aboutsummaryrefslogtreecommitdiff
path: root/target-arm/cpu64.c
AgeCommit message (Collapse)Author
2014-06-09target-arm: VFPv4 implies half-precision extensionPeter Maydell
VFPv4 implies the presence of the half-precision floating point extension (which is optional in VFPv3). Add this implied rule to arm_cpu_realizefn() and remove some no-longer-needed explicit setting of the bit in initfns. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-5-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: Clean up handling of ARMv8 optional feature bitsPeter Maydell
CRC and crypto are both optional v8 extensions, so FEATURE_V8 should not imply them. Instead we should set these bits in the initfns for the 32-bit and 64-bit "cpu any" and for the Cortex-A57. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-4-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm: Remove unnecessary setting of feature bitsPeter Maydell
FEATURE_V8 implies both FEATURE_V7MP and FEATURE_ARM_DIV, so we don't need to set them explicitly in initfns which set the V8 feature bit. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1401458125-27977-3-git-send-email-peter.maydell@linaro.org
2014-06-09target-arm/cpu64.c: Actually register Cortex-A57 impdef registersPeter Maydell
cpu64.c contains a reginfo list for the impdef registers on the Cortex-A57; however we forgot to actually call define_arm_cp_regs(), so it was sitting there doing nothing. Remedy this omission. Message-id: 1401226259-23121-1-git-send-email-peter.maydell@linaro.org Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Tested-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-17target-arm: Dump 32-bit CPU state if 64 bit CPU is in AArch32Peter Maydell
For system mode, we may have a 64 bit CPU which is currently executing in AArch32 state; if we're dumping CPU state to the logs we should therefore show the correct state for the current execution state, rather than hardwiring it based on the type of the CPU. For consistency with how we handle translation, we leave the 32 bit dump function as the default, and have it hand off control to the 64 bit dump code if we're in AArch64 mode. Reported-by: Rob Herring <rob.herring@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-04-17target-arm: Handle the CPU being in AArch32 mode in the AArch64 set_pcPeter Maydell
The AArch64 implementation of the set_pc method needs to be updated to handle the possibility that the CPU is in AArch32 mode; otherwise there are weird crashes when doing interprocessing in system emulation mode when an interrupt occurs and we fail to resynchronize the 32-bit PC with the TB we need to execute next. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-04-17target-arm: Implement CBAR for Cortex-A57Peter Maydell
The Cortex-A57, like most of the other ARM cores, has a CBAR register which defines the base address of the per-CPU peripherals. However it has a 64-bit view as well as a 32-bit view; expand the QOM reset-cbar property from UINT32 to UINT64 so this can be specified, and implement the 32-bit and 64-bit views of a 64-bit CBAR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-04-17target-arm: Implement Cortex-A57 implementation-defined system registersPeter Maydell
Implement a subset of the Cortex-A57's implementation defined system registers. We provide RAZ/WI or reads-as-constant/writes-ignored implementations of the various control and syndrome reigsters. We do not implement registers which provide direct access to and manipulation of the L1 cache, since QEMU doesn't implement caches. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-04-17target-arm: Remove THUMB2EE feature from AArch64 'any' CPUPeter Maydell
The AArch64 usermode 'any' CPU type was accidentally specified with the ARM_FEATURE_THUMB2EE bit set. This is incorrect since ARMv8 removes Thumb2EE completely. Since we never implemented Thumb2EE anyway having the feature bit set was fairly harmless for user-mode, but the correct thing is to not set it at all. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-04-17target-arm: Add Cortex-A57 processorPeter Maydell
Add Cortex-A57 processor. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-04-17target-arm: Implement AArch64 EL1 exception handlingRob Herring
Implement exception handling for AArch64 EL1. Exceptions from AArch64 or AArch32 EL0 are supported. Signed-off-by: Rob Herring <rob.herring@linaro.org> [PMM: fixed minor style nits; updated to match changes in previous patches; added some of the simpler cases of illegal-exception-return support] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-04-17target-arm: A64: Implement DC ZVAPeter Maydell
Implement the DC ZVA instruction, which clears a block of memory. The fast path obtains a pointer to the underlying RAM via the TCG TLB data structure so we can do a direct memset(), with fallback to a simple byte-store loop in the slow path. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net> Acked-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-02-26target-arm: A64: Make cache ID registers visible to AArch64Peter Maydell
Make the cache ID system registers (CLIDR, CSSELR, CCSIDR, CTR) visible to AArch64. These are mostly simple 64-bit extensions of the existing 32 bit system registers and so can share reginfo definitions. CTR needs to have a split definition, but we can clean up the temporary user-mode implementation in favour of using the CPU-specified reset value, and implement the system-mode-required semantics of restricting its EL0 accessibility if SCTLR.UCT is not set. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
2014-01-14target-arm: Switch ARMCPUInfo arrays to use terminator entriesPeter Maydell
Switch the ARMCPUInfo arrays in cpu.c and cpu64.c to use a terminator entry rather than looping based on ARRAY_SIZE. The latter causes compile warnings on some versions of gcc if the configure options happen to result in an empty array. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-01-08target-arm: fix build with gcc 4.8.2Michael S. Tsirkin
commit 5ce4f35781028ce1aee3341e6002f925fdc7aaf3 "target-arm: A64: add set_pc cpu method" introduces an array aarch64_cpus which is zero size if this code is built without CONFIG_USER_ONLY. In particular an attempt to iterate over this array produces a warning under gcc 4.8.2: CC aarch64-softmmu/target-arm/cpu64.o /scm/qemu/target-arm/cpu64.c: In function ‘aarch64_cpu_register_types’: /scm/qemu/target-arm/cpu64.c:124:5: error: comparison of unsigned expression < 0 is always false [-Werror=type-limits] for (i = 0; i < ARRAY_SIZE(aarch64_cpus); i++) { ^ cc1: all warnings being treated as errors This is the result of ARRAY_SIZE being an unsigned type, causing "i" to be promoted to unsigned int as well. As zero size arrays are a gcc extension, it seems cleanest to add a dummy element with NULL name, and test for it during registration. We'll be able to drop this when we add more CPUs. Cc: Alexander Graf <agraf@suse.de> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20131223145216.GA22663@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-12-17target-arm: A64: add set_pc cpu methodAlexander Graf
When executing translation blocks we need to be able to recover our program counter. Add a method to set it for AArch64 CPUs. This covers user-mode, but for system mode emulation we will need to check if the CPU is in an AArch32 execution state. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <rth@twiddle.net>
2013-09-10target-arm: Add AArch64 gdbstub supportAlexander Graf
We want to be able to debug AArch64 guests. So let's add the respective gdb stub functions and xml descriptions that allow us to do so. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-12-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-6-git-send-email-john.rigby@linaro.org [PMM: dropped unused fp regs XML for now; moved 64 bit only functions to new gdbstub64.c; these are hooked up in AArch64CPU, not via ifdefs in ARMCPU] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10target-arm: Add AArch64 translation stubAlexander Graf
We should translate AArch64 mode separately from AArch32 mode. In AArch64 mode, registers look vastly different, instruction encoding is completely different, basically the system turns into a different machine. So let's do a simple if() in translate.c to decide whether we can handle the current code in the legacy AArch32 code or in the new AArch64 code. So far, the translation always complains about unallocated instructions. There is no emulator functionality in this patch! Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: John Rigby <john.rigby@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-11-git-send-email-peter.maydell@linaro.org Message-id: 1368505980-17151-5-git-send-email-john.rigby@linaro.org [PMM: * provide no-op versions of a64 functions ifndef TARGET_AARCH64; this lets us avoid #ifdefs in translate.c * insert the missing call to disas_a64_insn() * stash the insn in the DisasContext rather than reloading it in real_unallocated_encoding() ] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-10target-arm: Add new AArch64CPUInfo base class and subclassesPeter Maydell
Create a new AArch64CPU class; all 64-bit capable ARM CPUs are subclasses of this. (Currently we only support one, the "any" CPU used by linux-user.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1378235544-22290-8-git-send-email-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-16 06:55:42 +0000