aboutsummaryrefslogtreecommitdiff
path: root/savevm.c
AgeCommit message (Collapse)Author
2015-02-25Merge remote-tracking branch 'remotes/armbru/tags/pull-monitor-2015-02-18' ↵Peter Maydell
into staging hmp: Normalize HMP command handler names # gpg: Signature made Wed Feb 18 10:59:44 2015 GMT using RSA key ID EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" * remotes/armbru/tags/pull-monitor-2015-02-18: hmp: Name HMP info handler functions hmp_info_SUBCOMMAND() hmp: Name HMP command handler functions hmp_COMMAND() hmp: Clean up declarations for long-gone info handlers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-02-18hmp: Name HMP info handler functions hmp_info_SUBCOMMAND()Markus Armbruster
Some are called do_info_SUBCOMMAND() (old ones, usually), some hmp_info_SUBCOMMAND(), some SUBCOMMAND_info(), sometimes SUBCOMMAND pointlessly differs in spelling. Normalize to hmp_info_SUBCOMMAND(), where SUBCOMMAND is exactly the subcommand name with '-' replaced by '_'. Exceptions: * sun4m_irq_info(), sun4m_pic_info() renamed to sun4m_hmp_info_irq(), sun4m_hmp_info_pic(). * lm32_irq_info(), lm32_pic_info() renamed to lm32_hmp_info_irq(), lm32_hmp_info_pic(). Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-18hmp: Name HMP command handler functions hmp_COMMAND()Markus Armbruster
Some are called do_COMMAND() (old ones, usually), some hmp_COMMAND(), and sometimes COMMAND pointlessly differs in spelling. Normalize to hmp_COMMAND(), where COMMAND is exactly the command name with '-' replaced by '_'. Exceptions: * do_device_add() and client_migrate_info() *not* renamed to hmp_device_add(), hmp_client_migrate_info(), because they're also QMP handlers. They still need to be converted to QAPI. * do_memory_dump(), do_physical_memory_dump(), do_ioport_read(), do_ioport_write() renamed do hmp_* instead of hmp_x(), hmp_xp(), hmp_i(), hmp_o(), because those names are too cryptic for my taste. * do_info_help() renamed to hmp_info_help() instead of hmp_info(), because it only covers help. Signed-off-by: Markus Armbruster <armbru@redhat.com>
2015-02-16savevm: Improve error message for blocked migrationKevin Wolf
If an internal snapshot can't be saved because migration is blocked (most commonly probably because of AHCI), we had a really bad error message: $ echo -e "savevm foo\nquit" | qemu -M q35 /tmp/test.qcow2 -monitor stdio QEMU 2.2.50 monitor - type 'help' for more information (qemu) savevm foo Error -22 while writing VM (qemu) quit This patch converts qemu_savevm_state() to the Error infrastructure so that a useful error pointing to the problematic device is produced now: $ echo -e "savevm foo\nquit" | qemu -M q35 /tmp/test.qcow2 -monitor stdio QEMU 2.2.50 monitor - type 'help' for more information (qemu) savevm foo State blocked by non-migratable device '0000:00:1f.2/ich9_ahci' (qemu) quit Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1423574702-23072-1-git-send-email-kwolf@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2015-02-05migration: Append JSON description of migration streamAlexander Graf
One of the annoyances of the current migration format is the fact that it's not self-describing. In fact, it's not properly describing at all. Some code randomly scattered throughout QEMU elaborates roughly how to read and write a stream of bytes. We discussed an idea during KVM Forum 2013 to add a JSON description of the migration protocol itself to the migration stream. This patch adds a section after the VM_END migration end marker that contains description data on what the device sections of the stream are composed of. This approach is backwards compatible with any QEMU version reading the stream, because QEMU just stops reading after the VM_END marker and ignores any data following it. With an additional external program this allows us to decipher the contents of any migration stream and hopefully make migration bugs easier to track down. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-05Print errors in some of the early migration failure cases.Dr. David Alan Gilbert
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-05Migration: Add lots of trace eventsDr. David Alan Gilbert
Mostly on the load side, so that when we get a complaint about a migration failure we can figure out what it didn't like. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-02-05savevm: Convert fprintf to error_reportDr. David Alan Gilbert
Convert a bunch of fprintfs to error_reports Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-11-03snapshot: Reset err to NULL to avoid double freeChris Spiegel
If an error occurs in bdrv_snapshot_delete_by_id_or_name(), "err" is freed. If "err" is not set to NULL before calling bdrv_snapshot_delete_by_id_or_name() again, it will not be updated on error, and will be freed again. This can be triggered by starting a VM with at least two drives and then attempting to delete a non-existent snapshot. Broken in commit a89d89d. Signed-off-by: Chris Spiegel <chris.spiegel@cypherpath.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-id: 1412613225-32676-1-git-send-email-chris.spiegel@cypherpath.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-10-03snapshot: fix referencing wrong variable in while loop in do_delvmZhang Haoyu
The while loop variabal is "bs1", but "bs" is always passed to bdrv_snapshot_delete_by_id_or_name. Broken in commit a89d89d, v1.7.0. Signed-off-by: Zhang Haoyu <zhanghy@sangfor.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2014-06-25savevm: check vmsd for migratability statusMarcelo Tosatti
Check vmsd for unmigratable field, allowing migratibility status to be modified after vmstate_register. Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2014-06-23migration: dump vmstate info as a json file for static analysisAmit Shah
This commit adds a new command, '-dump-vmstate', that takes a filename as an argument. When executed, QEMU will dump the vmstate information for the machine type it's invoked with to the file, and quit. The JSON-format output can then be used to compare the vmstate info for different QEMU versions, specifically to test whether live migration would break due to changes in the vmstate data. A Python script that compares the output of such JSON dumps is included in the following commit. Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-06-19migration: introduce self_announce_delay()Jason Wang
This patch introduces self_announce_delay() to calculate the delay for the next announce round. This could be used by other device e.g virtio-net who wants to do announcing by itself. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-19migration: export SELF_ANNOUNCE_ROUNDSJason Wang
Export it for other users. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-06-17unset RAMBlock idstr when unregister MemoryRegionHu Tao
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2014-04-25qerror.h: Remove QERR defines that are only used onceCole Robinson
Just hardcode them in the callers Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-03-27migration: add more tracesAlexey Kardashevskiy
This replaces DPRINTF macro with tracepoints. This moves some messages from migration.c to savevm.c. This adds tracepoint to signal about fileds failed to migrate. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2014-03-08migration: extend section_start/end tracesAlexey Kardashevskiy
This adds @idstr to savevm_section_start and savevm_section_end tracepoints. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-02-17Use error_is_set() only when necessaryMarkus Armbruster
error_is_set(&var) is the same as var != NULL, but it takes whole-program analysis to figure that out. Unnecessarily hard for optimizers, static checkers, and human readers. Dumb it down to obvious. Gets rid of several dozen Coverity false positives. Note that the obvious form is already used in many places. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2014-01-13savevm: Small comment about why timer QEMUFile/VMState code is in savevm.cEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13qemu-file: Move QEMUFile code to qemu-file.cEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13vmstate: Move VMState code to vmstate.cEduardo Habkost
This will allow unit tests to be written for VMState code without pulling dependencies from the savevm code. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13savevm.c: Coding style fixEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13savevm.c: Coding style fixesEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13savevm: Convert all tabs to spacesEduardo Habkost
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13migration: Move QEMU_VM_* defines to migration/migration.hEduardo Habkost
The VMState code will be moved to vmstate.c and it uses some of the QEMU_VM_* constants, so move it to a header. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2014-01-13qemu-file: Make a few functions non-staticEduardo Habkost
The QEMUFile code will be moved to qemu-file.c. This will require making the following functions non-static because they are used by the savevm.c code: * qemu_peek_byte() * qemu_peek_buffer() * qemu_file_skip() * qemu_file_set_error() Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: Orit Wasserman <owasserm@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-11-20The calculation of bytes_xfer in qemu_put_buffer() is wrongWangting (Kathy)
In qemu_put_buffer(), bytes_xfer += size is wrong, it will be more than expected, and should be bytes_xfer += l. Signed-off-by: zhangmin <zhangmin6@huawei.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-09-24savevm: fix wrong initialization by ram_control_load_hookLei Li
It should set negative error value rather than 0 in QEMUFile if there has been an error. Reviewed-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-09-24savevm: add comments for qemu_file_get_error()Lei Li
Add comments for qemu_file_get_error(), as its return value is not very clear. Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-09-12snapshot: distinguish id and name in snapshot deleteWenchao Xia
Snapshot creation actually already distinguish id and name since it take a structured parameter *sn, but delete can't. Later an accurate delete is needed in qmp_transaction abort and blockdev-snapshot-delete-sync, so change its prototype. Also *errp is added to tip error, but return value is kepted to let caller check what kind of error happens. Existing caller for it are savevm, delvm and qemu-img, they are not impacted by introducing a new function bdrv_snapshot_delete_by_id_or_name(), which check the return value and do the operation again. Before this patch: For qcow2, it search id first then name to find the one to delete. For rbd, it search name. For sheepdog, it does nothing. After this patch: For qcow2, logic is the same by call it twice in caller. For rbd, it always fails in delete with id, but still search for name in second try, no change to user. Some code for *errp is based on Pavel's patch. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Pavel Hrdina <phrdina@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-08-22aio / timers: Switch entire codebase to the new timer APIAlex Bligh
This is an autogenerated patch using scripts/switch-timer-api. Switch the entire code base to using the new timer API. Note this patch may introduce some line length issues. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Rearrange timer.h & make legacy functions call non-legacyAlex Bligh
Rearrange timer.h so it is in order by function type. Make legacy functions call non-legacy functions rather than vice-versa. Convert cpus.c to use new API. Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-08-22aio / timers: Rename qemu_timer_* functionsAlex Bligh
Rename four functions in preparation for new API. Rename qemu_timer_expired to timer_expired Rename qemu_timer_expire_time_ns to timer_expire_time_ns Rename qemu_timer_pending to timer_pending Rename qemu_timer_expired_ns to timer_expired_ns Signed-off-by: Alex Bligh <alex@alex.org.uk> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-07-23rdma: bugfix: ram_control_save_page()Michael R. Hines
We were not checking for a valid 'bytes_sent' pointer before accessing it. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27rdma: new QEMUFileOps hooksMichael R. Hines
These are the prototypes and implementation of new hooks that RDMA takes advantage of to perform dynamic page registration. An optional hook is also introduced for a custom function to be able to override the default save_page function. Also included are the prototypes and accessor methods used by arch_init.c which invoke funtions inside savevm.c to call out to the hooks that may or may not have been overridden inside of QEMUFileOps. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27rdma: export qemu_fflush()Michael R. Hines
RDMA uses this to flush the control channel before sending its own message to handle page registrations. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27rdma: introduce qemu_file_mode_is_not_valid()Michael R. Hines
QEMUFileRDMA also has read and write modes. This function is now shared to reduce code duplication. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27rdma: export yield_until_fd_readable()Michael R. Hines
The RDMA event channel can be made non-blocking just like a TCP socket. Exporting this function allows us to yield so that the QEMU monitor remains available. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-27rdma: introduce qemu_update_position()Michael R. Hines
RDMA writes happen asynchronously, and thus the performance accounting also needs to be able to occur asynchronously. This allows anybody to call into savevm.c to update both f->pos as well as into arch_init.c to update the acct_info structure with up-to-date values when the RDMA transfer actually completes. Reviewed-by: Juan Quintela <quintela@redhat.com> Tested-by: Chegu Vinod <chegu_vinod@hp.com> Tested-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Michael R. Hines <mrhines@us.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-06-21savevm: Fix potential memory leakStefan Weil
The leak was reported by cppcheck. Fix it by moving the g_malloc0 after the argument validity check. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-06-17savevm: qmp_xen_save_devices_state(): use error_setg_file_open()Luiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: dump snapshot and image info to specified outputWenchao Xia
bdrv_snapshot_dump() and bdrv_image_info_dump() do not dump to a buffer now, some internal buffers are still used for format control, which have no chance to be truncated. As a result, these two functions have no more issue of truncation, and they can be used by both qemu and qemu-img with correct parameter specified. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: move qmp and info dump related code to block/qapi.cWenchao Xia
This patch is a pure code move patch, except following modification: 1 get_human_readable_size() is changed to static function. 2 dump_human_image_info() is renamed to bdrv_image_info_dump(). 3 in qmp_query_block() and qmp_query_blockstats, use bdrv_next(bs) instead of direct traverse of global array 'bdrv_states'. 4 collect_snapshots() and collect_image_info() are renamed, unused parameter *fmt in collect_image_info() is removed. 5 code style fix. To avoid conflict and tip better, macro in header file is BLOCK_QAPI_H instead of QAPI_H. Now block.h and snapshot.h are at the same level in include path, block_int.h and qapi.h will both include them. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: move snapshot code in block.c to block/snapshot.cWenchao Xia
All snapshot related code, except bdrv_snapshot_dump() and bdrv_is_snapshot(), is moved to block/snapshot.c. bdrv_snapshot_dump() will be moved to another file later. bdrv_is_snapshot() is not related with internal snapshot. It also fixes small code style errors reported by check script. Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-04block: drop bs_snapshots global variableStefan Hajnoczi
The bs_snapshots global variable points to the BlockDriverState which will be used to save vmstate. This is really a savevm.c concept but was moved into block.c:bdrv_snapshots() when it became clear that hotplug could result in a dangling pointer. While auditing the block layer's global state I came upon bs_snapshots and realized that a variable is not necessary here. Simply find the first BlockDriverState capable of internal snapshots each time this is needed. The behavior of bdrv_snapshots() is preserved across hotplug because new drives are always appended to the bdrv_states list. This means that calling the new find_vmstate_bs() function is idempotent - it returns the same BlockDriverState unless it was hot-unplugged. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-06-01do not check pointers after dereferencing themPaolo Bonzini
Two instances, both spotted by Coverity. In one, two blocks were swapped. In the other, the check is not needed anymore. Cc: qemu-stable@nongnu.org Cc: qemu-trivial@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-04-17qemu-file: do not use stdio for qemu_fdopenPaolo Bonzini
This uses system calls directly for Unix file descriptors, so that the efficient writev_buffer can be used. Pay attention to the possibility of partial writes in writev. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-17qemu-file: drop socket_put_bufferPaolo Bonzini
It is enough to implement one of socket_writev_buffer and socket_put_buffer. Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Orit Wassermann <owasserm@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-04-15Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
* stefanha/block: rbd: add an asynchronous flush iotests: Add 'check -ssh' option to test Secure Shell block device. block: ssh: Use libssh2_sftp_fsync (if supported by libssh2) to flush to disk. block: Add support for Secure Shell (ssh) block device. ide: refuse WIN_READ_NATIVE_MAX on empty device qemu-iotests: filter QEMU_PROG in 051.out qemu-iotests: Add test for -drive options qemu-iotests: A few more bdrv_pread/pwrite tests block: Introduce bdrv_pwritev() for qcow2_save_vmstate savevm: Implement block_writev_buffer() block: Introduce bdrv_writev_vmstate Conflicts: savevm.c aliguori: add f->pos parameter to writev_buffer(). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 16:59:17 +0000