| Age | Commit message (Collapse) | Author |
|---|
|
Seabios 1.12 has been released yesterday. Update
our snapshot builds to the final release.
git shortlog
============
Kevin O'Connor (2):
shadow: Rework bios copy code to prevent gcc array-bounds warning
docs: Note v1.12.0 release
Shmuel Eiderman (1):
pvscsi: Scan all 64 possible targets
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
seabios 1.12 release is planned for november.
update seabios to a master branch snapshot so it gets more testing
and to make the delta smaller when updating to -final during freeze.
git shortlog rel-1.11.2..14221cd86e
===================================
Gerd Hoffmann (12):
optionrom: enable non-vga display devices
cbvga: factor out cbvga_setup_modes()
qemu: add bochs-display support
cbvga_setup_modes: use real mode number instead of 0x140
cbvga_list_modes: don't list current mode twice
cbvga_set_mode: disable clearmem in windows x86 emulator.
bochs_display_setup: return error on failure
pmm: use tmp zone on oom
vgasrc: add allocate_pmm()
qemu: add qemu ramfb support
cbvga_set_mode: refine clear display logic
pretty boot menu entry for cdrom drives
Jing Liu (3):
pci: fix the return value for truncated capability
pci: clean up the debug message for pci capability found
pci: recognize RH PCI legacy bridge resource reservation capability
Kevin O'Connor (8):
docs: Add sercon-port to Runtime_config.md documentation
paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
shadow: Don't invoke a shutdown on reboot unless in a reboot loop
build: Use git describe --always
docs: Update Download.md to use git clone via https
ssdt: Fix building of legacy acpi tables on current iasl compiler
docs: Update download file link
sdcard: Increase SDHCI_POWER_ON_TIME to 5ms
Marc-André Lureau (4):
x86: add readq()
tpm: generalize init_timeout()
tpm: use get_tpm_version() callback
tpm: add TPM CRB device support
Marcel Apfelbaum (1):
pci: fix 'io hints' capability for RedHat PCI bridges
Matt DeVillier (2):
nvme: fix I/O queue length calculation overflow
SeaVGABios/cbvga: Fix bpp for coreboot framebuffer
Nikolay Nikolov (11):
floppy: Introduce the floppy_dor_read() function
floppy: Introduce floppy_dor_mask()
floppy: Introduce FLOPPY_DOR_XXX constants
floppy: Preserve motor and drive sel bits when resetting the floppy controller
floppy: Reset the floppy motor count in floppy_drive_pio()
floppy: Use timer_check() in floppy_wait_irq()
floppy: hold the DOR reset bit low for 4 microseconds, when resetting
floppy: Execute a SPECIFY command after sensing the media type
floppy: Support up to 4 floppy drives when turning on the floppy motor
floppy: Wait for the floppy motor to reach a stable speed, after starting
floppy: Send 4 sense interrupt commands during controller initialization
Paul Menzel (1):
docs/Download: Use more secure HTTPS URLs where possible
Stefan Berger (5):
tpm: Add support for TPM2 ACPI table
tpm: Wait for tpmRegValidSts flag on CRB interface before probing
tpm: revert return values for successful/failed CRB probing
tpm: when CRB is active, select, lock it, and check addresses
tpm: Request access to locality 0
Stephen Douthit (3):
tpm: Refactor duplicated wait code in tis_wait_sts() & crb_wait_reg()
tpm: Wait for interface startup when probing
tpm: Handle unimplemented TIS_REG_IFACE_ID in tis_get_tpm_version()
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
This includes gcc8.1 fixes and the image is compiled using gcc 8.1 as well.
The full list of changes is:
> Fix bad assembler statements for compiling with gcc 8.1 / as 2.30
> libelf: Add REL32 to the list of ignored relocations
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Update the submodule and u-boot-sam460-20100605.bin to include
following fixes from Sebastian Bauer:
- Fix build with newer gcc
- Decrease unnecessary delay which fixes slow booting from CD
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
It's the old, lgpl vgabios implementation.
Was left in as fallback when we switched to seavgabios, so we could
easily switch back in case we see regressions. It's unused since years
now, reportedly doesn't even build, and lacks support for recently (and
not so recently) added display devices.
Zap it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
QNX reportedly requires this to boot.
Should also speed up booting other guests.
Note: Upstream seabios defaults this to 'n' to due to known problems
on physical hardware (qemu not affected), and wouldn't flip the default
to 'y'. So we adjust our local build config accordingly.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Both bochs-display and ramfb are devices with a simple framebuffer and
no vga emulation or text mode. seavgabios has support for text mode
emulation (at vgabios call level), we are using that to provide some
vga compatibility support for these devices.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
git shortlog rel-1.11.1..rel-1.11.2
-----------------------------------
Gerd Hoffmann (11):
optionrom: enable non-vga display devices
cbvga: factor out cbvga_setup_modes()
qemu: add bochs-display support
cbvga_setup_modes: use real mode number instead of 0x140
cbvga_list_modes: don't list current mode twice
cbvga_set_mode: disable clearmem in windows x86 emulator.
bochs_display_setup: return error on failure
pmm: use tmp zone on oom
vgasrc: add allocate_pmm()
qemu: add qemu ramfb support
cbvga_set_mode: refine clear display logic
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The changes are:
1. fixed broken_sc1;
2. added switching between boot consoles;
3. added PXE boot.
The full list is:
> lib/libnet/pxelinux: Fix two off-by-one bugs in the pxelinux.cfg parser
> lib/libnet/pxelinux: Make the size handling for pxelinux_load_cfg more logical
> libc: Add a simple implementation of an assert() function
> libnet: Support UUID-based pxelinux.cfg file names
> slof: Add a helper function to get the contents of a property in C code
> libnet: Add support for DHCPv4 options 209 and 210
> libnet: Wire up pxelinux.cfg network booting
> libnet: Add functions for downloading and parsing pxelinux.cfg files
> libnet: Put code for determing TFTP error strings into a separate function
> libc: Add the snprintf() function
> libnet: Pass ip_version via struct filename_ip
> resolve ihandle and xt handle in the input command (like for the output)
> Fix output word
> obp-tftp: Make sure to not overwrite paflof in memory
> libnet: Get rid of unused huge_load and block_size parameters
> libc: Check for NULL pointers in free()
> libc: Implement strrchr()
> libnet: Get rid of unnecessary (char *) casts
> broken_sc1: check for H_PRIVILEGE
> OF: Use new property "stdout-path" for boot console
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
- cleanup in virtio-ccw
- accommodate guests using vfio-ccw without specifying unlimited
prefetch, but actually working fine
- add cpu model for the z14 Model ZR1
- add support for pxelinux.cfg-style network booting to the s390x
firmware
# gpg: Signature made Tue 19 Jun 2018 10:33:06 BST
# gpg: using RSA key DECF6B93C6F02FAF
# gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>"
# gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>"
# gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>"
# gpg: aka "Cornelia Huck <cohuck@kernel.org>"
# gpg: aka "Cornelia Huck <cohuck@redhat.com>"
# Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF
* remotes/cohuck/tags/s390x-20180619:
pc-bios/s390-ccw: Update the s390-netboot.img binary
pc-bios/s390-ccw: Optimize the s390-netboot.img for size
pc-bios/s390-ccw/net: Try to load pxelinux.cfg file accoring to the UUID
pc-bios/s390-ccw/net: Add support for pxelinux-style config files
pc-bios/s390-ccw/net: Update code for the latest changes in SLOF
roms: Update SLOF submodule to current status
pc-bios/s390-ccw: define loadparm length
s390x/cpumodels: add z14 Model ZR1
s390x/ipl: Try to detect Linux vs non Linux for initial IPL PSW
vfio-ccw: remove orb.c64 (64 bit data addresses) check
vfio-ccw: add force unlimited prefetch property
virtio-ccw: clean up notify
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
We need the latest version of SLOF's libnet for adding pxelinux.cfg
support in the s390-ccw bios, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Now that we have a mirror of this repo on git.qemu.org change the
submodule to use that and update it to latest commit which fixes a
dangling symlink and removes two big binaries that are not needed.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
A dozen or so fixes from Helge upstream.
|
|
git shortlog rel-1.11.0..rel-1.11.1
===================================
Kevin O'Connor (3):
build: Use git describe --always
shadow: Don't invoke a shutdown on reboot unless in a reboot loop
paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified
Marcel Apfelbaum (1):
pci: fix 'io hints' capability for RedHat PCI bridges
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
This is skiboot 5.9 (commit e0ee24c2). It brings improved POWER9
support among many other things. Built from submodule.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
The main changes are:
- able to handle more devices with specified bootindex;
- implements flatten device tree rendering, for both QEMU and guest kernel.
The full list is:
> boot: use a temporary bootdev-buf
> boot: do not concatenate bootdev
> libvirtio: Mark struct virtio_scsi_req_cmd as packed
> fdt: Implement "fdt-fetch" method for client interface
> rtas: Store RTAS address and entry in the device tree
> board-qemu: Fix slof-build-id length
> fdt: Pass the resulting device tree to QEMU
> fdt: Fix version and add a word for FDT header size
> tree: Rework set-chosen-cpu and store /chosen ihandle and phandle
> node: Add some documentation
> Revert various SLOF-to-QEMU private hypercalls
> Use input-device and output-device
> netboot: Create bootp-response when bootp is used
> libnet/ipv6: assign times_asked value directly
> usb-xhci: Reset ERSTSZ together with ERSTBA
> virtio-net: rework the driver to support multiple open
> board-qemu: add private hcall to inform host on "phandle" update
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Update our pre-release seabios snapshot to the final release.
git shortlog
============
Gerd Hoffmann (1):
sercon: Disable ScreenAndDebug in case both serial console and serial debug are active
Kevin O'Connor (2):
timer: Avoid integer overflows in usec and nsec calculations
docs: Note v1.11.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
This is the seabios update for qemu 2.11. Well, almost, seabios is in
freeze for the upcoming 1.11 release. This updates seabios to current
git master snapshot, and it will be updated again to 1.11 final before
the 2.11 release.
With this two-step seabios gets some more wide testing before the actual
release and the update to 1.11 final (which will most likely happen
after qemu freeze) should have bugfix patches only.
git shortlog
============
Aleksandr Bezzubikov (3):
pci: refactor pci_find_capapibilty to get bdf as the first argument instead of the whole pci_device
pci: add QEMU-specific PCI capability structure
pci: enable RedHat PCI bridges to reserve additional resources on PCI init
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Daniel Verkamp (5):
nvme: support NVMe 1.0 controllers
nvme: extend command timeout to 5 seconds
nvme: fix reversed loop condition in cmd_readwrite
nvme: fix extraction of status code bits
nvme: fix copy-paste mistake in comment
Filippo Sironi (1):
nvme: Use the Maximum Queue Entries Supported (MQES) to initialize I/O queues
Gerd Hoffmann (7):
usb: add hub portmap
usb-xhci: use hub portmap
std: add cp437 to unicode map
kbd: make enqueue_key public, add ascii_to_keycode
romfile: add support for constant files.
paravirt: serial console configuration.
add serial console support
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Jason Wang (1):
virtio: IOMMU support
Julian Stecklina (2):
block: add NVMe boot support
nvme: fix out of memory behavior
Julius Werner (1):
coreboot: Adapt to upstream CBMEM console changes
Kevin O'Connor (26):
usb: Make usb_time_sigatt variable static
tpm: Add comment banners to tcg.c separating major parts of spec
tpm: Don't call tpm_set_failure() from tpm12_get_capability()
tpm: Move code around in tcgbios.c to keep like code together
acpi: Generalize find_fadt() and find_tcpa_by_rsdp() into find_acpi_table()
tpm: Don't call tpm_build_and_send_cmd() from tpm20_stirrandom()
tpm: Rework tpm_build_and_send_cmd() into tpm_simple_cmd()
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
docs: Note release dates for 1.10.1 and 1.10.2
resume: Don't attempt to use generic reboot mechanisms on QEMU
boot: Increase description size in boot menu
src: Minor - remove tab characters that slipped into SeaBIOS C code
NVMe: Allow NVMe to be enabled on real hardware
smm: Backup and restore A20 on an SMI based mode switch
stacks: Make sure to initialize Call16Data
stacks: Don't update the A20 settings if they haven't changed
stacks: There is no need to disable NMI if it is already disabled
vga: Fix bug in stdvga_get_linesize()
docs: Fix typos in Memory_Model.md
tcgbios: Fix use of unitialized variable
boot: Rename drive_g to drive
disk: Don't require the 'struct drive_s' to be in the f-segment
block: Rename disk_op_s->drive_gf to drive_fl
virtio: Allocate drive_s storage in low memory
xhci: Build TRBs directly in xhci_trb_queue()
xhci: Verify the device is still present in xhci_cmd_submit()
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Patrick Rudolph (4):
SeaVGABios/cbvga: Advertise correct pixel format
SeaVGABIOS/vbe: Query driver for scanline pitch v2
SeaVGABios/cbvga: Use active mode to clear screen
SeaVGABios/cbvga: Advertise compatible VESA modes
Paul Menzel (1):
vgasrc: Increase debug level
Petr Berky (1):
config: Add function to check if fw_cfg exists
Ricardo Ribalda Delgado (1):
serialio: Support for mmap serial ports
Roman Kagan (11):
blockcmd: accept only disks and CD-ROMs
blockcmd: generic SCSI luns enumeration
virtio-scsi: enumerate luns with REPORT LUNS
esp-scsi: enumerate luns with REPORT LUNS
usb-uas: enumerate luns with REPORT LUNS
pvscsi: fix the comment about lun enumeration
mpt-scsi: try to enumerate luns with REPORT LUNS
lsi-scsi: reset in case of a serious problem
lsi-scsi: try to enumerate luns with REPORT LUNS
blockcmd: start REPORT_LUNS with the smallest buffer
Revert "lsi-scsi: reset in case of a serious problem"
Stefan Berger (1):
tpm: Log TPM 2 digest structure in little endian format
Youness Alaoui (1):
nvme: Enable NVMe support for non-qemu hardware
Zeh, Werner (1):
ahci: Disable Native Command Queueing
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The main changes are:
- fixes in PCI bridges code;
- LUN>255 are allowed not in virtio-scsi.
The full list is:
> pci-scan: Fix pci-bridge-set-mem-base and pci-bridge-set-mem-limit
> pci: Avoid 32-bit prefetchable memory area if possible
> Remove unused functions ishexdigit and $cat-comma
> pci: Translate PCI addresses to host addresses at the end of map-in
> Define 'open' and 'close' words of the /aliases nodes right from the start
> virtio-scsi: Allow LUNs bigger than 255
> paflof: Silence gcc's -Warray-bounds warning for stack pointers
> board_qemu: move code out of fdt-fix-node-phandle
> board_qemu: drop unused values early in fdt-fix-node-phandle
> pci: Improve the pci-var-out debug function
> libhvcall: drop unused KVMPPC_H_REPORT_MC_ERR and KVMPPC_H_NMI_MCE defines
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
staging
Pull request
# gpg: Signature made Mon 17 Jul 2017 10:04:11 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/ipxe-pull-request:
ipxe: update to commit 0600d3ae94
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Quite a while has passed since we last updated U-Boot for e500. This patch
bumps it to the last released version 2017.07 to make sure users don't feel
like they're using out of date software.
Signed-off-by: Alexander Graf <agraf@suse.de>
Tested-by: Thomas Huth <thuth@redhat.com>
Message-id: 1499862868-102130-1-git-send-email-agraf@suse.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Rebase ipxe to latest git master.
Pick up four virtio-net fixes.
complete shortlog of ipxe changes
---------------------------------
Adamczyk, Konrad (1):
[thunderx] Use ThunderxConfigProtocol to obtain board configuration
Bartosz Szczepanek (1):
[thunderx] Fix hardware deinitialization
Christian Nilsson (1):
[intel] Add INTEL_NO_PHY_RST for I219-LM (2)
David Decotigny (2):
[build] Return const char * from uuid_ntoa()
[af_packet] Add new AF_PACKET driver for Linux
Jason Wang (1):
[virtio] Support VIRTIO_NET_F_IOMMU_PLATFORM
Jerone Young (1):
[intel] Add support for I219-V in 7th Gen Intel NUC
Konrad Adamczyk (1):
[thunderx] Don't disable NIC when exiting from iPXE
Ladi Prosek (3):
[virtio] Cap queue size to MAX_QUEUE_NUM
[virtio] Simplify virtqueue shutdown
[virtio] Remove queue size limit in legacy virtio
Martin Habets (1):
[sfc] Add driver for Solarflare SFC8XXX adapters
Michael Brown (159):
[interface] Provide intf_reinit() to reinitialise nullified interfaces
[iscsi] Avoid potential infinite loops during shutdown
[efi] Add basic EFI SAN booting capability
[undi] Allocate base memory before calling UNDI loader entry point
[romprefix] Avoid using PMM-allocated memory in UNDI loader entry point
[undi] Clean up driver and device name information
[prefix] Remove impossible progress message
[prefix] Include diagnostic information within progress messages
[undi] Try matching UNDI ROMs in BIOS enumeration order
[efi] Work around temporal anomaly encountered during ExitBootServices()
[ipv4] Accept unicast packets for the local network broadcast address
[build] Add %.vhd target for building VM bootable disk images
[virtio] Use separate RX and TX empty header buffers
[cloud] Add ability to retrieve Google Compute Engine metadata
[virtio] Use host-specified MTU when available
[netdevice] Allow MTU to be changed at runtime
[cloud] Show CPU vendor and model in example cloud boot scripts
[hyperv] Ignore unsolicited VMBus messages
[pic8259] Fix definitions for "read IRR" and "read ISR" commands
[efi] Fix building elf2efi.c when -fpic is enabled by default
[interface] Avoid unnecessary reference counting in intf_unplug()
[interface] Remove misleading comment
[interface] Unplug interface before calling intf_close() in intf_shutdown()
[netdevice] Limit MTU by hardware maximum frame length
[cpuid] Provide cpuid_supported() to test for supported functions
[time] Allow timer to be selected at runtime
[hyperv] Provide timer based on the 10MHz time reference count MSR
[int13] Avoid potential division by zero
[int13] Test correct return status from INT 13 calls
[settings] Add "unixtime" builtin setting to expose the current time
[time] Report attempts to use timers before initialisation
[interface] Provide the ability to shut down multiple interfaces
[http] Cleanly shut down potentially looped interfaces
[efi] Add missing SANBOOT_PROTO_HTTP to EFI default configuration
[block] Remove spurious comments
[block] Centralise SAN device abstraction
[block] Centralise "san-drive" setting
[int13] Refactor to use centralised SAN device abstraction
[efi] Refactor to use centralised SAN device abstraction
[block] Retry any SAN device operation
[iscsi] Use intfs_shutdown() when shutting down multiple interfaces
[scsi] Use intfs_shutdown() when shutting down multiple interfaces
[block] Use intfs_shutdown() when shutting down multiple interfaces
[scsi] Avoid duplicate calls to scsicmd_close()
[build] Provide common ARRAY_SIZE() definition
[efi] Update to current EDK2 headers
[efi] Add EFI_ACPI_TABLE_PROTOCOL header and GUID definition
[efi] Provide ACPI table description for SAN devices
[efi] Skip cable detection at initialisation where possible
[undi] Move PXE API caller back into UNDI driver
[dhcp] Allow vendor class to be changed in DHCP requests
[hermon] Avoid potential integer overflow when calculating memory mappings
[arbel] Avoid potential integer overflow when calculating memory mappings
[xfer] Ensure va_end() is called on failure path
[nfs] Fix double free bug on error path
[linda] Use correct length for memset()
[qib7322] Use correct length for memset()
[sis900] Remove extraneous memset() with incorrect length
[802.11] Remove redundant NULL pointer check after dereference
[crypto] Free correct pointer on the error path
[librm] Fail gracefully if asked to ioremap() a zero length
[usb] Use correct length for memcpy()
[mucurses] Attempt to fix test for empty string
[mucurses] Attempt to fix keypress processing logic
[mucurses] Attempt to fix resource leaks
[hyperv] Fix resource leaks on error path
[slam] Fix resource leak on error path
[slam] Avoid NULL pointer dereference in slam_pull_value()
[eoib] Avoid passing a NULL I/O buffer to netdev_tx_complete_err()
[http] Add missing check for memory allocation failure
[mucurses] Attempt to fix use of uninitialised buffer with strcat()
[xhci] Avoid accessing beyond end of endpoint context array
[build] Avoid confusing sparse in single-argument DBG() macros
[infiniband] Return status code from ib_create_cq() and ib_create_qp()
[infiniband] Return status code from ib_create_mi()
[block] Quell spurious Coverity size mismatch warning
[ath] Add missing break statements
[pixbuf] Avoid potential division by zero
[usb] Use correct length for memcpy()
[xen] Use standard calling pattern for asprintf()
[tcp] Use correct length for memset()
[video_subr] Use memmove() for overlapping memory copy
[arbel] Assert that mapping length is non-zero
[hermon] Assert that mapping length is non-zero
[tlan] Guard against failure to identify chip
[w89c840] Avoid potential array overrun
[sis190] Avoid NULL pointer dereference
[mucurses] Ensure SLK labels are always terminated
[coverity] Add Coverity user model
[malloc] Track maximum heap usage
[travis] Add minimal .travis.yml file
[travis] Build and run the unit test suite
[travis] Integrate with Coverity Scan
[rtl818x] Fix resource leak on error path
[pcnet32] Eliminate redundant register read
[iobuf] Increase minimum I/O buffer size to 128 bytes
[vxge] Fix use of stale I/O buffer on error path
[scsi] Avoid duplicate call to scsicmd_close() on TEST UNIT READY failure
[block] Add dummy SAN device
[block] Add basic multipath support
[int13] Improve geometry guessing for unaligned partitions
[int13con] Avoid overwriting random portions of SAN boot disks
[time] Add sleep_fixed() function to sleep without checking for Ctrl-C
[block] Allow SAN retry count to be reconfigured
[block] Add a small delay between attempts to reopen SAN targets
[block] Retry reopening indefinitely for multipath devices
[block] Gracefully close SAN device if registration fails
[linux] Use dummy SAN device
[block] Ignore redundant xfer_window_changed() messages
[block] Describe all SAN devices via ACPI tables
[iscsi] Do not install iBFT when no iSCSI targets exist
[http] Notify data transfer interface when underlying connection is ready
[mucurses] Fix erroneous __nonnull attribute
[build] Avoid implicit-fallthrough warnings on GCC 7
[linux] Fix building with kernel 4.11 headers
[scsi] Retry TEST UNIT READY command
[libc] Add stdbool.h standard header
[efi] Fix typo in efi_acpi_table_protocol_guid
[efi] Add efi_sprintf() and efi_vsprintf()
[block] Allow use of a non-default EFI SAN boot filename
[intel] Show original CTRL and STATUS values in debugging output
[intel] Do not enable ASDE on i350 backplane NIC
[block] Provide sandev_read() and sandev_write() as global symbols
[block] Provide abstraction to allow system to be quiesced
[hyperv] Do not fail if guest OS ID MSR is already set
[hyperv] Remove redundant return status code from mapping functions
[hyperv] Cope with Windows Server 2016 enlightenments
[efi] Standardise PCI debug messages
[iscsi] Always send FirstBurstLength parameter
[iscsi] Fix iBFT when no explicit initiator name setting exists
[xen] Provide 18 4kB receive buffers to work around xen-netback bug
[efi] Prevent EFI code from being linked in to non-EFI builds
[tls] Keep cipherstream window open until TLS negotiation is complete
[settings] Extend numerical setting tags to 64 bits
[acpi] Make acpi_find_rsdt() a per-platform method
[efi] Provide access to ACPI tables
[acpi] Expose ACPI tables via settings mechanism
[syslog] Handle backspace characters
[hdprefix] Avoid attempts to read beyond the end of the disk
[usb] Allow for USB network devices with no interrupt endpoint
[build] Use -no-pie on newer versions of gcc
[ecm] Display invalid MAC address strings in debug messages
[cpuid] Allow input %ecx value to be specified
[crypto] Expose RSA_CTX_SIZE constant
[crypto] Expose asn1_grow()
[crypto] Provide asn1_built() to construct a cursor from a builder
[crypto] Expose pem_asn1() for use with non-image data
[exanic] Add driver for Exablaze ExaNIC cards
[usb] Use non-zero language ID to retrieve strings
[mucurses] Avoid potential division by zero
[tls] Support RFC5746 secure renegotiation
[smscusb] Abstract out common SMSC USB device functionality
[smsc95xx] Use common SMSC USB device functionality
[smsc75xx] Use common SMSC USB device functionality
[smscusb] Add ability to read MAC address from OTP
[smscusb] Move non-inline register access functions to smscusb.c
[smscusb] Allow for alternative PHY register layouts
[smsc75xx] Expose functionality shared with LAN78xx devices
[lan78xx] Add driver for Microchip LAN78xx USB Ethernet NICs
Mika Tiainen (1):
[intel] Add INTEL_NO_PHY_RST for I219-V
Mike McCormack (1):
[sky2] Use 32-bit read to read Y2_VAUX_AVAIL
Raed Salem (2):
[golan] Update Connect-IB, ConnectX-4 and ConnectX-4 Lx (Infiniband) support
[golan] Bug fixes and improved paging allocation method
Vishvananda Ishaya (1):
[intel] Reset all virtual function settings
Vishvananda Ishaya Abrams (1):
[iscsi] Don't close when receiving NOP-In
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
staging
s390x/kvm/migration/cpumodel: fixes, enhancements and cleanups
- add a network boot rom for s390 (Thomas Huth)
- migration of storage attributes like the CMMA used/unused state
- PCI related enhancements - full support for aen, ais and zpci
- migration support for css with vmstates (Halil Pasic)
- cpu model enhancements for cpu features
- guarded storage support
# gpg: Signature made Fri 14 Jul 2017 11:33:04 BST
# gpg: using RSA key 0x117BBC80B5A61C7C
# gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>"
# Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C
* remotes/borntraeger/tags/s390x-20170714: (40 commits)
s390x/gdb: add gs registers
s390x/arch_dump: also dump guarded storage control block
s390x/kvm: enable guarded storage
s390x/kvm: Enable KSS facility for nested virtualization
s390x/cpumodel: add esop/esop2 to z12 model
s390x/cpumodel: we are always in zarchitecture mode
s390x/cpumodel: wire up new hardware features
s390x/flic: migrate ais states
s390x/cpumodel: add zpci, aen and ais facilities
s390x: initialize cpu firstly
pc-bios/s390: rebuild s390-ccw.img
pc-bios/s390: add s390-netboot.img
pc-bios/s390-ccw: Link libnet into the netboot image and do the TFTP load
pc-bios/s390-ccw: Add virtio-net driver code
pc-bios/s390-ccw: Add core files for the network bootloading program
roms/SLOF: Update submodule to latest status
pc-bios/s390-ccw: Add code for virtio feature negotiation
pc-bios/s390-ccw: Remove unused structs from virtio.h
pc-bios/s390-ccw: Move byteswap functions to a separate header
pc-bios/s390-ccw: Add a write() function for stdio
...
Conflicts:
target/s390x/kvm.c
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We need the latest fixes for building the libc and libnet
of SLOF for the s390-ccw network bootloader firmware.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <1499863793-18627-9-git-send-email-thuth@redhat.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
The QemuMacDrivers project provides virtualisation drivers for PPC MacOS
guests.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
Update the submodule and rebuild the binary.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
Various fixes in this update, the full list is:
> qemu-bootlist: Take the "-boot strict=off" setting properly into account
> virtio-scsi: initialize vring avail queue buffers
> virtio: Remove global variables in block and 9p driver
> Remove superfluous checkpoints in tree.fs
> Provide "write" function in the disk-label package
> virtio: Implement block write support
> scsi: Add SCSI block write support
> deblocker: Add a 'write' function
> virtio-scsi: Fix descriptor order for SCSI WRITE commands
> board-qemu: Add a possibility to use hvterm input instead of USB keyboard
> Do not try to use virtio-gpu in VGA mode
> virtio: Fix stack comment of virtio-blk-read
> envvar: Do not read default values for /options from the NVRAM anymore
> envvar: Set properties in /options during "(set-defaults)"
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
into staging
Update OpenBIOS images
# gpg: Signature made Tue 28 Feb 2017 22:09:11 GMT
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-signed:
Update OpenBIOS images to 0cd97cc built from submodule.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
git shortlog rel-1.10.1..rel-1.10.2
===================================
Ben Warren (5):
QEMU DMA: Add DMA write capability
romfile-loader: Switch to using named structs
QEMU fw_cfg: Add command to write back address of file
QEMU fw_cfg: Add functions for accessing files by key
QEMU fw_cfg: Write fw_cfg back on S3 resume
Kevin O'Connor (1):
ps2port: Disable keyboard/mouse prior to resetting ps2 controller
Ladi Prosek (1):
ahci: Set upper 32-bit registers to zero
Paul Menzel (1):
vgasrc: Increase debug level
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
git shortlog rel-1.10.0..rel-1.10.1
===================================
Igor Mammedov (1):
drop "etc/boot-cpus" fw_cfg file and reuse legacy QEMU_CFG_NB_CPUS
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Richard Henderson <rth@twiddle.net>
|
|
git shortlog 04186319..b991c67c
===============================
Laszlo Ersek (3):
[efi] Install the HII config access protocol on a child of the SNP handle
[librm] Conditionalize the workaround for the Tivoli VMM's SSE garbling
[build] Disable TIVOLI_VMM_WORKAROUND in the qemu configuration
Lukas Grossar (1):
[intel] Add PCI device ID for I219-V/LM
Michael Brown (57):
[efi] Fix uninitialised data in HII IFR structures
[bios] Do not enable interrupts when printing to the console
[pxe] Disable interrupts on the PIC before starting NBP
[dhcp] Allow for variable encapsulation of architecture-specific options
[dhcpv6] Include RFC5970 client architecture options in DHCPv6 requests
[dhcpv6] Include vendor class identifier option in DHCPv6 requests
[dhcp] Automatically generate vendor class identifier string
[xfer] Send intf_close() if redirection fails
[downloader] Treat redirection failures as fatal
[iscsi] Treat redirection failures as fatal
[debug] Allow per-object runtime enabling/disabling of debug messages
[debug] Allow debug messages to be initially disabled at runtime
[libc] Allow assertions to be globally enabled or disabled
[profile] Allow profiling to be globally enabled or disabled
[rng] Check for functioning RTC interrupt
[acpi] Add support for ACPI power off
[acpi] Allow time for ACPI power off to take effect
[ipv4] Send gratuitous ARPs whenever a new IPv4 address is applied
[intel] Strip spurious VLAN tags received by virtual function NICs
[intel] Remove duplicate intelvf_mbox_queues() function
[ipv6] Perform SLAAC only during autoconfiguration
[settings] Create space for IPv6 in settings display order
[ipv6] Rename ipv6_scope to dhcpv6_scope
[settings] Correctly mortalise autovivified child settings blocks
[ipv6] Allow settings to comprise arbitrary subsets of NDP options
[ipv6] Expose IPv6 settings acquired through NDP
[dhcpv6] Expose IPv6 address setting acquired through DHCPv6
[ipv6] Expose IPv6 link-local address settings
[settings] Allow settings blocks to specify a sibling ordering
[ipv6] Match user expectations for IPv6 settings priorities
[ipv6] Create routing table based on IPv6 settings
[ipv6] Rename ipv6_scope to ipv6_settings_scope
[test] Update IPv6 tests to use okx()
[ipv6] Allow for multiple routers
[hyperv] Use instance UUID in device name
[crypto] Remove obsolete extern declaration for asn1_invalidate_cursor()
[crypto] Allow for parsing of partial ASN.1 cursors
[image] Add image_asn1() to extract ASN.1 objects from image
[crypto] Add DER image format
[crypto] Add PEM image format
[image] Use image_asn1() to extract data from CMS signature images
[build] Remove obsolete explicit object requirements
[crypto] Enable both DER and PEM formats by default
[build] Remove more obsolete explicit object requirements
[pixbuf] Enable PNG format by default
[crypto] Add image_x509() to extract X.509 certificates from image
[crypto] Generalise X.509 "valid" field to a "flags" field
[list] Add list_next_entry() and list_prev_entry()
[crypto] Expose certstore_del() to explicitly remove stored certificates
[crypto] Allow certificates to be marked as having been added explicitly
[crypto] Add certstat() to display basic certificate information
[cmdline] Add certificate management commands
[crypto] Mark permanent certificates as permanent
[efi] Mark AppleNetBoot.h as a native iPXE header
[efi] Update to current EDK2 headers
[efi] Add EFI_BLOCK_IO2_PROTOCOL header and GUID definition
[bzimage] Fix page alignment of initrd images
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
into staging
ppc patch queue 2016-10-28
This pull request supersedes and extends the one from 2016-10-26
(which had a build bug).
Highlights:
* SLOF (pseries guest firmware) update
* Enable a number of extra testcases on ppc / pseries
* Added the 'powernv' machine type
- Almost enough to be minimally usable
- But still missing necessary interrupt controller updates
* Cleanup and consolidation of NVRAM handling on several platforms
with related firmware
* Substantial cleanup to device tree construction
* Some more POWER9 instruction emulation
* Cleanup to handling of pseries option vectors and CAS reboot
handling (host/guest feature negotiation mechanism)
* Significant cleanups to handling of PCI devices in test cases
* New hotplug event infrastructure
* Memory hot unplug support for pseries
* Several bug fixes
The NVRAM cleanup affects some Sun sparc platforms as well as ppc
ones, but have been tested by the sparc maintainer (Mark Cave-Ayland).
The test additions also include substantial general changes to the
test framework that aren't strictly ppc related. They don't seem to
break tests on other platforms, they're for the benefit of enabling
tests on ppc and there isn't a specific maintainer for them, so
they're included in this tree.
# gpg: Signature made Fri 28 Oct 2016 02:37:19 BST
# gpg: using RSA key 0x6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>"
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.8-20161028: (73 commits)
ppc: allow certain HV interrupts to be delivered to guests
spapr: Memory hot-unplug support
spapr: use count+index for memory hotplug
spapr: Add DRC count indexed hotplug identifier type
spapr: add hotplug interrupt machine options
spapr_events: add support for dedicated hotplug event source
spapr: update spapr hotplug documentation
target-ppc: Add xvcmpnesp, xvcmpnedp instructions
target-ppc: add xscmp[eq,gt,ge,ne]dp instructions
tests: Add pseries machine to the prom-env-test, too
spapr_nvram: Pre-initialize the NVRAM to support the -prom-env parameter
libqos: Change PCI accessors to take opaque BAR handle
tests: Don't assume structure of PCI IO base in ahci-test
tests: Use qpci_mem{read,write} in ivshmem-test
libqos: Add 64-bit PCI IO accessors
tests: Clean up IO handling in ide-test
libqos: Implement mmio accessors in terms of mem{read,write}
libqos: Add streaming accessors for PCI MMIO
tests: Adjust tco-test to use qpci_legacy_iomap()
libqos: Better handling of PCI legacy IO
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
