aboutsummaryrefslogtreecommitdiff
path: root/slirp/slirp.c
AgeCommit message (Collapse)Author
2017-04-29slirp: VMStatify remaining except for loopDr. David Alan Gilbert
This converts the remaining components, except for the top level loop, to VMState. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMStatify socket levelDr. David Alan Gilbert
Working up the stack, this replaces the slirp_socket_load/save with VMState definitions. A place holder for IPv6 support is added as a comment; it needs testing once the rest of the IPv6 code is there. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMStatify sbufDr. David Alan Gilbert
Convert the sbuf structure to a VMStateDescription. Note this uses the VMSTATE_WITH_TMP mechanism to calculate and reload the offsets based on the pointers. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-29slirp: VMState conversion; tcpcbDr. David Alan Gilbert
Convert the migration of the struct tcpcb to use a VMStateDescription, the rest of it will come later. Mostly mechanical, except for conversion of some 'char' to uint8_t to ensure portability. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2017-04-25slirp: add a fake NC-SI backendCédric Le Goater
NC-SI (Network Controller Sideband Interface) enables a BMC to manage a set of NICs on a system. This model takes the simplest approach and reverses the NC-SI packets to pretend a NIC is present and exercise the Linux driver. The NCSI header file <ncsi-pkt.h> comes from mainline Linux and was untabified. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-03-29slirp: fix compilation errors with DEBUG setLaurent Vivier
slirp/slirp.c: In function 'get_dns_addr_resolv_conf': slirp/slirp.c:202:29: error: initialization discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] char *res = inet_ntop(af, tmp_addr, s, sizeof(s)); ^~~~~~~~~ slirp/slirp.c:204:25: error: assignment discards 'const' qualifier from pointer target type [-Werror=discarded-qualifiers] res = "(string conversion error)"; Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-12-20slirp, disas: Replace min/max with MIN/MAX macrosYuval Shaia
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-09-13hw: replace most use of qemu_chr_fe_write with qemu_chr_fe_write_allDaniel P. Berrange
The qemu_chr_fe_write method will return -1 on EAGAIN if the chardev backend write would block. Almost no callers of the qemu_chr_fe_write() method check the return value, instead blindly assuming data was successfully sent. In most cases this will lead to silent data loss on interactive consoles, but in some cases (eg RNG EGD) it'll just cause corruption of the protocol being spoken. We unfortunately can't fix the virtio-console code, due to a bug in the Linux guest drivers, which would cause the entire Linux kernel to hang if we delay processing of the incoming data in any way. Fixing this requires first fixing the guest driver to not hold spinlocks while writing to the hvc device backend. Fixes bug: https://bugs.launchpad.net/qemu/+bug/1586756 Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <1473170165-540-4-git-send-email-berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-16slirp: Rename "struct arphdr" to "struct slirp_arphdr"Thomas Huth
struct arphdr is already used by the system headers on OpenBSD and thus QEMU does not compile here anymore. Fix it by renaming our struct to slirp_arphdr instead. Reported-by: Brad Smith Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Signed-off-by: Thomas Huth <thuth@redhat.com> Message-id: 1471249494-17392-1-git-send-email-thuth@redhat.com Buglink: https://bugs.launchpad.net/qemu/+bug/1613133 Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-08error: Strip trailing '\n' from error string arguments (again)Markus Armbruster
Commit 9af9e0f, 6daf194d, be62a2eb and 312fd5f got rid of a bunch, but they keep coming back. checkpatch.pl tries to flag them since commit 5d596c2, but it's not very good at it. Offenders tracked down with Coccinelle script scripts/coccinelle/err-bad-newline.cocci, an updated version of the script from commit 312fd5f. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <1470224274-31522-2-git-send-email-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-07-03slirp: Support link-local DNS addressesSamuel Thibault
They look like fe80::%eth0 Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com> --- Changes since last submission: - fix windows build
2016-07-03slirp: Add dns6 resolutionSamuel Thibault
This makes get_dns_addr address family-agnostic, thus allowing to add the IPv6 case. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-07-03slirp: Split get_dns_addrSamuel Thibault
Separate get_dns_addr into get_dns_addr_cached and get_dns_addr_resolv_conf to make conversion to IPv6 easier. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-04-07slirp: avoid use-after-free in slirp_pollfds_poll() if soread() returns an errorSteven Luo
Samuel Thibault pointed out that it's possible that slirp_pollfds_poll() will try to use a socket even after soread() returns an error, resulting in an use-after-free if the socket was removed while handling the error. Avoid this by refusing to continue to work with the socket in this case. Signed-off-by: Steven Luo <steven+qemu@steven676.net> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-04-01slirp: Allow disabling IPv4 or IPv6Samuel Thibault
Add ipv4 and ipv6 boolean options, so the user can setup IPv4-only and IPv6-only network environments. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-04-01slirp: Fix migration from older versions of QEMU to the current oneThomas Huth
While adding the IPv6 support, the commit eae303ff23f51259eddc8856c71453d8 ("slirp: Make Socket structure IPv6 compatible") changed the format of the migration stream, without taking into account that we might still receive an old migration stream layout when upgrading from QEMU version 2.5 (or older) to QEMU 2.6. Currently, QEMU bails out when doing a migration from QEMU 2.5 to the recent master version when it has been started with a "-net user,guestfwd=..." network. So let's fix this by checking the version ID of the migration stream and by using the old behavior if we've detected version 3 or less. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2016-03-22util: move declarations out of qemu-common.hVeronia Bahaa
Move declarations out of qemu-common.h for functions declared in utils/ files: e.g. include/qemu/path.h for utils/path.c. Move inline functions out of qemu-common.h and into new files (e.g. include/qemu/bcd.h) Signed-off-by: Veronia Bahaa <veroniabahaa@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-03-15qapi-schema, qemu-options & slirp: Adding Qemu options for IPv6 addressesYann Bordenave
This patch adds parameters to manage some new options in the qemu -net command. Slirp IPv6 address, network prefix, and DNS IPv6 address can be given in argument to the qemu command. Defaults parameters are respectively fec0::2, fec0::, /64 and fec0::3. Signed-off-by: Yann Bordenave <meow@meowstars.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Adding IPv6 address for DNS relayGuillaume Subiron
This patch adds an IPv6 address to the DNS relay. in6_equal_dns() is developed using this Slirp attribute. sotranslate_in/out/accept() are also updated to manage the IPv6 case so the guest can be able to join the host using one of the Slirp addresses. For now this only points to localhost. Further development will be needed to automatically fetch the IPv6 address from resolv.conf, and announce this via RDNSS. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Generalizing and neutralizing various TCP functions before adding ↵Guillaume Subiron
IPv6 stuff Basically, this patch adds some switch in various TCP functions to prepare them for the IPv6 case. To have something to "switch" in tcp_input() and tcp_respond(), a new argument is used to give them the sa_family of the addresses they are working on. This patch does not include the entailed reindentation, to make proofread easier. Reindentation is adressed in the following no-op patch. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Factorizing tcpiphdr structure with an unionGuillaume Subiron
This patch factorizes the tcpiphdr structure to put the IPv4 fields in an union, for addition of version 6 in further patch. Using some macros, retrocompatibility of the existing code is assured. This patch also fixes the SLIRP_MSIZE and margin computation in various functions, and makes them compatible with the new tcpiphdr structure, whose size will be bigger than sizeof(struct tcphdr) + sizeof(struct ip) Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-03-15slirp: Adding IPv6, ICMPv6 Echo and NDP autoconfigurationGuillaume Subiron
This patch adds the functions needed to handle IPv6 packets. ICMPv6 and NDP headers are implemented. Slirp is now able to send NDP Router or Neighbor Advertisement when it receives Router or Neighbor Solicitation. Using a 64bit-sized IPv6 prefix, the guest is now able to perform stateless autoconfiguration (SLAAC) and to compute its IPv6 address. This patch adds an ndp_table, mainly inspired by arp_table, to keep an NDP cache and manage network address resolution. Slirp regularly sends NDP Neighbor Advertisement, as recommended by the RFC, to make the guest refresh its route. This also adds ip6_cksum() to compute ICMPv6 checksums using IPv6 pseudo-header. Some #define ETH_* are moved upper in slirp.h to make them accessible to other slirp/*.h Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-02-04slirp: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1454089805-5470-10-git-send-email-peter.maydell@linaro.org
2016-02-04slirp: Make Socket structure IPv6 compatibleGuillaume Subiron
This patch replaces foreign and local address/port couples in Socket structure by 2 sockaddr_storage which can be casted in sockaddr_in. Direct access to address and port is still possible thanks to some \#define, so retrocompatibility of the existing code is assured. The ss_family field of sockaddr_storage is declared after each socket creation. The whole structure is also saved/restored when a Qemu session is saved/restored. This prepares for IPv6 support. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-02-04slirp: Adding address family switch for produced framesGuillaume Subiron
In if_encap, a switch is added to prepare for the IPv6 case. Some code is factorized. This prepares for IPv6 support. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com>
2016-02-04slirp: Generalizing and neutralizing ARP codeGuillaume Subiron
Basically, this patch replaces "arp" by "resolution" every time "arp" means "mac resolution" and not specifically ARP. This prepares for IPv6 support. Signed-off-by: Guillaume Subiron <maethor@subiron.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2014-06-10slirp: Remove unused zero_ethaddr[] variablePeter Maydell
The zero_ethaddr[] array is never used; delete it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-06-09slirp/arp: do not special-case bogus IP addressesSamuel Thibault
Do not special-case addresses with zero host part, as we do not necessarily know how big it is, and the guest can fake them anyway. Silently avoid having 0.0.0.0 as a destination, however. Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> [Edgar: Minor change to subject] Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-04-25slirp: Remove default_mon usageCole Robinson
These errors don't seem user initiated, so forcibly printing to the monitor doesn't seem right. Just use error_report. Drop lprint since it's now unused. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2013-09-17slirp: clean up slirp_update_timeoutJan Kiszka
No need to write out the timeout early, keep it local until we are done. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17slirp: set mainloop timeout with more precise valueLiu Ping Fan
If slirp needs to emulate tcp timeout, then the timeout value for mainloop should be more precise, which is determined by slirp's fasttimo or slowtimo. Achieve this by swap the logic sequence of slirp_pollfds_fill and slirp_update_timeout. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17slirp: define timeout as macroLiu Ping Fan
Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-09-17slirp: make timeout localLiu Ping Fan
Each slirp has its own time to caculate timeout. Signed-off-by: Liu Ping Fan <pingfank@linux.vnet.ibm.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-04-15sysemu: avoid proliferation of include/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-02-21slirp: switch to GPollFDStefan Hajnoczi
Slirp uses rfds/wfds/xfds more extensively than other QEMU components. The rarely-used out-of-band TCP data feature is used. That means we need the full table of select(2) to g_poll(3) events: rfds -> G_IO_IN | G_IO_HUP | G_IO_ERR wfds -> G_IO_OUT | G_IO_ERR xfds -> G_IO_PRI I came up with this table by looking at Linux fs/select.c which maps select(2) to poll(2) internally. Another detail to watch out for are the global variables that reference rfds/wfds/xfds during slirp_select_poll(). sofcantrcvmore() and sofcantsendmore() use these globals to clear fd_set bits. When sofcantrcvmore() is called, the wfds bit is cleared so that the write handler will no longer be run for this iteration of the event loop. This actually seems buggy to me since TCP connections can be half-closed and we'd still want to handle data in half-duplex fashion. I think the real intention is to avoid running the read/write handler when the socket has been fully closed. This is indicated with the SS_NOFDREF state bit so we now check for it before invoking the TCP write handler. Note that UDP/ICMP code paths don't care because they are connectionless. Note that slirp/ has a lot of tabs and sometimes mixed tabs with spaces. I followed the style of the surrounding code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-6-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-02-21slirp: slirp/slirp.c coding style cleanupStefan Hajnoczi
The slirp glue code uses tabs in some places. Since the next patch will modify the file, convert tabs to spaces and fix checkpatch.pl issues. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1361356113-11049-5-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-30g_strdup(NULL) returns NULL; simplifyMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2012-12-19softmmu: move remaining include files to include/ subdirectoriesPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-12-19misc: move include files to include/qemu/Paolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2012-11-15slirp: Add domain-search option to slirp's DHCP serverKlaus Stengel
This patch will allow the user to include the domain-search option in replies from the built-in DHCP server. The domain suffixes can be specified by adding dnssearch= entries to the "-net user" parameter. [Jan: tiny style adjustments] Signed-off-by: Klaus Stengel <Klaus.Stengel@asamnet.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-08-06slirp: fix build on mingw32Anthony Liguori
in_addr_t isn't available on mingw32. Just use an unsigned long instead. I considered typedef'ing in_addr_t on mingw32 but this would potentially be brittle if mingw32 did introduce the type. Cc: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-08-03slirp: Handle whole 127.0.0.0/8 network as local addresses.Anders Waldenborg
Changes so translation of remote address to the host's ip address in the virtual network happens for all addresses in the 127.0.0.0/8 network, not just 127.0.0.1. This fixes so that hostfwd bound to addresses such as 127.0.0.2 works. Signed-off-by: Anders Waldenborg <anders@0x63.nu> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-04-26main_loop_wait: block indefinitelyStefano Stabellini
- remove qemu_calculate_timeout; - explicitly size timeout to uint32_t; - introduce slirp_update_timeout; - pass NULL as timeout argument to select in case timeout is the maximum value; Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Paul Brook <paul@codesourcery.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-13slirp: Cleanup resources on instance removalJan Kiszka
Close & free sockets when shutting down a slirp instance, also release all buffers. CC: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-03-13slirp: Remove unneeded if_queuedJan Kiszka
There is now a trivial check on entry of if_start for pending packets, so we can drop the additional tracking via if_queued. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-22char: rename qemu_chr_write() -> qemu_chr_fe_write()Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-20Use glib memory allocation and free functionsAnthony Liguori
qemu_malloc/qemu_free no longer exist after this commit. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-08-05slirp: Only start packet expiration for delayed onesJan Kiszka
The expiration timeout must only affect packets that are queued due to pending ARP resolutions. The old version broke ping e.g. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2011-08-03Delayed IP packetsFabien Chouteau
In the current implementation, if Slirp tries to send an IP packet to a client with an unknown hardware address, the packet is simply dropped and an ARP request is sent (if_encap in slirp/slirp.c). With this patch, Slirp will send the ARP request, re-queue the packet and try to send it later. The packet is dropped after one second if the ARP reply is not received. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 15:29:08 +0000