aboutsummaryrefslogtreecommitdiff
path: root/qmp-commands.hx
AgeCommit message (Collapse)Author
2011-12-15qom: qom_{get, set} monitor commands (v2)Anthony Liguori
This allows clients to read and write device model properties through QMP. QAPI doesn't support Visitor types yet and these commands are special in that they don't work with fixed types. I've added a documentation stub to qapi-schema.json so we can keep consistency there. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-15qmp: add qom-list commandAnthony Liguori
This can be used to list properties in the device model. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-12-06qapi: Convert migrate_set_speedLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert migrate_set_downtimeLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert migrate_cancelLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert human-monitor-commandLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert blockdev_snapshot_syncLuiz Capitulino
Unfortunately, this conversion required an additional change. In the old QMP command, the 'snapshot-file' argument is specified as optional. The idea is to take the snapshot internally if 'snapshot-file' is not passed. However, internal snapshots are not supported yet so the command returns a MissingParamater error if 'snapshot-file' is not passed. Which makes the argument actually required and will cause compatibility breakage if we change that in the future. To fix this the QAPI converted blockdev_snapshot_sync command makes the 'snapshot-file' argument required. Again, in practice it's actually required, so this is not incompatible. If we do implement internal snapshots someday, we'll need a new argument for it. Note that this discussion doesn't affect HMP. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert block_resizeLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert balloonLuiz Capitulino
Note that the command being dropped uses the deprecated MONITOR_CMD_ASYNC API, but the new command is a regular synchronous command. There shouldn't be visible differences though, as MONITOR_CMD_ASYNC is internal only. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert block_passwdLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert set_linkLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert inject-nmiLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert contLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert pmemsaveLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Convert memsaveLuiz Capitulino
Please, note that the QMP command has a new 'cpu-index' parameter. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-06qapi: Complete system_powerdown conversionLuiz Capitulino
Commit 5bc465e4b1b6f4582a400c0a7033a1c841744278 converted only the HMP part of the system_powerdown command to the QAPI, this commit completes it by converting the QMP part too. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-12-05hmp/qmp: add block_set_io_throttleZhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-31Merge remote-tracking branch 'qmp/queue/qmp' into stagingAnthony Liguori
Conflicts: ui/spice-core.c
2011-10-27qapi: Convert query-pciLuiz Capitulino
This also fixes a bug with the old version: QMP would invert device id and vendor id. This would look ok on HMP because it was printing "device:vendor" instead of "vendor:device". Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-balloonLuiz Capitulino
Please, note that some of the code supporting memory statistics is still around (eg. virtio_balloon_receive_stats() and reset_stats()). Also, the qmp_query_balloon() function is synchronous and thus doesn't make any use of the (not fully working) monitor's asynchronous command support (the old non-qapi implementation did). Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-spiceLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-vncLuiz Capitulino
There are three important remarks in relation to the non-qapi command: 1. This commit also fixes the behavior of the 'query-vnc' and 'info vnc' commands to return an error when qemu is built without VNC support (ie. --disable-vnc). The non-qapi command would return the OK response in QMP and no response in HMP 2. The qapi version explicitly marks the fields 'host', 'family', 'service' and 'auth' as optional. Their are not documented as optional in the non-qapi command doc, but they would not be returned if vnc support is disabled. The qapi version maintains the same semantics, but documents those fields correctly 3. The 'clients' field, which is a list, is marked as optional but is always returned. If there are no clients connected an empty list is returned. This is not the Right Way to this in the qapi but it's how the non-qapi command used to work Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-blockstatsLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-blockLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-cpusLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert the cpu commandLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-migrateLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-27qapi: Convert query-miceLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-25spice: turn client_migrate_info to asyncYonit Halperin
RHBZ 737921 Spice client is required to connect to the migration target before/as migration starts. Since after migration starts, the target qemu is blocked and cannot accept new spice client we trigger the connection to the target upon client_migrate_info command. client_migrate_info completion cb will be called after spice client has been connected to the target (or a timeout). See following patches and spice patches. Signed-off-by: Yonit Halperin <yhalperi@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-10-19QMP: Fix blockdev-snapshot-sync doc exampleLuiz Capitulino
Fix wrong command name. Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-11QMP: query-status: Add 'io-status' keyLuiz Capitulino
Contains the I/O status for the given device. The key is only present if the device supports it and the VM is configured to stop on errors. Please, check the documentation being added in this commit for more information. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-10-04qapi: Convert system_resetLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert stopLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert quitLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert query-commandsLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert query-chardevLuiz Capitulino
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert query-uuidLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert query-statusLuiz Capitulino
Please, note that the RunState type as defined in sysemu.h and its runstate_as_string() function are being dropped in favor of the RunState type generated by the QAPI. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert query-kvmLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: Convert query-versionLuiz Capitulino
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-10-04qapi: convert query-nameAnthony Liguori
A simple example conversion 'info name'. This also adds the new files for QMP and HMP. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-15QMP: query-status: Introduce 'status' keyLuiz Capitulino
This new key reports the current VM status to clients. Please, check the documentation being added in this commit for more details. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-09-12block: Show whether the virtual tray is open in info blockMarkus Armbruster
Need to ask the device, so this requires new BlockDevOps member is_tray_open(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-26block: latency accountingChristoph Hellwig
Account the total latency for read/write/flush requests. This allows management tools to average it based on a snapshot of the nr ops counters and allow checking for SLAs or provide statistics. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-08-23block: include flush requests in info blockstatsChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-07-27qmp: fix efect -> effect typo in qmp-commands.hxZhi Yong Wu
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2011-07-23Introduce a 'client_add' monitor command accepting an open FDDaniel P. Berrange
Allow client connections for VNC and socket based character devices to be passed in over the monitor using SCM_RIGHTS. One intended usage scenario is to start QEMU with VNC on a UNIX domain socket. An unprivileged user which cannot access the UNIX domain socket, can then connect to QEMU's VNC server by passing an open FD to libvirt, which passes it onto QEMU. { "execute": "get_fd", "arguments": { "fdname": "myclient" } } { "return": {} } { "execute": "add_client", "arguments": { "protocol": "vnc", "fdname": "myclient", "skipauth": true } } { "return": {} } In this case 'protocol' can be 'vnc' or 'spice', or the name of a character device (eg from -chardev id=XXXX) The 'skipauth' parameter can be used to skip any configured VNC authentication scheme, which is useful if the mgmt layer talking to the monitor has already authenticated the client in another way. * console.h: Define 'vnc_display_add_client' method * monitor.c: Implement 'client_add' command * qemu-char.c, qemu-char.h: Add 'qemu_char_add_client' method * qerror.c, qerror.h: Add QERR_ADD_CLIENT_FAILED * qmp-commands.hx: Declare 'client_add' command * ui/vnc.c: Implement 'vnc_display_add_client' method Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2011-07-21QMP: add snapshot-blkdev-sync commandJes Sorensen
Add QMP bits for snapshot_blkdev command. This is the same as snapshot_blkdev in the human monitor. The command is synchronous. In the future async commands and or a break down of the functionality into multiple commands might be added. Also change the 'snapshot_file' argument to 'snapshot-file' in the human monitor, so that it matches QMP. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Luiz Capitulino <lcapitulino@gmail.com>
2011-06-01HMP: Use QMP inject nmi implementationLuiz Capitulino
This **CHANGES** the human monitor "nmi" command behavior. Currently it accepts an CPU argument which, when provided, will send the NMI to the specified CPU. This feature is of discussable value though and HMP shouldn't have more features than QMP, so let's use QMP's instead (it's also simpler). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2011-06-01QMP: add inject-nmi qmp commandLai Jiangshan
inject-nmi command injects an NMI on all CPUs of guest. It is only supported for x86 guest currently, it will returns "Unsupported" error for non-x86 guest. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-15 00:35:53 +0000