aboutsummaryrefslogtreecommitdiff
path: root/target-arm/translate.c
AgeCommit message (Collapse)Author
2016-03-22target-arm: dfilter support for in_asmAlex Bennée
Each individual architecture needs to use the qemu_log_in_addr_range() feature for enabling in_asm output as it is part of the frontend. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-Id: <1458052224-9316-9-git-send-email-alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-16target-arm: Implement MRS (banked) and MSR (banked) instructionsPeter Maydell
Starting with the ARMv7 Virtualization Extensions, the A32 and T32 instruction sets provide instructions "MSR (banked)" and "MRS (banked)" which can be used to access registers for a mode other than the current one: * R<m>_<mode> * ELR_hyp * SPSR_<mode> Implement the missing instructions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1456762734-23939-1-git-send-email-peter.maydell@linaro.org
2016-03-04target-arm: Only trap SRS from S-EL1 if specified mode is MONRalf-Philipp Weinmann
Commit cbc0326b6fb9 caused SRS instructions executed from Secure EL1 to trap to EL3 even if the specified mode was not monitor mode. According to the ARMv8 Architecture reference manual [F6.1.203], ALL of the following conditions need to be met for SRS to trap to EL3: * It is executed at Secure PL1. * The specified mode is monitor mode. * EL3 is using AArch64. Correct the condition governing the trap to EL3 to check the specified mode. Signed-off-by: Ralf-Philipp Weinmann <ralf+devel@comsecuris.com> Message-id: 20160222224251.GA11654@beta.comsecuris.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [PMM: tweaked comment text to read 'specified mode'; edited commit message] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: implement BE32 mode in system emulationPaolo Bonzini
System emulation only has a little-endian target; BE32 mode is implemented by adjusting the low bits of the address for every byte and halfword load and store. 64-bit accesses flip the low and high words. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [PC changes: * rebased against master (Jan 2016) ] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: implement setendPaolo Bonzini
Since this is not a high-performance path, just use a helper to flip the E bit and force a lookup in the hash table since the flags have changed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: introduce tbflag for endiannessPeter Crosthwaite
Introduce a tbflags for endianness, set based upon the CPUs current endianness. This in turn propagates through to the disas endianness flag. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: introduce disas flag for endiannessPaolo Bonzini
Introduce a disas flag for setting the CPU data endianness. This allows control of the endianness from the CPU state rather than hard-coding it to TARGET_WORDS_BIGENDIAN. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [ PC changes: * Split off as new patch from original: "target-arm: introduce tbflag for CPSR.E" * Wrote commit message from scratch ] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: pass DisasContext to gen_aa32_ld*/st*Paolo Bonzini
We'll need the DisasContext in the next patch to retrieve the desired endianness, so pass it as a whole to gen_aa32_ld*/st*. Unfortunately we cannot let those functions call get_mem_index, because of user-mode load/store instructions. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [ PC changes: * Fix long lines ] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: implement SCTLR.B, drop bswap_codePaolo Bonzini
bswap_code is a CPU property of sorts ("is the iside endianness the opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the actual CPU state involved here which is SCTLR.B (set for BE32 binaries, clear for BE8). Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code. The next patches will make data fetches honor both SCTLR.B and CPSR.E appropriately. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [PC changes: * rebased on master (Jan 2016) * s/TARGET_USER_ONLY/CONFIG_USER_ONLY * Use bswap_code() for disas_set_info() instead of raw sctlr_b ] Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-01tcg: Add type for vCPU pointersLluís Vilanova
Adds the 'TCGv_env' type for pointers to 'CPUArchState' objects. The tracing infrastructure later needs to differentiate between regular pointers and pointers to vCPUs. Also changes all targets to use the new 'TCGv_env' type instead of the generic 'TCGv_ptr'. As of now, the change is merely cosmetic ('TCGv_env' translates into 'TCGv_ptr'), but that could change in the future to enforce the difference. Note that a 'TCGv_env' type (for 'CPUState') is not added, since all helpers currently receive the architecture-specific pointer ('CPUArchState'). Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Acked-by: Richard Henderson <rth@twiddle.net> Message-id: 145641859552.30295.7821536833590725201.stgit@localhost Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-02-26target-arm: Give CPSR setting on 32-bit exception return its own helperPeter Maydell
The rules for setting the CPSR on a 32-bit exception return are subtly different from those for setting the CPSR via an instruction like MSR or CPS. (In particular, in Hyp mode changing the mode bits is not valid via MSR or CPS.) Split the exception-return case into its own helper for setting CPSR, so we can eventually handle them differently in the helper function. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-2-git-send-email-peter.maydell@linaro.org
2016-02-18target-arm: UNDEF in the UNPREDICTABLE SRS-from-System casePeter Maydell
Make get_r13_banked() raise an exception at runtime for the corner case of SRS from System mode, so that we can UNDEF it; this brings us in to line with the ARM ARM's set of permitted CONSTRAINED UNPREDICTABLE choices. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-18target-arm: Clean up trap/undef handling of SRSPeter Maydell
The SRS instruction is: * UNDEFINED in Hyp mode * UNPREDICTABLE in User or System mode * UNPREDICTABLE if the specified mode isn't accessible * trapped to EL3 if EL3 is AArch64 and we are at Secure EL1 Clean up the code to handle all these cases cleanly, including picking UNDEF as our choice of UNPREDICTABLE behaviour rather blindly trusting the mode field passed in the instruction. As part of this, move the check for IS_USER into gen_srs() itself rather than having it done by the caller. The exception is that we don't UNDEF for calls from System mode, which need a runtime check. This will be dealt with in the following commits. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-11target-arm: Fix IL bit reported for Thumb VFP and Neon trapsPeter Maydell
All Thumb Neon and VFP instructions are 32 bits, so the IL bit in the syndrome register should be set. Pass false to the syn_* function's is_16bit argument rather than s->thumb so we report the correct IL bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454683067-16001-4-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Fix IL bit reported for Thumb coprocessor trapsPeter Maydell
All Thumb coprocessor instructions are 32 bits, so the IL bit in the syndrome register should be set. Pass false to the syn_* function's is_16bit argument rather than s->thumb so we report the correct IL bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454683067-16001-3-git-send-email-peter.maydell@linaro.org
2016-02-11target-arm: Add isread parameter to CPAccessFnsPeter Maydell
System registers might have access requirements which need to be described via a CPAccessFn and which differ for reads and writes. For this to be possible we need to pass the access function a parameter to tell it whether the access being checked is a read or a write. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1454506721-11843-6-git-send-email-peter.maydell@linaro.org
2016-02-09tcg: Change tcg_global_mem_new_* to take a TCGv_ptrRichard Henderson
Thus, use cpu_env as the parameter, not TCG_AREG0 directly. Update all uses in the translators. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-09tcg: Remove lingering references to gen_opc_bufRichard Henderson
Three in comments and one in code in the stub tcg_liveness_analysis. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-02-03log: do not unnecessarily include qom/cpu.hPaolo Bonzini
Split the bits that require it to exec/log.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1452174932-28657-8-git-send-email-den@openvz.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-01-18target-arm: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 1449505425-32022-3-git-send-email-peter.maydell@linaro.org
2015-12-17target-arm: Fix and improve AA32 singlestep translation completion codeSergey Fedorov
The AArch32 translation completion code for singlestep enabled/active case was a way more confusing and too repetitive then it needs to be. Probably that was the cause for a bug to be introduced into it at some point. The bug was that SWI/HVC/SMC exception would be generated in condition-failed instruction code path whereas it shouldn't. This patch rewrites the code in a way similar to the non-singlestep case. In the condition-passed/unconditional instruction code path we need to: - Write the condexec bits back to the CPU state - Advance the singlestep state machine and generate a corresponding exception in case of SWI/HVC/SMC - Write the PC back to the CPU state if it hasn't already been written and generate an appropriate singlestep exception otherwise In the condition-failed instruction code path we need to: - Set a TCG label to jump to it if the condition is failed - Write the condexec bits back to the CPU state - Write the PC back to the CPU state since it hasn't been written in this case - Generate an appropriate singlestep exception Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1448474560-22475-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-12-17target-arm: raise exception on misaligned LDREX operandsAndrew Baumann
Qemu does not generally perform alignment checks. However, the ARM ARM requires implementation of alignment exceptions for a number of cases including LDREX, and Windows-on-ARM relies on this. This change adds plumbing to enable alignment checks on loads using MO_ALIGN, a do_unaligned_access hook to raise the exception (data abort), and uses the new aligned loads in LDREX (for all but single-byte loads). Signed-off-by: Andrew Baumann <Andrew.Baumann@microsoft.com> Message-id: 1449167808-5656-1-git-send-email-Andrew.Baumann@microsoft.com [PMM: set WnR bits in syndrome and FSR as appropriate] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19target-arm: Update condexec before arch BP check in AA32 translationSergey Fedorov
Architectural breakpoint check could raise an exceptions, thus condexec bits should be updated before calling gen_helper_check_breakpoints(). Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1447767527-21268-3-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-19target-arm: Update condexec before CP access check in AA32 translationSergey Fedorov
Coprocessor access instructions are allowed inside IT block. gen_helper_access_check_cp_reg() can raise an exceptions thus condexec bits should be updated before. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1447767527-21268-2-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12target-arm: Update PC before calling gen_helper_check_breakpoints()Sergey Fedorov
PC should be updated in the CPU state before calling check_breakpoints() helper. Otherwise, the helper would not see the correct PC in the CPU state if it is not at the start of a TB. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1447176222-16401-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-10target-arm: Clean up DISAS_UPDATE usage in AArch32 translation codeSergey Fedorov
AArch32 translation code does not distinguish between DISAS_UPDATE and DISAS_JUMP. Thus, we cannot use any of them without first updating PC in CPU state. Furthermore, it is too complicated to update PC in CPU state before PC gets updated in disas context. So it is hardly possible to correctly end TB early if is is not likely to be executed before calling disas_*_insn(), e.g. just after calling breakpoint check helper. Modify DISAS_UPDATE and DISAS_JUMP usage in AArch32 translation and apply to them the same semantic as AArch64 translation does: - DISAS_UPDATE: update PC in CPU state when finishing translation - DISAS_JUMP: preserve current PC value in CPU state when finishing translation This patch fixes a bug in AArch32 breakpoint handling: when check_breakpoints helper does not generate an exception, ending the TB early with DISAS_UPDATE couldn't update PC in CPU state and execution hangs. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1447097859-586-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-03target-arm: Report S/NS status in the CPU debug logsPeter Maydell
If this CPU supports EL3, enhance the printing of the current CPU mode in debug logging to distinguish S from NS modes as appropriate. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 1445883178-576-3-git-send-email-peter.maydell@linaro.org
2015-10-28target-*: Advance pc after recognizing a breakpointRichard Henderson
Some targets already had this within their logic, but make sure it's present for all targets. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-27target-arm/translate.c: Handle non-executable page-straddling Thumb insnsPeter Maydell
When the memory we're trying to translate code from is not executable we have to turn this into a guest fault. In order to report the correct PC for this fault, and to make sure it is not reported until after any other possible faults for instructions earlier in execution, we must terminate TBs at the end of a page, in case the next instruction is in a non-executable page. This is simple for T16, A32 and A64 instructions, which are always aligned to their size. However T32 instructions may be 32-bits but only 16-aligned, so they can straddle a page boundary. Correct the condition that checks whether the next instruction will touch the following page, to ensure that if we're 2 bytes before the boundary and this insn is T32 then we end the TB. Reported-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16target-arm: Fix CPU breakpoint handlingSergey Fedorov
A QEMU breakpoint match is not definitely an architectural breakpoint match. If an exception is generated unconditionally during translation, it is hardly possible to ignore it in the debug exception handler. Generate a call to a helper to check CPU breakpoints and raise an exception only if any breakpoint matches architecturally. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-16target-arm: Break the TB after ISB to execute self-modified code correctlySergey Sorokin
If any store instruction writes the code inside the same TB after this store insn, the execution of the TB must be stopped to execute new code correctly. As described in ARMv8 manual D3.4.6 self-modifying code must do an IC invalidation to be valid, and an ISB after it. So it's enough to end the TB after ISB instruction on the code translation. Also this TB break is necessary to take any pending interrupts immediately after an ISB (as required by ARMv8 ARM D1.14.4). Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> [PMM: tweaked commit message and comments slightly] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-07tcg: Remove gen_intermediate_code_pcRichard Henderson
It is no longer used, so tidy up everything reached by it. This includes the gen_opc_* arrays, the search_pc parameter and the inline gen_intermediate_code_internal functions. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Pass data argument to restore_state_to_opcRichard Henderson
The gen_opc_* arrays are already redundant with the data stored in the insn_start arguments. Transition restore_state_to_opc to use data from the latter. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Add TCG_MAX_INSNSRichard Henderson
Adjust all translators to respect it. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-arm: Add condexec state to insn_startRichard Henderson
Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Introduce and use cpu_breakpoint_testRichard Henderson
Reduce the boilerplate required for each target. At the same time, move the test for breakpoint after calling tcg_gen_insn_start. Note that arm and aarch64 do not use cpu_breakpoint_test, but still move the inline test down after tcg_gen_insn_start. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Increment num_insns immediately after tcg_gen_insn_startRichard Henderson
This does tidy the icount test common to all targets. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07target-*: Unconditionally emit tcg_gen_insn_startRichard Henderson
While we're at it, emit the opcode adjacent to where we currently record data for search_pc. This puts gen_io_start et al on the "correct" side of the marker. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-10-07tcg: Rename debug_insn_start to insn_startRichard Henderson
With an eye toward making it mandatory. Reviewed-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-09-14target-arm: Handle always condition codes within arm_test_ccRichard Henderson
Handling this with TCG_COND_ALWAYS will allow these unlikely cases to be handled without special cases in the rest of the translator. The TCG optimizer ought to be able to reduce these ALWAYS conditions completely. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1441909103-24666-4-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14target-arm: Introduce DisasCompareRichard Henderson
Split arm_gen_test_cc into 3 functions, so that it can be reused for non-branch TCG comparisons. Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1441909103-24666-3-git-send-email-rth@twiddle.net Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-14target-arm: Share all common TCG temporariesRichard Henderson
This is a bug fix for aarch64. At present, we have branches using the 32-bit (translate.c) versions of cpu_[NZCV]F, but we set the flags using the 64-bit (translate-a64.c) versions of cpu_[NZCV]F. From the view of the TCG code generator, these are unrelated variables. The bug is hard to see because we currently only read these variables from branches, and upon reaching a branch TCG will first spill live variables and then reload the arguments of the branch. Since the 32-bit versions were never live until reaching the branch, we'd re-read the data that had just been spilled from the 64-bit versions. There is currently no such problem with the cpu_exclusive_* variables, but there's no point in tempting fate. Cc: qemu-stable@nongnu.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1441909103-24666-2-git-send-email-rth@twiddle.net Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-09-11maint: remove / fix many doubled wordsDaniel P. Berrange
Many source files have doubled words (eg "the the", "to to", and so on). Most of these can simply be removed, but a couple were actual mis-spellings (eg "to to" instead of "to do"). There was even one triple word score "to to to" :-) Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2015-09-08target-arm: Fix default_exception_el() function for the case when EL3 is not ↵Sergey Sorokin
supported If EL3 is not supported in current configuration, we should not try to get EL3 bitness. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-id: 1441208342-10601-2-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-08-24tcg: Remove tcg_gen_trunc_i64_i32Richard Henderson
Replacing it with tcg_gen_extrl_i64_i32. Signed-off-by: Richard Henderson <rth@twiddle.net>
2015-07-06target-arm: Implement YIELD insn to yield in ARM and Thumb translatorsPeter Maydell
Implement the YIELD instruction in the ARM and Thumb translators to actually yield control back to the top level loop rather than being a simple no-op. (We already do this for A64.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Message-id: 1435672316-3311-3-git-send-email-peter.maydell@linaro.org
2015-06-22disas: Remove uses of CPU envPeter Crosthwaite
disas does not need to access the CPU env for any reason. Change the APIs to accept CPU pointers instead. Small change pattern needs to be applied to all target translate.c. This brings us closer to making disas.o a common-obj and less architecture specific in general. Cc: Richard Henderson <rth@twiddle.net> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Cc: Michael Walle <michael@walle.cc> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Leon Alrae <leon.alrae@imgtec.com> Cc: Jia Liu <proljc@gmail.com> Cc: Alexander Graf <agraf@suse.de> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Max Filippov <jcmvbkbc@gmail.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Acked-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-06-15target-arm: Correct "preferred return address" for cpreg access exceptionsPeter Maydell
The architecture defines that when taking an exception trying to access a coprocessor register, the "preferred return address" for the exception is the address of the instruction that caused the exception. Correct an off-by-4 error which meant we were returning the address after the instruction for traps which happened because of a failure of a runtime access-check function on an AArch32 register. (Traps caused by translate-time checkable permissions failures had the correct address, as did traps on AArch64 registers.) This fixes https://bugs.launchpad.net/qemu/+bug/1463338 Reported-by: Robert Buhren <robert@robertbuhren.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1433861440-30133-1-git-send-email-peter.maydell@linaro.org
2015-06-15target-arm: Add the THUMB_DSP featureAurelio C. Remonda
Create an ARM_FEATURE_THUMB_DSP controlling the Thumb encodings of the 85 DSP instructions (these are all Thumb2). This is enabled for all non-M-profile CPUs with Thumb2 support, as the instructions are mandatory for R and A profiles. On M profile they are optional and not present in the Cortex-M3 (though they are in the M4). The effect of this commit is that we will now treat the DSP encodings as illegal instructions on M3, when previously we incorrectly implemented them. Signed-off-by: Aurelio C. Remonda <aurelioremonda@gmail.com> Message-id: 1434311355-26554-1-git-send-email-aurelioremonda@gmail.com [PMM: added clz/crc32/crc32c and default case to the early-decode switch; minor format/spacing fixups; reworded commit message a bit] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-29target-arm: Avoid buffer overrun on UNPREDICTABLE ldrd/strdPeter Maydell
A LDRD or STRD where rd is not an even number is UNPREDICTABLE. We were letting this fall through, which is OK unless rd is 15, in which case we would attempt to do a load_reg or store_reg to a nonexistent r16 for the second half of the double-word. Catch the odd-numbered-rd cases and UNDEF them instead. To do this we rearrange the structure of the code a little so we can put the UNDEF catches at the top before we've allocated TCG temporaries. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1431348973-21315-1-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-17 23:48:18 +0000