aboutsummaryrefslogtreecommitdiff
path: root/slirp
AgeCommit message (Collapse)Author
2010-07-06savevm: Add DeviceState paramAlex Williamson
When available, we'd like to be able to access the DeviceState when registering a savevm. For buses with a get_dev_path() function, this will allow us to create more unique savevm id strings. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-04-25Remove dead assignments in various common files, spotted by clang analyzerBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-20slirp: fix structure initialization in tcp_listen()Juha Riihimäki
A data structure of type sockaddr_in is allocated from stack but not properly initialized. This may lead to a failure in the bind() call later on. Fixed by filling the contents of the structure with zeroes before using it. Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-18slirp: fix unused return value, spotted by clangBlue Swirl
Fix clang errors like: CC slirp/cksum.o /src/qemu/slirp/cksum.c:78:3: error: expression result unused [-Wunused-value] REDUCE; /src/qemu/slirp/cksum.c:45:66: note: instantiated from: Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-16monitor: Separate "default monitor" and "current monitor" cleanlyMarkus Armbruster
Commits 376253ec..731b0364 introduced global variable cur_mon, which points to the "default monitor" (if any), except during execution of monitor_read() or monitor_control_read() it points to the monitor from which we're reading instead (the "current monitor"). Monitor command handlers run within monitor_read() or monitor_control_read(). Default monitor and current monitor are really separate things, and squashing them together is confusing and error-prone. For instance, usb_host_scan() can run both in "info usbhost" and periodically via usb_host_auto_check(). It prints to cur_mon, which is what we want in the former case: the monitor executing "info usbhost". But since that's the default monitor in the latter case, it periodically spams the default monitor there. A few places use cur_mon to log stuff to the default monitor. If we ever log something while cur_mon points to current monitor instead of default monitor, the log temporarily "jumps" to another monitor. Whether that can or cannot happen isn't always obvious. Maybe logging to the default monitor (which may not even exist) is a bad idea, and we should log to stderr or a logfile instead. But that's outside the scope of this commit. Change cur_mon to point to the current monitor. Create new default_mon to point to the default monitor. Update users of cur_mon accordingly. This fixes the periodical spamming of the default monitor by usb_host_scan(). It also stops "log jumping", should that problem exist.
2010-03-07slirp: remove dead nested assignment, spotted by clangBlue Swirl
Although the value stored to 'r' is used in the enclosing expression, the value is never actually read from 'r'. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-07slirp: remove dead initialization, spotted by clangBlue Swirl
Value stored during initialization is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-07slirp: remove dead increments, spotted by clangBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-07slirp: remove dead assignments, spotted by clangBlue Swirl
Value stored is never read. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-02-10don't dereference NULL after failed strdupJim Meyering
Most of these are obvious NULL-deref bug fixes, for example, the ones in these files: block/curl.c net.c slirp/misc.c and the first one in block/vvfat.c. The others in block/vvfat.c may not lead to an immediate segfault, but I traced the two schedule_rename(..., strdup(path)) uses, and a failed strdup would appear to trigger this assertion in handle_renames_and_mkdirs: assert(commit->path); The conversion to use qemu_strdup in envlist_to_environ is not technically needed, but does avoid a theoretical leak in the caller when strdup fails for one value, but later succeeds in allocating another buffer(plausible, if one string length is much larger than the others). The caller does not know the length of the returned list, and as such can only free pointers until it hits the first NULL. If there are non-NULL pointers beyond the first, their buffers would be leaked. This one is admittedly far-fetched. The two in linux-user/main.c are worth fixing to ensure that an OOM error is diagnosed up front, rather than letting it provoke some harder-to-diagnose secondary error, in case of exec failure, or worse, in case the exec succeeds but with an invalid list of command line options. However, considering how unlikely it is to encounter a failed strdup early in main, this isn't a big deal. Note that adding the required uses of qemu_strdup here and in envlist.c induce link failures because qemu_strdup is not currently in any library they're linked with. So for now, I've omitted those changes, as well as the fixes in target-i386/helper.c and target-sparc/helper.c. If you'd like to see the above discussion (or anything else) in the commit log, just let me know and I'll be happy to adjust. >From 9af42864fd1ea666bd25e2cecfdfae74c20aa8c7 Mon Sep 17 00:00:00 2001 From: Jim Meyering <meyering@redhat.com> Date: Mon, 8 Feb 2010 18:29:29 +0100 Subject: [PATCH] don't dereference NULL after failed strdup Handle failing strdup by replacing each use with qemu_strdup, so as not to dereference NULL or trigger a failing assertion. * block/curl.c (curl_open): s/\bstrdup\b/qemu_strdup/ * block/vvfat.c (init_directories): Likewise. (get_cluster_count_for_direntry, check_directory_consistency): Likewise. * net.c (parse_host_src_port): Likewise. * slirp/misc.c (fork_exec): Likewise. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-07Do not use dprintfmalc
dprintf is already claimed by POSIX[1], and on at least one system is implemented as a macro [1] http://www.opengroup.org/onlinepubs/9699919799/functions/dprintf.html Signed-off-by: malc <av1474@comtv.ru>
2010-01-13Qemu's internal TFTP server breaks lock-step-iness of TFTPMilan Plzik
According to RFC 1350 and RFC 2347, TFTP server should answer RRQ by either OACK or DATA packet. Qemu's internal TFTP server answers RRQ with additional options by sending both OACK and DATA packet, thus breaking the "lock-step" feature of the protocol, and also confuses client. Proposed solution would be to, in case of OACK packet, wait for ACK from client and just then start sending data. Attached patch implements this. Signed-off-by: Thomas Horsten <thomas@horsten.com> Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-01-11Handle TFTP ERROR from clientThomas Horsten
If a PXE client only wants to find out the size of a file, it will open the file and then abort the transfer by sending a TFTP ERROR packet. The ERROR packet should cause qemu to terminate the session. If not, the sessions will soon run out and cause timeouts in the client. Also, if a TFTP session already exists with same IP/UDP port, it should be terminated when a new RRQ is received, instead of creating a duplicate (which will never be used). A patch for gPXE to send the ERROR packet is also being submitted to gPXE. Together they resolve slowness/hanging when booting pxegrub from qemu's internal TFTP server. The patch from Milan Plzik to return after sending OACK is also required for a complete fix. Signed-off-by: Thomas Horsten <thomas@horsten.com> Signed-off-by: Milan Plzik <milan.plzik@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-25slirp/misc.c: fix warning with _FORTIFY_SOURCEKirill A. Shutemov
CC slirp/misc.o cc1: warnings being treated as errors slirp/misc.c: In function 'fork_exec': slirp/misc.c:209: error: ignoring return value of 'write', declared with attribute warn_unused_result make: *** [slirp/misc.o] Error 1 Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-18fix networking on win32 hostJuha Riihimäki
At least under some mingw compilers slirp networking fails without declaring these fields packed. From: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-03Don't leak file descriptorsKevin Wolf
We're leaking file descriptors to child processes. Set FD_CLOEXEC on file descriptors that don't need to be passed to children to stop this misbehaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-11-21slirp: fix use-after-freeMark McLoughlin
460fec67ee introduced a use-after free in slirp. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-09-30slirp: fix unmatched bracket in if 0Michael S. Tsirkin
Fix unmatched bracket in commented out code Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-09-05Fix Sparse warnings: add "static"Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-31Fix compiler warningsStefan Weil
Starting with commit df7a86ed735eafefbd046c8cad7134652fe3f600, mingw32 builds result in a compiler warning for dns_addr: CC slirp/slirp.o /home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: missing braces around initializer /home/stefan/src/qemu/savannah/qemu/slirp/slirp.c:50: warning: (near initialization for ‘dns_addr.S_un’) Removing the assignment fixes the warning without the need of special code for mingw32 (and also saves some bytes in the resulting binary). To fix another potential compiler warning, the missing 'static' attribute was added. The same changes were applied to dns_addr_time. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27slirp: Read host DNS config on demandEd Swierk
Currently the qemu user-mode networking stack reads the host DNS configuration (/etc/resolv.conf or the Windows equivalent) only once when qemu starts. This causes name lookups in the guest to fail if the host is moved to a different network from which the original DNS servers are unreachable, a common occurrence when the host is a laptop. This patch changes the slirp code to read the host DNS configuration on demand, caching the results for at most 1 second to avoid unnecessary overhead if name lookups occur in rapid succession. On non-Windows hosts, /etc/resolv.conf is re-read only if the file has been replaced or if its size or mtime has changed. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27slirp: Remove our_addr codeEd Swierk
Three problems with our_addr: - It's determined only once when qemu starts, but the address can change (just like the DNS configuration can). - It's supposed to be the IP address of a host network interface, but there's no guarantee that gethostbyname(gethostname()) actually does that: the host might be a laptop that has only a loopback interface up, or the hostname might be localhost.localdomain, etc. - It's useless at best: get_dns_addr() calls it, there's no reason to send DNS requests to a different IP address if you're running a DNS server on the host and resolv.conf points to 127.0.0.1. These problems are easily solved by removing the code. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-01Add missing "static"Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-01More NULL pointer fixesBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-07-27rename WORDS_BIGENDIAN to HOST_WORDS_BIGENDIANJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27slirp: Use monotonic clock if available (v2)Ed Swierk
Calling gettimeofday() to compute a time interval can cause problems if the system clock jumps forwards or backwards; replace updtime() with qemu_get_clock(rt_clock), which calls clock_gettime(CLOCK_MONOTONIC) if it is available. Also remove some useless macros. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27slirp: Remove UDP protocol emulation (talk, cuseeme)Ed Swierk
The UDP emulation code for talk has been commented out since the beginning of time, and unless someone who runs CU-SeeMe on qemu with user-mode networking can vouch that the special magic (a) is necessary and (b) works, let's get rid of the code. Signed-off-by: Ed Swierk <eswierk@aristanetworks.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27slirp: Fix guestfwd for incoming dataJan Kiszka
Unless a virtual server address was explicitly defined (which is impossible with the legacy -net channel format), guestfwd did not properly forwarded host->guest packets. This patch fixes it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-01Fix breakage by obsolete _P() for goodBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-29slirp: tftp: Relax filename format checkJan Kiszka
[ Applies on top of my recently posted slirp series. ] Allow tftp requests with filenames that do not start with a slash. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Save/restore bootp client statesJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Enable multiple instancesJan Kiszka
Once again this was a long journey to reach the destination: Allow to instantiate slirp multiple times. But as in the past, the journey was worthwhile, cleaning up, fixing and enhancing various parts of the user space network stack along the way. What is this particular change good for? Multiple slirps instances allow separated user space networks for guests with multiple NICs. This is already possible, but without any slirp support for the second network, ie. without a chance to talk to that network from the host via IP. We have a legacy guest system here that benefits from this slirp enhancement, allowing us to run both of its NICs purely over unprivileged user space IP stacks. Another benefit of this patch is that it simply removes an artificial restriction of the configuration space qemu is providing, avoiding another source of surprises that users may face when playing with possible setups. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Allocate/free stack instance dynamicallyJan Kiszka
Allocate the internal slirp state dynamically and provide and call slirp_cleanup to properly release it after use. This patch finally unbreaks slirp release and re-instantiation via host_net_* monitor commands. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Use internal state in interfaceJan Kiszka
This now also exports the internal state to the slirp users in qemu, returning it from slirp_init and expecting it along with service invocations. Additionally provide an opaque value interface for the callbacks from slirp into the qemu core. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out internal state structureJan Kiszka
The essence of this patch is to stuff (almost) all global variables of the slirp stack into the structure Slirp. In this step, we still keep the structure as global variable, directly accessible by the whole stack. Changes to the external interface of slirp will be applied in the following patches. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop link_up checks from if_output and slirp_socket_can_recvJan Kiszka
link_up is true once slirp is initialized, so these check are really not required. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Clean up timeout handling around slirp_select_fill/pollJan Kiszka
Again lot of dead code. Remove it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Kill slirp_is_initedJan Kiszka
Avoid the need for slirp_is_inited by refactoring the protected slirp_select_* functions. This also avoids the clearing of all fd sets on select errors. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Clean up updtimeJan Kiszka
Drop redundant typecasts in both variants and remove the pointless round-up in the UNIX version. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Make IP packet ID consistentJan Kiszka
Currently, ip_id is always initialized to 0 on slirp startup (despite the broken attempt to derive it from the clock). This is good for reproducibility. But it is not preserved across save/restore. This patch therefore drops the dead initialization code from ip_init and introduces ip_id to the persistent slirp state. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Factor out one-time initializationJan Kiszka
In order to prepare re-initialization and multi-instance slirp, factor out init code that is of global scope and (at least for now) only need to be run once. This also fixes the potentially uninitialized use of our_addr in get_dns_addr. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Rework filename handlingJan Kiszka
This changes the filename handling from a static buffer in tftp_session for the client-provided name + prefix to a dynamically allocated buffer that keeps the combined path in one place. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Refactor tftp_handle_rrqJan Kiszka
Specifically make the filename extraction more readable, and always report errors back to the client. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Clean up tftp_send_errorJan Kiszka
The return code of tftp_send_error is not used, drop it. And also make sure to always terminate the session. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: tftp: Cleanup tftp_prefix checkJan Kiszka
Perform check for set prefix early (if it's not given, tftp is disabled) and drop redundant second check. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop unused icmp_var.hJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Cleanup and basic reanimation of debug codeJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop statistic codeJan Kiszka
As agreed on the mailing list, there is no interest in keeping the usually disabled slirp statistics in the tree. So this patch removes them. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-29slirp: Drop dead codeJan Kiszka
After all its years inside the qemu tree, there is no point in keeping the dead code paths of slirp. This patch is a first round of removing usually commented out code parts. More cleanups need to follow (and maybe finally a proper reindention). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>