aboutsummaryrefslogtreecommitdiff
path: root/savevm.c
AgeCommit message (Collapse)Author
2009-09-04monitor: Port handler_1 to use QDictLuiz Capitulino
This commit ports command handlers that receive one argument to use the new monitor's dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-04VMState: Fix sub-structs versioningJuan Quintela
We can't check the version in a substruct, it is not stored anywhere Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support to run a function after loadJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for int32_t check valueJuan Quintela
We read the saved value and check that it is less or equal than the one stored in the structure. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for static sized buffers (uint_8)Juan Quintela
This patch adds support for static sized buffer and typecheks that the buffer is right. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for variable sized arraysJuan Quintela
This patch add supports for variable sized arrays whose size is another field of the state. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for int32_t check valueJuan Quintela
We read the saved value and check that it is the same that the one is stored in the structure. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for structsJuan Quintela
This patch adds support for saving one VMStateDescription from other VMStateDescription. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for arraysJuan Quintela
This patch adds support for saving arrays inside the struct Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add VMState support for pointersJuan Quintela
This patch adds support for saving pointers to values Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27New VMstate save/load infrastructureJuan Quintela
This patch introduces VMState infrastructure, to convert the save/load functions of devices to a table approach. This new approach has the following advantages: - it is type-safe - you can't have load/save functions out of sync - will allows us to have new interesting commands, like dump <device>, that shows all its internal state. - Just now, the only added type is arrays, but we can add structures. - Uses old load_state() function for loading old state. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Add vmstate_load() and vmstate_save() functionsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27Use return value from load_state() call backJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27make load_vmstate() return errorsJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27move do_loadvm() to monitor.cJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27split do_loadvm() into do_loadvm() and load_vmstate()Juan Quintela
do_loadvm() is now called from the monitor. load_vmstate() is called by do_loadvm() and when -loadvm command line is used. Command line don't have to play games with vmstop()/vmstart() Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-27add file descriptor migrationPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Chris Lalancette <clalance@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-24unify popen/fopen qemu wrappersPaolo Bonzini
While reading Chris's code for fd migration I noticed the duplication between QEMUFilePopen and QEMUFileStdio. This fixes it, and makes qemu_fopen more similar qemu_popen. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27rename HOST_BSD to CONFIG_BSDJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27kill drives_tableGerd Hoffmann
First step cleaning up the drives handling. This one does nothing but removing drives_table[], still it became seriously big. drive_get_index() is gone and is replaced by drives_get() which hands out DriveInfo pointers instead of a table index. This needs adaption in *tons* of places all over. The drives are now maintained as linked list. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16fix segfault in setting migration speedGlauber Costa
Hi, Whoever wrote this migrate_set_speed function is totally stupid. Any failed or completed migration keeps its state to allow probing of migration data, but has no associated file anymore. It is, thus, possible to crash qemu by calling migrate_set_speed after a migration is finished (or failed, or cancelled), but before another one starts. This patch fixes it. Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16replace bdrv_{get, put}_buffer with bdrv_{load, save}_vmstateChristoph Hellwig
The VM state offset is a concept internal to the image format. Replace the old bdrv_{get,put}_buffer method that require an index into the image file that is constructed from the VM state offset and an offset into the vmstate with the bdrv_{load,save}_vmstate that just take an offset into the VM state. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-13exec-migration: handle EINTR in popen_get_buffer()Uri Lublin
Sometimes, upon interrupt, fread returns with no data, and the (incoming exec) migration fails. Fix by retrying on such a case. Signed-off-by: Uri Lublin <uril@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-06-13Fix mingw32 build warningsBlue Swirl
Work around buffer and ioctlsocket argument type signedness problems Suppress a prototype which is unused on mingw32 Expand a macro to avoid warnings from some GCC versions Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-09net: pass VLANClientState* as first arg to receive handlersMark McLoughlin
Give static type checking a chance to catch errors. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-06-09net: re-name vc->fd_read() to vc->receive()Mark McLoughlin
VLANClientState's fd_read() handler doesn't read from file descriptors, it adds a buffer to the client's receive queue. Re-name the handlers to make things a little less confusing. Signed-off-by: Mark McLoughlin <markmc@redhat.com>
2009-05-27Allow monitor interaction when using migrate -execChris Lalancette
All, I've recently been playing around with migration via exec. Unfortunately, when starting the incoming qemu process with "-incoming exec:cmd", it suffers the same problem that -incoming tcp used to suffer; namely, that you can't interact with the monitor until after the migration has happened. This causes problems for libvirt usage of -incoming exec, since libvirt expects to be able to access the monitor ahead of time. This fairly simple patch allows you to access the monitor both before and after the migration has completed using exec. (note: developed/tested with qemu-kvm, but applies perfectly fine to qemu) Signed-off-by: Chris Lalancette <clalance@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22introduce set_rate_limit function for QEMUFileGlauber Costa
This patch converts the current callers of qemu_fopen_ops(). Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Don't send all gratuitous packets at once.Gleb Natapov
Use timer to separate them in time. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-22Minimal ethernet frame length is 64 bytes.Gleb Natapov
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-05-01Make sure not to fall through on error in loadvmAnthony Liguori
This is from the KVM tree Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-04-17Add unregister_savevm() (Mark McLoughlin)aliguori
Currently there's no way to unregister a savevm callback, so e.g. if a NIC is hot-unplugged and a savevm is issued, we'll segfault. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7148 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05create qemu_file_set_error (Glauber Costa)aliguori
This is mainly for consistency, since we don't want anything outside of savevm setting it explicitly. There are current no users of that in qemu tree, but there are potential candidates on kvm-userspace. And avi is a nice guy, let's be nice with him. Based on a patch by Yaniv Kamay Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6998 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-05Fix savevm after BDRV_FILE size enforcementaliguori
We now enforce that you cannot write beyond the end of a non-growable file. qcow2 files are not growable but we rely on them being growable to do savevm/loadvm. Temporarily allow them to be growable by introducing a new API specifically for savevm read/write operations. Reported-by: malc Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6994 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-13make qemu_announce_self handle non contiguous net tables (Marcelo Tosatti)aliguori
With hotplug nd_table might contain holes. Noticed by Eduardo Habkost. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6844 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08Fix windows build and clean up use of <windows.h>aliguori
We want to globally define WIN_LEAN_AND_MEAN and WINVER to particular values so let's do it in OS_CFLAGS. Then, we can pepper in windows.h includes where using #includes that require it. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6783 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-08Rename _BSD to HOST_BSD so that it's more obvious that it's defined by configureblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6775 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Support for DragonFly BSD (Hasso Tepper)blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6746 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Fix BSD breakage from r6736blueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6742 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07Sparse fixes: NULL use, header order, ANSI prototypes, staticblueswir1
Fix Sparse warnings: * use NULL instead of plain 0 * rearrange header include order to avoid redefining types accidentally * ANSIfy SLIRP * avoid "restrict" keyword * add static git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6736 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-05monitor: Rework API (Jan Kiszka)aliguori
Refactor the monitor API and prepare it for decoupled terminals: term_print functions are renamed to monitor_* and all monitor services gain a new parameter (mon) that will once refer to the monitor instance the output is supposed to appear on. However, the argument remains unused for now. All monitor command callbacks are also extended by a mon parameter so that command handlers are able to pass an appropriate reference to monitor output services. For the case that monitor outputs so far happen without clearly identifiable context, the global variable cur_mon is introduced that shall once provide a pointer either to the current active monitor (while processing commands) or to the default one. On the mid or long term, those use case will be obsoleted so that this variable can be removed again. Due to the broad usage of the monitor interface, this patch mostly deals with converting users of the monitor API. A few of them are already extended to pass 'mon' from the command handler further down to internal functions that invoke monitor_printf. At this chance, monitor-related prototypes are moved from console.h to a new monitor.h. The same is done for the readline API. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
2009-02-05toplevel: remove error handling from qemu_malloc() callers (Avi Kivity)aliguori
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162
2008-12-11Fix handling of disk-only snapshots (Kevin Wolf)aliguori
When creating a snapshot with multiple qcow2 disks attached, the current behaviour is that qemu creates a disk snapshot on all of them and chooses one to write the VM state to. Despite having the state only in one image, loadvm tries to restore the VM state from the middle of nowhere if you run qemu a second time with only one of the other images attached. In the lucky case it will fail because there simply is no state, but it also can happen that it loads the state of a different snapshot (the one this new one is based upon). The fix is to write a zero VM state size to the images which don't contain the state, and check this in loadvm. I agree that you probably have to provoke such things intentionally to get in a state like this with qemu itself. However, with my second patch that adds snapshot support to qemu-img it could become a reasonable use case to have snapshots with and without VM states on the same image. Signed-off-by: Kevin Wolf <kwolf@suse.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5985 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-11Split savevm code into savevm.caliguori
This is pure code motion. The savevm code is all common code so we can build it once and share the object with all executables. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5700 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 05:59:51 +0000