aboutsummaryrefslogtreecommitdiff
path: root/target-arm/helper.c
AgeCommit message (Collapse)Author
2016-12-20Move target-* CPU file into a target/ folderThomas Huth
We've currently got 18 architectures in QEMU, and thus 18 target-xxx folders in the root folder of the QEMU source tree. More architectures (e.g. RISC-V, AVR) are likely to be included soon, too, so the main folder of the QEMU sources slowly gets quite overcrowded with the target-xxx folders. To disburden the main folder a little bit, let's move the target-xxx folders into a dedicated target/ folder, so that target-xxx/ simply becomes target/xxx/ instead. Acked-by: Laurent Vivier <laurent@vivier.eu> [m68k part] Acked-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> [tricore part] Acked-by: Michael Walle <michael@walle.cc> [lm32 part] Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x part] Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [s390x part] Acked-by: Eduardo Habkost <ehabkost@redhat.com> [i386 part] Acked-by: Artyom Tarasenko <atar4qemu@gmail.com> [sparc part] Acked-by: Richard Henderson <rth@twiddle.net> [alpha part] Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa part] Reviewed-by: David Gibson <david@gibson.dropbear.id.au> [ppc part] Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> [cris&microblaze part] Acked-by: Guan Xuetao <gxt@mprc.pku.edu.cn> [unicore32 part] Signed-off-by: Thomas Huth <thuth@redhat.com>
2016-11-07Fix corruption of CPSR when SCTLR.EE is setJulian Brown
Fix a typo in arm_cpu_do_interrupt_aarch32 (OR'ing with ~CPSR_E instead of CPSR_E) which meant that when we took an interrupt with SCTLR.EE set we would corrupt the CPSR. Signed-off-by: Julian Brown <julian@codesourcery.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-24target-arm: Implement new HLT trap for semihostingPeter Maydell
Version 2.0 of the semihosting specification introduces new trap instructions for AArch32: HLT 0xF000 for A32 and HLT 0x3C for T32. Implement these (in the same way we implement the existing HLT semihosting trap for A64). The old traps via SVC and BKPT are unaffected. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1476792973-18508-1-git-send-email-peter.maydell@linaro.org
2016-10-17target-arm: Add trace events for the generic timersPeter Maydell
Add some useful trace events for the ARM generic timers (notably the various register writes and the resulting IRQ line state). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1476294876-12340-3-git-send-email-peter.maydell@linaro.org
2016-10-17target-arm: Implement dummy MDCCINT_EL1Peter Maydell
MDCCINT_EL1 is part of the DCC debugger communication channel between the CPU and an attached external debugger. QEMU doesn't implement this, but since Linux may try to access this register we need to provide at least a dummy implementation. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1476294876-12340-2-git-send-email-peter.maydell@linaro.org
2016-10-17target-arm: Infrastucture changes to enable handling of tagged address ↵Thomas Hanson
loading into PC When capturing the current CPU state for the TB, extract the TBI0 and TBI1 values from the correct TCR for the current EL and then add them to the TB flags field. Then, at the start of code generation for the block, copy the TBI fields into the DisasContext structure. Signed-off-by: Thomas Hanson <thomas.hanson@linaro.org> Message-id: 1476301853-15774-2-git-send-email-thomas.hanson@linaro.org [PMM: drop useless 'extern' keyword on function prototypes; provide CONFIG_USER_ONLY trivial versions of arm_regime_tbi[01]()] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-16tcg: Merge GETPC and GETRARichard Henderson
The return address argument to the softmmu template helpers was confused. In the legacy case, we wanted to indicate that there is no return address, and so passed in NULL. However, we then immediately subtracted GETPC_ADJ from NULL, resulting in a non-zero value, indicating the presence of an (invalid) return address. Push the GETPC_ADJ subtraction down to the only point it's required: immediately before use within cpu_restore_state_from_tb, after all NULL pointer checks have been completed. This makes GETPC and GETRA identical. Remove GETRA as the lesser used macro, replacing all uses with GETPC. Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-09-13arm: spelling fix: mismatchMichael Tokarev
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2016-07-14target-arm: Add missed AArch32 TLBI sytem registersSergey Sorokin
Some PL2 related TLBI system registers are missed in AArch32 implementation. The patch fixes it. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-id: 1468328885-3217862-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-24softfloat: Implement run-time-configurable meaning of signaling NaN bitAleksandar Markovic
This patch modifies SoftFloat library so that it can be configured in run-time in relation to the meaning of signaling NaN bit, while, at the same time, strictly preserving its behavior on all existing platforms. Background: In floating-point calculations, there is a need for denoting undefined or unrepresentable values. This is achieved by defining certain floating-point numerical values to be NaNs (which stands for "not a number"). For additional reasons, virtually all modern floating-point unit implementations use two kinds of NaNs: quiet and signaling. The binary representations of these two kinds of NaNs, as a rule, differ only in one bit (that bit is, traditionally, the first bit of mantissa). Up to 2008, standards for floating-point did not specify all details about binary representation of NaNs. More specifically, the meaning of the bit that is used for distinguishing between signaling and quiet NaNs was not strictly prescribed. (IEEE 754-2008 was the first floating-point standard that defined that meaning clearly, see [1], p. 35) As a result, different platforms took different approaches, and that presented considerable challenge for multi-platform emulators like QEMU. Mips platform represents the most complex case among QEMU-supported platforms regarding signaling NaN bit. Up to the Release 6 of Mips architecture, "1" in signaling NaN bit denoted signaling NaN, which is opposite to IEEE 754-2008 standard. From Release 6 on, Mips architecture adopted IEEE standard prescription, and "0" denotes signaling NaN. On top of that, Mips architecture for SIMD (also known as MSA, or vector instructions) also specifies signaling bit in accordance to IEEE standard. MSA unit can be implemented with both pre-Release 6 and Release 6 main processor units. QEMU uses SoftFloat library to implement various floating-point-related instructions on all platforms. The current QEMU implementation allows for defining meaning of signaling NaN bit during build time, and is implemented via preprocessor macro called SNAN_BIT_IS_ONE. On the other hand, the change in this patch enables SoftFloat library to be configured in run-time. This configuration is meant to occur during CPU initialization, at the moment when it is definitely known what desired behavior for particular CPU (or any additional FPUs) is. The change is implemented so that it is consistent with existing implementation of similar cases. This means that structure float_status is used for passing the information about desired signaling NaN bit on each invocation of SoftFloat functions. The additional field in float_status is called snan_bit_is_one, which supersedes macro SNAN_BIT_IS_ONE. IMPORTANT: This change is not meant to create any change in emulator behavior or functionality on any platform. It just provides the means for SoftFloat library to be used in a more flexible way - in other words, it will just prepare SoftFloat library for usage related to Mips platform and its specifics regarding signaling bit meaning, which is done in some of subsequent patches from this series. Further break down of changes: 1) Added field snan_bit_is_one to the structure float_status, and correspondent setter function set_snan_bit_is_one(). 2) Constants <float16|float32|float64|floatx80|float128>_default_nan (used both internally and externally) converted to functions <float16|float32|float64|floatx80|float128>_default_nan(float_status*). This is necessary since they are dependent on signaling bit meaning. At the same time, for the sake of code cleanup and simplicity, constants <floatx80|float128>_default_nan_<low|high> (used only internally within SoftFloat library) are removed, as not needed. 3) Added a float_status* argument to SoftFloat library functions XXX_is_quiet_nan(XXX a_), XXX_is_signaling_nan(XXX a_), XXX_maybe_silence_nan(XXX a_). This argument must be present in order to enable correct invocation of new version of functions XXX_default_nan(). (XXX is <float16|float32|float64|floatx80|float128> here) 4) Updated code for all platforms to reflect changes in SoftFloat library. This change is twofolds: it includes modifications of SoftFloat library functions invocations, and an addition of invocation of function set_snan_bit_is_one() during CPU initialization, with arguments that are appropriate for each particular platform. It was established that all platforms zero their main CPU data structures, so snan_bit_is_one(0) in appropriate places is not added, as it is not needed. [1] "IEEE Standard for Floating-Point Arithmetic", IEEE Computer Society, August 29, 2008. Signed-off-by: Thomas Schwinge <thomas@codesourcery.com> Signed-off-by: Maciej W. Rozycki <macro@codesourcery.com> Signed-off-by: Aleksandar Markovic <aleksandar.markovic@imgtec.com> Tested-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Leon Alrae <leon.alrae@imgtec.com> Tested-by: Leon Alrae <leon.alrae@imgtec.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> [leon.alrae@imgtec.com: * cherry-picked 2 chunks from patch #2 to fix compilation warnings] Signed-off-by: Leon Alrae <leon.alrae@imgtec.com>
2016-06-17target-arm: Provide hook to tell GICv3 about changes of security statePeter Maydell
The GICv3 CPU interface needs to know when the CPU it is attached to makes an exception level or mode transition that changes the security state, because whether it is asserting IRQ or FIQ can change depending on these things. Provide a mechanism for letting the GICv3 device register a hook to be called on such changes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org> Tested-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1465915112-29272-5-git-send-email-peter.maydell@linaro.org
2016-06-14target-arm: Fix reset and migration of TTBCR(S)Peter Maydell
Commit 6459b94c26dd666badb3 broke reset and migration of the AArch32 TTBCR(S) register if the guest used non-LPAE page tables. This is because the AArch32 TTBCR register definition is marked as ARM_CP_ALIAS, meaning that the AArch64 variant has to handle migration and reset. Although AArch64 TCR_EL3 doesn't need to care about the mask and base_mask fields, AArch32 may do so, and so we must use the special TTBCR reset and raw write functions to ensure they are set correctly. This doesn't affect TCR_EL2, because the AArch32 equivalent of that is HTCR, which never uses the non-LPAE page table variant. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Pranith Kumar <bobby.prani+qemu@gmail.com> Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-id: 1465488181-31977-1-git-send-email-peter.maydell@linaro.org
2016-06-06target-arm: Fix TTBR selecting logic on AArch32 Stage 2 translationSergey Sorokin
Address size is 40-bit for the AArch32 stage 2 translation, and t0sz can be negative (from -8 to 7), so we need to adjust it to use the existing TTBR selecting logic. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-id: 1464974151-1231644-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-06target-arm: Don't try to set ESR IL bit in arm_cpu_do_interrupt_aarch64()Peter Maydell
Remove some incorrect code from arm_cpu_do_interrupt_aarch64() which attempts to set the IL bit in the syndrome register based on the value of env->thumb. This is wrong in several ways: * IL doesn't indicate Thumb-vs-ARM, it indicates instruction length (which may be 16 or 32 for Thumb and is always 32 for ARM) * not every syndrome format uses IL like this -- for some IL is always set, and for some it is always clear * the code is changing esr_el[new_el] even for interrupt entry, which is not supposed to modify ESR_ELx at all Delete the code, and instead rely on the syndrome value in env->exception.syndrome having already been set up with the correct value of IL. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1463487258-27468-3-git-send-email-peter.maydell@linaro.org
2016-06-06target-arm: Add the HSTR_EL2 registerAlistair Francis
Add the Hypervisor System Trap Register for EL2. This register is used early in the Linux boot and without it the kernel aborts with a "Synchronous Abort" error. Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: ea5aae4b10283de4705b864fe9d4bd2eaddaacae.1463174342.git.alistair.francis@xilinx.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-19cpu: move exec-all.h inclusion out of cpu.hPaolo Bonzini
exec-all.h contains TCG-specific definitions. It is not needed outside TCG-specific files such as translate.c, exec.c or *helper.c. One generic function had snuck into include/exec/exec-all.h; move it to include/qom/cpu.h. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-19arm: move arm_log_exception into .c filePaolo Bonzini
Avoid need for qemu/log.h inclusion, and make the function static too. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-12target-arm: Avoid unnecessary TLB flush on TCR_EL2, TCR_EL3 writesPeter Maydell
The TCR_EL2 and TCR_EL3 regdefs were incorrectly using the vmsa_tcr_el1_write function for writes. Since these registers don't have the A1 bit that TCR_EL1 does, we don't need to do a tlb_flush() when they are written. Remove the unnecessary .writefn and also the harmless but unneeded .raw_writefn and .resetfn definitions. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org>
2016-05-12target-arm: Fix descriptor address masking in ARM address translationSergey Sorokin
There is a bug in ARM address translation regime with a long-descriptor format. On the descriptor reading its address is formed from an index which is a part of the input address. And on the first iteration this index is incorrectly masked with 'grainsize' mask. But it can be wider according to pseudo-code. On the other hand on the iterations other than first the descriptor address is formed from the previous level descriptor by masking with 'descaddrmask' value. It always clears just 12 lower bits, but it must clear 'grainsize' lower bits instead according to pseudo-code. The patch fixes both cases. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-id: 1460996853-22117-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-05-12target-arm: Stage 2 permission fault was fixed in AArch32 stateSergey Sorokin
As described in AArch32.CheckS2Permission an instruction fetch fails if XN bit is set or there is no read permission for the address. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-id: 1461002400-3187-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-04-04target-arm: Make the 64-bit version of VTCR do the migrationPeter Maydell
Move the ALIAS tag from VTCR_EL2 to VTCR so that we migrate the 64-bit version, as is usual. (This has no particular effect now unless the guest wrote to the high RES0 bits of VTCR_EL2.) Add a comment about why it's OK that we don't have the various accessor functions that the EL1 TCR regdefs do. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-id: 1459435778-5526-4-git-send-email-peter.maydell@linaro.org
2016-04-04target-arm: Remove incorrect ALIAS tags from ESR_EL2 and ESR_EL3Peter Maydell
The regdefs for the ESR_EL2 and ESR_EL3 system registers should not be marked as ARM_CP_ALIAS, because these are the master copies; the DFSR regdef in vmsa_pmsa_cp_reginfo[] is marked as an alias. Remove the ALIAS tags so that these registers are correctly migrated. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.rog> Message-id: 1459435778-5526-3-git-send-email-peter.maydell@linaro.org
2016-04-04target-arm: Correctly reset SCTLR_EL3 for 64-bit CPUsPeter Maydell
The regdef for SCTRL_EL3 was incorrectly marked as being an ARM_CP_ALIAS, with the remark that this was because the 32-bit definition would take care of reset and migration. However the intention for banked registers as documented in the comment in add_cpreg_to_hashtable() is: * 2) If ARMv8 is enabled then we can count on a 64-bit version * taking care of the secure bank. This requires that separate * 32 and 64-bit definitions are provided. and so it marks the 32-bit secure banked version as an alias. This results in the sctlr_s/sctlr_el[3] field never being reset or migrated for a 64-bit CPU with EL3 enabled. Fix this by removing the ARM_CP_ALIAS annotation from SCTLR_EL3. Since this means it now needs a real reset value, move the regdef into the same place that we define the 32-bit SCTLR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Laurent Desnogues <laurent.desnogues@gmail.com> Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-id: 1459435778-5526-2-git-send-email-peter.maydell@linaro.org
2016-03-16target-arm: Fix translation level on early translation faultsSergey Sorokin
Qemu reports translation fault on 1st level instead of 0th level in case of AArch64 address translation if the translation table walk is disabled or the address is in the gap between the two regions. Signed-off-by: Sergey Sorokin <afarallax@yandex.ru> Message-id: 1457527503-25958-1-git-send-email-afarallax@yandex.ru Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: implement SCTLR.EEPeter Crosthwaite
Implement SCTLR.EE bit which controls data endianess for exceptions and page table translations. SCTLR.EE is mirrored to the CPSR.E bit on exception entry. Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: implement SCTLR.B, drop bswap_codePaolo Bonzini
bswap_code is a CPU property of sorts ("is the iside endianness the opposite way round to TARGET_WORDS_BIGENDIAN?") but it is not the actual CPU state involved here which is SCTLR.B (set for BE32 binaries, clear for BE8). Replace bswap_code with SCTLR.B, and pass that to arm_ld*_code. The next patches will make data fetches honor both SCTLR.B and CPSR.E appropriately. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [PC changes: * rebased on master (Jan 2016) * s/TARGET_USER_ONLY/CONFIG_USER_ONLY * Use bswap_code() for disas_set_info() instead of raw sctlr_b ] Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-04target-arm: Correct handling of writes to CPSR mode bits from gdb in usermodePeter Maydell
In helper.c the expression (env->uncached_cpsr & CPSR_M) != CPSR_USER is always true; the right hand side was supposed to be ARM_CPU_MODE_USR (an error in commit cb01d391). Since the incorrect expression was always true, this just meant that commit cb01d391 had no effect. However simply changing the RHS here would reveal a logic error: if the mode is USR we wish to completely ignore the attempt to set the mode bits, which means that we must clear the CPSR_M bits from mask to avoid the uncached_cpsr bits being updated at the end of the function. Move the condition into the correct place in the code, fix its RHS constant, and add a comment about the fact that we must be doing a gdbstub write if we're in user mode. Fixes: https://bugs.launchpad.net/qemu/+bug/1550503 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1456764438-30015-1-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Make reserved ranges in ID_AA64* spaces RAZ, not UNDEFPeter Maydell
The v8 ARM ARM defines that unused spaces in the ID_AA64* system register ranges are Reserved and must RAZ, rather than being UNDEF. Implement this. In particular, ARM v8.2 adds a new feature register ID_AA64MMFR2, and newer versions of the Linux kernel will attempt to read this, which causes them not to boot up on versions of QEMU missing this fix. Since the encoding .opc0 = 3, .opc1 = 0, .crn = 0, .crm = 2, .opc2 = 6 is actually defined in ARMv8 (as ID_MMFR4), we give it an entry in the ARMCPU struct so CPUs can override it, though since none do this too will just RAZ. Cc: qemu-stable@nongnu.org Reported-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455890863-11203-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Alex Bennée <alex.bennee@linaro.org>
2016-02-26target-arm: Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAWEdgar E. Iglesias
Mark CNTHP_TVAL_EL2 as ARM_CP_NO_RAW due to the register not having any underlying state. This fixes an issue with booting KVM enabled kernels when EL2 is on. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1456490739-19343-1-git-send-email-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-26target-arm: Implement MDCR_EL3.TPM and MDCR_EL2.TPM trapsPeter Maydell
Implement the performance monitor register traps controlled by MDCR_EL3.TPM and MDCR_EL2.TPM. Most of the performance registers already have an access function to deal with the user-enable bit, and the TPM checks can be added there. We also need a new access function which only implements the TPM checks for use by the few not-EL0-accessible registers and by PMUSERENR_EL0 (which is always EL0-readable). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455892784-11328-3-git-send-email-peter.maydell@linaro.org Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com>
2016-02-26target-arm: Fix handling of SDCR for 32-bit codePeter Maydell
Fix two issues with our implementation of the SDCR: * it is only present from ARMv8 onwards * it does not contain several of the trap bits present in its 64-bit counterpart the MDCR_EL3 Put the register description in the right place so that it does not get enabled for ARMv7 and earlier, and give it a write function so that we can mask out the bits which should not be allowed to have an effect if EL3 is 32-bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1455892784-11328-2-git-send-email-peter.maydell@linaro.org Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Acked-by: Alistair Francis <alistair.francis@xilinx.com>
2016-02-26target-arm: Make Monitor->NS PL1 mode changes illegal if HCR.TGE is 1Peter Maydell
If HCR.TGE is 1 then mode changes via CPS and MSR from Monitor to NonSecure PL1 modes are illegal mode changes. Implement this check in bad_mode_switch(). (We don't currently implement HCR.TGE, but this is the only missing check from the v8 ARM ARM G1.9.3 and so it's worth adding now; the rest of the HCR.TGE checks can be added later as necessary.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-12-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Make mode switches from Hyp via CPS and MRS illegalPeter Maydell
Mode switches from Hyp to any other mode via the CPS and MRS instructions are illegal mode switches (though obviously switching via exception return is valid). Add this check to bad_mode_switch(). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-11-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: In v8, make illegal AArch32 mode changes set PSTATE.ILPeter Maydell
In v8, the illegal mode changes which are UNPREDICTABLE in v7 are given architected behaviour: * the mode field is unchanged * PSTATE.IL is set (so any subsequent instructions will UNDEF) * any other CPSR fields are written to as normal This is pretty much the same behaviour we picked for our UNPREDICTABLE handling, with the exception that for v8 we need to set the IL bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-10-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Forbid mode switch to Mon from Secure EL1Peter Maydell
In v8 trying to switch mode to Mon from Secure EL1 is an illegal mode switch. (In v7 this is impossible as all secure modes except User are at EL3.) We can handle this case by making a switch to Mon valid only if the current EL is 3, which then gives the correct answer whether EL3 is AArch32 or AArch64. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-9-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Add Hyp mode checks to bad_mode_switch()Peter Maydell
We don't actually support Hyp mode yet, but add the correct checks for it to the bad_mode_switch() function for completeness. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-8-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Add comment about not implementing NSACR.RFRPeter Maydell
QEMU doesn't implement the NSACR.RFR bit, which is a permitted IMPDEF in choice in ARMv7 and the only permitted choice in ARMv8. Add a comment to bad_mode_switch() to note that this is why FIQ is always a valid mode regardless of the CPU's Secure state. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-7-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: In cpsr_write() ignore mode switches from User modePeter Maydell
The only case where we can attempt a cpsr_write() mode switch from User is from the gdbstub; all other cases are handled in the calling code (notably translate.c). Architecturally attempts to alter the mode bits from user mode are simply ignored (and not treated as a bad mode switch, which in v8 sets CPSR.IL). Make mode switches from User ignored in cpsr_write() as well, for consistency. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-6-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Raw CPSR writes should skip checks and bank switchingPeter Maydell
Raw CPSR writes should skip the architectural checks for whether we're allowed to set the A or F bits and should also not do the switching of register banks if the mode changes. Handle this inside cpsr_write(), which allows us to drop the "manually set the mode bits to avoid the bank switch" code from all the callsites which are using CPSRWriteRaw. This fixes a bug in 32-bit KVM handling where we had forgotten the "manually set the mode bits" part and could thus potentially trash the register state if the mode from the last exit to userspace differed from the mode on this exit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-4-git-send-email-peter.maydell@linaro.org
2016-02-26target-arm: Add write_type argument to cpsr_write()Peter Maydell
Add an argument to cpsr_write() to indicate what kind of CPSR write is being requested, since the exact behaviour should differ for the different cases. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1455556977-3644-3-git-send-email-peter.maydell@linaro.org
2016-02-18target-arm: Add PMUSERENR_EL0 registerAlistair Francis
The Linux kernel accesses this register early in its setup. Signed-off-by: Christopher Covington <christopher.covington@linaro.org> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: b30d536cb16ec57b4412172bb6dbc3f00d293e7d.1455060548.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18target-arm: Add the pmovsclr_el0 and pmintenclr_el1 registersAlistair Francis
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Nathan Rossi <nathan@nathanrossi.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 50deeafb24958a5b6d7f594b5dda399a022c0e5b.1455060548.git.alistair.francis@xilinx.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18target-arm: Add the pmceid0 and pmceid1 registersAlistair Francis
Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Nathan Rossi <nathan@nathanrossi.com> Message-id: da0563119a9f56fd5fbdc26e7ed19a8a8457c5b9.1455060548.git.alistair.francis@xilinx.com [PMM: Use 0 for PMCEID0 values for A15 and A57 since our PMU does not currently implement any events.] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-02-18target-arm: Move bank_number() into internals.hPeter Maydell
Move bank_number()'s implementation into internals.h, so it's available in the user-mode-only compile as well. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Move get/set_r13_banked() to op_helper.cPeter Maydell
Move get/set_r13_banked() from helper.c to op_helper.c. This will let us add exception-raising code to them, and also puts them in the same file as get/set_user_reg(), which makes some conceptual sense. (The original reason for the helper.c/op_helper.c split was that only op_helper.c had access to the CPU env pointer; this distinction has not been true for a long time, though, and so the split is now rather arbitrary.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2016-02-18target-arm: Report correct syndrome for FPEXC32_EL2 trapsPeter Maydell
If access to FPEXC32_EL2 is trapped by CPTR_EL2.TFP or CPTR_EL3.TFP, this should be reported with a syndrome register indicating an FP access trap, not one indicating a system register access trap. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Implement MDCR_EL3.TDA and MDCR_EL2.TDA trapsPeter Maydell
Implement the debug register traps controlled by MDCR_EL2.TDA and MDCR_EL3.TDA. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Implement MDCR_EL2.TDRA trapsPeter Maydell
Implement trapping of the "debug ROM" registers, which are controlled by MDCR_EL2.TDRA for EL2 but by the more general MDCR_EL3.TDA for EL3. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: Implement MDCR_EL3.TDOSA and MDCR_EL2.TDOSA trapsPeter Maydell
Implement the traps to EL2 and EL3 controlled by the bits MDCR_EL2.TDOSA MDCR_EL3.TDOSA. These can configurably trap accesses to the "powerdown debug" registers. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com>
2016-02-18target-arm: correct CNTFRQ access rightsPeter Maydell
Correct some corner cases we were getting wrong for CNTFRQ access rights: * should UNDEF from 32-bit Secure EL1 * only writable from the highest implemented exception level, which might not be EL1 now To clarify the code, provide a new utility function arm_highest_el() which returns the highest implemented exception level. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Sergey Fedorov <serge.fdrv@gmail.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-06 07:36:07 +0000