aboutsummaryrefslogtreecommitdiff
path: root/stubs
AgeCommit message (Collapse)Author
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-06-18monitor: Replace monitor_init() with monitor_init_{hmp, qmp}()Kevin Wolf
Most callers know which monitor type they want to have. Instead of calling monitor_init() with flags that can describe both types of monitors, make monitor_init_{hmp,qmp}() public interfaces that take specific bools instead of flags and call these functions directly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20190613153405.24769-15-kwolf@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-17monitor: Fix return type of monitor_fdset_dup_fd_findYury Kotov
monitor_fdset_dup_fd_find_remove() and monitor_fdset_dup_fd_find() return mon_fdset->id which is int64_t. Downcasting from int64_t to int leads to a bug with removing fd from fdset with id >= 2^32. So, fix return types for these function. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523094433.30297-1-yury-kotov@yandex-team.ru> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-05-28semihosting: enable chardev backed output for consoleAlex Bennée
It will be useful for a number of use-cases to be able to re-direct output to a file like we do with serial output. This does the wiring to allow us to treat then semihosting console like just another character output device. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2019-05-28semihosting: introduce CONFIG_SEMIHOSTINGAlex Bennée
There isn't much point building semihosting for platforms that don't support it. Introduce a new symbol and enable it only for the softmmu targets that need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-24hw/display/ramfb: initialize fw-config space with xres/ yresHou Qiming
If xres / yres were specified in QEMU command line, write them as an initial resolution to the fw-config space on guest reset, which a later BIOS / OVMF patch can take advantage of. Signed-off-by: HOU Qiming <hqm03ster@gmail.com> Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-id: 20190513115731.17588-4-marcel.apfelbaum@gmail.com [fixed malformed patch] Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-05-23hw/nvram/fw_cfg: Add fw_cfg_arch_key_name()Philippe Mathieu-Daudé
Add fw_cfg_arch_key_name() which returns the name of an architecture-specific key. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190422195020.1494-3-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-04-18qemu-print: New qemu_printf(), qemu_vprintf() etc.Markus Armbruster
We commonly want to print to the current monitor if we have one, else to stdout/stderr. For stderr, have error_printf(). For stdout, all we have is monitor_vfprintf(), which is rather unwieldy. We often print to stderr just because error_printf() is easier. New qemu_printf() and qemu_vprintf() do exactly what's needed. The next commits will put them to use. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417190641.26814-12-armbru@redhat.com>
2019-04-18monitor error: Make printf()-like functions return a valueMarkus Armbruster
printf() & friends return the number of characters written on success, negative value on error. monitor_printf(), monitor_vfprintf(), monitor_vprintf(), error_printf(), error_printf_unless_qmp(), error_vprintf(), and error_vprintf_unless_qmp() return void. Some of them carry a TODO comment asking for int instead. Improve them to return int like printf() does. This makes our use of monitor_printf() as fprintf_function slightly less dirty: the function cast no longer adds a return value that isn't there. It still changes a parameter's pointer type. That will be addressed in a future commit. monitor_vfprintf() always returns zero. Improve it to return the proper value. Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190417190641.26814-11-armbru@redhat.com>
2019-03-06exec: Change RAMBlockIterFunc definitionYury Kotov
Currently, qemu_ram_foreach_* calls RAMBlockIterFunc with many block-specific arguments. But often iter func needs RAMBlock*. This refactoring is needed for fast access to RAMBlock flags from qemu_ram_foreach_block's callback. The only way to achieve this now is to call qemu_ram_block_from_host (which also enumerates blocks). So, this patch reduces complexity of qemu_ram_foreach_block() -> cb() -> qemu_ram_block_from_host() from O(n^2) to O(n). Fix RAMBlockIterFunc definition and add some functions to read RAMBlock* fields witch were passed. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-2-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-02-18qapi: make query-cpu-definitions depend on specific targetsMarc-André Lureau
It depends on TARGET_PPC || TARGET_ARM || TARGET_I386 || TARGET_S390X. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-15-armbru@redhat.com>
2019-02-18qapi: make query-cpu-model-expansion depend on s390 or x86Marc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-14-armbru@redhat.com>
2019-02-18qapi: make s390 commands depend on TARGET_S390XMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-11-armbru@redhat.com>
2019-02-18qapi: Generate QAPIEvent stuff into separate filesMarkus Armbruster
Having to include qapi-events.h just for QAPIEvent is suboptimal, but quite tolerable now. It'll become problematic when we have events conditional on the target, because then qapi-events.h won't be usable from target-independent code anymore. Avoid that by generating it into separate files. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190214152251.2073-6-armbru@redhat.com>
2019-02-07slirp: replace global polling with per-instance & notifierMarc-André Lureau
Remove hard-coded dependency on slirp in main-loop, and use a "poll" notifier instead. The notifier is registered per slirp instance. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: replace qemu_set_nonblock()Marc-André Lureau
Replace qemu_set_nonblock() with slirp_set_nonblock() qemu_set_nonblock() does some event registration with the main loop. Add a new callback register_poll_fd() for that reason. Always build the fd-register stub, to avoid #if WIN32. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-01-24qapi: Eliminate indirection through qmp_event_get_func_emit()Markus Armbruster
The qapi_event_send_FOO() functions emit events like this: QMPEventFuncEmit emit; emit = qmp_event_get_func_emit(); if (!emit) { return; } qmp = qmp_event_build_dict("FOO"); [put event arguments into @qmp...] emit(QAPI_EVENT_FOO, qmp); The value of qmp_event_get_func_emit() depends only on the program: * In qemu-system-FOO, it's always monitor_qapi_event_queue. * In tests/test-qmp-event, it's always event_test_emit. * In all other programs, it's always null. This is exactly the kind of dependence the linker is supposed to resolve; we don't actually need an indirection. Note that things would fall apart if we linked more than one QAPI schema into a single program: each set of qapi_event_send_FOO() uses its own event enumeration, yet they share a single emit function. Which takes the event enumeration as an argument. Which one if there's more than one? More seriously: how does this work even now? qemu-system-FOO wants QAPIEvent, and passes a function taking that to qmp_event_set_func_emit(). test-qmp-event wants test_QAPIEvent, and passes a function taking that to qmp_event_set_func_emit(). It works by type trickery, of course: typedef void (*QMPEventFuncEmit)(unsigned event, QDict *dict); void qmp_event_set_func_emit(QMPEventFuncEmit emit); QMPEventFuncEmit qmp_event_get_func_emit(void); We use unsigned instead of the enumeration type. Relies on both enumerations boiling down to unsigned, which happens to be true for the compilers we use. Clean this up as follows: * Generate qapi_event_send_FOO() that call PREFIX_qapi_event_emit() instead of the value of qmp_event_set_func_emit(). * Generate a prototype for PREFIX_qapi_event_emit() into qapi-events.h. * PREFIX_ is empty for qapi/qapi-schema.json, and test_ for tests/qapi-schema/qapi-schema-test.json. It's qga_ for qga/qapi-schema.json, and doc-good- for tests/qapi-schema/doc-good.json, but those don't define any events. * Rename monitor_qapi_event_queue() to qapi_event_emit() instead of passing it to qmp_event_set_func_emit(). This takes care of qemu-system-FOO. * Rename event_test_emit() to test_qapi_event_emit() instead of passing it to qmp_event_set_func_emit(). This takes care of tests/test-qmp-event. * Add a qapi_event_emit() that does nothing to stubs/monitor.c. This takes care of all other programs that link code emitting QMP events. * Drop qmp_event_set_func_emit(), qmp_event_get_func_emit(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20181218182234.28876-3-armbru@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [Commit message typos fixed]
2019-01-18Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pci, pc, virtio: fixes, features tpm physical presence interface rsc support in virtio net ivshmem is removed misc cleanups and fixes all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Fri 18 Jan 2019 02:11:11 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (49 commits) migration: Use strnlen() for fixed-size string migration: Fix stringop-truncation warning hw/acpi: Use QEMU_NONSTRING for non NUL-terminated arrays block/sheepdog: Use QEMU_NONSTRING for non NUL-terminated arrays qemu/compiler: Define QEMU_NONSTRING acpi: update expected files hw: acpi: Fix memory hotplug AML generation error tpm: clear RAM when "memory overwrite" requested acpi: add ACPI memory clear interface acpi: build TPM Physical Presence interface acpi: expose TPM/PPI configuration parameters to firmware via fw_cfg tpm: allocate/map buffer for TPM Physical Presence interface tpm: add a "ppi" boolean property hw/misc/edu: add msi_uninit() for pci_edu_uninit() virtio: Make disable-legacy/disable-modern compat properties optional globals: Allow global properties to be optional virtio: virtio 9p really requires CONFIG_VIRTFS to work virtio: split virtio crypto bits from virtio-pci.h virtio: split virtio gpu bits from virtio-pci.h virtio: split virtio serial bits from virtio-pci ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-17acpi: build TPM Physical Presence interfaceStefan Berger
The TPM Physical Presence interface consists of an ACPI part, a shared memory part, and code in the firmware. Users can send messages to the firmware by writing a code into the shared memory through invoking the ACPI code. When a reboot happens, the firmware looks for the code and acts on it by sending sequences of commands to the TPM. This patch adds the ACPI code. It is similar to the one in EDK2 but doesn't assume that SMIs are necessary to use. It uses a similar datastructure for the shared memory as EDK2 does so that EDK2 and SeaBIOS could both make use of it. I extended the shared memory data structure with an array of 256 bytes, one for each code that could be implemented. The array contains flags describing the individual codes. This decouples the ACPI implementation from the firmware implementation. The underlying TCG specification is accessible from the following page. https://trustedcomputinggroup.org/tcg-physical-presence-interface-specification/ This patch implements version 1.30. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> [ Marc-André - ACPI code improvements and windows fixes ] Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2019-01-14net: do not depend on slirp internalsMarc-André Lureau
Only slirp/libslirp.h should be included. Instead of using some slirp declarations and utility functions directly, let's copy them in net/util.h. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-10-23Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-10-22' ↵Peter Maydell
into staging Error reporting patches for 2018-10-22 # gpg: Signature made Mon 22 Oct 2018 13:20:23 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2018-10-22: (40 commits) error: Drop bogus "use error_setg() instead" admonitions vpc: Fail open on bad header checksum block: Clean up bdrv_img_create()'s error reporting vl: Simplify call of parse_name() vl: Fix exit status for -drive format=help blockdev: Convert drive_new() to Error vl: Assert drive_new() does not fail in default_drive() fsdev: Clean up error reporting in qemu_fsdev_add() spice: Clean up error reporting in add_channel() tpm: Clean up error reporting in tpm_init_tpmdev() numa: Clean up error reporting in parse_numa() vnc: Clean up error reporting in vnc_init_func() ui: Convert vnc_display_init(), init_keyboard_layout() to Error ui/keymaps: Fix handling of erroneous include files vl: Clean up error reporting in device_init_func() vl: Clean up error reporting in parse_fw_cfg() vl: Clean up error reporting in mon_init_func() vl: Clean up error reporting in machine_set_property() vl: Clean up error reporting in chardev_init_func() qom: Clean up error reporting in user_creatable_add_opts_foreach() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-19tpm: Clean up error reporting in tpm_init_tpmdev()Markus Armbruster
Calling error_report() in a function that takes an Error ** argument is suspicious. tpm_init_tpmdev() does that, and then fails without setting an error. Its caller main(), via tpm_init() and qemu_opts_foreach(), is fine with it, but clean it up anyway. Cc: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.ibm.com> Message-Id: <20181017082702.5581-30-armbru@redhat.com>
2018-10-19replay: pass raw icount value to replay_save_clockPaolo Bonzini
This avoids lock recursion when REPLAY_CLOCK is called inside the timers spinlock. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-15stubs: add ramfbGerd Hoffmann
Needed to make sure code using ramfb (vfio) compiles properly even on platforms without fw_cfg (and therefore no ramfb) support. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-08-23qsp: track BQL callers explicitlyEmilio G. Cota
The BQL is acquired via qemu_mutex_lock_iothread(), which makes the profiler assign the associated wait time (i.e. most of BQL wait time) entirely to that function. This loses the original call site information, which does not help diagnose BQL contention. Fix it by tracking the callers explicitly. Signed-off-by: Emilio G. Cota <cota@braap.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-07-24tests: don't silence error reporting for all testsDaniel P. Berrangé
The test-vmstate test is a bit chatty because it triggers various expected failure scenarios and the code in question uses error_report instead of accepting 'Error **errp' parameters. To silence this test the stubs for error_vprintf() were changed to send errors via g_test_message() instead of stderr: commit 28017e010ddf6849cfa830e898da3e44e6610952 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Mon Oct 24 18:31:03 2016 +0200 tests: send error_report to test log Implement error_vprintf to send the output of error_report to the test log. This silences test-vmstate. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477326663-67817-3-git-send-email-pbonzini@redhat.com> Unfortunately this change has global impact across the entire test suite and means that when tests fail for unexpected reasons, the message is not displayed on stderr. eg when using &error_abort in a call the test merely prints Unexpected error in qcrypto_tls_session_check_certificate() at crypto/tlssession.c:280: and the actual error message is hidden, making it impossible to diagnose the failure. This is especially problematic in CI or build systems where it isn't possible to easily pass the --debug-log flag to tests and re-run with the test log visible. This change makes the previous big hammer much more nuanced, providing a flag in the stub error_vprintf() that can used on a per-test basis to silence the errors. Only the test-vmstate silences errors initially. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2018-07-23monitor: Fix unsafe sharing of @cur_mon among threadsPeter Xu
@cur_mon is null unless the main thread is running monitor code, either HMP code within monitor_read(), or QMP code within monitor_qmp_dispatch(). Use of @cur_mon outside the main thread is therefore unsafe. Most of its uses are in monitor command handlers. These run in the main thread. However, there are also uses hiding elsewhere, such as in error_vprintf(), and thus error_report(), making these functions unsafe outside the main thread. No such unsafe uses are known at this time. Regardless, this is an unnecessary trap. It's an ancient trap, though. More recently, commit cf869d53172 "qmp: support out-of-band (oob) execution" spiced things up: the monitor I/O thread assigns to @cur_mon when executing commands out-of-band. Having two threads save, set and restore @cur_mon without synchronization is definitely unsafe. We can end up with @cur_mon null while the main thread runs monitor code, or non-null while it runs non-monitor code. We could fix this by making the I/O thread not mess with @cur_mon, but that would leave the trap armed and ready. Instead, make @cur_mon thread-local. It's now reliably null unless the thread is running monitor code. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> [peterx: update subject and commit message written by Markus] Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180720033451.32710-1-peterx@redhat.com>
2018-06-27linux-aio: properly bubble up errors from initializationNishanth Aravamudan
laio_init() can fail for a couple of reasons, which will lead to a NULL pointer dereference in laio_attach_aio_context(). To solve this, add a aio_setup_linux_aio() function which is called early in raw_open_common. If this fails, propagate the error up. The signature of aio_get_linux_aio() was not modified, because it seems preferable to return the actual errno from the possible failing initialization calls. Additionally, when the AioContext changes, we need to associate a LinuxAioState with the new AioContext. Use the bdrv_attach_aio_context callback and call the new aio_setup_linux_aio(), which will allocate a new AioContext if needed, and return errors on failures. If it fails for any reason, fallback to threaded AIO with an error message, as the device is already in-use by the guest. Add an assert that aio_get_linux_aio() cannot return NULL. Signed-off-by: Nishanth Aravamudan <naravamudan@digitalocean.com> Message-id: 20180622193700.6523-1-naravamudan@digitalocean.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-06-18monitor: add lock to protect mon_fdsetsPeter Xu
Introduce a new global big lock for mon_fdsets. Take it where needed. The monitor_fdset_get_fd() handling is a bit tricky: now we need to call qemu_mutex_unlock() which might pollute errno, so we need to make sure the correct errno be passed up to the callers. To make things simpler, we let monitor_fdset_get_fd() return the -errno directly when error happens, then in qemu_open() we move it back into errno. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180608035511.7439-8-peterx@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-05-07pc-dimm: factor out MemoryDevice interfaceDavid Hildenbrand
On the qmp level, we already have the concept of memory devices: "query-memory-devices" Right now, we only support NVDIMM and PCDIMM. We want to map other devices later into the address space of the guest. Such device could e.g. be virtio devices. These devices will have a guest memory range assigned but won't be exposed via e.g. ACPI. We want to make them look like memory device, but not glued to pc-dimm. Especially, it will not always be possible to have TYPE_PC_DIMM as a parent class (e.g. virtio devices). Let's use an interface instead. As a first part, convert handling of - qmp_pc_dimm_device_list - get_plugged_memory_size to our new model. plug/unplug stuff etc. will follow later. A memory device will have to provide the following functions: - get_addr(): Necessary, as the property "addr" can e.g. not be used for virtio devices (already defined). - get_plugged_size(): The amount this device offers to the guest as of now. - get_region_size(): Because this can later on be bigger than the plugged size. - fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-2-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-03-20Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio,vhost,pci,pc: features, cleanups SRAT tables for DIMM devices new virtio net flags for speed/duplex post-copy migration support in vhost cleanups in pci Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 20 Mar 2018 14:40:43 GMT # gpg: using RSA key 281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: (51 commits) postcopy shared docs libvhost-user: Claim support for postcopy postcopy: Allow shared memory vhost: Huge page align and merge vhost+postcopy: Wire up POSTCOPY_END notify vhost-user: Add VHOST_USER_POSTCOPY_END message libvhost-user: mprotect & madvises for postcopy vhost+postcopy: Call wakeups vhost+postcopy: Add vhost waker postcopy: postcopy_notify_shared_wake postcopy: helper for waking shared vhost+postcopy: Resolve client address postcopy-ram: add a stub for postcopy_request_shared_page vhost+postcopy: Helper to send requests to source for shared pages vhost+postcopy: Stash RAMBlock and offset vhost+postcopy: Send address back to qemu libvhost-user+postcopy: Register new regions with the ufd migration/ram: ramblock_recv_bitmap_test_byte_offset postcopy+vhost-user: Split set_mem_table for postcopy vhost+postcopy: Transmit 'listen' to slave ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # scripts/update-linux-headers.sh
2018-03-20pc-dimm: make qmp_pc_dimm_device_list() sort devices by addressHaozhong Zhang
Make qmp_pc_dimm_device_list() return sorted by start address list of devices so that it could be reused in places that would need sorted list*. Reuse existing pc_dimm_built_list() to get sorted list. While at it hide recursive callbacks from callers, so that: qmp_pc_dimm_device_list(qdev_get_machine(), &list); could be replaced with simpler: list = qmp_pc_dimm_device_list(); * follow up patch will use it in build_srat() Signed-off-by: Haozhong Zhang <haozhong.zhang@intel.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> for ppc part Reviewed-by: Bharata B Rao <bharata@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-03-12replay: make locking visible outside replay codeAlex Bennée
The replay_mutex_lock/unlock/locked functions are now going to be used for ensuring lock-step behaviour between the two threads. Make them public API functions and also provide stubs for non-QEMU builds on common paths. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095242.1060.16601.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12vl: export machine_init_donePeter Xu
We have that variable but not exported. Export that so modules can have a way to poke on whether machine init has finished. Meanwhile, set that up even before calling the notifiers, so that notifiers who may depend on this field will get a correct answer. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180306053320.15401-2-peterx@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-02qapi: Empty out qapi-schema.jsonMarkus Armbruster
The previous commit improved compile time by including less of the generated QAPI headers. This is impossible for stuff defined directly in qapi-schema.json, because that ends up in headers that that pull in everything. Move everything but include directives from qapi-schema.json to new sub-module qapi/misc.json, then include just the "misc" shard where possible. It's possible everywhere, except: * monitor.c needs qmp-command.h to get qmp_init_marshal() * monitor.c, ui/vnc.c and the generated qapi-event-FOO.c need qapi-event.h to get enum QAPIEvent Perhaps we'll get rid of those some other day. Adding a type to qapi/migration.json now recompiles some 120 instead of 2300 out of 5100 objects. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-25-armbru@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Include qmp-commands.h exactly where neededMarkus Armbruster
Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-7-armbru@redhat.com> [OSX breakage fixed]
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2018-02-08stubs: Add stubs for ram block APIFam Zheng
These functions will be wanted by block-obj-y but the actual definition is in obj-y, so stub them to keep the linker happy. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180110091846.10699-2-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-10-25tpm: add stubsPhilippe Mathieu-Daudé
Commit c37cacabf22 moved tpm_cleanup() in the main loop exit, however this function is not available when compiling with --disable-tpm. Provides necessary stubs to keep code clean of #ifdef'fery. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20171023102903.256AF7456A0@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-09-14qmp: introduce query-memory-size-summary commandVadim Galitsyn
Add a new query-memory-size-summary command which provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup comments as per Igor's review Added 'of' from Vadim's reply
2017-09-08hw/acpi: Move acpi_set_pci_info to pcihpAnthony PERARD
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL being set on a PCI bus that supports ACPI hotplug. It should work regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen). So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation part from QEMU's ACPI table generator. To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs to be set, but this was done only when ACPI tables are built which is not needed for a Xen guest. The need for the property starts with commit "pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice" (f0c9d64a68b776374ec4732424a3e27753ce37b6). Adding find_i440fx into stubs so that mips-softmmu target can be built. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-15stubs: Add vm state change handler stubsFam Zheng
They will be used by BlockBackend code in block-obj-y, which doesn't always get linked with common-obj-y. Add stubs to keep ld happy. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170815130740.31229-2-famz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-05-17migration: Move check_migratable() into qdev.cJuan Quintela
The function is only used once, and nothing else in migration knows about objects. Create the function vmstate_device_is_migratable() in savem.c that really do the bit that is related with migration. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-17migration: Create migration/blocker.hJuan Quintela
This allows us to remove lots of includes of migration/migration.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-25move xen-hvm.c to hw/i386/xen/Anthony Xu
move xen-hvm.c to hw/i386/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25move xen-common.c to hw/xen/Anthony Xu
move xen-common.c to hw/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-03-14cpus: define QEMUTimerListNotifyCB for QEMU system emulationPaolo Bonzini
There is no change for now, because the callback just invokes qemu_notify_event. Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-03 13:16:36 +0000