aboutsummaryrefslogtreecommitdiff
path: root/stubs/Makefile.objs
AgeCommit message (Collapse)Author
2014-10-20block: Code motion to get rid of stubs/blockdev.cMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-09-25block: Keep DriveInfo alive until BlockDriverState diesMarkus Armbruster
If the BDS's refcnt > 0, drive_del() destroys the DriveInfo, but not the BDS. This can happen in three places: * Device model destruction during unplug: blockdev_auto_del() * Xen IDE unplug: pci_piix3_xen_ide_unplug() * drive_del command when no device model is attached: do_drive_del() The other callers of drive_del are on error paths where refcnt == 1. If the user somehow manages to plug in a device model using a BDS that has gone through drive_del(), the legacy configuration passed in DriveInfo doesn't reach the device model, and automatic deletion on unplug doesn't work. Worse, some device models such as scsi-disk crash when DriveInfo doesn't exist. This is theoretical; I didn't research an actual reproducer. The problem was introduced when we replaced DriveInfo reference counting by BDS reference counting in commit a94a3fa..fa510eb. Fix by keeping DriveInfo alive until its BDS dies. This affects qemu_drive_opts: now you can't reuse the same ID for new drive options until the BDS dies. Before, you could, but since the code always attempts to create a BDS with the same ID next, the enclosing operation "create a new drive" failed anyway. Different error path, same result. Unfortunately, the fix involves use of blockdev.c stuff from block.c, which is a layering violation. Fortunately, my forthcoming BlockBackend work will get rid of it again. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoît Canet <benoit.canet@nodalink.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-08-06backends: Introduce chr-testdevPaolo Bonzini
From: Paolo Bonzini <pbonzini@redhat.com> chr-testdev enables a virtio serial channel to be used for guest initiated qemu exits. hw/misc/debugexit already enables guest initiated qemu exits, but only for PC targets. chr-testdev supports any virtio-capable target. kvm-unit-tests/arm is already making use of this backend. Currently there is a single command implemented, "q". It takes a (prefix) argument for the exit code, thus an exit is implemented by writing, e.g. "1q", to the virtio-serial port. It can be used as: $QEMU ... \ -device virtio-serial-device \ -device virtserialport,chardev=ctd -chardev testdev,id=ctd or, use: $QEMU ... \ -device virtio-serial-device \ -device virtconsole,chardev=ctd -chardev testdev,id=ctd to bind it to virtio-serial port0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-06-24Merge remote-tracking branch 'remotes/qmp-unstable/queue/qmp' into stagingPeter Maydell
* remotes/qmp-unstable/queue/qmp: (43 commits) monitor: protect event emission monitor: protect outbuf and mux_out with mutex qemu-char: make writes thread-safe qemu-char: move pty_chr_update_read_handler around qemu-char: do not call chr_write directly qemu-char: introduce qemu_chr_alloc qapi event: clean up qapi event: convert QUORUM events qapi event: convert GUEST_PANICKED qapi event: convert BALLOON_CHANGE qmp: convert ACPI_DEVICE_OST event qapi event: convert SPICE events qapi event: convert VNC events qapi event: convert NIC_RX_FILTER_CHANGED qapi event: convert other BLOCK_JOB events qapi event: convert BLOCK_IMAGE_CORRUPTED qapi event: convert BLOCK_IO_ERROR and BLOCK_JOB_ERROR qapi event: convert DEVICE_TRAY_MOVED qapi event: convert DEVICE_DELETED qapi event: convert WATCHDOG ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-06-23qapi event: clean upWenchao Xia
Signed-off-by: Wenchao Xia <wenchaoqemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-06-23libqemustub: add more stubs for qemu-charNikolay Nikolaev
Additional stubs: - chr_baum_init - qemu_chr_open_spice_vmc - qemu_chr_open_spice_port Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19qmp: add query-memory-devices commandIgor Mammedov
... allowing to get state of present memory devices. Currently implemented only for PCDIMMDevice. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19libqemustub: add stubs to be able to use qemu-char.cNikolay Nikolaev
chardev depends on lots of external symbols that are not necessarily needed to be able to use, for example, 'socket chardev'. So add stubs for these functions: - bdrv_commit_all - qemu_chr_open_msmouse - is_daemonized - qemu_add_machine_init_done_notifier - monitor_init - qemu_notify_event - vc_init and this array: - serial_hds Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com> Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-04-25monitor: Remove unused monitor_print_filenameCole Robinson
Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-03-14blockdev: Refuse to open encrypted image unless pausedMarkus Armbruster
Opening an encrypted image takes an additional step: setting the key. Between open and the key set, the image must not be used. We have some protection against accidental use in place: you can't unpause a guest while we're missing keys. You can, however, hot-plug block devices lacking keys into a running guest just fine, or insert media lacking keys. In the latter case, notifying the guest of the insert is delayed until the key is set, which may suffice to protect at least some guests in common usage. This patch makes the protection apply in more cases, in a rather heavy-handed way: it doesn't let you open encrypted images unless we're in a paused state. It doesn't extend the protection to users other than the guest (block jobs?). Use of runstate_check() from block.c is disgusting. Best I can do right now. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-03-13main-loop: Suppress "I/O thread spun" warnings for qtestPeter Maydell
When running under qtest we don't actually have any vcpu threads to be starved, so the warning about the I/O thread spinning isn't relevant, and the way qtest manipulates the simulated clock means the warning is produced a lot as a false positive. Suppress it if qtest_enabled(), so 'make check' output is less noisy. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-02-26kvm: Introduce kvm_arch_irqchip_createChristoffer Dall
Introduce kvm_arch_irqchip_create an arch-specific hook in preparation for architecture-specific use of the device control API to create IRQ chips. Following patches will implement the ARM irqchip create method to prefer the device control API over the older KVM_CREATE_IRQCHIP API. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org> Message-id: 1392687720-26806-3-git-send-email-christoffer.dall@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2013-09-12scsi: prefer UUID to VM name for the initiator namePaolo Bonzini
The UUID is unique even across multiple hosts, thus it is better than a VM name even if it is less user-friendly. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-07-27cpu: Introduce CPUClass::gdb_core_xml_file for GDB_CORE_XMLAndreas Färber
Replace the GDB_CORE_XML define in gdbstub.c with a CPUClass field. Use first_cpu for qSupported and qXfer:features:read: for now. Add a stub for xml_builtin. Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-06-10dump: Move stubs into libqemustub.aAndreas Färber
This allows us to drop CONFIG_NO_CORE_DUMP with its indirect dependency on CONFIG_HAVE_CORE_DUMP. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-05-01cpu: Introduce cpu_resume(), for single CPUIgor Mammedov
Also add a stub for it, to make possible to use it in qom/cpu.c, which is shared with user emulators. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-03-01hw: move device-hotplug.o to toplevel, compile it oncePaolo Bonzini
The situation with device-hotplug.c is similar to qdev-monitor.c. Add a stub for pci_drive_hot_add, so that it can be compiled once, and move it out of hw/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-12stubs: fully replace qemu-tool.c and qemu-user.cPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-01-08libqemustub: sysbus_get_default() stubEduardo Habkost
The stub will be used on cases where sysbus.c is not compiled in (e.g. *-user). Note that code that uses NULL as the bus with qdev{_try,}_create() implicitly uses sysbus_get_default() as the bus, and will still require sysbus.c to be compiled in. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08libqemustub: vmstate register/unregister stubsEduardo Habkost
Add vmstate stub functions, so that qdev.o can be used without savevm.o when vmstate support is not necessary (i.e. by *-user). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-01-08libqemustub: Add qemu_[un]register_reset() stubsEduardo Habkost
This will be useful for code that don't call qemu_devices_reset() (e.g. *-user). If qemu_devices_reset() is never called, it means we don't need to keep track of the reset handler list. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2012-11-18build: replace weak symbols with a static libraryPaolo Bonzini
Weak symbols were a nice idea, but they turned out not to be a good one. Toolchain support is just too sparse, in particular llvm-gcc is totally broken. This patch uses a surprisingly low-tech approach: a static library. Symbols in a static library are always overridden by symbols in an object file. Furthermore, if you place each function in a separate source file, object files for unused functions will not be taken in. This means that each function can use all the dependencies that it needs (especially QAPI stuff such as error_setg). Thus, all stubs are placed in separate object files and put together in a static library. The library then is linked to all programs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 05:09:05 +0000