aboutsummaryrefslogtreecommitdiff
path: root/qga
AgeCommit message (Collapse)Author
2019-06-12Include qemu-common.h exactly where neededMarkus Armbruster
No header includes qemu-common.h after this commit, as prescribed by qemu-common.h's file comment. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-5-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for include/hw/arm/xlnx-zynqmp.h hw/arm/nrf51_soc.c hw/arm/msf2-soc.c block/qcow2-refcount.c block/qcow2-cluster.c block/qcow2-cache.c target/arm/cpu.h target/lm32/cpu.h target/m68k/cpu.h target/mips/cpu.h target/moxie/cpu.h target/nios2/cpu.h target/openrisc/cpu.h target/riscv/cpu.h target/tilegx/cpu.h target/tricore/cpu.h target/unicore32/cpu.h target/xtensa/cpu.h; bsd-user/main.c and net/tap-bsd.c fixed up]
2019-06-12Include qemu/module.h where needed, drop it from qemu-common.hMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190523143508.25387-4-armbru@redhat.com> [Rebased with conflicts resolved automatically, except for hw/usb/dev-hub.c hw/misc/exynos4210_rng.c hw/misc/bcm2835_rng.c hw/misc/aspeed_scu.c hw/display/virtio-vga.c hw/arm/stm32f205_soc.c; ui/cocoa.m fixed up]
2019-05-13Clean up ill-advised or unusual header guardsMarkus Armbruster
Leading underscores are ill-advised because such identifiers are reserved. Trailing underscores are merely ugly. Strip both. Our header guards commonly end in _H. Normalize the exceptions. Done with scripts/clean-header-guards.pl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190315145123.28030-7-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> [Changes to slirp/ dropped, as we're about to spin it off]
2019-05-07qga: Fix mingw compilation warnings on enum conversionCao Jiaxi
The win2qemu[] is supposed to be the conversion table to convert between STORAGE_BUS_TYPE in Windows SDK and GuestDiskBusType in qga. But it was incorrectly written that it forces to set a GuestDiskBusType value to STORAGE_BUS_TYPE, which generates an enum conversion warning in clang. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Cao Jiaxi <driver1998@foxmail.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20190503003650.10137-1-driver1998@foxmail.com Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-18qga: process_event() simplificationMarc-André Lureau
Simplify the code around qmp_dispatch(): - rely on qmp_dispatch/check_obj() for message checking - have a single send_response() point - constify send_response() argument It changes a couple of error messages: * When @req isn't a dictionary, from Invalid JSON syntax to QMP input must be a JSON object * When @req lacks member "execute", from this feature or command is not currently supported to QMP input lacks member 'execute' CC: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-03-18qga: Fix guest-get-fsinfo PCI address collection in WindowsMatt Hines
The Windows QEMU guest agent erroneously tries to collect PCI information directly from the physical drive. However, windows stores SCSI/IDE information with the drive and PCI information with the underlying storage controller This changes get_pci_info to use the physical drive's underlying storage controller to get PCI information. * Additionally Fixes incorrect size being passed to DeviceIoControl when getting volume extents. Can occasionally crash the guest agent Signed-off-by: Matt Hines <mhines@scalecomputing.com> *fix up some checkpatch warnings *fix domain reporting and add some sanity checks for debug Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18qga-win: fix VSS build breakage due to unintended gnu99 C++ flagMichael Roth
Commit 7be41675f7c set -std=gnu99 for C code via QEMU_CFLAGS. Currently we generate a "custom" QEMU_CXXFLAGS for VSS DLL C++ build by filtering out some options from QEMU_CFLAGS and adding some others. Since we don't filter out -std=gnu99 currently this breaks builds when VSS support is enabled. We could keep the existing approach, filter out -std=gnu99 from QEMU_CFLAGS, and add -std=gnu++98, like configure currently does for QEMU_CXXFLAGS, but as it turns out our resulting QEMU_CXXFLAGS would be exactly what configure already generates, just with these filtered out: -fstack-protector-all -fstack-protector-strong and these added: -Wno-unknown-pragmas -Wno-delete-non-virtual-dtor So fix the issue by re-using configure-generated QEMU_CXXFLAGS and just handling these specific changes. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2019-03-18qga-win: include glib when building VSS DLLMichael Roth
Commit 3ebee3b191e defined assert() as g_assert(), but when we build the VSS DLL component of QGA (to handle fsfreeze) we do not include glib, which results in breakage when building with VSS support enabled. Fix this by including glib (along with the -lintl and -lws2_32 dependencies it brings). Since the VSS DLL is built statically, this introduces an additional dependency on static glib and supporting libs for the mingw environment (possibly why we didn't include glib originally), but VSS support already has very specific prerequisites so it shouldn't affect too many build environments. Since the VSS DLL code does use qemu/osdep.h, this should also help avoid future breakages and possibly allow for some clean ups in current VSS code. Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18qga-win: Adding support for Windows Server 2019 get-osinfo commandBishara AbuHattoum
Since Windows Server 2016, Microsoft stopped upgrading the major and minor versions of their new Windows Server product, so, the current functionality of checking major and minor version numbers to determine the Windows Server version wont work as expected. The implemented solution here is to use the build number in addition to the major and minor version numbers of the product to determine the Windows Server product version. The final build number of Windows Server 2016 is 14939, and the final build number of Windows Server 2019 is 17764, so any Windows Server product that has the major version of 10 and minor version of 0 with a build number lower or equal to 14939 will resemble 2016 and if the build number is lower or equal to 17763 will resemble 2019. Reference: https://techcommunity.microsoft.com/t5/Windows-Server-Insiders/Windows-Server-2019-version-info/m-p/293112/highlight/true#M859 Signed-off-by: Bishara AbuHattoum <bishara@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-03-18qga: update docs with systemd suspend support infoDaniel Henrique Barboza
Commit 067927d62e ("qga: systemd hibernate/suspend/hybrid-sleep support") failed to update qapi-schema.json after adding systemd hibernate/suspend/hybrid-sleep capabilities to guest-suspend-* QGA commands. Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2019-01-11qemu/queue.h: simplify reverse access to QTAILQPaolo Bonzini
The new definition of QTAILQ does not require passing the headname, remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11qga: drop < Vista compatibilityMarc-André Lureau
Building QGA for XP seems possible so far: the dependency on libqemuutil.a implies building qemu-thread-win32.c, which requires Vista API since commit 12f8def0 (v2.9). But qemu-thread isn't being used in QGA, the resulting binary may still work on XP. XP is no longer supported for the past 4.5y, it's time to drop support for it. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181122110039.15972-5-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-01-11build-sys: build with Vista API by defaultMarc-André Lureau
Both qemu & qga build with Vista API by default already, by defining _WIN32_WINNT 0x0600. Set it globally in osdep.h instead. This replaces WINVER by _WIN32_WINNT in osdep.h. WINVER doesn't seem to be really useful these days. (see also https://blogs.msdn.microsoft.com/oldnewthing/20070411-00/?p=27283) Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20181122110039.15972-4-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-12-19Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-patches-pull-request' into staging Trivial patches (2018-12-18) # gpg: Signature made Tue 18 Dec 2018 14:28:41 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" # gpg: aka "Laurent Vivier <laurent@vivier.eu>" # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-patches-pull-request: error: Remove NULL checks on error_propagate() calls vl: Use error_fatal to simplify obvious fatal errors (again) i386: hvf: drop debug printf in decode_sldtgroup docs/devel/build-system: fix 'softmu' typo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-12-18error: Remove NULL checks on error_propagate() callsMarkus Armbruster
Patch created mechanically by rerunning: $ spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \ --macro-file scripts/cocci-macro-file.h \ --dir . --in-place Whitespace tidied up manually. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20181213173113.11211-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2018-12-18qga: update guest-suspend-ram and guest-suspend-hybrid descriptionsDaniel Henrique Barboza
This patch updates the descriptions of 'guest-suspend-ram' and 'guest-suspend-hybrid' to mention that both commands relies now on the proper support for wake up from suspend, retrieved by the 'wakeup-suspend-support' attribute of the 'query-current-machine' QMP command. Reported-by: Balamuruhan S <bala24@linux.vnet.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com> Message-Id: <20181205194701.17836-3-danielhb413@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2018-11-09qga: Add multiple include guard to guest-agent-core.hPeter Maydell
The guest-agent-core.h header was missing the usual guards against multiple inclusion; add them. (Spotted by lgtm.com's static analyzer.) Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-11-09qga-win: fix leaks of build_guest_disk_info()Marc-André Lureau
Introduced in commit b1ba8890e63ce9432c41c5c3fc229f54c87c9c99, vol_h handle should be closed, and "out" cleanup should be done after DeviceIoControl() fails. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: changing --retry-path option behaviorBishara AbuHattoum
Currently whenever the qemu-ga's service doesn't find the virtio-serial the run_agent() loops in a QGA_RETRY_INTERVAL (default 5 seconds) intervals and try to restart the qemu-ga which causes a synchronous loop. Changed to wait and listen for the serial events by registering for notifications a proper serial event handler that deals with events: DBT_DEVICEARRIVAL indicates that the device has been inserted and is available DBT_DEVICEREMOVECOMPLETE indicates that the devive has been removed Which allow us to determine when the channel path is available for the qemu-ga to restart. Signed-off-by: Bishara AbuHattoum <bishara@daynix.com> Signed-off-by: Sameeh Jubran <sameeh@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: report specific error when failing to open channelMichael Roth
Useful in general, but especially now that errors might occur more frequently with --retry-path set. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: install service with --retry-path set by defaultMichael Roth
It's nicer from a management perspective that the agent can survive hotplug/unplug of the channel device, or be started prior to the installation of the channel device's driver without and still be able to resume normal function afterward. On linux there are alternatives like systemd to support this, but on w32 --retry-path is the only option so it makes sense to set it by default when installed as a w32 service. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga: add --retry-path option for re-initializing channel on failureMichael Roth
This adds an option to instruct the agent to periodically attempt re-opening the communication channel after a channel error has occurred. The main use-case for this is providing an OS-independent way of allowing the agent to survive situations like hotplug/unplug of the communication channel, or initial guest set up where the agent may be installed/started prior to the installation of the channel device's driver. There are nicer ways of implementing this functionality via things like systemd services, but this option is useful for platforms like *BSD/w32. Currently a channel error will result in the GSource for that channel being removed from the GMainLoop, but the main loop continuing to run. That behavior results in a dead loop when --retry-path isn't set, and prevents us from knowing when to attempt re-opening the channel when it is set, so we also force the loop to exit as part of this patch. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga: move w32 service handling out of run_agent()Michael Roth
Eventually we want a w32 service to be able to restart the qga main loop from within service_main(). To allow for this we move service handling out of run_agent() such that service_main() calls run_agent() instead of the reverse. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Bishara AbuHattoum <bishara@daynix.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga: hang GAConfig/socket_activation off of GAState globalMichael Roth
For w32 services we rely on the global GAState to access resources associated with the agent within service_main(). Currently this is sufficient for starting the agent since we open the channel once prior to calling service_main(), and simply start the GMainLoop to start the agent from within service_main(). Eventually we want to be able to also [re-]open the communication channel from within service_main(), which requires access to config/socket_activation variables, so we hang them off GAState in preparation for that. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Sameeh Jubran <sameeh@daynix.com> *dont move GAConfig struct, just the typedef *fix build bisect for w32 Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga: group agent init/cleanup init separate routinesMichael Roth
This patch better separates the init/cleanup routines out into separate functions to make the start-up procedure a bit easier to follow. This will be useful when we eventually break out the actual start/stop of the agent's main loop into separates routines that can be called multiple times after the init phase. Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga: fix an off-by-one issueLi Qiang
Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: demystify namespace strippingTomáš Golembiovský
It was not obvious what exactly the cryptic string copying does to the GUID. This change makes the intent clearer. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: return disk device in guest-get-fsinfoTomáš Golembiovský
Report device UNC of the disk. It is reported as "\\.\PhysicalDriveX". Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: handle multi-disk volumesTomáš Golembiovský
Probe the volume for disk extents and return list of all disks. Originally only first disk of composite volume was returned. Note that the patch changes get_pci_info() from one state of brokenness into a different state of brokenness. In other words it still does not do what it's supposed to do (see comment in code). If anyone knows how to fix it, please step in. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: refactor disk infoTomáš Golembiovský
Refactor building of disk info into a function that builds the list and a function that returns infor for single disk. This will be used in future commit that will handle multi-disk volumes. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: report disk serial numberTomáš Golembiovský
Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> *coding style fix-ups (declarations at beginning of block) *improve readability for user-visible errors *cover additional edge-cases with debug statements Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: refactor disk properties (bus)Tomáš Golembiovský
Refactor code that queries bus type to be more generic. The function get_disk_bus_type() has been renamed to build_guest_disk_info(). Following commit(s) will extend this function. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: add debugging informationTomáš Golembiovský
The windows code generaly lacks debug information (compared to posix code). This patch adds some related to HW info in guest-get-fsinfo command. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: fsinfo: pci-info: allow partial infoSameeh Jubran
The call to SetupDiGetDeviceRegistryProperty might fail because the value doesn't exist in the registry, in this case we shouldn't exit from the loop but instead continue to look for other available values in the registry and set this value as unavailable (-1). Signed-off-by: Sameeh Jubran <sjubran@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> *squash in fix for when get_pci_info() returns NULL pci_controller field *fix handling for error_set() cases in get_pci_info(), not just NULL return *force all -1 PCI addr fields if any single one of them isn't found Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga-win: prevent crash when executing fsinfo commandSameeh Jubran
The fsinfo command is currently implemented for Windows only and it's disk parameter can be enabled by adding the define "CONFIG_QGA_NTDDSCSI" to the qga code. When enabled and executed the qemu-ga crashed with the following message: ------------------------------------------------ File qapi/qapi-visit-core.c, Line 49 Expression: !(v->type & VISITOR_OUTPUT) || *obj) ------------------------------------------------ After some digging, turns out that the GuestPCIAddress is null and the qapi visitor doesn't like that, so we can always allocate it instead and initiate all it's members to -1. Signed-off-by: Sameeh Jubran <sjubran@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga: linux: return disk device in guest-get-fsinfoTomáš Golembiovský
Report device node of the disk on Linux (e.g. "/dev/sda2"). Requirs libudev. Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-31qga: linux: report disk serial numberTomáš Golembiovský
Add reporting of disk serial number on Linux guests. The feature depends on libudev. Example: { "name": "dm-2", "mountpoint": "/", ... "disk": [ { "serial": "SAMSUNG_MZ7LN512HCHP-000L1_S1ZKNXAG822493", ... } ], } Signed-off-by: Tomáš Golembiovský <tgolembi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30qga: ignore non present cpus when handling qmp_guest_get_vcpus()Igor Mammedov
If VM has VCPUs plugged sparselly (for example a VM started with 3 VCPUs (cpu0, cpu1 and cpu2) and then cpu1 was hotunplugged so only cpu0 and cpu2 are present), QGA will rise a error error: internal error: unable to execute QEMU agent command 'guest-get-vcpus': open("/sys/devices/system/cpu/cpu1/"): No such file or directory when virsh vcpucount FOO --guest is executed. Fix it by ignoring non present CPUs when fetching CPUs status from sysfs. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30qga-win: add support for qmp_guest_fsfreeze_freeze_listChen Hanxiao
This patch add support for freeze specified fs. The valid mountpoints list member are [1]: The path of a mounted folder, for example, Y:\MountX\ A drive letter, for example, D:\ A volume GUID path of the form \\?\Volume{GUID}\, where GUID identifies the volume A UNC path that specifies a remote file share, for example, \\Clusterx\Share1\ [1] https://docs.microsoft.com/en-us/windows/desktop/api/vsbackup/nf-vsbackup-ivssbackupcomponents-addtosnapshotset Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Chen Hanxiao <chenhanxiao@gmail.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-30qga: Support Unicode paths in guest-file-open on win32Jonathon Reinhart
Currently, the win32 port of QEMU Guest Agent does not properly handle Unicode paths. The JSON decoder produces a valid UTF-8 path string, but this is passed directly to CreateFileA, which is expecting an ANSI string and not UTF-8. This leads to mangled filenames. This patch follows the example of qmp_guest_set_user_password() and uses g_utf8_to_utf16() to convert the string to UTF-16 and calls CreateFileW() explicitly. Signed-off-by: Jonathon Reinhart <jreinhart@cc-sw.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-10-02util: add qemu_write_pidfile()Marc-André Lureau
There are variants of qemu_create_pidfile() in qemu-pr-helper and qemu-ga. Let's have a common implementation in libqemuutil. The code is initially based from pr-helper write_pidfile(), with various improvements and suggestions from Daniel Berrangé: QEMU will leave the pidfile existing on disk when it exits which initially made me think it avoids the deletion race. The app managing QEMU, however, may well delete the pidfile after it has seen QEMU exit, and even if the app locks the pidfile before deleting it, there is still a race. eg consider the following sequence QEMU 1 libvirtd QEMU 2 1. lock(pidfile) 2. exit() 3. open(pidfile) 4. lock(pidfile) 5. open(pidfile) 6. unlink(pidfile) 7. close(pidfile) 8. lock(pidfile) IOW, at step 8 the new QEMU has successfully acquired the lock, but the pidfile no longer exists on disk because it was deleted after the original QEMU exited. While we could just say no external app should ever delete the pidfile, I don't think that is satisfactory as people don't read docs, and admins don't like stale pidfiles being left around on disk. To make this robust, I think we might want to copy libvirt's approach to pidfile acquisition which runs in a loop and checks that the file on disk /after/ acquiring the lock matches the file that was locked. Then we could in fact safely let QEMU delete its own pidfiles on clean exit.. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180831145314.14736-2-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-08-24json: Clean up headersMarkus Armbruster
The JSON parser has three public headers, json-lexer.h, json-parser.h, json-streamer.h. They all contain stuff that is of no interest outside qobject/json-*.c. Collect the public interface in include/qapi/qmp/json-parser.h, and everything else in qobject/json-parser-int.h. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-54-armbru@redhat.com>
2018-08-24json: Pass lexical errors and limit violations to callbackMarkus Armbruster
The callback to consume JSON values takes QObject *json, Error *err. If both are null, the callback is supposed to make up an error by itself. This sucks. qjson.c's consume_json() neglects to do so, which makes qobject_from_json() null instead of failing. I consider that a bug. The culprit is json_message_process_token(): it passes two null pointers when it runs into a lexical error or a limit violation. Fix it to pass a proper Error object then. Update the callbacks: * monitor.c's handle_qmp_command(): the code to make up an error is now dead, drop it. * qga/main.c's process_event(): lumps the "both null" case together with the "not a JSON object" case. The former is now gone. The error message "Invalid JSON syntax" is misleading for the latter. Improve it to "Input must be a JSON object". * qobject/qjson.c's consume_json(): no update; check-qjson demonstrates qobject_from_json() now sets an error on lexical errors, but still doesn't on some other errors. * tests/libqtest.c's qmp_response(): the Error object is now reliable, so use it to improve the error message. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-40-armbru@redhat.com>
2018-08-24json: Redesign the callback to consume JSON valuesMarkus Armbruster
The classical way to structure parser and lexer is to have the client call the parser to get an abstract syntax tree, the parser call the lexer to get the next token, and the lexer call some function to get input characters. Another way to structure them would be to have the client feed characters to the lexer, the lexer feed tokens to the parser, and the parser feed abstract syntax trees to some callback provided by the client. This way is more easily integrated into an event loop that dispatches input characters as they arrive. Our JSON parser is kind of between the two. The lexer feeds tokens to a "streamer" instead of a real parser. The streamer accumulates tokens until it got the sequence of tokens that comprise a single JSON value (it counts curly braces and square brackets to decide). It feeds those token sequences to a callback provided by the client. The callback passes each token sequence to the parser, and gets back an abstract syntax tree. I figure it was done that way to make a straightforward recursive descent parser possible. "Get next token" becomes "pop the first token off the token sequence". Drawback: we need to store a complete token sequence. Each token eats 13 + input characters + malloc overhead bytes. Observations: 1. This is not the only way to use recursive descent. If we replaced "get next token" by a coroutine yield, we could do without a streamer. 2. The lexer reports errors by passing a JSON_ERROR token to the streamer. This communicates the offending input characters and their location, but no more. 3. The streamer reports errors by passing a null token sequence to the callback. The (already poor) lexical error information is thrown away. 4. Having the callback receive a token sequence duplicates the code to convert token sequence to abstract syntax tree in every callback. 5. Known bug: the streamer silently drops incomplete token sequences. This commit rectifies 4. by lifting the call of the parser from the callbacks into the streamer. Later commits will address 3. and 5. The lifting removes a bug from qjson.c's parse_json(): it passed a pointer to a non-null Error * in certain cases, as demonstrated by check-qjson.c. json_parser_parse() is now unused. It's a stupid wrapper around json_parser_parse_err(). Drop it, and rename json_parser_parse_err() to json_parser_parse(). Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180823164025.12553-35-armbru@redhat.com>
2018-07-23qga: process_event() simplification and leak fixMarc-André Lureau
json_parser_parse_err() may return something else than a QDict, in which case we loose the object. Let's keep track of the original object to avoid leaks. When an error occurs, "qdict" contains the response, but we still check the "execute" key there. Untangle a bit this code, by having a clear error path. CC: Michael Roth <mdroth@linux.vnet.ibm.com> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-23qga-win: Handle fstrim for OSes lower than Win8Sameeh Jubran
The defrag.exe tool which is used for executing the fstrim command on Windows doesn't support retrim for OSes lower than Win8. This commit handles this case and returns a suitable error. Output of fstrim before this commit: {"execute":"guest-fstrim"} {"return": {"paths": [{"path": "C:\\", "error": "An invalid command line option was specified. (0x89000008)"}, {"path": "F:\\", "error": "An invalid command line option was specified. (0x89000008)"}, {"path": "S:\\", "error": "An invalid command line option was specified. (0x89000008)"}]}} Reported on: https://bugzilla.redhat.com/show_bug.cgi?id=1594113 Signed-off-by: Sameeh Jubran <sjubran@redhat.com> * use alternative version query code proposed by Sameeh * fix up version check logic * avoid CamelCase variable names when possible Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-16qga: fix file descriptor leakPaolo Bonzini
The file descriptor for /sys/power/state was never closed. Reported by Coverity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-16qga: fix 'driver' leak in guest-get-fsinfoMarc-André Lureau
'driver' is leaked when the loop is not broken. Leak introduced by commit 743c71d03c20d64f2bae5fba6f26cdf5e4b1bda6, spotted by ASAN. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2018-07-05Merge remote-tracking branch ↵Peter Maydell
'remotes/armbru/tags/pull-monitor-2018-07-03-v2' into staging Monitor patches for 2018-07-03 # gpg: Signature made Tue 03 Jul 2018 22:20:13 BST # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-monitor-2018-07-03-v2: (32 commits) qapi: Polish command flags documentation in qapi-code-gen.txt monitor: Improve some comments qmp: Clean up capability negotiation after commit 02130314d8c qobject: Let qobject_from_jsonf() fail instead of abort qmp: Switch timestamp_put() to qdict_from_jsonf_nofail() qmp: Add some comments around null responses qmp: Simplify monitor_qmp_respond() qmp: Replace get_qmp_greeting() by qmp_greeting() qmp: Replace monitor_json_emitter{,raw}() by qmp_{queue,send}_response() qmp: Use QDict * instead of QObject * for response objects qmp: De-duplicate error response building qobject: New qdict_from_jsonf_nofail() monitor: Peel off @mon_global wrapper monitor: Rename use_io_thr to use_io_thread qmp: Don't let JSON errors jump the queue qmp: Don't let malformed in-band commands jump the queue tests/qmp-test: Demonstrate QMP errors jumping the queue qmp: Simplify code around monitor_qmp_dispatch_one() qmp: Always free QMPRequest with qmp_request_free() qmp: Revert change to handle_qmp_command tracepoint ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-07-03qmp: Use QDict * instead of QObject * for response objectsMarkus Armbruster
By using the more specific type, we get fewer downcasts. The downcasts are safe, but not obviously so, at least not locally. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20180703085358.13941-24-armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 07:21:29 +0000