| Age | Commit message (Collapse) | Author |
|---|
|
Add an option to check if upload is permitted without actually
attempting a build. This can be useful to add a third outcome
beyond success and failure---namely, a CI job can self-cancel
if the uploading quota has been reached.
There is a small change here in that a failure to do the upload
check changes the exit code from 1 to 99. 99 was chosen because
it is what Autotools and Meson use to represent a problem in the
setup (as opposed to a failure in the test).
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-14-armbru@redhat.com>
|
|
We use section "Returns" for documenting both success and error
response of commands.
I intend to generate better command success response documentation.
Easier when "Returns" documents just he success response.
Create new section tag "Errors". The next two commits will move error
response documentation from "Returns" sections to "Errors" sections.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-4-armbru@redhat.com>
|
|
Change "'Returns:' is only valid for commands" to "'Returns' section
is only valid for commands".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-3-armbru@redhat.com>
|
|
This is chiefly to make code that looks up these sections easier to
read.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240227113921.236097-2-armbru@redhat.com>
|
|
These members will be used to help plugins to identify registers.
The added members in instances of GDBFeature dynamically generated by
CPUs will be filled in later changes.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Message-Id: <20231213-gdb-v17-10-777047380591@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240227144335.1196131-15-alex.bennee@linaro.org>
|
|
QAPIDoc stores a reference to QAPIParser just to pass it to
QAPIParseError. The resulting error position depends on the state of
the parser. It happens to be the current comment line. Servicable,
but action at a distance.
The commit before previous moved most uses of QAPIParseError from
QAPIDoc to QAPIParser. There are just three left. Convert them to
QAPISemError. This involves passing info to a few methods. Then drop
the reference to QAPIParser.
The three errors lose the column number. Not really interesting here:
it's the comment line's indentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-17-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The parser recognizes only the first "Features:" line. Any subsequent
ones are treated as ordinary text, as visible in test case
doc-duplicate-features. Recognize "Features:" lines anywhere. A
second one is an error.
A 'Features:' line without any features is useless, but not an error.
Make it an error. This makes detecting a second "Features:" line
easier.
qapi/run-state.json actually has an instance of this since commit
fe17522d854 (qapi: Remove deprecated 'singlestep' member of
StatusInfo). Clean it up.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-16-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
QAPISchemaParser is a conventional recursive descent parser. Except
QAPISchemaParser.get_doc() delegates most of the doc comment parsing
work to a state machine in QAPIDoc. The state machine doesn't get
tokens like a recursive descent parser, it is fed tokens.
I find this state machine rather opaque and hard to maintain.
Replace it by a conventional parser, all in QAPISchemaParser. Less
code, and (at least in my opinion) easier to understand.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-15-armbru@redhat.com>
Tested-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The parser mostly doesn't create adjacent untagged sections, and
merging the ones it does create is hardly worth the bother. I'm doing
it to avoid behavioral change in the next commit.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-14-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
We currently call QAPIDoc.check() only for definition documentation.
Calling it for free-form documentation as well is simpler. No change,
because it doesn't actually do anything there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-13-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Putting a blank line before section tags and 'Features:' is good,
existing practice. Enforce it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-12-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
By convention, we indent the second and subsequent lines of
descriptions and tagged sections, except for examples.
Turn this into a hard rule, and apply it to examples, too.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-11-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
[Straightforward conflicts in qapi/migration.json resolved]
|
|
docs/devel/qapi-code-gen.txt claims "A heading line must be the first
line of the documentation comment block" since commit
55ec69f8b16 (docs/devel/qapi-code-gen.txt: Update to new rST backend
conventions). Not true, we have code to make it work anywhere in a
free-form doc comment: commit dcdc07a97cb (qapi: Make section headings
start a new doc comment block).
Make it true, for simplicity's sake.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-10-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Since the previous commit, QAPIDoc.Section.name is either
None (untagged section) or the section's tag string ('Returns',
'@name', ...). Rename it to .tag.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-9-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Improve the message for an empty tagged section from
empty doc section 'Note'
to
text required after 'Note:'
and the message for an empty argument or feature description from
empty doc section 'foo'
to
text required after '@foo:'
Improve the error position to refer to the beginning of the empty
section instead of its end.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-8-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
When something other than a command has a "Returns" section, the error
message points to the beginning of the definition comment. Point to
the "Returns" section instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
When documented arguments don't exist, the error message points to the
beginning of the definition comment. Point to the first bogus
argument description instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240216145841.2099240-6-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Correct typos automatically found with the `typos` tool
<https://crates.io/crates/typos>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
QAPI patches patches for 2024-02-12
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmXJ4PsSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTDwsP/iEdmZmjoxMedTzec+GGl5QxfMkqLn14
# eX2jXtzLGZMjGMh4lvMaAdn0AJ3VnBOqxly14sMK6TMWGZkNKJpKF+2Cj8IKte1o
# MlpS1N/7rZxew+B9HkulhS+6UFB3Jndsflm2ot4g+rRjohJCw0v0GapEqjQg6CKp
# efJhiPuBSImm2MSx+n4dj8gkcFOMrgo6oc2ZpN0ypvGb4mupPpnNj6v12yZL8FUM
# Enwsk+pBLQWoYxI9MFDGc0gW9ZBlEdP/nVq/PbglD06Urc241AHGYqT7XLT0oHLl
# 6NA4v3N4GPdSe6oJdOHDFVR+/uPKiiyrseTdYTSGgAN8gcRtHam4WWhqSDIN3Afl
# y41A9ZKkW51TpdszQ6wCdrgbTH5z6K5vnwWfVTwIgdI0mrDcAGWnc2Yr7m6c3fS8
# /Vz00J7OC0P1nXh0IeRxXExXSmaGUUgS3T/KBXPYr0PQPe7Qd+1eTQN6LaliEMRH
# dRpXQabjLmztMhc5VXCv8ihwa7mNVaEn++uRrdKoWOvIQEp0ZeZfxCzp+/2mGPJ0
# YKJc7Ja260h2Y00/Zu2XiwjdzgG+h+QuJO/3OFsZIV5ftFqSBRMCHiGEfANHidld
# Cpo0efeWWTPdV8BQOirGGr0qtDTmgFMFCZTJMsI/g0m9sMCv0WbTtmWNThwaI3uD
# MKnEGG+KX7vD
# =nhrQ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 12 Feb 2024 09:12:27 GMT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2024-02-12' of https://repo.or.cz/qemu/armbru:
MAINTAINERS: Cover qapi/stats.json
MAINTAINERS: Cover qapi/cxl.json
qapi/migration: Add missing tls-authz documentation
qapi: Add missing union tag documentation
qapi: Move @String out of common.json to discourage reuse
qapi: Improve documentation of file descriptor socket addresses
qapi: Plug trivial documentation holes around former simple unions
qapi/dump: Clean up documentation of DumpGuestMemoryCapability
qapi/yank: Clean up documentaion of yank
qga/qapi-schema: Plug trivial documentation holes
qga/qapi-schema: Clean up documentation of guest-set-vcpus
qga/qapi-schema: Clean up documentation of guest-set-memory-blocks
qapi: Require member documentation (with loophole)
sphinx/qapidoc: Drop code to generate doc for simple union tag
qapi: Indent tagged doc comment sections properly
qapi/block-core: Fix BlockLatencyHistogramInfo doc markup
docs/devel/qapi-code-gen: Tweak doc comment whitespace
docs/devel/qapi-code-gen: Normalize version refs x.y.0 to just x.y
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The QAPI generator forces you to document your stuff. Except for
command arguments, event data, and members of enum and object types:
these the generator silently "documents" as "Not documented".
We can't require proper documentation there without first fixing all
the offenders. We've always had too many offenders to pull that off.
Right now, we have more than 500. Worse, we seem to fix old ones no
faster than we add new ones: in the past year, we fixed 22 ones, but
added 26 new ones.
To help arrest the backsliding, make missing documentation an error
unless the command, type, or event is in listed in new pragma
documentation-exceptions.
List all the current offenders: 117 commands and types in qapi/, and 9
in qga/.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240205074709.3613229-7-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
The RST doc include can't be made to skip the comment indicating the CPU
CSV file is auto-generated when importing it. This comment line was
previously manually removed from the generated output that was committed.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
Update the exclude list to exclude some more files which don't follow our
standard #include policy.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
RAM_SAVE_FLAG_MEM_SIZE contains the total length of ramblock idstr to know
whether scanning of ramblocks is complete. Drop the trick.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20240117075848.139045-4-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Conversion of docs/devel/qapi-code-gen.txt to ReST left several
dangling references behind. Fix them to point to
docs/devel/qapi-code-gen.rst.
Fixes: f7aa076dbdfc (docs: convert qapi-code-gen.txt to ReST)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
into staging
testing and misc updates
- add LE microblaze test to avocado
- use modern snapshot=on to avoid trashing disk image
- use plain bool for fe_is_open
- various updates to qtest timeouts
- enable meson test timeouts
- tweak the readthedocs environment
- partially revert un-flaking x86_64
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmWhPccACgkQ+9DbCVqe
# KkS5agf+OoW6HOitt34YeL6cGGtIKaxbta+Fs6jq+ucIbN63TmLTuKrmPiRNxjuo
# Fj2Qvh9R7Tl7Q/a7ZAym0Fze7GtsvvsidkiQS4pmi9vYuJrhS734CxXHT8JS6zJr
# ymQ0nGZODg1cVB4oAR9sXo/OwEQdDTSgKp8wdNr930fxYwokUKBUgcOqElu3SWHv
# duSYDuaflnP5B8ZGbb1ZnOlwS9lZIHTwjZyN5J1YtxF0T8Ez4A+xseEOpQ/00MoE
# Ecjdp3ELCxzOI+1U33Yni7ol//fxQpRKi+xf2fGIxhuSA3i32rmY5NWTvl7VwuS1
# gXryjX2rukSujySP3vkdtTp0dmkbpg==
# =ZuDd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 12 Jan 2024 13:25:27 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-testing-updates-120124-2' of https://gitlab.com/stsquad/qemu: (22 commits)
tests/avocado: partially revert unmasking of replay_linux tests
readthodocs: fully specify a build environment
mtest2make: stop disabling meson test timeouts
tests/fp: Bump fp-test-mulAdd test timeout to 3 minutes
tests/unit: Bump test-crypto-block test timeout to 5 minutes
tests/unit: Bump test-aio-multithread test timeout to 2 minutes
tests/qtest: Bump the device-introspect-test timeout to 12 minutes
qtest: bump bios-table-test timeout to 9 minutes
qtest: bump aspeed_smc-test timeout to 6 minutes
qtest: bump qos-test timeout to 2 minutes
qtest: bump boot-serial-test timeout to 3 minutes
qtest: bump prom-env-test timeout to 6 minutes
qtest: bump pxe-test timeout to 10 minutes
qtest: bump test-hmp timeout to 4 minutes
qtest: bump npcm7xx_pwm-test timeout to 5 minutes
qtest: bump qom-test timeout to 15 minutes
qtest: bump migration-test timeout to 8 minutes
qtest: bump min meson timeout to 60 seconds
chardev: use bool for fe_is_open
gitlab: include microblazeel in testing
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The mtest2make.py script passes the arg '-t 0' to 'meson test' which
disables all test timeouts. This is a major source of pain when running
in GitLab CI and a test gets stuck. It will stall until GitLab kills the
CI job. This leaves us with little easily consumable information about
the stalled test. The TAP format doesn't show the test name until it is
completed, and TAP output from multiple tests it interleaved. So we
have to analyse the log to figure out what tests had un-finished TAP
output present and thus infer which test case caused the hang. This is
very time consuming and error prone.
By allowing meson to kill stalled tests, we get a direct display of what
test program got stuck, which lets us more directly focus in on what
specific test case within the test program hung.
The other issue with disabling meson test timeouts by default is that it
makes it more likely that maintainers inadvertantly introduce slowdowns.
For example the recent-ish change that accidentally made migrate-test
take 15-20 minutes instead of around 1 minute.
The main risk of this change is that the individual test timeouts might
be too short to allow completion in high load scenarios. Thus, there is
likely to be some short term pain where we have to bump the timeouts for
certain tests to make them reliable enough. The preceeding few patches
raised the timeouts for all failures that were immediately apparent
in GitLab CI.
Even with the possible short term instability, this should still be a
net win for debuggability of failed CI pipelines over the long term.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230717182859.707658-13-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20231215070357.10888-17-thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Add two spelling check options (--codespell and --codespellfile) to
enhance spelling check through dictionary, which copied the Linux
kernel's implementation in checkpatch.pl.
This check uses the dictionary at "/usr/share/codespell/dictionary.txt"
by default, if there is no dictionary specified under this path, it
will look for the dictionary of python3's codespell (This requires user
to add python3's path in environment variable $PATH, and to install
codespell by "pip install codespell").
Tested-by: Yongwei Ma <yongwei.ma@intel.com>
Tested-by: Samuel Tardieu <sam@rfc1149.net>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Message-ID: <20240105083848.267192-1-zhao1.liu@linux.intel.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
KVM vector support for RISC-V requires the linux-header ptrace.h.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20231218204321.75757-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
This will help in tracking where we are in the stream when debugging.
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-6-alex.bennee@linaro.org>
|
|
To help debugging replay logs I've implemented decode_plain and
decode_char_write as well as put in a new table for the current format
of log.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231211091346.14616-5-alex.bennee@linaro.org>
|
|
Use qemu_get_current_aio_context() in mixed wrappers and coroutine
wrappers so that code runs in the caller's AioContext instead of moving
to the BlockDriverState's AioContext. This change is necessary for the
multi-queue block layer where any thread can call into the block layer.
Most wrappers are IO_CODE where it's safe to use the current AioContext
nowadays. BlockDrivers and the core block layer use their own locks and
no longer depend on the AioContext lock for thread-safety.
The bdrv_create() wrapper invokes GLOBAL_STATE code. Using the current
AioContext is safe because this code is only called with the BQL held
from the main loop thread.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230912231037.826804-6-stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This is the big patch that removes
aio_context_acquire()/aio_context_release() from the block layer and
affected block layer users.
There isn't a clean way to split this patch and the reviewers are likely
the same group of people, so I decided to do it in one patch.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-ID: <20231205182011.1976568-7-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Stop acquiring/releasing the AioContext lock in
bdrv_graph_wrlock()/bdrv_graph_unlock() since the lock no longer has any
effect.
The distinction between bdrv_graph_wrunlock() and
bdrv_graph_wrunlock_ctx() becomes meaningless and they can be collapsed
into one function.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231205182011.1976568-6-stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
The migration stream on s390x contains data for the storage_attributes
which the analyze-migration.py cannot handle yet. Add the basic code
for handling this, so we can re-enable the check in the migration-test.
Message-ID: <20231120113951.162090-1-thuth@redhat.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The URL to the Coverity tools download has changed; the old one points
to an obsolete version that is not supported anymore. Adjust to point
to the correct and supported tools.
Suggested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Unfortunately Coverity doesn't follow the logic aroung "len" and "l"
variables in stacks finishing with flatview_{read,write}_continue() and
generate a lot of OVERRUN false-positives. When small buffer (2 or 4
bytes) is passed to mem read/write path, Coverity assumes the worst
case of sz=8 in stn_he_p()/ldn_he_p() (defined in
include/qemu/bswap.h), and reports buffer overrun.
To silence these false-positives we have model functions, which hide
real logic from Coverity.
However, it turned out that these new two assertions are enough to
quiet Coverity.
Assertions are better than hiding the logic, so let's drop the
modelling and move to assertions for memory r/w call stacks.
After patch, the sequence
cov-make-library --output-file /tmp/master.xmldb \
scripts/coverity-scan/model.c
cov-build --dir ~/covtmp/master make -j9
cov-analyze --user-model-file /tmp/master.xmldb \
--dir ~/covtmp/master --all --strip-path "$(pwd)
cov-format-errors --dir ~/covtmp/master \
--html-output ~/covtmp/master_html_report
Generate for me the same big set of CIDs excepept for 6 disappeared (so
it becomes even better).
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: David Hildenbrand <david@redhat.com>
Message-ID: <20231005140326.332830-1-vsementsov@yandex-team.ru>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
bdrv_graph_wrunlock() calls aio_poll(), which may run callbacks that
have a nested event loop. Nested event loops can depend on other
iothreads making progress, so in order to allow them to make progress it
must not hold the AioContext lock of another thread while calling
aio_poll().
This introduces a @bs parameter to bdrv_graph_wrunlock() whose
AioContext is temporarily dropped (which matches bdrv_graph_wrlock()),
and a bdrv_graph_wrunlock_ctx() that can be used if the BlockDriverState
doesn't necessarily exist any more when unlocking.
This also requires a change to bdrv_schedule_unref(), which was relying
on the incorrectly taken lock. It needs to take the lock itself now.
While this is a separate bug, it can't be fixed a separate patch because
otherwise the intermediate state would either deadlock or try to release
a lock that we don't even hold.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20231115172012.112727-3-kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
[kwolf: Fixed up bdrv_schedule_unref()]
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
I messed it up on merge. It's a debugging aid, so no impact on build.
Fixes: e307a8174bb8 (qapi: provide a friendly string representation of QAPI classes)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20231024104841.1569250-1-armbru@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
|
|
staging
Pull request
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEhpWov9P5fNqsNXdanKSrs4Grc8gFAmVMhGAACgkQnKSrs4Gr
# c8iBoQgAgWjGzp++3Iik0kdMObRlXVpTWwrlYohPg+5NanQB1LifYMt/2MTB70OA
# TUcMcZwzHCUSrtqp+IwU9m5YBZlk+NTQIUn3j5r6Rdv3TnHElBJgpiNWRqpQoDo6
# ZPqSymoyOh2pWtyKQtPQWhx1SsUeF5dEsbOy7fqZi7wLEUqBM1+9LV9C/Y6pIAa7
# KRSnbyNPviyV5B4qX1gaH17DKhj6QyRF/secv8TkKFlfr/6GelNySxEj9+9Om7qO
# R1NT09ZjjMXnNqA9cRzz00fP7bTP36WF065jkYc1oGAo9VwhWAfysju1qbSN2whe
# 4CwucP9lSPuJ+g5tv+7nfX+JfY8+Gw==
# =jAvl
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Nov 2023 15:04:00 HKT
# gpg: using RSA key 8695A8BFD3F97CDAAC35775A9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [ultimate]
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [ultimate]
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* tag 'tracing-pull-request' of https://gitlab.com/stefanha/qemu:
tracetool: avoid invalid escape in Python string
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
This is an error in Python 3.12; fix it by using a raw string literal.
Cc: <qemu-stable@nongnu.org>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20231108105649.60453-1-marcandre.lureau@redhat.com>
|
|
Currently the number of registers exposed to GDB is written as magic
numbers in code. Derive the number of registers GDB actually see from
XML files to replace the magic numbers in code later.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231025093128.33116-2-akihiko.odaki@daynix.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20231106185112.2755262-9-alex.bennee@linaro.org>
|
|
When run this script, there's the error:
python3 scripts/cpu-x86-uarch-abi.py /tmp/qmp
Traceback (most recent call last):
File "/path-to-qemu/qemu/scripts/cpu-x86-uarch-abi.py", line 96, in <module>
cpu = shell.cmd("query-cpu-model-expansion",
TypeError: QEMUMonitorProtocol.cmd() takes 2 positional arguments but 3 were given
Commit 7f521b023bc28 ("scripts/cpu-x86-uarch-abi.py: use .command()
instead of .cmd()") converts the the original .cmd() to .command()
(which was later renamed to "cmd" to replace the original one).
But the new .cmd() only accepts typing.Mapping as the parameter instead
of typing.Dict (see _qmp.execute()).
Change the paremeters of "query-cpu-model-expansion" to typing.Mapping
format to fix this error.
Fixes: 7f521b023bc28 ("scripts/cpu-x86-uarch-abi.py: use .command() instead of .cmd()")
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
|
|
For now, pixman is mandatory, but we set config_host.h and Kconfig.
Once compilation is fixed, "pixman" will become actually optional.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
|
|
This driver is like virtio-balloon on steroids: it allows both changing the
guest memory allocation via ballooning and (in the next patch) inserting
pieces of extra RAM into it on demand from a provided memory backend.
The actual resizing is done via ballooning interface (for example, via
the "balloon" HMP command).
This includes resizing the guest past its boot size - that is, hot-adding
additional memory in granularity limited only by the guest alignment
requirements, as provided by the next patch.
In contrast with ACPI DIMM hotplug where one can only request to unplug a
whole DIMM stick this driver allows removing memory from guest in single
page (4k) units via ballooning.
After a VM reboot the guest is back to its original (boot) size.
In the future, the guest boot memory size might be changed on reboot
instead, taking into account the effective size that VM had before that
reboot (much like Hyper-V does).
For performance reasons, the guest-released memory is tracked in a few
range trees, as a series of (start, count) ranges.
Each time a new page range is inserted into such tree its neighbors are
checked as candidates for possible merging with it.
Besides performance reasons, the Dynamic Memory protocol itself uses page
ranges as the data structure in its messages, so relevant pages need to be
merged into such ranges anyway.
One has to be careful when tracking the guest-released pages, since the
guest can maliciously report returning pages outside its current address
space, which later clash with the address range of newly added memory.
Similarly, the guest can report freeing the same page twice.
The above design results in much better ballooning performance than when
using virtio-balloon with the same guest: 230 GB / minute with this driver
versus 70 GB / minute with virtio-balloon.
During a ballooning operation most of time is spent waiting for the guest
to come up with newly freed page ranges, processing the received ranges on
the host side (in QEMU and KVM) is nearly instantaneous.
The unballoon operation is also pretty much instantaneous:
thanks to the merging of the ballooned out page ranges 200 GB of memory can
be returned to the guest in about 1 second.
With virtio-balloon this operation takes about 2.5 minutes.
These tests were done against a Windows Server 2019 guest running on a
Xeon E5-2699, after dirtying the whole memory inside guest before each
balloon operation.
Using a range tree instead of a bitmap to track the removed memory also
means that the solution scales well with the guest size: even a 1 TB range
takes just a few bytes of such metadata.
Since the required GTree operations aren't present in every Glib version
a check for them was added to the meson build script, together with new
"--enable-hv-balloon" and "--disable-hv-balloon" configure arguments.
If these GTree operations are missing in the system's Glib version this
driver will be skipped during QEMU build.
An optional "status-report=on" device parameter requests memory status
events from the guest (typically sent every second), which allow the host
to learn both the guest memory available and the guest memory in use
counts.
Following commits will add support for their external emission as
"HV_BALLOON_STATUS_REPORT" QMP events.
The driver is named hv-balloon since the Linux kernel client driver for
the Dynamic Memory Protocol is named as such and to follow the naming
pattern established by the virtio-balloon driver.
The whole protocol runs over Hyper-V VMBus.
The driver was tested against Windows Server 2012 R2, Windows Server 2016
and Windows Server 2019 guests and obeys the guest alignment requirements
reported to the host via DM_CAPABILITIES_REPORT message.
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
|
|
If printing a QAPI schema object for debugging we get the classname and
a hex value for the instance:
<qapi.schema.QAPISchemaEnumType object at 0x7f0ab4c2dad0>
<qapi.schema.QAPISchemaObjectType object at 0x7f0ab4c2dd90>
<qapi.schema.QAPISchemaArrayType object at 0x7f0ab4c2df90>
With this change we instead get the classname and the human friendly
name of the QAPI type instance:
<QAPISchemaEnumType:CpuS390State at 0x7f0ab4c2dad0>
<QAPISchemaObjectType:CpuInfoS390 at 0x7f0ab4c2dd90>
<QAPISchemaArrayType:CpuInfoFastList at 0x7f0ab4c2df90>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20231018120500.2028642-1-berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Conditional swapped to avoid negation]
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[Tweaked to mollify pylint]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Some very minor housekeeping to make the linters happy once more.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20231004230532.3002201-4-jsnow@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
vfio queue:
* Support for VFIODisplay migration with ramfb
* Preliminary work for IOMMUFD support
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmUvlEYACgkQUaNDx8/7
# 7KFlaw//X2053de2eTdo38/UMSzi5ACWWn2j1iGQZf/3+J2LcdlixZarZr/2DN56
# 4axmwF6+GKozt5+EnvWtgodDn6U9iyMNaAB3CGBHFHsH8uqKeZd/Ii754q4Rcmy9
# ZufBOPWm9Ff7s2MMFiAZvso75jP2wuwVEe1YPRjeJnsNSNIJ6WZfemh3Sl96yRBb
# r38uqzqetKwl7HziMMWP3yb8v+dU8A9bqI1hf1FZGttfFz3XA+pmjXKA6XxdfiZF
# AAotu5x9w86a08sAlr/qVsZFLR37oQykkXM0D840DafJDyr5fbJiq8cwfOjMw9+D
# w6+udRm5KoBWPsvb/T3dR88GRMO22PChjH9Vjl51TstMNhdTxuKJTKhhSoUFZbXV
# 8CMjwfALk5ggIOyCk1LRd04ed+9qkqgcbw1Guy5pYnyPnY/X6XurxxaxS6Gemgtn
# UvgRYhSjio+LgHLO77IVkWJMooTEPzUTty2Zxa7ldbbE+utPUtsmac9+1m2pnpqk
# 5VQmB074QnsJuvf+7HPU6vYCzQWoXHsH1UY/A0fF7MPedNUAbVYzKrdGPyqEMqHy
# xbilAIaS3oO0pMT6kUpRv5c5vjbwkx94Nf/ii8fQVjWzPfCcaF3yEfaam62jMUku
# stySaRpavKIx2oYLlucBqeKaBGaUofk13gGTQlsFs8pKCOAV7r4=
# =s0fN
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:16:06 EDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@redhat.com>" [unknown]
# gpg: aka "Cédric Le Goater <clg@kaod.org>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20231018' of https://github.com/legoater/qemu: (22 commits)
hw/vfio: add ramfb migration support
ramfb-standalone: add migration support
ramfb: add migration support
vfio/pci: Remove vfio_detach_device from vfio_realize error path
vfio/ccw: Remove redundant definition of TYPE_VFIO_CCW
vfio/ap: Remove pointless apdev variable
vfio/pci: Fix a potential memory leak in vfio_listener_region_add
vfio/common: Move legacy VFIO backend code into separate container.c
vfio/common: Introduce a global VFIODevice list
vfio/common: Store the parent container in VFIODevice
vfio/common: Introduce a per container device list
vfio/common: Move VFIO reset handler registration to a group agnostic function
vfio/ccw: Use vfio_[attach/detach]_device
vfio/ap: Use vfio_[attach/detach]_device
vfio/platform: Use vfio_[attach/detach]_device
vfio/pci: Introduce vfio_[attach/detach]_device
vfio/common: Extract out vfio_kvm_device_[add/del]_fd
vfio/common: Introduce vfio_container_add|del_section_window()
vfio/common: Propagate KVM_SET_DEVICE_ATTR error if any
vfio/common: Move IOMMU agnostic helpers to a separate file
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
* build system and Python cleanups
* fix netbsd VM build
* allow non-relocatable installs
* allow using command line options to configure qemu-ga
* target/i386: check intercept for XSETBV
* target/i386: fix CPUID_HT exposure
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmUvkQQUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroM3pQgArXCsmnsjlng1chjCvKnIuVmaTYZ5
# aC9pcx7TlyM0+XWtTN0NQhFt71Te+3ioReXIQRvy5O68RNbEkiu8LXfOJhWAHbWk
# vZVtzHQuOZVizeZtUruKlDaw0nZ8bg+NI4aGLs6rs3WphEAM+tiLnZJ0BouiedKS
# e/COB/Hqjok+Ntksbfv5q7XpWjwQB0y2073vM1Mcf0ToOWFLFdL7x0SZ3hxyYlYl
# eoefp/8kbWeUWA7HuoOKmpiLIxmKnY7eXp+UCvdnEhnSce9sCxpn2nzqqLuPItTK
# V3GrJ2//+lrekPHyQvb8IjUMUrPOmzf8GadIE0tkfdHjEP72IsHk0VX81A==
# =rPte
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 18 Oct 2023 04:02:12 EDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (32 commits)
configure: define "pkg-config" in addition to "pkgconfig"
meson: add a note on why we use config_host for program paths
meson-buildoptions: document the data at the top
configure, meson: use command line options to configure qemu-ga
configure: unify handling of several Debian cross containers
configure: move environment-specific defaults to config-meson.cross
configure: move target-specific defaults to an external machine file
configure: remove some dead cruft
configure: clean up PIE option handling
configure: clean up plugin option handling
configure, tests/tcg: simplify GDB conditionals
tests/tcg/arm: move non-SVE tests out of conditional
hw/remote: move stub vfu_object_set_bus_irq out of stubs/
hw/xen: cleanup sourcesets
configure: clean up handling of CFI option
meson, cutils: allow non-relocatable installs
meson: do not use set10
meson: do not build shaders by default
tracetool: avoid invalid escape in Python string
tests/vm: avoid invalid escape in Python string
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Update the script to import iommufd.h
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
|
