56 didn't match bit 55 of the virtual address. This exposed a problem when we switched QEMU's internal TARGET_PAGE_BITS to 12 for aarch64. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1406733627-24255-3-git-send-email-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: don't hardcode mask values in arm_cpu_handle_mmu_faultAlex Bennée
Otherwise we break quickly when we change TARGET_PAGE_SIZE. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1406733627-24255-2-git-send-email-alex.bennee@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Fix bit test in sp_el0_accessStefan Weil
Static code analyzers complain about a dubious & operation used for a boolean value. The code does not test the PSTATE_SP bit as it should. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1406359601-25583-1-git-send-email-sw@weilnetz.de Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Add FAR_EL2 and 3Edgar E. Iglesias
Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1402994746-8328-7-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Add ESR_EL2 and 3Edgar E. Iglesias
Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1402994746-8328-6-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: Make far_el1 an arrayEdgar E. Iglesias
No functional change. Prepares for future additions of the EL2 and 3 versions of this reg. Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1402994746-8328-5-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: A64: Respect SPSEL when taking exceptionsEdgar E. Iglesias
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1402994746-8328-4-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: A64: Respect SPSEL in ERET SP restoreEdgar E. Iglesias
Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1402994746-8328-3-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-08-04target-arm: A64: Break out aarch64_save/restore_spEdgar E. Iglesias
Break out code to save/restore AArch64 SP into functions. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Greg Bellows <greg.bellows@linaro.org> Message-id: 1402994746-8328-2-git-send-email-edgar.iglesias@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-07-08target-arm: Implement vCPU reset via KVM_ARM_VCPU_INIT for 32-bit CPUsPeter Maydell
Implement kvm_arm_vcpu_init() as a simple call to arm_arm_vcpu_init() (which uses the KVM_ARM_VCPU_INIT vcpu ioctl to tell the kernel to re-initialize the vCPU), rather than via the complicated code which saves a copy of the register state on first init and then writes it back to the kernel. This is much simpler and brings the 32-bit KVM code into line with the 64-bit code. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1403802973-20841-1-git-send-email-peter.maydell@linaro.org
2014-06-24Fix new typos (found by codespell)Stefan Weil
* accomodate -> accommodate * aquiring -> acquiring * beacuse -> because * loosing -> losing * prefering -> preferring * threshhold -> threshold Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-19target-arm: Introduce per-CPU field for PSCI versionPranavkumar Sawargaonkar
We require to know the PSCI version available to given CPU at potentially many places. Currently, we need to know PSCI version when generating DTB for virt machine. This patch introduce per-CPU 32bit field representing the PSCI version available to the CPU. The encoding of this 32bit field is same as described in PSCI v0.2 spec. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-8-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm: Implement kvm_arch_reset_vcpu() for KVM ARM64Pranavkumar Sawargaonkar
To implement kvm_arch_reset_vcpu(), we simply re-init the VCPU using kvm_arm_vcpu_init() so that all registers of VCPU are set to their reset values by in-kernel KVM code. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-7-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm: Enable KVM_ARM_VCPU_PSCI_0_2 feature when possiblePranavkumar Sawargaonkar
Latest linux kernel supports in-kernel emulation of PSCI v0.2 but to enable it we need to select KVM_ARM_VCPU_PSCI_0_2 feature using KVM_ARM_VCPU_INIT ioctl. Also, we can use KVM_ARM_VCPU_PSCI_0_2 feature for VCPU only when linux kernel has KVM_CAP_ARM_PSCI_0_2 capability. This patch updates kvm_arch_init_vcpu() to enable KVM_ARM_VCPU_PSCI_0_2 feature for VCPU when KVM ARM/ARM64 has KVM_CAP_ARM_PSCI_0_2 capability. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-6-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64Pranavkumar Sawargaonkar
Introduce a common kvm_arm_vcpu_init() for doing KVM_ARM_VCPU_INIT ioctl in KVM ARM and KVM ARM64. This also helps us factor-out few common code lines from kvm_arch_init_vcpu() for KVM ARM/ARM64. Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@linaro.org> Signed-off-by: Anup Patel <anup.patel@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1402901605-24551-5-git-send-email-pranavkumar@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-19target-arm/translate-a64.c: Fix dead ?: in handle_simd_shift_fpint_conv()Peter Maydell
In handle_simd_shift_fpint_conv(), the combination of is_double == true, is_scalar == false and is_q == false is an unallocated encoding; the 'both parts false' case of the nested ?: expression for calculating maxpass is therefore unreachable and can be removed. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1402171881-14343-4-git-send-email-peter.maydell@linaro.org
2014-06-19target-arm/translate-a64.c: Remove dead ?: in disas_simd_3same_int()Peter Maydell
In disas_simd_3same_int(), none of the instructions permit is_q to be false with size == 3 (this would be a vector operation with a one-element vector, and the instruction set encodes those as scalar operations). Replace the always-true ?: check with an assert. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1402171881-14343-3-git-send-email-peter.maydell@linaro.org
2014-06-19target-arm: Add ULL suffix to calculation of page sizePeter Maydell
The maximum block size for AArch64 address translation is 2GB. This means that we need a ULL suffix on our shift to avoid shifting into the sign bit of a signed 32 bit integer. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1402171881-14343-2-git-send-email-peter.maydell@linaro.org
2014-06-19target-arm: implement PD0/PD1 bits for TTBCRFabian Aggeler
Corrected handling of writes to TTBCR for ARMv8 (previously UNK/SBZP bits are not RES0) and ARMv7 (new bits PD0/PD1 for CPUs with Security Extensions). Bits PD0/PD1 are now respected in get_phys_addr_v6/v5() and get_level1_table_address. Signed-off-by: Fabian Aggeler <aggelerf@ethz.ch> Message-id: 1402409556-18574-1-git-send-email-aggelerf@ethz.ch Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-16target-arm: Use Common Tables in AES InstructionsTom Musta
This patch refactors the ARM cryptographic instructions to use the (newly) added common tables from include/qemu/aes.h. Signed-off-by: Tom Musta <tommusta@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Alexander Graf <agraf@suse.de>
2014-06-09target-arm: Delete unused iwmmxt_msadb helperPeter Maydell
The iwmmxt_msadb helper and its corresponding gen function are unused; delete them. (This function appears to have never been used right back to the initial implementation of iwMMXt; it is identical to iwmmxt_madduq, and is presumably an accidental remnant from the initial development.) Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401822125-1822-1-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: Fix errors in writes to generic timer control registersPeter Maydell
The code for handling writes to the generic timer control registers had several bugs: * ISTATUS (bit 2) is read-only but we forced it to zero on any write * the check for "was IMASK (bit 1) toggled?" incorrectly used '&' where it should be '^' * the handling of IMASK was inverted: we should set the IRQ if ISTATUS is set and IMASK is clear, not if both are set The combination of these bugs meant that when running a Linux guest that uses the generic timers we would fairly quickly end up either forgetting that the timer output should be asserted, or failing to set the IRQ when the timer was unmasked. The result is that the guest never gets any more timer interrupts. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401803208-1281-1-git-send-email-peter.maydell@linaro.org Cc: qemu-stable@nongnu.org
2014-06-09target-arm: A64: Implement two-register SHA instructionsPeter Maydell
Implement the two-register SHA instruction group from the optional Crypto Extensions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-10-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A64: Implement 3-register SHA instructionsPeter Maydell
Implement the 3-register SHA instruction group from the optional Crypto Extensions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-9-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A64: Implement AES instructionsPeter Maydell
Implement the AES instructions from the optional Crypto Extensions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-8-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A32/T32: Mask CRC value in calling code, not helperPeter Maydell
Bring the 32-bit CRC helper functions into line with the A64 ones, by masking the high bytes of the value in the calling code rather than the helper. This is more efficient since we can determine the mask at translation time. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-7-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A64: Implement CRC instructionsPeter Maydell
Implement the optional A64 CRC instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-6-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: VFPv4 implies half-precision extensionPeter Maydell
VFPv4 implies the presence of the half-precision floating point extension (which is optional in VFPv3). Add this implied rule to arm_cpu_realizefn() and remove some no-longer-needed explicit setting of the bit in initfns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-5-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: Clean up handling of ARMv8 optional feature bitsPeter Maydell
CRC and crypto are both optional v8 extensions, so FEATURE_V8 should not imply them. Instead we should set these bits in the initfns for the 32-bit and 64-bit "cpu any" and for the Cortex-A57. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-4-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: Remove unnecessary setting of feature bitsPeter Maydell
FEATURE_V8 implies both FEATURE_V7MP and FEATURE_ARM_DIV, so we don't need to set them explicitly in initfns which set the V8 feature bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-3-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: arm_any_initfn() should never set ARM_FEATURE_AARCH64Peter Maydell
The arm_any_initfn() is used only for the 32-bit linux-user "cpu any", so it only gets called in builds where TARGET_AARCH64 is not defined. Remove the unreachable line which sets ARM_FEATURE_AARCH64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-2-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: A64: Use PMULL feature bit for PMULLPeter Maydell
Now that we have a separate ARM_FEATURE_V8_PMULL bit, use it for the A64 PMULL, not the AES feature bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-09target-arm: add support for v8 VMULL.P64 instructionPeter Maydell
Add support for the VMULL.P64 polynomial 64x64 to 128 bit multiplication instruction in the A32/T32 instruction sets; this is part of the v8 Crypto Extensions. To do this we have to move the neon_pmull_64_{lo,hi} helpers from helper-a64.c into neon_helper.c so they can be used by the AArch32 translator. Inspired-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401386724-26529-4-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: Allow 3reg_wide undefreq to encode more bad size optionsPeter Maydell
The current undefreq field in the neon_3reg_wide handling allows us to encode "UNDEF if size != 0" and "UNDEF if size == 0". This is no longer sufficient with the advent of 64-bit polynomial VMULL, which means we want to UNDEF if size == 1. Change the undefreq encoding to use separate bits for all of "UNDEF if size == 0", "UNDEF if size == 1" and "UNDEF if size == 2". Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401386724-26529-3-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 22:08:39 +0000