| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Calling gettimeofday() to compute a time interval can cause problems if
the system clock jumps forwards or backwards; replace updtime() with
qemu_get_clock(rt_clock), which calls clock_gettime(CLOCK_MONOTONIC) if
it is available.
Also remove some useless macros.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The UDP emulation code for talk has been commented out since the
beginning of time, and unless someone who runs CU-SeeMe on qemu with
user-mode networking can vouch that the special magic (a) is necessary
and (b) works, let's get rid of the code.
Signed-off-by: Ed Swierk <eswierk@aristanetworks.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Unless a virtual server address was explicitly defined (which is
impossible with the legacy -net channel format), guestfwd did not
properly forwarded host->guest packets. This patch fixes it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
[ Applies on top of my recently posted slirp series. ]
Allow tftp requests with filenames that do not start with a slash.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Once again this was a long journey to reach the destination: Allow to
instantiate slirp multiple times. But as in the past, the journey was
worthwhile, cleaning up, fixing and enhancing various parts of the user
space network stack along the way.
What is this particular change good for? Multiple slirps instances
allow separated user space networks for guests with multiple NICs. This
is already possible, but without any slirp support for the second
network, ie. without a chance to talk to that network from the host via
IP. We have a legacy guest system here that benefits from this slirp
enhancement, allowing us to run both of its NICs purely over
unprivileged user space IP stacks.
Another benefit of this patch is that it simply removes an artificial
restriction of the configuration space qemu is providing, avoiding
another source of surprises that users may face when playing with
possible setups.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Allocate the internal slirp state dynamically and provide and call
slirp_cleanup to properly release it after use. This patch finally
unbreaks slirp release and re-instantiation via host_net_* monitor
commands.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This now also exports the internal state to the slirp users in qemu,
returning it from slirp_init and expecting it along with service
invocations. Additionally provide an opaque value interface for the
callbacks from slirp into the qemu core.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The essence of this patch is to stuff (almost) all global variables of
the slirp stack into the structure Slirp. In this step, we still keep
the structure as global variable, directly accessible by the whole
stack. Changes to the external interface of slirp will be applied in
the following patches.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
link_up is true once slirp is initialized, so these check are really not
required.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Again lot of dead code. Remove it.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Avoid the need for slirp_is_inited by refactoring the protected
slirp_select_* functions. This also avoids the clearing of all fd sets
on select errors.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Drop redundant typecasts in both variants and remove the pointless
round-up in the UNIX version.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Currently, ip_id is always initialized to 0 on slirp startup (despite
the broken attempt to derive it from the clock). This is good for
reproducibility. But it is not preserved across save/restore. This patch
therefore drops the dead initialization code from ip_init and introduces
ip_id to the persistent slirp state.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
In order to prepare re-initialization and multi-instance slirp, factor
out init code that is of global scope and (at least for now) only need
to be run once.
This also fixes the potentially uninitialized use of our_addr in
get_dns_addr.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This changes the filename handling from a static buffer in tftp_session
for the client-provided name + prefix to a dynamically allocated buffer
that keeps the combined path in one place.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Specifically make the filename extraction more readable, and always
report errors back to the client.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The return code of tftp_send_error is not used, drop it. And also make
sure to always terminate the session.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Perform check for set prefix early (if it's not given, tftp is disabled)
and drop redundant second check.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
As agreed on the mailing list, there is no interest in keeping the
usually disabled slirp statistics in the tree. So this patch removes
them.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
After all its years inside the qemu tree, there is no point in keeping
the dead code paths of slirp. This patch is a first round of removing
usually commented out code parts. More cleanups need to follow (and
maybe finally a proper reindention).
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Break out sockstats from the slirp statistics and present them under the
new info category "usernet". This patch also improves the current output
/wrt proper reporting connection source and destination.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Required for pretty-printing.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Prevent that the users accidentally shoots down dynamic sockets. This
allows to remove looping for removals as there can now only be one
match.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Mark sockets that describe host forwardings. This is required for their
(and only their) proper deletion and for pretty-printing.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This prepares for adding flags to socket.so_state that must not be
removed during the lifetime of a socket.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Extend the hostfwd rule format so that the user can specify on which
host interface qemu should listen for incoming connections. If omitted,
binding will takes place against all interfaces.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
For UDP host forwardings, fport is not stable, every outgoing packet of
the redirection can modify it. Use getsockname instead to look up the
port that is actually used on the host side.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
With the internal IP configuration made more flexible, we can now
enhance the user interface. This patch adds a number of new options to
"-net user": net (address and mask), host, dhcpstart, dns and smbserver.
It also renames "redir" to "hostfwd" and "channel" to "guestfwd" in
order to (hopefully) clarify their meanings. The format of guestfwd is
extended so that the user can define not only the port but also the
virtual server's IP address the forwarding starts from.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The user mode IP stack is currently only minimally configurable /wrt to
its virtual IP addresses. This is unfortunate if some guest has a fixed
idea of which IP addresses to use.
Therefore this patch prepares the stack for fully configurable IP
addresses and masks. The user interface and default addresses remain
untouched in this step, they will be enhanced in the following patch.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
So far a couple of slirp-related parameters were expressed via
stand-alone command line options. This it inconsistent and unintuitive.
Moreover, it prevents both dynamically reconfigured (host_net_add/
delete) and multi-instance slirp.
This patch refactors the configuration by turning -smb, -redir, -tftp
and -bootp as well as -net channel into options of "-net user". The old
stand-alone command line options are still processed, but no longer
advertised. This allows smooth migration of management applications to
to the new syntax and also the extension of that syntax later in this
series.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This reverts commit 1c6ed9f3379faac83da0ed3e95cbd49003ac0dd1.
It's redundant to slirp statistics, which are going to be split up /
reworked later on.
Conflicts:
monitor.c
net.c
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
The socket faddr/fport is already updated a few lines below, so these
are completely redundant.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Work around buffer and ioctlsocket argument type signedness problems
Suppress a prototype which is unused on mingw32
Expand a macro to avoid warnings from some GCC versions
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This patch reorders the initialization of slirp itself as well as its
associated features smb and redirection. So far the first reference to
slirp triggered the initialization, independent of the actual -net user
option which may carry additional parameters. Now we save any request to
add a smb export or some redirections until the actual initialization of
the stack. This also allows to move a few parameters that were passed
via global variable into the argument list of net_slirp_init.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Mark McLoughlin <markmc@redhat.com>
|
|
In case you're wondering what connections exactly you have open
or maybe redir'ed in the past, you can't really find out from qemu
right now.
This patch enables you to see all current connections the host
only networking holds open, so you can kill them using the previous
patch.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Using the new host_net_redir command you can easily create redirections
on the fly while your VM is running.
While that's great, it's missing the removal of redirections, in case you
want to have a port closed again at a later point in time.
This patch adds support for removal of redirections.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
In case a client restarts a DHCP recovery without releasing its old
address, reassign the same address to prevent consuming free addresses
and moving away from the standard client address.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
|
|
from producing a warning about pointer type mismatches with Winsock
Signed-off-by: malc <av1474@comtv.ru>
|
|
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This adds proper handling of the ciaddr field as well as the "Requested
IP Address" option to slirp's DHCP server. If the client requests an
invalid or used IP, a NAK reply is sent, if it requests a specific but
valid IP, this is now respected.
NAK'ing invalid IPs is specifically useful when changing the slirp IP
range via '-net user,ip=...' while the client saved its previously used
address and tries to reacquire it. Now this will be NAK'ed and the
client will start a new discovery round.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7176 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7174 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6984 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6856 c046a42c-6fe2-441c-8c8c-71466251a162
|
