aboutsummaryrefslogtreecommitdiff
path: root/stubs/Makefile.objs
AgeCommit message (Collapse)Author
2019-05-28semihosting: introduce CONFIG_SEMIHOSTINGAlex Bennée
There isn't much point building semihosting for platforms that don't support it. Introduce a new symbol and enable it only for the softmmu targets that need it. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-23hw/nvram/fw_cfg: Add fw_cfg_arch_key_name()Philippe Mathieu-Daudé
Add fw_cfg_arch_key_name() which returns the name of an architecture-specific key. Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-Id: <20190422195020.1494-3-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-02-18qapi: make query-cpu-definitions depend on specific targetsMarc-André Lureau
It depends on TARGET_PPC || TARGET_ARM || TARGET_I386 || TARGET_S390X. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-15-armbru@redhat.com>
2019-02-18qapi: make query-cpu-model-expansion depend on s390 or x86Marc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-14-armbru@redhat.com>
2019-02-18qapi: make s390 commands depend on TARGET_S390XMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190214152251.2073-11-armbru@redhat.com>
2019-02-07slirp: replace global polling with per-instance & notifierMarc-André Lureau
Remove hard-coded dependency on slirp in main-loop, and use a "poll" notifier instead. The notifier is registered per slirp instance. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-02-07slirp: replace qemu_set_nonblock()Marc-André Lureau
Replace qemu_set_nonblock() with slirp_set_nonblock() qemu_set_nonblock() does some event registration with the main loop. Add a new callback register_poll_fd() for that reason. Always build the fd-register stub, to avoid #if WIN32. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2018-10-15stubs: add ramfbGerd Hoffmann
Needed to make sure code using ramfb (vfio) compiles properly even on platforms without fw_cfg (and therefore no ramfb) support. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2018-05-07pc-dimm: factor out MemoryDevice interfaceDavid Hildenbrand
On the qmp level, we already have the concept of memory devices: "query-memory-devices" Right now, we only support NVDIMM and PCDIMM. We want to map other devices later into the address space of the guest. Such device could e.g. be virtio devices. These devices will have a guest memory range assigned but won't be exposed via e.g. ACPI. We want to make them look like memory device, but not glued to pc-dimm. Especially, it will not always be possible to have TYPE_PC_DIMM as a parent class (e.g. virtio devices). Let's use an interface instead. As a first part, convert handling of - qmp_pc_dimm_device_list - get_plugged_memory_size to our new model. plug/unplug stuff etc. will follow later. A memory device will have to provide the following functions: - get_addr(): Necessary, as the property "addr" can e.g. not be used for virtio devices (already defined). - get_plugged_size(): The amount this device offers to the guest as of now. - get_region_size(): Because this can later on be bigger than the plugged size. - fill_device_info(): Fill MemoryDeviceInfo, e.g. for qmp. Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20180423165126.15441-2-david@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-02-08stubs: Add stubs for ram block APIFam Zheng
These functions will be wanted by block-obj-y but the actual definition is in obj-y, so stub them to keep the linker happy. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180110091846.10699-2-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-10-25tpm: add stubsPhilippe Mathieu-Daudé
Commit c37cacabf22 moved tpm_cleanup() in the main loop exit, however this function is not available when compiling with --disable-tpm. Provides necessary stubs to keep code clean of #ifdef'fery. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20171023102903.256AF7456A0@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2017-09-14qmp: introduce query-memory-size-summary commandVadim Galitsyn
Add a new query-memory-size-summary command which provides the following memory information in bytes: * base-memory - size of "base" memory specified with command line option -m. * plugged-memory - amount of memory that was hot-plugged. If target does not have CONFIG_MEM_HOTPLUG enabled, no value is reported. Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Signed-off-by: Mohammed Gamal <mohammed.gamal@profitbricks.com> Signed-off-by: Eduardo Otubo <eduardo.otubo@profitbricks.com> Signed-off-by: Vadim Galitsyn <vadim.galitsyn@profitbricks.com> Reviewed-by: Eugene Crosser <evgenii.cherkashin@profitbricks.com> Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: qemu-devel@nongnu.org Message-Id: <20170829153022.27004-3-vadim.galitsyn@profitbricks.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixup comments as per Igor's review Added 'of' from Vadim's reply
2017-09-08hw/acpi: Move acpi_set_pci_info to pcihpAnthony PERARD
HW part of ACPI PCI hotplug in QEMU depends on ACPI_PCIHP_PROP_BSEL being set on a PCI bus that supports ACPI hotplug. It should work regardless of the source of ACPI tables (QEMU generator/legacy SeaBIOS/Xen). So move ACPI_PCIHP_PROP_BSEL initialization into HW ACPI implementation part from QEMU's ACPI table generator. To do PCI passthrough with Xen, the property ACPI_PCIHP_PROP_BSEL needs to be set, but this was done only when ACPI tables are built which is not needed for a Xen guest. The need for the property starts with commit "pc: pcihp: avoid adding ACPI_PCIHP_PROP_BSEL twice" (f0c9d64a68b776374ec4732424a3e27753ce37b6). Adding find_i440fx into stubs so that mips-softmmu target can be built. Reported-by: Sander Eikelenboom <linux@eikelenboom.it> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-08-15stubs: Add vm state change handler stubsFam Zheng
They will be used by BlockBackend code in block-obj-y, which doesn't always get linked with common-obj-y. Add stubs to keep ld happy. Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20170815130740.31229-2-famz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2017-04-25move xen-hvm.c to hw/i386/xen/Anthony Xu
move xen-hvm.c to hw/i386/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-04-25move xen-common.c to hw/xen/Anthony Xu
move xen-common.c to hw/xen/ Signed-off -by: Anthony Xu <anthony.xu@intel.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
2017-03-02qmp/hmp: add query-vm-generation-id and 'info vm-generation-id' commandsIgor Mammedov
Add commands to query Virtual Machine Generation ID counter. QMP command example: { "execute": "query-vm-generation-id" } HMP command example: info vm-generation-id Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Ben Warren <ben@skyportsystems.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Tested-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-02-21block: move AioContext, QEMUTimer, main-loop to libqemuutilPaolo Bonzini
AioContext is fairly self contained, the only dependency is QEMUTimer but that in turn doesn't need anything else. So move them out of block-obj-y to avoid introducing a dependency from io/ to block-obj-y. main-loop and its dependency iohandler also need to be moved, because later in this series io/ will call iohandler_get_aio_context. [Changed copyright "the QEMU team" to "other QEMU contributors" as suggested by Daniel Berrange and agreed by Paolo. --Stefan] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Message-id: 20170213135235.12274-2-pbonzini@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-01-16stubs: remove stubs/kvm.cPaolo Bonzini
This has a single function, just move it to the other target/*/kvm.c files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16build: remove --enable-colo/--disable-coloPaolo Bonzini
No need to provide this knob, so remove it and stubs/migration-colo.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16event_notifier: cleanups around event_notifier_set_handlerPaolo Bonzini
Remove the useless is_external argument. Since the iohandler AioContext is never used for block devices, aio_disable_external is never called on it. This lets us remove stubs/iohandler.c. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move vhost stubs to stubs/vhost.oPaolo Bonzini
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: group all monitor_fdset_* functions in a single filePaolo Bonzini
It makes little sense to implement only one of them, so avoid proliferation of stubs files. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: group stubs for user-mode emulationPaolo Bonzini
Some stubs are used for user-mode emulation only; they are not needed by tools. Move them out of stubs/. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16hw: move reset handlers from vl.c to hw/corePaolo Bonzini
They are small, it is not worth stubbing them. Just include them in user-mode emulators and unit tests as well. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: remove unused stub for serial_hdPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move acpi stubs to hw/acpiPaolo Bonzini
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: move smbios stubs to hw/smbiosPaolo Bonzini
No need to include them in libqemustub.a, since only system emulators need them. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-16stubs: merge all monitor stubs in one file, remove monitor_cur_is_qmp stubPaolo Bonzini
monitor_cur_is_qmp was previously used by other stubs, but it's not since 397d30e ("qemu-error: remove dependency of stubs on monitor", 2016-11-01). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-11-01qemu-error: remove dependency of stubs on monitorPaolo Bonzini
Leave the implementation of error_vprintf and error_vprintf_unless_qmp (the latter now trivially wrapped by error_printf_unless_qmp) to libqemustub.a and monitor.c. This has two advantages: it lets us remove the monitor_printf and monitor_vprintf stubs, and it lets tests provide a different implementation of the functions that uses g_test_message. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477326663-67817-2-git-send-email-pbonzini@redhat.com>
2016-10-31Merge remote-tracking branch 'remotes/amit-migration/tags/migration-for-2.8' ↵Peter Maydell
into staging Migration bits from the COLO project # gpg: Signature made Sun 30 Oct 2016 10:39:55 GMT # gpg: using RSA key 0xEB0B4DFC657EF670 # gpg: Good signature from "Amit Shah <amit@amitshah.net>" # gpg: aka "Amit Shah <amit@kernel.org>" # gpg: aka "Amit Shah <amitshah@gmx.net>" # Primary key fingerprint: 48CA 3722 5FE7 F4A8 B337 2735 1E9A 3B5F 8540 83B6 # Subkey fingerprint: CC63 D332 AB8F 4617 4529 6534 EB0B 4DFC 657E F670 * remotes/amit-migration/tags/migration-for-2.8: MAINTAINERS: Add maintainer for COLO framework related files configure: Support enable/disable COLO feature docs: Add documentation for COLO feature COLO: Implement failover work for secondary VM COLO: Implement the process of failover for primary VM COLO: Introduce state to record failover process COLO: Add 'x-colo-lost-heartbeat' command to trigger failover COLO: Synchronize PVM's state to SVM periodically COLO: Add checkpoint-delay parameter for migrate-set-parameters COLO: Load VMState into QIOChannelBuffer before restore it COLO: Send PVM state to secondary side when do checkpoint COLO: Add a new RunState RUN_STATE_COLO COLO: Introduce checkpointing protocol COLO: Establish a new communicating path for COLO migration: Switch to COLO process after finishing loadvm migration: Enter into COLO mode after migration if COLO is enabled COLO: migrate COLO related info to secondary node migration: Introduce capability 'x-colo' to migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-10-30migration: Introduce capability 'x-colo' to migrationzhanghailiang
We add helper function colo_supported() to indicate whether colo is supported or not, with which we use to control whether or not showing 'x-colo' string to users, they can use qmp command 'query-migrate-capabilities' or hmp command 'info migrate_capabilities' to learn if colo is supported. The default value for COLO (COarse-Grain LOck Stepping) is disabled. Cc: Juan Quintela <quintela@redhat.com> Cc: Amit Shah <amit.shah@redhat.com> Cc: Eric Blake <eblake@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com> Signed-off-by: Gonglei <arei.gonglei@huawei.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amit Shah <amit@amitshah.net>
2016-10-28aio: introduce qemu_get_current_aio_contextPaolo Bonzini
This will be used by BDRV_POLL_WHILE (and thus by bdrv_drain) to choose how to wait for I/O completion. Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1477565348-5458-12-git-send-email-pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2016-09-06qmp: add QMP interface "query-cpu-model-baseline"David Hildenbrand
Let's provide a standardized interface to baseline two CPU models, to create a third, compatible one. This is especially helpful when two CPU models are not identical, but a CPU model is required that is guaranteed to run under both configurations, where the original models run. "query-cpu-model-baseline" takes two CPU models and returns a third, compatible model. The result will always be a static CPU model. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-28-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06qmp: add QMP interface "query-cpu-model-comparison"David Hildenbrand
Let's provide a standardized interface to compare two CPU models. "query-cpu-model-compare" takes two models and returns how they compare in a specific configuration. The result will give guarantees about runnability. E.g. if a CPU model A is a subset of CPU model B, model A is guaranteed to run in configurations where model B runs, but not the other way around (might or might not run). Usually, CPU features or CPU generations are used to calculate the result. If a model is not guaranteed to run in a certain environment (e.g. incompatible), a compatible one can be created by "baselining" both models (follow up patch). Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-27-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-09-06qmp: add QMP interface "query-cpu-model-expansion"David Hildenbrand
Let's provide a standardized interface to expand CPU models. This interface can be used by tooling to get details about a specific CPU model in a certain configuration, e.g. about the "host" model. To take care of all architectures, two detail levels for an expansion are introduced. Certain architectures might not support all detail levels. While "full" will expand and indicate all relevant properties/features of a CPU model, "static" expands to a static base CPU model, that will never change between QEMU versions and therefore have the same features when used under different compatibility machines. Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Message-Id: <20160905085244.99980-26-dahi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-07-18trace: Add per-vCPU tracing states for events with the 'vcpu' propertyLluís Vilanova
Each vCPU gets a 'trace_dstate' bitmap to control the per-vCPU dynamic tracing state of events with the 'vcpu' property. Signed-off-by: Lluís Vilanova <vilanova@ac.upc.edu> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2016-06-24pc: acpi: introduce AcpiDeviceIfClass.madt_cpu hookIgor Mammedov
Add madt_cpu callback to AcpiDeviceIfClass and use it for generating LAPIC MADT entries for CPUs. Later it will be used for generating x2APIC entries in case of more than 255 CPUs and also would be reused by ARM target when ACPI CPU hotplug is introduced there. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24acpi: Add IPMI table entriesCorey Minyard
Use the ACPI table construction tools to create an ACPI entry for IPMI. This adds a function called build_acpi_ipmi_devices to add an DSDT entry for IPMI if IPMI is compiled in and an IPMI device exists. It also adds a dummy function if IPMI is not compiled in. This conforms to section "C3-2 Locating IPMI System Interfaces in ACPI Name Space" in the IPMI 2.0 specification. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-06-24ipmi: Add SMBIOS table entryCorey Minyard
Add an IPMI table entry to the SMBIOS. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-04-22iohandler: Introduce iohandler_get_aio_contextFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17block: Add bdrv_next_monitor_owned()Max Reitz
Add a function for iterating over all monitor-owned BlockDriverStates so the generic block layer can do so. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-17block: Move some bdrv_*_all() functions to BBMax Reitz
Move bdrv_commit_all() and bdrv_flush_all() to the BlockBackend level. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-02-02blockdev: Keep track of monitor-owned BDSMax Reitz
As a side effect, we can now make x-blockdev-del's check whether a BDS is actually owned by the monitor explicit. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12monitor/target-ppc: Define target_get_monitor_defAlexey Kardashevskiy
At the moment get_monitor_def() returns only registers from statically defined monitor_defs array. However there is a lot of BOOK3S SPRs which are not in the list and cannot be printed from the monitor. This adds a new target platform hook - target_get_monitor_def(). The hook is called if a register was not found in the static array returned by the target_monitor_defs() hook. The hook is only defined for POWERPC, it returns registered SPRs and fails on unregistered ones providing the user with information on what is actually supported on the running CPU. The register value is saved as uint64_t as it is the biggest supported register size; target_ulong cannot be used because of the stub - it is in a "common" code and cannot include "cpu.h", etc; this is also why the hook prototype is redefined in the stub instead of being included from some header. This replaces static descriptors for GPRs, FPRs, SRs with a helper which looks for a value in a corresponding array in the CPUPPCState. The immediate effect is that all 32 SRs can be printed now (instead of 16); later this can be reused for VSX or TM registers. This replaces callbacks for MSR and XER with static descriptors in monitor_defs as they are stored in CPUPPCState. While we are here, this adds "cr" as a synonym of "ccr". Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2015-11-05replay: global variables and function stubsPavel Dovgalyuk
This patch adds global variables, defines, function declarations, and function stubs for deterministic VM replay used by external modules. Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20150917162337.8676.41538.stgit@PASHA-ISP.def.inno> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-22Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
vhost, pc, virtio features, fixes, cleanups New features: VT-d support for devices behind a bridge vhost-user migration support Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 22 Oct 2015 12:39:19 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (37 commits) hw/isa/lpc_ich9: inject the SMI on the VCPU that is writing to APM_CNT i386: keep cpu_model field in MachineState uptodate vhost: set the correct queue index in case of migration with multiqueue piix: fix resource leak reported by Coverity seccomp: add memfd_create to whitelist vhost-user-test: check ownership during migration vhost-user-test: add live-migration test vhost-user-test: learn to tweak various qemu arguments vhost-user-test: wrap server in TestServer struct vhost-user-test: remove useless static check vhost-user-test: move wait_for_fds() out vhost: add migration block if memfd failed vhost-user: use an enum helper for features mask vhost user: add rarp sending after live migration for legacy guest vhost user: add support of live migration net: add trace_vhost_user_event vhost-user: document migration log vhost: use a function for each call vhost-user: add a migration blocker vhost-user: send log shm fd along with log_base ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-10-22vhost: add vhost_has_free_slot() interfaceIgor Mammedov
it will allow for other parts of QEMU check if it's safe to map memory region during hotplug/runtime. That way hotplug path will have a chance to cancel hotplug operation instead of crashing in vhost_commit(). Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-10-19qemu-char: convert vc backend to data-driven creationPaolo Bonzini
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2015-10-19qemu-char: convert spice backend to data-driven creationPaolo Bonzini
Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 22:29:26 +0000