aboutsummaryrefslogtreecommitdiff
path: root/replay
AgeCommit message (Collapse)Author
2019-10-14replay: add BH oneshot event for block layerPavel Dovgalyuk
Replay is capable of recording normal BH events, but sometimes there are single use callbacks scheduled with aio_bh_schedule_oneshot function. This patch enables recording and replaying such callbacks. Block layer uses these events for calling the completion function. Replaying these calls makes the execution deterministic. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Acked-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-10-14replay: finish record/replay before closing the disksPavel Dovgalyuk
After recent updates block devices cannot be closed on qemu exit. This happens due to the block request polling when replay is not finished. Therefore now we stop execution recording before closing the block devices. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-08-21Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/audio-20190821-pull-request' into staging audio: second batch of -audiodev support, adding support for multiple backends. # gpg: Signature made Wed 21 Aug 2019 09:40:37 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20190821-pull-request: audio: fix memory leak reported by ASAN audio: use size_t where makes sense audio: remove read and write pcm_ops paaudio: fix playback glitches audio: do not run each backend in audio_run audio: remove audio_MIN, audio_MAX paaudio: properly disconnect streams in fini_* paaudio: do not move stream when sink/source name is specified audio: audiodev= parameters no longer optional when -audiodev present paaudio: prepare for multiple audiodev audio: add audiodev properties to frontends audio: add audiodev property to vnc and wav_capture audio: basic support for multi backend audio audio: reduce glob_audio_state usage audio: Add missing fall through comments Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-08-21audio: use size_t where makes senseKővágó, Zoltán
Signed-off-by: Kővágó, Zoltán <DirtY.iCE.hu@gmail.com> Message-id: c5193e687fc6cc0f60cb3e90fe69ddf2027d0df1.1566168923.git.DirtY.iCE.hu@gmail.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2019-08-20replay: rename step-related variables and functionsPavel Dovgalyuk
This patch renames replay_get_current_step() and related variables to make these names consistent with existing 'icount' command line option and future record/replay hmp/qmp commands. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404428377.18669.15476429889039912070.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20replay: refine replay-time modulePavel Dovgalyuk
This patch removes refactoring artifacts from the replay/replay-time.c Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404427799.18669.8072341590511911277.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20replay: fix replay shutdownPavel Dovgalyuk
This patch fixes shutdown of the replay process, which is terminated with the assert when shutdown event is read from the log. replay_finish_event reads new data_kind and therefore the value of data_kind should be preserved to be valid at qemu_system_shutdown_request call. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404427238.18669.12378772823692338069.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20replay: add missing fix for internal functionPavel Dovgalyuk
This is a fix which was missed by patch 74c0b816adfc6aa1b01b4426fdf385e32e35cbac, which added current_step parameter to the replay_advance_current_step function. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <156404425561.18669.13015037579222450241.stgit@pasha-Precision-3630-Tower> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-20replay: Remove host_clock_lastDr. David Alan Gilbert
Now we're not using the 'last' field in the timer, remove it from replay. Bump the version number of the replay structure since we've removed the field. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190724115823.4199-4-dgilbert@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-16sysemu: Split sysemu/runstate.h off sysemu/sysemu.hMarkus Armbruster
sysemu/sysemu.h is a rather unfocused dumping ground for stuff related to the system-emulator. Evidence: * It's included widely: in my "build everything" tree, changing sysemu/sysemu.h still triggers a recompile of some 1100 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h, down from 5400 due to the previous two commits). * It pulls in more than a dozen additional headers. Split stuff related to run state management into its own header sysemu/runstate.h. Touching sysemu/sysemu.h now recompiles some 850 objects. qemu/uuid.h also drops from 1100 to 850, and qapi/qapi-types-run-state.h from 4400 to 4200. Touching new sysemu/runstate.h recompiles some 500 objects. Since I'm touching MAINTAINERS to add sysemu/runstate.h anyway, also add qemu/main-loop.h. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-30-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> [Unbreak OS-X build]
2019-08-16Clean up inclusion of sysemu/sysemu.hMarkus Armbruster
In my "build everything" tree, changing sysemu/sysemu.h triggers a recompile of some 5400 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). Almost a third of its inclusions are actually superfluous. Delete them. Downgrade two more to qapi/qapi-types-run-state.h, and move one from char/serial.h to char/serial.c. hw/semihosting/config.c, monitor/monitor.c, qdev-monitor.c, and stubs/semihost.c define variables declared in sysemu/sysemu.h without including it. The compiler is cool with that, but include it anyway. This doesn't reduce actual use much, as it's still included into widely included headers. The next commit will tackle that. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20190812052359.30071-27-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
2019-08-16Include qemu/main-loop.h lessMarkus Armbruster
In my "build everything" tree, changing qemu/main-loop.h triggers a recompile of some 5600 out of 6600 objects (not counting tests and objects that don't depend on qemu/osdep.h). It includes block/aio.h, which in turn includes qemu/event_notifier.h, qemu/notify.h, qemu/processor.h, qemu/qsp.h, qemu/queue.h, qemu/thread-posix.h, qemu/thread.h, qemu/timer.h, and a few more. Include qemu/main-loop.h only where it's needed. Touching it now recompiles only some 1700 objects. For block/aio.h and qemu/event_notifier.h, these numbers drop from 5600 to 2800. For the others, they shrink only slightly. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190812052359.30071-21-armbru@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2018-11-08replay: Exit on errors reading from replay logPeter Maydell
Currently replay_get_byte() does not check for an error from getc(). Coverity points out (CID 1390622) that this could result in unexpected behaviour (such as looping forever, if we use the replay_get_dword() return value for a loop count). We don't expect reads from the replay log to fail, and if they do there is no way we can continue. So make them fatal errors. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-id: 20181106153330.5139-1-peter.maydell@linaro.org
2018-10-19replay: pass raw icount value to replay_save_clockPaolo Bonzini
This avoids lock recursion when REPLAY_CLOCK is called inside the timers spinlock. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-19replay: don't process events at virtual clock checkpointPavel Dovgalyuk
As QEMU becomes more multi-threaded and non-synchronized, checkpoints move from thread to thread. And the event queue that processed at checkpoints should belong to the same thread in both record and replay executions. This patch disables asynchronous event processing at virtual clock checkpoint, because it may be invoked in different threads at record and replay. This patch is temporary fix until the checkpoints are completely refactored. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20181018063345.7433.11678.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02replay: allow loading any snapshots before recordingPavel Dovgalyuk
This patch enables using -loadvm in recording mode to allow starting the execution recording from any of the available snapshots. It also fixes loading of the record/replay state, therefore snapshots created in replay mode may also be used for starting the new recording. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180912081939.3228.56131.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02replay: flush events when exitingPavel Dovgalyuk
This patch adds events processing when emulation finishes instead of just cleaning the queue. Now the bdrv coroutines will be in consistent state when emulator closes. It allows correct polling of the block layer at exit. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180912081859.3228.79735.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-10-02replay: wake up vCPU when replayingPavel Dovgalyuk
In record/replay icount mode vCPU thread and iothread synchronize the execution using the checkpoints. vCPU thread processes the virtual timers and iothread processes all others. When iothread wants to wake up sleeping vCPU thread, it sends dummy queued work. Therefore it could be the following sequence of the events in record mode: - IO: sending dummy work - IO: processing timers - CPU: wakeup - CPU: clearing dummy work - CPU: processing virtual timers But due to the races in replay mode the sequence may change: - IO: sending dummy work - CPU: wakeup - CPU: clearing dummy work - CPU: sleeping again because nothing to do - IO: Processing timers - CPU: zzzz In this case vCPU will not wake up, because dummy work is not to be set up again. This patch tries to wake up the vCPU when it sleeps and the icount warp checkpoint isn't met. It means that vCPU has something to do, because there are no other reasons of non-matching warp checkpoint. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> -- v5: improve checking that vCPU is still sleeping Message-Id: <20180912081945.3228.19776.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-09-25trivial: Make bios files and source files non-executableThomas Huth
These files can not be executed on the host, so they should not be marked as executable. Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2018-03-12replay: save vmstate of the asynchronous eventsPavel Dovgalyuk
This patch fixes saving and loading the snapshots in the replay mode. It is required for the snapshots created in the moment when the header of the asynchronous event is read. This information was not saved in the snapshot. After loading the vmstate replay continued with the file offset passed the event header. The event header is lost in this case and replay hangs. Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru> Message-Id: <20180227095322.1060.53929.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12replay: don't process async events when warping the clockPavel Dovgalyuk
Virtual clock is warped from iothread and vcpu thread. When the hardware events associated with warp checkpoint, then interrupt delivering may be non-deterministic if checkpoint is processed in different threads in record and replay. This patch disables event processing for clock warp checkpoint and leaves all hardware events to other checkpoints (e.g., virtual clock). Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095316.1060.4134.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12replay: avoid recursive call of checkpointsPavel Dovgalyuk
This patch adds a flag which denies recursive call of replay_checkpoint function. Checkpoints may be accompanied by the hardware events. When event is processed, virtual device may invoke timer modification functions that also invoke the checkpoint function. This leads to infinite loop. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095305.1060.56463.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12replay: check return values of fwritePavel Dovgalyuk
This patch adds error reporting when fwrite cannot completely save the buffer to the file. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095259.1060.86410.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12replay: push replay_mutex_lock up the call treeAlex Bennée
Now instead of using the replay_lock to guard the output of the log we now use it to protect the whole execution section. This replaces what the BQL used to do when it was held during TCG execution. We also introduce some rules for locking order - mainly that you cannot take the replay_mutex while holding the BQL. This leads to some slight sophistry during start-up and extending the replay_mutex_destroy function to unlock the mutex without checking for the BQL condition so it can be cleanly dropped in the non-replay case. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095248.1060.40374.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2018-03-12replay: don't destroy mutex at exitPavel Dovgalyuk
Replay mutex is held by vCPU thread and destroy function is called from atexit of the main thread. Therefore we cannot destroy it safely. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180227095254.1060.96971.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12replay: make locking visible outside replay codeAlex Bennée
The replay_mutex_lock/unlock/locked functions are now going to be used for ensuring lock-step behaviour between the two threads. Make them public API functions and also provide stubs for non-QEMU builds on common paths. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095242.1060.16601.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12replay/replay-internal.c: track holding of replay_lockAlex Bennée
This is modelled after the iothread mutex lock. We keep a TLS flag to indicate when that thread has acquired the lock and assert we don't double-lock or release when we shouldn't have. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095237.1060.44661.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12replay/replay.c: bump REPLAY_VERSION againAlex Bennée
This time commit 802f045a5f61b781df55e4492d896b4d20503ba7 broke the replay file format. Also add a comment about this to replay-internal.h. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180227095231.1060.91180.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-12replay: save prior value of the host clockPavel Dovgalyuk
This patch adds saving/restoring of the host clock field 'last'. It is used in host clock calculation and therefore clock may become incorrect when using restored vmstate. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180227095226.1060.50975.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12replay: fix save/load vm for non-empty queuePavel Dovgalyuk
This patch does not allows saving/loading vmstate when replay events queue is not empty. There is no reliable way to save events queue, because it describes internal coroutine state. Therefore saving and loading operations should be deferred to another record/replay step. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20180227095214.1060.32939.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12replay: fixed replay_enable_eventsPavel Dovgalyuk
This patch fixes assignment to internal events_enabled variable. Now it is set only in record/replay mode. This affects the behavior of the external functions that check this flag. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180227095209.1060.45884.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-12replay: fix processing async eventsPavel Dovgalyuk
Asynchronous events saved at checkpoints may invoke callbacks when processed. These callbacks may also generate/read new events (e.g. clock reads). Therefore event processing flag must be reset before callback invocation. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180227095203.1060.70831.stgit@pasha-VirtualBox> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
2018-03-02Include less of the generated modular QAPI headersMarkus Armbruster
In my "build everything" tree, a change to the types in qapi-schema.json triggers a recompile of about 4800 out of 5100 objects. The previous commit split up qmp-commands.h, qmp-event.h, qmp-visit.h, qapi-types.h. Each of these headers still includes all its shards. Reduce compile time by including just the shards we actually need. To illustrate the benefits: adding a type to qapi/migration.json now recompiles some 2300 instead of 4800 objects. The next commit will improve it further. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180211093607.27351-24-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> [eblake: rebase to master] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-02-09Move include qemu/option.h from qemu-common.h to actual usersMarkus Armbruster
qemu-common.h includes qemu/option.h, but most places that include the former don't actually need the latter. Drop the include, and add it to the places that actually need it. While there, drop superfluous includes of both headers, and separate #include from file comment with a blank line. This cleanup makes the number of objects depending on qemu/option.h drop from 4545 (out of 4743) to 284 in my "build everything" tree. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-20-armbru@redhat.com> [Semantic conflict with commit bdd6a90a9e in block/nvme.c resolved]
2018-02-09Include qapi/error.h exactly where neededMarkus Armbruster
This cleanup makes the number of objects depending on qapi/error.h drop from 1910 (out of 4743) to 1612 in my "build everything" tree. While there, separate #include from file comment with a blank line, and drop a useless comment on why qemu/osdep.h is included first. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20180201111846.21846-5-armbru@redhat.com> [Semantic conflict with commit 34e304e975 resolved, OSX breakage fixed]
2017-09-27migration: pre_save return intDr. David Alan Gilbert
Modify the pre_save method on VMStateDescription to return an int rather than void so that it potentially can fail. Changed zillions of devices to make them return 0; the only case I've made it return non-0 is hw/intc/s390_flic_kvm.c that already had an error_report/return case. Note: If you add an error exit in your pre_save you must emit an error_report to say why. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20170925112917.21340-2-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-06-05Merge remote-tracking branch 'remotes/elmarco/tags/chrfe-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Fri 02 Jun 2017 20:12:48 BST # gpg: using RSA key 0xDAE8E10975969CE5 # gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" # gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5 * remotes/elmarco/tags/chrfe-pull-request: char: move char devices to chardev/ char: make chr_fe_deinit() optionaly delete backend char: rename functions that are not part of fe char: move CharBackend handling in char-fe unit char: generalize qemu_chr_write_all() be-hci: use backend functions chardev: serial & parallel declaration to own headers chardev: move headers to include/chardev Remove/replace sysemu/char.h inclusion char-win: close file handle except with console char-win: rename hcom->file char-win: rename win_chr_init/poll win_chr_serial_init/poll char-win: remove WinChardev.len char-win: simplify win_chr_read() char: cast ARRAY_SIZE() as signed to silent warning on empty array Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2017-06-02chardev: move headers to include/chardevMarc-André Lureau
So they are all in one place. The following patch will move serial & parallel declarations to the respective headers. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2017-06-01migration: Create include for migration snapshotsJuan Quintela
Start removing migration code from sysemu/sysemu.h. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-23shutdown: Add source information to SHUTDOWN and RESETEric Blake
Time to wire up all the call sites that request a shutdown or reset to use the enum added in the previous patch. It would have been less churn to keep the common case with no arguments as meaning guest-triggered, and only modified the host-triggered code paths, via a wrapper function, but then we'd still have to audit that I didn't miss any host-triggered spots; changing the signature forces us to double-check that I correctly categorized all callers. Since command line options can change whether a guest reset request causes an actual reset vs. a shutdown, it's easy to also add the information to reset requests. Signed-off-by: Eric Blake <eblake@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> [ppc parts] Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> [SPARC part] Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> [s390x parts] Message-Id: <20170515214114.15442-5-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-23shutdown: Preserve shutdown cause through replayEric Blake
With the recent addition of ShutdownCause, we want to be able to pass a cause through any shutdown request, and then faithfully replay that cause when later replaying the same sequence. The easiest way is to expand the reply event mechanism to track a series of values for EVENT_SHUTDOWN, one corresponding to each value of ShutdownCause. We are free to change the replay stream as needed, since there are already no guarantees about being able to use a replay stream by any other version of qemu than the one that generated it. The cause is not actually fed back until the next patch changes the signature for requesting a shutdown; a TODO marks that upcoming change. Yes, this uses the gcc/clang extension of a ranged case label, but this is not the first time we've used non-C99 constructs. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170515214114.15442-4-eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2017-05-17migration: Pass Error ** argument to {save,load}_vmstateJuan Quintela
This way we use the "normal" way of printing errors for hmp commands. Signed-off-by: Juan Quintela <quintela@redhat.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com>
2017-05-04monitor: Remove monitor parameter from save_vmstateJuan Quintela
load_vmstate() already use error_report, so be consistent. There is an identical error message in load_vmstate() that ends in a period. Remove it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-04-10replay: assert time only goes forwardAlex Bennée
If we find ourselves trying to add an event to the log where time has gone backwards it is because a vCPU event has occurred and the main-loop is not yet aware of time moving forward. This should not happen and if it does its better to fail early than generate a log that will have weird behaviour. Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2017-03-28replay/replay.c: bump REPLAY_VERSIONAlex Bennée
A previous commit (3d4d16f4) added support for audio record/playback. However this breaks the logfile ABI due to the re-ordering of the ReplayEvents enum. The REPLAY_VERSION check is meant to prevent you from using old log files in newer QEMUs but this is currently broken. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-14qemu-timer: do not include sysemu/cpus.h from util/qemu-timer.hPaolo Bonzini
This dependency is the wrong way, and we will need util/qemu-timer.h from sysemu/cpus.h in the next patch. Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-01replay: add record/replay for audio passthroughPavel Dovgalyuk
This patch adds recording and replaying audio data. Is saves synchronization information for audio out and inputs from the microphone. v2: removed unneeded whitespace change Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-id: 20170202055054.4848.94901.stgit@PASHA-ISP.lan02.inno [ kraxel: add qemu/error-report.h include to fix osx build failure ] Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-01-27char: rename CharDriverState ChardevMarc-André Lureau
Pick a uniform chardev type name. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-01-27replay: save/load initial statePavel Dovgalyuk
This patch implements initial vmstate creation or loading at the start of record/replay. It is needed for rewinding the execution in the replay mode. v4 changes: - snapshots are not created by default anymore v3 changes: - added rrsnapshot option Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Message-Id: <20170124071746.4572.61449.stgit@PASHA-ISP> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 09:52:41 +0000