| Age | Commit message (Collapse) | Author |
|---|
|
The order of operands for the accumulate step in disas_simd_3same_int()
was reversed. This only affected the MLS instruction, since all the
other accumulating instructions in this category perform an addition
rather than a subtraction.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Tested-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add the saturating accumulate operations USQADD and SUQADD
to the A64 instruction set. This completes coverage of A64 Neon.
These operations (which are unsigned + signed -> signed and
signed + unsigned -> unsigned) don't exist in the A32/T32
instruction set, so require a complete new set of helper functions.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
This mostly re-uses the existing NEON helpers with an additional two for
the 64 bit case. I also took the opportunity to add TCG_CALL_NO_RWG
options to the helpers as they don't modify globals (saturation flags
are in the CPU Environment).
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
This adds support for [UF]RSQRTE instructions. It utilises the existing
NEON helpers with some changes. The changes include an explicit passing
of fpstatus (so the correct one is used between arm32 and aarch64),
denormilzation, more correct error handling and also proper scaling of
the fraction going into the estimate.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-25-git-send-email-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the FCVTXN operation, which does a narrowing fp precision
conversion using the "round to odd" (von Neumann) mode. This can
conveniently be implemented as "do operation using round to zero;
then set the LSB of the mantissa to 1 if the Inexact flag was set".
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-24-git-send-email-peter.maydell@linaro.org
|
|
This completes the set of integer narrowing saturating ops including:
SQXTN, SQXTN2
SQXTUN, SQXTUN2
UQXTN, UQXTN2
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-23-git-send-email-peter.maydell@linaro.org
|
|
Move the handle_2misc_narrow() function up the file so that it can
be called from disas_simd_scalar_two_reg_misc().
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-22-git-send-email-peter.maydell@linaro.org
|
|
Implement URECPE and FRECPE instructions in both scalar and vector forms.
The actual reciprocal estimate function is shared with the A32/T32 Neon
code. However in A64 we aren't using the Neon "standard FPSCR value"
so extra checks are necessary to handle non-squashed denormal inputs
which can never happen for A32/T32. Calling conventions for the helpers
are thus modified to pass the fpst directly; we mark the helpers as
TCG_CALL_NO_RWG since we're changing the declarations anyway.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-21-git-send-email-peter.maydell@linaro.org
|
|
Implement FCVTZS and FCVTZU in the shift-imm and scalar-shift-imm
categories; this completes the implementation of those two groups.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-19-git-send-email-peter.maydell@linaro.org
|
|
Implement the saturating left shift instructions SQSHL, SQSHLU
and UQSHL for the scalar-shift-imm and shift-imm categories.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-18-git-send-email-peter.maydell@linaro.org
|
|
Implement the FRINT* round-to-integral operations from
the 2-reg-misc category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-16-git-send-email-peter.maydell@linaro.org
|
|
Implement SRI (shift right and insert).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-15-git-send-email-peter.maydell@linaro.org
|
|
These are fairly simple exponent only estimation functions using helpers.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-14-git-send-email-peter.maydell@linaro.org
|
|
Add the remaining unsupported opcodes to the decode switches
for the shift-imm and scalar shift-imm categories so we can
see what is still to be implemented.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-13-git-send-email-peter.maydell@linaro.org
|
|
Implement FCVTL, the only instruction in the 2-reg-misc group
which widens from size to 2*size elements.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-12-git-send-email-peter.maydell@linaro.org
|
|
Implement FCVTN (narrowing fp-to-fp conversions) from the SIMD
2-reg-misc category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-11-git-send-email-peter.maydell@linaro.org
|
|
Implement the floating-point-to-integer conversion instructions
FCVT[NMAPZ][SU] in the 2-reg-misc and scalar-2-reg-misc
categories.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-10-git-send-email-peter.maydell@linaro.org
|
|
Implement the SHLL and SHLL2 instructions from the 2-reg-misc
category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-9-git-send-email-peter.maydell@linaro.org
|
|
Implement the SADDLP, UADDLP, SADALP and UADALP instructions
in the SIMD 2-reg misc category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-8-git-send-email-peter.maydell@linaro.org
|
|
This implements the remaining [US][Q][R]SHR[U][N][2] opcodes, which are
saturating and narrowing shift right operations. These are used in
things like libav. Note signed shifts can have an "unsigned" saturating
narrow operation which will floor negative values.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1394822294-14837-7-git-send-email-peter.maydell@linaro.org
[PMM: Added the scalar encodings, style tweaks]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the CLS, CLZ operations in the 2-reg-misc category.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-6-git-send-email-peter.maydell@linaro.org
|
|
Implement FSQRT in the two-reg-misc category.
GCC uses this instruction form.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-5-git-send-email-peter.maydell@linaro.org
|
|
This adds the remaining [US]CVTF operations to the SIMD
shift-immediate, scalar-shift-immediate, two-reg-misc and
scalar-two-reg-misc groups of opcodes.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1394822294-14837-4-git-send-email-peter.maydell@linaro.org
[PMM: added scalar 2-misc and scalar-shift-imm encodings]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
rn == 31 always means SP (not XZR) whether an add_sub_ext
instruction is setting the flags or not; only rd has behaviour
dependent on whether we are setting flags.
Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-3-git-send-email-peter.maydell@linaro.org
|
|
Implement the PMULL instruction; this is the last unimplemented insn
in the three-reg-diff group.
Note that PMULL with size 3 is considered part of the AES part
of the crypto extensions (see the ID_AA64ISAR0_EL1 register definition
in the v8 ARM ARM), so it isn't necessary to burn an extra feature
bit on it, even though we're using more feature bits than a single
"crypto extension present/not present" toggle.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394822294-14837-2-git-send-email-peter.maydell@linaro.org
|
|
Most targets were using offsetof(CPUFooState, breakpoints) to determine
how much of CPUFooState to clear on reset. Use the next field after
CPU_COMMON instead, if any, or sizeof(CPUFooState) otherwise.
Signed-off-by: Andreas Färber <afaerber@suse.de>
|
|
Fixes a build error when these are different, e.g. x32.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1394043257-4800-1-git-send-email-rth@twiddle.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Implement the MSR (immediate) instructions, which can update the
PSTATE SP and DAIF fields.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Implement the WFI instruction for A64; this just involves wiring
up the instruction, and adding a gen_a64_set_pc_im() which was
accidentally omitted from the A64 decoder top loop.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Emit the correct MMU index information for loads and stores from
A64 code, rather than hardwiring it to "always kernel mode",
by storing the exception level in the TB flags, and make
cpu_mmu_index() return the right answer when the CPU is in
AArch64 mode.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Implement the CurrentEL sysreg.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Implement the unprivileged load and store instructions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the narrowing three-reg-diff operations: ADDHN,
RADDHN, SUBHN and RSUBHN.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the wide three-reg-different operations:
SADDW, UADDW, SSUBW and USUBW.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add the remainder of the 64x64->128 operations in the three-reg-diff
category except for PMULL, PMULL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
The opcode switch in disas_simd_three_reg_diff() is missing the
customary comments indicating which cases correspond to which
instructions. Add them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
System mode store-exclusive use a different code path to usermode ones;
implement this missing code, in a similar way to the 32 bit version.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Now that cpreg read and write functions can't fail and throw an
exception, we can remove the code from the translator that synchronises
the guest PC in case an exception is thrown.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Several of the system registers handled via the ARMCPRegInfo
mechanism have access trap control bits controlling whether the
registers are accessible to lower privilege levels. Replace
the existing mechanism (allowing the read and write functions
to return EXCP_UDEF if access is denied) with a dedicated
"check access rights" function pointer in the ARMCPRegInfo.
This will allow us to simplify some of the register definitions,
which no longer need read/write functions purely to handle
the access checks.
We take the opportunity to define the return value from the
access checking function in a way that allows us to set the
correct exception syndrome information for exceptions taken
to AArch64 (which may need to distinguish access failures due
to a configurable trap or enable from other kinds of access
failure).
This commit defines the new mechanism but does not move any
of the registers across to use it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Log guest attempts to access unimplemented system registers via
the LOG_UNIMP reporting mechanism (for both the 32 bit and 64 bit
instruction sets). This is particularly useful for debugging
problems where the guest is trying to use a system register that
QEMU doesn't implement.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
|
|
Implement the remaining instructions in the SIMD 3-reg-same
and scalar-3-reg-same groups: FMULX, FRECPS, FRSQRTS, FACGE,
FACGT, FMLA and FMLS.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add support for the floating-point pairwise operations
FADDP, FMAXP, FMAXNMP, FMINP and FMINNMP. To do this we use the
code which was previously handling only integer pairwise operations,
and push the integer-specific decode and handling of unallocated
cases up one level in the call tree, so we can also call it from
the floating-point section of the decoder.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
This adds all forms of the SIMD floating point and set instructions:
FCM(GT|GE|EQ|LE|LT)
Most of the heavy lifting is done by either the existing neon helpers or
some new helpers for the 64bit double cases. Most of the code paths are
common although the 2misc versions are a little special as they compare
against zero.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
[PMM: fixed some minor bugs, added the 2-misc-scalar encoding]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the scalar three different instruction group:
it only has three instructions in it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the SIMD scalar indexed instructions. The encoding
here is nearly identical to the vector indexed grouping, so
we combine the two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement the 'long' operations in the vector x indexed
element category.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Implement all the SIMD vector x indexed element instructions
in the subcategory which are not 'long' ops.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Use libvixl to implement disassembly output in debug
logs for A64, for use with both AArch64 hosts and targets.
Signed-off-by: Claudio Fontana <claudio.fontana@linaro.org>
[PMM:
* added support for target disassembly
* switched to custom QEMUDisassembler so the output format
matches what QEMU expects
* make sure we correctly fall back to "just print hex"
if we didn't build the AArch64 disassembler because of
lack of a C++ compiler
* rename from 'aarch64' to 'arm-a64' because this is a
disassembler for the A64 instruction set
* merge aarch64.c and aarch64-cxx.cc into one C++ file
* simplify the aarch64.c<->aarch64-cxx.cc interface]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add the SIMD FNEG and FABS instructions in the SIMD 2-reg-misc group.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
|
Add the byte-reverse operations REV64, REV32 and REV16 from the
two-reg-misc group.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <rth@twiddle.net>
|
