aboutsummaryrefslogtreecommitdiff
path: root/scripts/decodetree.py
AgeCommit message (Collapse)Author
2020-09-14decodetree: Improve identifier matchingRichard Henderson
Only argument set members have to be C identifiers, everything else gets prefixed during conversion to C. Some places just checked the leading character, and some places matched a leading character plus a C identifier. Convert everything to match full identifiers, including the [&%@&] prefix, and drop the full C identifier requirement. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20200903192334.1603773-1-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-08-21meson: targetPaolo Bonzini
Similar to hw_arch, each architecture defines two sourceset which are placed in dictionaries target_arch and target_softmmu_arch. These are then picked up from there when building the per-emulator static_library. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-13Remove the CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE switchThomas Huth
GCC supports "#pragma GCC diagnostic" since version 4.6, and Clang seems to support it, too, since its early versions 3.x. That means that our minimum required compiler versions all support this pragma already and we can remove the test from configure and all the related #ifdefs in the code. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20200710045515.25986-1-thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2020-06-09decodetree: Drop check for less than 2 patterns in a groupRichard Henderson
While it makes little sense for the end product to have a group containing only a single pattern, avoiding this case within an incremental patch set is troublesome. Because this is expected to be a transient condition, do not bother "optimizing" this case, e.g. by folding away the group. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-08decodetree: Implement non-overlapping groupsRichard Henderson
Intended to be nested within overlapping groups. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-08decodetree: Move semantic propagation into classesRichard Henderson
Create ExcMultiPattern to hold an set of non-overlapping patterns. The body of build_tree, prop_format become member functions on this class. Add minimal member functions to Pattern and MultiPattern to allow recusion through the tree. Move the bulk of build_incmulti_pattern to prop_masks and prop_width in MultiPattern, since we will need this for both kinds of containers. Only perform prop_width for variablewidth. Remove global patterns variable, and pass down container object into parse_file from main. No functional change in all of this. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-08decodetree: Allow group covering the entire insn spaceRichard Henderson
This is an edge case for sure, but the logic that disallowed this case was faulty. Further, a few fixes scattered about can allow this to work. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-08decodetree: Split out MultiPattern from IncMultiPatternRichard Henderson
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-08decodetree: Rename MultiPattern to IncMultiPatternRichard Henderson
Name the current node for "inclusive" multi-pattern, in preparation for adding a node for "exclusive" multi-pattern. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-06-08decodetree: Tidy error_with_fileRichard Henderson
Use proper varargs to print the arguments. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-05-31python: remove more instances of sys.version_infoJohn Snow
We guarantee 3.5+ everywhere; remove more dead checks. In general, try to avoid using version checks and instead prefer to attempt behavior when possible. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20200514035230.25756-1-jsnow@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2020-03-30decodetree: Use Python3 floor division operatorPhilippe Mathieu-Daudé
This script started using Python2, where the 'classic' division operator returns the floor result. In commit 3d004a371 we started to use Python3, where the division operator returns the float result ('true division'). To keep the same behavior, use the 'floor division' operator "//" which returns the floor result. Fixes: 3d004a371 Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20200330121345.14665-1-f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2020-02-07scripts: Explicit usage of Python 3 (scripts with __main__)Philippe Mathieu-Daudé
Use the program search path to find the Python 3 interpreter. Patch created mechanically by running: $ sed -i "s,^#\!/usr/bin/\(env\ \)\?python$,#\!/usr/bin/env python3," \ $(git grep -l 'if __name__.*__main__') Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Suggested-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20200130163232.10446-6-philmd@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-08-19decodetree: Suppress redundant declaration warningsRichard Henderson
We can tell that a decodetree input file is "secondary" when it uses an argument set marked "!extern". This indicates that at least one of the insn translation functions will have already been declared by the "primary" input file, but given only the secondary we cannot tell which. Avoid redundant declaration warnings by suppressing them with pragmas. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-08-19decodetree: Allow !function with no input bitsRichard Henderson
Call this form a "parameter", returning a value extracted from the DisasContext. Reviewed-by: Philippe Mathieu-Daude <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-06-13decodetree: Fix comparison of FieldRichard Henderson
Typo comparing the sign of the field, twice, instead of also comparing the mask of the field (which itself encodes both position and length). Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20190604154225.26992-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-06decodetree: Add DisasContext argument to !function expandersRichard Henderson
This does require adjusting all existing users. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-06decodetree: Expand a decode_load functionRichard Henderson
Read the instruction, loading no more bytes than necessary. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-05-06decodetree: Initial support for variable-length ISAsRichard Henderson
Assuming that the ISA clearly describes how to determine the length of the instruction, and the ISA has a reasonable maximum instruction length, the input to the decoder can be right-justified in an appropriate insn word. This is not 100% convenient, as out-of-line %fields are numbered relative to the maximum instruction length, but this appears to still be usable. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Properly diagnose fields overflowing an insnRichard Henderson
Previously this would result in an exception for shifting the field mask by a negative number. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Prefix extract function names with decode_functionRichard Henderson
This makes it easier to name Formats within multiple decode files. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Allow +- to begin a number initializing a fieldRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Produce clean output for an empty input fileRichard Henderson
This is interesting for bisection, where an output file is plumbed, but does not yet have patterns. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Add --static-decode optionRichard Henderson
Like --decode, but do not drop 'static' qualifier. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Allow grouping of overlapping patternsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Do not unconditionaly return from Pattern.output_codeRichard Henderson
As a consequence, the 'return false' gets pushed up one level. This will allow us to perform some other action when the translator returns failure. Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Ensure build_tree does not include values outside insnmaskPhilippe Mathieu-Daudé
Reproduced with "scripts/decodetree.py /dev/null". Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-03-12decodetree: Move documentation to docs/devel/decodetree.rstRichard Henderson
One great big block comment isn't the best way to document the syntax of a language. Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-01-25decodetree: re.fullmatch was added in 3.4Paolo Bonzini
Python 3 versions earlier than 3.4 do not have it, use the same workaround that is in place for 3.0. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1548410602-16008-1-git-send-email-pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-11-01Merge remote-tracking branch 'remotes/rth/tags/pull-dt-20181031' into stagingPeter Maydell
Updates to decodetree.py for risc-v. # gpg: Signature made Wed 31 Oct 2018 16:52:07 GMT # gpg: using RSA key 64DF38E8AF7E215F # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-dt-20181031: decodetree: Allow multiple input files decodetree: Remove "insn" argument from trans_* expanders decodetree: Add !extern flag to argument sets Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-10-31decodetree: Allow multiple input filesRichard Henderson
While it would be possible to concatenate input files with make, passing the original input files to decodetree.py allows us to generate error messages which allows compilation environments (read: emacs) to next-error to the correct input file. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31decodetree: Remove "insn" argument from trans_* expandersRichard Henderson
This allows trans_* expanders to be shared between decoders for 32 and 16-bit insns, by not tying the expander to the size of the insn that produced it. This change requires adjusting the two existing users to match. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-31decodetree: Add !extern flag to argument setsRichard Henderson
Allow argument sets to be shared between two decoders by avoiding a re-declaration error. Make sure that anonymous argument sets and anonymous formats have unique names. Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-10-30scripts/decodetree.py: fix reference to attributesCleber Rosa
Signed-off-by: Cleber Rosa <crosa@redhat.com> Message-Id: <20181004161852.11673-9-crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2018-10-26scripts/decodetree.py: remove unused importsCleber Rosa
Signed-off-by: Cleber Rosa <crosa@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181004161852.11673-8-crosa@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-03-26scripts/decodetree: Fix insnmask not marked as global in main()Bastian Koppelmann
if '-w 16' was given as a cmdline args a local copy of insnmask is set and not the global one. Signed-off-by: Peer Adelt <peer.adelt@hni.uni-paderborn.de> Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Message-Id: <20180319115846.9662-1-kbastian@mail.uni-paderborn.de> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-03-02decodetree: Propagate return value from translate subroutinesRichard Henderson
Allow the translate subroutines to return false for invalid insns. At present we can of course invoke an invalid insn exception from within the translate subroutine, but in the short term this consolidates code. In the long term it would allow the decodetree language to support overlapping patterns for ISA extensions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180227232618.2908-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-22scripts: Add decodetree.pyRichard Henderson
To be used to decode ARM SVE, but could be used for any fixed-width ISA. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-02 03:39:46 +0000