| Age | Commit message (Collapse) | Author |
|---|
|
Introduce a "xen-load-devices-state" QAPI command that can be used to
load the state of all devices, but not the RAM or the block devices of
the VM.
We only have hmp commands savevm/loadvm, and qmp commands
xen-save-devices-state.
We use this new command for COLO:
1. suspend both primary vm and secondary vm
2. sync the state
3. resume both primary vm and secondary vm
In such case, we need to update all devices' state in any time.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
|
|
The new autoconverge throttling commands have been tested for a release now. It
is time to move them out of the experimental state.
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Message-Id: <1461262038-8197-1-git-send-email-jjherne@linux.vnet.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
The new QMP command name is x-blockdev-change. It's just for adding/removing
quorum's child now, and doesn't support all kinds of children, all kinds of
operations, nor all block drivers. So it is experimental now.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Message-id: 1462865799-19402-4-git-send-email-xiecl.fnst@cn.fujitsu.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
This patch add "query-gic-capabilities" but does not implement it. The
command is ARM-only. The command will return a list of GICCapability
structs that describes all GIC versions that current QEMU and system
support.
Libvirt is possibly the first consumer of this new command.
Before this patch, a libvirt user can successfully configure all kinds
of GIC devices for ARM guests, no matter whether current QEMU/kernel
supports them. If the specified GIC version/type is not supported, the
user will get an ambiguous "QEMU boot failure" error when trying to start
the VM. This is not user-friendly.
With this patch, libvirt should be able to query which type (and which
version) of GIC device is supported. Using this information, libvirt
can warn the user during configuration of guests when specified GIC
device type is not supported. Or better, we can just list those versions
that we support, and filter out the unsupported ones.
For example, if we got the query result:
{"return": [{"emulated": false, "version": 3, "kernel": true},
{"emulated": true, "version": 2, "kernel": false}]}
then it means that we support emulated GIC version 2 using:
qemu-system-aarch64 -M virt,accel=tcg,gic-version=2 ...
or KVM-accelerated GIC version 3 using:
qemu-system-aarch64 -M virt,accel=kvm,gic-version=3 ...
If we specify other explicit GIC versions rather than the above, QEMU
will not be able to boot.
The community is working on a more generic way to query these kinds of
information about valid values of machine properties. However, due to
the importance of supporting this specific use case, weecided to first
implement this ad-hoc one; then when the generic method is ready, we
can move on to that one smoothly.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1458788142-17509-2-git-send-email-peterx@redhat.com
[PMM: tweaked commit message a bit; monitor.o is CONFIG_SOFTMMU only]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Postcopy seems to have survived a cycle with only a few fixes,
and Jiri has the current libvirt wired up and working
( https://www.redhat.com/archives/libvir-list/2016-March/msg00080.html )
so remove the experimental tag.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <1457690016-9070-3-git-send-email-dgilbert@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
With all fixups being in place now, we can promote input-send-event
to stable abi by removing the x- prefix.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Lowercase them.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
All lowercase, use-dash instead of CamelCase.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Use display device qdev id and head number instead of console index to
specify the QemuConsole. This makes things consistent with input
devices (for input routing) and vnc server configuration, which both use
display and head too.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
|
|
* Asynchronous dump-guest-memory from Peter
* improved logging with -D -daemonize from Dimitris
* more address_space_* optimization from Gonglei
* TCG xsave/xrstor thinko fix
* chardev bugfix and documentation patch
# gpg: Signature made Thu 25 Feb 2016 15:12:27 GMT using RSA key ID 78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
* remotes/bonzini/tags/for-upstream:
target-i386: fix confusion in xcr0 bit position vs. mask
chardev: Properly initialize ChardevCommon components
memory: Remove unreachable return statement
memory: optimize qemu_get_ram_ptr and qemu_ram_ptr_length
exec: store RAMBlock pointer into memory region
log: Redirect stderr to logfile if deamonized
dump-guest-memory: add qmp event DUMP_COMPLETED
Dump: add hmp command "info dump"
Dump: add qmp command "query-dump"
DumpState: adding total_size and written_size fields
dump-guest-memory: add "detach" support
dump-guest-memory: disable dump when in INMIGRATE state
dump-guest-memory: introduce dump_process() helper function.
dump-guest-memory: add dump_in_progress() helper function
dump-guest-memory: using static DumpState, add DumpStatus
dump-guest-memory: add "detach" flag for QMP/HMP interfaces.
dump-guest-memory: cleanup: removing dump_{error|cleanup}().
scripts/kvm/kvm_stat: Fix missing right parantheses and ".format(...)"
qemu-options.hx: Improve documentation of chardev multiplexing mode
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When dump-guest-memory is requested with detach flag, after its
return, user could query its status using "query-dump" command (with
no argument). The result contains:
- status: current dump status
- completed: bytes written in the latest dump
- total: bytes to write in the latest dump
From completed and total, we could know how much work
finished by calculating:
100.0 * completed / total (%)
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <1455772616-8668-10-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch only adds the interfaces, but does not implement them.
"detach" parameter is made optional, to make sure that all the old
dump-guest-memory requests will still be able to work.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Message-Id: <1455772616-8668-3-git-send-email-peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch adds the new bps_*_max_length and iops_*_max_length
parameters to the block_set_io_throttle command.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This modifies the nbd-server-start QMP command so that it
is possible to request use of TLS. This is done by adding
a new optional parameter "tls-creds" which provides the ID
of a previously created QCryptoTLSCreds object instance.
TLS is only supported when using an IPv4/IPv6 socket listener.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1455129674-17255-17-git-send-email-berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the missing descriptions for the options of migration capability commands,
and fix the example for query-migrate-capabilities command.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-7-git-send-email-zhang.zhanghailiang@huawei.com>
[Amit: Strip whitespace]
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
We didn't document x-cpu-throttle-initial/x-cpu-throttle-increment for
commands migrate-set-parameters and query-migrate-parameters.
Here we add the descriptions for these two options and fix the wrong example
for query-migrate-parameters qmp commands.
Besides, this will also fix the bug that we can't set x-cpu-throttle-initial
and x-cpu-throttle-increment through migrate-set-parameters qmp command.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-Id: <1452829066-9764-6-git-send-email-zhang.zhanghailiang@huawei.com>
[Amit: fix typo in 'auto-converge']
Signed-off-by: Amit Shah <amit.shah@redhat.com>
|
|
This will start a mirror job from a named device to another named
device, its relation with drive-mirror is similar with blockdev-backup
to drive-backup.
In blockdev-mirror, the target node should be prepared by blockdev-add,
which will be responsible for assigning a name to the new node, so
we don't have 'node-name' parameter.
Signed-off-by: Fam Zheng <famz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1450932306-13717-5-git-send-email-famz@redhat.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
The CpuInfo struct is used only by the 'query-cpus' output
command, so we are free to modify it by adding fields (clients
are already supposed to ignore unknown output fields), or by
changing optional members to mandatory, while still keeping
QMP wire compatibility with older versions of qemu.
When qapi type CpuInfo was originally created for 0.14, we had
no notion of a flat union, and instead just listed a bunch of
optional fields with documentation about the mutually-exclusive
choice of which instruction pointer field(s) would be provided
for a given architecture. But now that we have flat unions and
introspection, it is better to segregate off which fields will
be provided according to the actual architecture. With this in
place, we no longer need the fields to be optional, because the
choice of the new 'arch' discriminator serves that role.
This has an additional benefit: the old all-in-one struct was
the only place in the code base that had a case-sensitive
naming of members 'pc' vs. 'PC'. Separating these spellings
into different branches of the flat union will allow us to add
restrictions against future case-insensitive collisions, since
that is generally a poor interface practice.
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <1447836791-369-25-git-send-email-eblake@redhat.com>
[Spelling of CPUInfo{SPARC,PPC,MIPS} fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
While in the long term we want throttling to be its own block filter
BDS, in the short term we want it to be part of the BB instead of a BDS;
even in the long term we may want legacy throttling to be automatically
tied to the BB.
blockdev-insert-medium and blockdev-remove-medium do not retain
throttling information in the BB (deliberately so). Therefore, using
them means tying this information to a BDS, which would break the model
described above. (The same applies to other flags such as
detect_zeroes.) We probably want to move this information to the BB or
its own filter BDS before blockdev-{insert,remove}-medium can be
considered completely stable.
Therefore, mark these functions experimental for the time being.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Message-id: 1449847385-13986-2-git-send-email-mreitz@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
[PMM: fixed format nit (underlining) in qmp-commands.hx]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
This patch adds two new fields to BlockDeviceTimedStats that track the
average number of pending read and write requests for a block device.
The values are calculated for the period of time defined for that
interval.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: fd31fef53e2714f2f30d59ed58ca2f67ec9ab926.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch keeps track of the minimum, maximum and average latencies
of I/O operations during a certain interval of time.
The values are exposed in the BlockDeviceTimedStats structure.
An option to define the intervals to collect these statistics will be
added in a separate patch.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: c7382dc89622c64f918d09f32815827772628f8e.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds two options, "stats-account-invalid" and
"stats-account-failed", that can be used to decide whether invalid and
failed I/O operations must be used when collecting statistics for
latency and last access time.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: ebc7e5966511a342cad428a392c5f5ad56b15213.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds the block_acct_failed() and block_acct_invalid()
functions to allow keeping track of failed and invalid I/O operations.
The number of failed and invalid operations is exposed in
BlockDeviceStats.
We don't keep track of the time spent on invalid operations because
they are cancelled immediately when they are started.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: a7256ccb883a86356b1c6c46b5a29ed5448546a5.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This patch adds the new field 'idle_time_ns' to the BlockDeviceStats
structure, indicating the time that has passed since the previous I/O
operation.
It also adds the block_acct_idle_time_ns() call, to ensure that all
references to the clock type used for accounting are in the same
place. This will later allow us to use a different clock for iotests.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Message-id: 7d8cfcf931453e1a2443e6626e8c1edc347c7c8a.1446044837.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add both transactional properties to the QMP transactional interface,
and add the BlockJobTxn that we create as a result of the err-cancel
property to the BlkActionState structure.
[split up from a patch originally by Stefan and Fam. --js]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1446765200-3054-13-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
This command is still experimental, hence the name.
This is the companion to 'blockdev-add'. It allows deleting a
BlockBackend with its associated BlockDriverState tree, or a
BlockDriverState that is not attached to any backend.
In either case, the command fails if the reference count is greater
than 1 or the BlockDriverState has any parents.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 6cfc148c77aca1da942b094d811bfa3fcf7ac7bb.1446475331.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
|
|
One of the limitations of the 'blockdev-snapshot-sync' command is that
it does not allow passing BlockdevOptions to the newly created
snapshots, so they are always opened using the default values.
Extending the command to allow passing options is not a practical
solution because there is overlap between those options and some of
the existing parameters of the command.
This patch introduces a new 'blockdev-snapshot' command with a simpler
interface: it just takes two references to existing block devices that
will be used as the source and target for the snapshot.
Since the main difference between the two commands is that one of them
creates and opens the target image, while the other uses an already
opened one, the bulk of the implementation is shared.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Add an option to qmp_blockdev_change_medium() which allows changing the
read-only status of the block device whose medium is changed.
Some drives do not have a inherently fixed read-only status; for
instance, floppy disks can be set read-only or writable independently of
the drive. Some users may find it useful to be able to therefore change
the read-only status of a block device when changing the medium.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Introduce a new QMP command 'blockdev-change-medium' which is intended
to replace the 'change' command for block devices. The existing function
qmp_change_blockdev() is accordingly renamed to
qmp_blockdev_change_medium().
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
And a helper function for that, which directly takes a pointer to the
BDS to be inserted instead of its node-name (which will be used for
implementing 'change' using blockdev-insert-medium).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Once postcopy is enabled (with migrate_set_capability), the migration
will still start on precopy mode. To cause a transition into postcopy
the:
migrate_start_postcopy
command must be issued. Postcopy will start sometime after this
(when it's next checked in the migration loop).
Issuing the command before migration has started will error,
and issuing after it has finished is ignored.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
BlockAcctStats contains statistics about the data transferred from and
to the device; wr_highest_sector does not fit in with the rest.
Furthermore, those statistics are supposed to be specific for a certain
device and not necessarily for a BDS (see the comment above
bdrv_get_stats()); on the other hand, wr_highest_sector may be a rather
important information to know for each BDS. When BlockAcctStats is
finally removed from the BDS, we will want to keep wr_highest_sector in
the BDS.
Finally, wr_highest_sector is renamed to wr_highest_offset and given the
appropriate meaning. Externally, it is represented as an offset so there
is no point in doing something different internally. Its definition is
changed to match that in qapi/block-core.json which is "the offset after
the greatest byte written to". Doing so should not cause any harm since
if external programs tried to calculate the volume usage by
(wr_highest_offset + 512) / volume_size, after this patch they will just
assume the volume to be full slightly earlier than before.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Although the canonical source of reference for QMP commands is
qapi-schema.json, for consistency's sake, update qmp-commands.hx to
state the list of supported transactionable operations, namely:
drive-backup
blockdev-backup
blockdev-snapshot-internal-sync
abort
block-dirty-bitmap-add
block-dirty-bitmap-clear
Also update the possible values for the "type" action array.
Signed-off-by: Kashyap Chamarthy <kchamart@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Currently device_del requires that the client provide the
device short ID. device_add allows devices to be created
without giving an ID, at which point there is no way to
delete them with device_del. The QOM object path, however,
provides an alternative way to identify the devices.
Allowing device_del to accept an object path ensures all
devices are deletable regardless of whether they have an
ID.
(qemu) device_add usb-mouse
(qemu) qom-list /machine/peripheral-anon
device[0] (child<usb-mouse>)
type (string)
(qemu) device_del /machine/peripheral-anon/device[0]
Devices are required to be marked as hotpluggable
otherwise an error is raised
(qemu) device_del /machine/unattached/device[4]
Device 'PIIX3' does not support hotplugging
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1441974836-17476-1-git-send-email-berrange@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
[Commit message touched up, accidental white-space change dropped]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
qapi/introspect.json defines the introspection schema. It's designed
for QMP introspection, but should do for similar uses, such as QGA.
The introspection schema does not reflect all the rules and
restrictions that apply to QAPI schemata. A valid QAPI schema has an
introspection value conforming to the introspection schema, but the
converse is not true.
Introspection lowers away a number of schema details, and makes
implicit things explicit:
* The built-in types are declared with their JSON type.
All integer types are mapped to 'int', because how many bits we use
internally is an implementation detail. It could be pressed into
external interface service as very approximate range information,
but that's a bad idea. If we need range information, we better do
it properly.
* Implicit type definitions are made explicit, and given
auto-generated names:
- Array types, named by appending "List" to the name of their
element type, like in generated C.
- The enumeration types implicitly defined by simple union types,
named by appending "Kind" to the name of their simple union type,
like in generated C.
- Types that don't occur in generated C. Their names start with ':'
so they don't clash with the user's names.
* All type references are by name.
* The struct and union types are generalized into an object type.
* Base types are flattened.
* Commands take a single argument and return a single result.
Dictionary argument or list result is an implicit type definition.
The empty object type is used when a command takes no arguments or
produces no results.
The argument is always of object type, but the introspection schema
doesn't reflect that.
The 'gen': false directive is omitted as implementation detail.
The 'success-response' directive is omitted as well for now, even
though it's not an implementation detail, because it's not used by
QMP.
* Events carry a single data value.
Implicit type definition and empty object type use, just like for
commands.
The value is of object type, but the introspection schema doesn't
reflect that.
* Types not used by commands or events are omitted.
Indirect use counts as use.
* Optional members have a default, which can only be null right now
Instead of a mandatory "optional" flag, we have an optional default.
No default means mandatory, default null means optional without
default value. Non-null is available for optional with default
(possible future extension).
* Clients should *not* look up types by name, because type names are
not ABI. Look up the command or event you're interested in, then
follow the references.
TODO Should we hide the type names to eliminate the temptation?
New generator scripts/qapi-introspect.py computes an introspection
value for its input, and generates a C variable holding it.
It can generate awfully long lines. Marked TODO.
A new test-qmp-input-visitor test case feeds its result for both
tests/qapi-schema/qapi-schema-test.json and qapi-schema.json to a
QmpInputVisitor to verify it actually conforms to the schema.
New QMP command query-qmp-schema takes its return value from that
variable. Its reply is some 85KiBytes for me right now.
If this turns out to be too much, we have a couple of options:
* We can use shorter names in the JSON. Not the QMP style.
* Optionally return the sub-schema for commands and events given as
arguments.
Right now qmp_query_schema() sends the string literal computed by
qmp-introspect.py. To compute sub-schema at run time, we'd have to
duplicate parts of qapi-introspect.py in C. Unattractive.
* Let clients cache the output of query-qmp-schema.
It changes only on QEMU upgrades, i.e. rarely. Provide a command
query-qmp-schema-hash. Clients can have a cache indexed by hash,
and re-query the schema only when they don't have it cached. Even
simpler: put the hash in the QMP greeting.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
It doesn't take a 'props' argument, let alone one in the format
"NAME=VALUE,..."
The bogus arguments specification doesn't matter due to 'gen': false.
Clean it up to be incomplete rather than wrong, and document the
incompleteness.
While there, improve netdev_add usage example in the manual: add a
device option to show how it's done.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-24-git-send-email-armbru@redhat.com>
|
|
With the previous commit, the generated marshalers just work, and save
us a bit of handwritten code.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-23-git-send-email-armbru@redhat.com>
|
|
These functions marshal both input and output.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Message-Id: <1442401589-24189-17-git-send-email-armbru@redhat.com>
|
|
Provide a dump-skeys qmp command to allow the end user to dump storage
keys. This is useful for debugging problems with guest storage key support
within Qemu and for guest operating system developers.
Reviewed-by: Thomas Huth <thuth@linux.vnet.ibm.com>
Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Jason J. Herne <jjherne@linux.vnet.ibm.com>
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Reported-by: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
|
|
If specified as "true", it allows discarding on target sectors where source is
not allocated.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
If we wish to make differential backups a feature that's easy to access,
it might be pertinent to rename the "dirty-bitmap" mode to "incremental"
to make it clear what /type/ of backup the dirty-bitmap is helping us
perform.
This is an API breaking change, but 2.4 has not yet gone live,
so we have this flexibility.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-id: 1433463642-21840-2-git-send-email-jsnow@redhat.com
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fixup migrate-incoming text as requested by Eric in:
http://lists.nongnu.org/archive/html/qemu-devel/2015-03/msg03362.html
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
The traditional QMP command handler interface
int qmp_FOO(Monitor *mon, const QDict *params, QObject **ret_data);
doesn't provide for returning an Error object. Instead, the handler
is expected to stash it in the monitor with qerror_report().
When we rebased QMP on top of QAPI, we didn't change this interface.
Instead, commit 776574d introduced "middle mode" as a temporary aid
for converting existing QMP commands to QAPI one by one. More than
three years later, we're still using it.
Middle mode has two effects:
* Instead of the native input marshallers
static void qmp_marshal_input_FOO(QDict *, QObject **, Error **)
it generates input marshallers conforming to the traditional QMP
command handler interface.
* It suppresses generation of code to register them with
qmp_register_command()
This permits giving them internal linkage.
As long as we need qmp-commands.hx, we can't use the registry behind
qmp_register_command(), so the latter has to stay for now.
The former has to go to get rid of qerror_report(). Changing all QMP
commands to fit the QAPI mold in one go was impractical back when we
started, but by now there are just a few stragglers left:
do_qmp_capabilities(), qmp_qom_set(), qmp_qom_get(), qmp_object_add(),
qmp_netdev_add(), do_device_add().
Switch middle mode to generate native input marshallers, and adapt the
stragglers. Simplifies both the monitor code and the stragglers.
Rename do_qmp_capabilities() to qmp_capabilities(), and
do_device_add() to qmp_device_add, because that's how QMP command
handlers are named today.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
staging
# gpg: Signature made Fri Jun 12 15:57:47 2015 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
qemu-iotests: expand test 093 to support group throttling
throttle: Update throttle infrastructure copyright
throttle: add the name of the ThrottleGroup to BlockDeviceInfo
throttle: acquire the ThrottleGroup lock in bdrv_swap()
throttle: Add throttle group support
throttle: Add throttle group infrastructure tests
throttle: Add throttle group infrastructure
throttle: Extract timers from ThrottleState into a separate structure
raw-posix: Fix .bdrv_co_get_block_status() for unaligned image size
Revert "iothread: release iothread around aio_poll"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The throttle group support use a cooperative round robin scheduling
algorithm.
The principles of the algorithm are simple:
- Each BDS of the group is used as a token in a circular way.
- The active BDS computes if a wait must be done and arms the right
timer.
- If a wait must be done the token timer will be armed so the token
will become the next active BDS.
Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: f0082a86f3ac01c46170f7eafe2101a92e8fde39.1433779731.git.berto@igalia.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
