| Age | Commit message (Collapse) | Author |
|---|
|
UTF8 to UTF16 conversion can fail for genuine reasons, let's check errors.
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Laszlo Ersek said: "The length check is off by one (in the safe direction); it
should be (nchars >= 2). The processing should be active for the wide string
L"\r\n" -- resulting in the empty wide string --, I believe."
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Reported-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
* report rather than assert when VCPU count == 0
* fix up subject: s/set-vcpus/get-vcpus/
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Magic constants are a pain to use, especially when we run the
risk that our choice of '1' for QGA_SEEK_CUR might differ from
the host or guest's choice of SEEK_CUR. Better is to use an
enum value, via a qapi alternate type for back-compatibility.
With this,
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":"cur"}}
becomes a synonym for the older
{"command":"guest-file-seek", "arguments":{"handle":1,
"offset":0, "whence":1}}
Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1454089805-5470-9-git-send-email-peter.maydell@linaro.org
|
|
Switch from using g_base64_decode over to qbase64_decode
in order to get error checking of the base64 input data.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
|
|
Exposing OS-specific SEEK_ constants in our qapi was a mistake
(if the host has SEEK_CUR as 1, but the guest has it as 2, then
the semantics are unclear what should happen); if we had a time
machine, we would instead expose only a symbolic enum. It's too
late to change the fact that we have an integer in qapi, but we
can at least document what mapping we want to enforce for all
qga clients (and luckily, it happens to be the mapping that both
Linux and Windows use); then fix the code to match that mapping.
It also helps us filter out unsupported SEEK_DATA and SEEK_HOLE.
In the future, we may wish to move our QGA_SEEK_* constants into
qga/qapi-schema.json, along with updating the schema to take an
alternate type (either the integer, or the string value of the
enum name) - but that's too much risk during hard freeze.
Signed-off-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
For append file open modes, use FILE_APPEND_DATA for the desired access
for writing at the end of the file.
Version 2:
For "a+", "ab+", and "a+b" modes use FILE_APPEND_DATA|GENERIC_READ.
ORing in GENERIC_READ starts a read at the begining of the file. All
writes will append to the end fo the file.
Added white space to maintain the alignment of the guest_file_open_modes[].
Signed-off-by: Kirk Allan <kallan@suse.com>
Cc: qemu-stable@nongnu.org
* use FILE_GENERIC_APPEND macro, which provides same semantics as
FILE_APPEND_DATA, but retains other flags from GENERIC_WRITE
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Set fd non-blocking to avoid common use cases (like reading from a
named pipe) from hanging the agent. This was missed in the original
code.
The patch introduces qemu_set_handle_nonoblocking, the local analog
of qemu_set_nonblock for HANDLES.
The usage of handles in qemu_set_non/block is impossible, because for
win32 there is a difference between file discriptors and file handles,
and all file ops are made via Win32 api.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
CC: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
CloseHandle use HANDLE as an argument, but not *HANDLE
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
This just makes code shorter and better.
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Yuri Pudgorodskiy <yur@virtuozzo.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
g_new(T, n) is neater than g_malloc(sizeof(T) * n). It's also safer,
for two reasons. One, it catches multiplication overflowing size_t.
Two, it returns T * rather than void *, which lets the compiler catch
more type errors.
This commit only touches allocations with size arguments of the form
sizeof(T). Same Coccinelle semantic patch as in commit b45c03f.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
A number of source files have statements accidentally
terminated by a double semicolon - eg 'foo = bar;;'.
This is harmless but a mistake none the less.
The tcg/ia64/tcg-target.c file is whitelisted because
it has valid use of ';;' in a comment containing assembly
code.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
|
|
Use NetUserSetInfo() to set the user password.
This function is notoriously known to be problematic for users with EFS
encrypted files. But the alternative, NetUserChangePassword() requires
the old password. Nevertheless, The EFS file should be recovered by
changing back to the old password.
Signed-off-by: Marc-André Lureau <marcandre.lureau@gmail.com>
Reviewed-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
In order to avoid any confusion, let's allocate new strings when
splitting.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Denis V. Lunev <den@openvz.org>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
PCIAddress inforfation is obtained via SetupApi, which provides the
information about address, bus, etc. We look throught entire device tree
in the system and try to find device object for given volume. For this PDO
SetupDiGetDeviceRegistryProperty is called, which reads PCI configuration
for a given devicei if it is possible.
This is the most convinient way for a userspace service. The lookup is
performed for every volume available. However, this information is
not mandatory for vss-provider.
In order to use SetupApi we need to notify linker about it. We do not need
to install additional libs, so we do not make separate configuration
option to use libsetupapi.su
SetupApi gives as the same information as kernel driver
with IRP_MN_QUERY_INTERFACE.
https://support.microsoft.com/en-us/kb/253232
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* stub out get_pci_info if !CONFIG_QGA_NTDDSCSI
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
According to Microsoft disk location path can be obtained via
IOCTL_SCSI_GET_ADDRESS. Unfortunately this ioctl can not be used for all
devices. There are certain bus types which could be obtained with this
API. Please, refer to the following link for more details
https://technet.microsoft.com/en-us/library/ee851589(v=ws.10).aspx
Bus type could be obtained using IOCTL_STORAGE_QUERY_PROPERTY. Enum
STORAGE_BUS_TYPE describes all buses supported by OS.
Windows defines more bus types than Linux. Thus some values have been added
to GuestDiskBusType.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
* fixed warning in CreateFile due to use of NULL instead of 0
* only provide disk info when CONFIG_QGA_NTDDSCSI=y
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
We should use GetVolumeXXX api to work with volumes. This will help us to
resolve the situation with volumes without drive letter, i.e. when the
volume is mounted as a folder. Such volume is called mounted folder.
This volume is a regular mounted volume from all other points of view.
The information about non mounted volume is reported as System Reserved.
This volume is not mounted and thus it is not writable.
GuestDiskAddressList API is not used because operations are performed with
volumes but no with disks. This means that spanned disk will
be counted and handled as a single volume. It is worth mentioning
that the information about every disk in the volume can be queried
via IOCTL_VOLUME_GET_VOLUME_DISK_EXTENTS.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
We need qmp_quest_get_fsinfo togather with vss-provider, which works with
volumes. The call to this function is implemented via
FindFirst/NextVolumes. Moreover, volumes in Windows OS are filesystem unit,
so it will be more effective to work with them rather with devices.
Signed-off-by: Olga Krishtal <okrishtal@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Eric Blake <eblake@redhat.com>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
By default, IPv4 prefixes will be derived by matching the address
to those returned by GetAdaptersInfo. IPv6 prefixes can not be
matched this way due to the unpredictable order of entries.
In Windows Vista/2008 guests and newer, both IPv4 and IPv6 prefixes
can be retrieved from OnLinkPrefixLength. Setting --extra-cflags
in the build configuration to "-D_WIN32_WINNT=0x600"
or greater makes OnLinkPrefixLength available. Setting --extra-cflags
is not required and if not set, the default approach to get the prefix
will be taken.
Signed-off-by: Kirk Allan <kallan@suse.com>
* drop ws2ipdef.h, it's missing on old mingw, and ws2tcpip.h already
includes it automatically on new builds
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
The current guest-fstrim support only returns an error if some
mountpoint was unable to be trimmed, skipping any possible additional
mountpoints. The result of the TRIM operation itself is also discarded.
This change returns a per mountpoint result of the TRIM operation. If an
error occurs on some mountpoints that error is returned and the
guest-fstrim continue with any additional mountpoints.
The returned values for errors, minimum and trimmed are dependant on the
filesystem, storage stacks and kernel version.
Signed-off-by: Justin Ossevoort <justin@quarantainenet.nl>
* s/type/struct/ in schema type definitions
* moved version annotation for new guest-fstrim return field to
the field itself rather than applying to the entire command
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
These macros expand into error class enumeration constant, comma,
string. Unclean. Has been that way since commit 13f59ae.
The error class is always ERROR_CLASS_GENERIC_ERROR since the previous
commit.
Clean up as follows:
* Prepend every use of a QERR_ macro by ERROR_CLASS_GENERIC_ERROR, and
delete it from the QERR_ macro. No change after preprocessing.
* Rewrite error_set(ERROR_CLASS_GENERIC_ERROR, ...) into
error_setg(...). Again, no change after preprocessing.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Debug printouts extended, helps installation troubleshooting
Signed-off-by: Yossi Hindin <yhindin@redhat.com>
Message-Id: <1430913460-13174-3-git-send-email-yhindin@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The command is not implemented correctly yet. The documentation allows
to not pass any value to set, in which case the time is re-read from
RTC. However, reading CMOS on Windows is not trivial to implement. So
instead of pretending we've set the correct time, fail explicitly.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
For memory block command, we only support for linux with sysfs.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Introduce three new guest commands:
guest-get-memory-blocks, guest-set-memory-blocks, guest-get-memory-block-size.
With these three commands, we can support online/offline guest's memory block
(logical memory hotplug/unplug) as required from host.
Signed-off-by: zhanghailiang <zhang.zhanghailiang@huawei.com>
*generalized guest-get-memory-block-size to get-get-memory-block-info
for future extensibility
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
The following commands are implemented:
- guest_file_open
- guest_file_close
- guest_file_write
- guest_file_read
- guest_file_seek
- guest_file_flush
Motivation is quite simple: Windows guests should be supported with the
same set of features as Linux one. Also this patch is a prerequisite for
Windows guest-exec command support.
Signed-off-by: Olga Krishtal <okrishtal@parallels.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
CC: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Add a new 'guest-set-user-password' command for changing the password
of guest OS user accounts. This command is needed to enable OpenStack
to support its API for changing the admin password of guests running
on KVM/QEMU. It is not practical to provide a command at the QEMU
level explicitly targetting administrator account password change
only, since different guest OS have different names for the admin
account. While UNIX systems use 'root', Windows systems typically
use 'Administrator' and even that can be renamed. Higher level apps
like OpenStack have the ability to figure out the correct admin
account name since they have info that QEMU/libvirt do not.
The command accepts either the clear text password string, encoded
in base64 to make it 8-bit safe in JSON:
$ echo -n "123456" | base64
MTIzNDU2
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": false,
"username": "root",
"password": "MTIzNDU2" } }'
{"return":{}}
Or a password that has already been run though a crypt(3) like
algorithm appropriate for the guest, again then base64 encoded:
$ echo -n '$6$n01A2Tau$e...snip...DfMOP7of9AJ1I8q0' | base64
JDYkb...snip...YT2Ey
$ virsh -c qemu:///system qemu-agent-command f21x86_64 \
'{ "execute": "guest-set-user-password",
"arguments": { "crypted": true,
"username": "root",
"password": "JDYkb...snip...YT2Ey" } }'
NB windows support is desirable, but not implemented in this
patch.
Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Currently management softwares cannot know whether a qemu-ga command is
supported or not on the running platform until they actually execute it.
This patch disables unsupported commands at launch time of qemu-ga, so that
management softwares can check whether they are supported from 'enabled'
property of the result from 'guest-info' command.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Add command to get mounted filesystems information in the guest.
The returned value contains a list of mountpoint paths and
corresponding disks info such as disk bus type, drive address,
and the disk controllers' PCI addresses, so that management layer
such as libvirt can resolve the disk backends.
For example, when `lsblk' result is:
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
sdb 8:16 0 1G 0 disk
`-sdb1 8:17 0 1024M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
sdc 8:32 0 1G 0 disk
`-sdc1 8:33 0 512M 0 part
`-vg0-lv0 253:1 0 1.4G 0 lvm /mnt/test
vda 252:0 0 25G 0 disk
`-vda1 252:1 0 25G 0 part /
where sdb is a SCSI disk with PCI controller 0000:00:0a.0 and ID=1,
sdc is an IDE disk with PCI controller 0000:00:01.1, and
vda is a virtio-blk disk with PCI device 0000:00:06.0,
guest-get-fsinfo command will return the following result:
{"return":
[{"name":"dm-1",
"mountpoint":"/mnt/test",
"disk":[
{"bus-type":"scsi","bus":0,"unit":1,"target":0,
"pci-controller":{"bus":0,"slot":10,"domain":0,"function":0}},
{"bus-type":"ide","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":1,"domain":0,"function":1}}],
"type":"xfs"},
{"name":"vda1", "mountpoint":"/",
"disk":[
{"bus-type":"virtio","bus":0,"unit":0,"target":0,
"pci-controller":{"bus":0,"slot":6,"domain":0,"function":0}}],
"type":"ext4"}]}
In Linux guest, the disk information is resolved from sysfs. So far,
it only supports virtio-blk, virtio-scsi, IDE, SATA, SCSI disks on x86
hosts, and "disk" parameter may be empty for unsupported disk types.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
If an array of mount point paths is specified as 'mountpoints' argument
of guest-fsfreeze-freeze-list, qemu-ga will only freeze the file systems
mounted on specified paths in Linux guests. Otherwise, it works as the
same way as guest-fsfreeze-freeze.
This would be useful when the host wants to create partial disk snapshots.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
*updated schema to report 2.2 as initial supported version
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
token should be closed in all conditions.
So move CloseHandle(token) to "out" branch.
Signed-off-by: Wang Rui <moon.wangrui@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
acquire_privilege(), execute_async() and check_suspend_mode() do
nothing when called with an error set. Callers shouldn't do that, and
no caller does. Drop the superfluous tests.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in the guest agent command handler functions
are merely fragile, because all chall chains (do_qmp_dispatch() via
the generated marshalling functions) pass a non-null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
As the description to the guest-set-time states, the command is
there to ease time synchronization after resume. If guest was
suspended for longer period of time, its system time can go off
so badly, that even NTP refuses to set it. That's why the command
was invented: to give users chance to set the time (not
necessarily 100% correct). However, there's is no real need for
us to require users to pass an arbitrary time. Especially if we
can read the correct value from RTC (boiling down to reading
host's time). Hence this commit enables logic:
guest-set-time() == guest-set-time($now_from_rtc)
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
Both code locations cause a compiler warning. Using "%s" instead of "%lu"
would result in a program crash if the wrong code were executed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1385409257-2522-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Support guest-fsfreeze-freeze and guest-fsfreeze-thaw commands for Windows
guests. When fsfreeze command is issued, it calls the VSS requester to
freeze filesystems and applications. On thaw command, it again tells the VSS
requester to thaw them.
This also adds calling of initialize functions for the VSS requester.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
*added stub for w32
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch cleans up return sentences in the end of void functions.
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@gmail.com>
|
|
FITRIM is a mounted filesystem feature to discard (or "trim") blocks which
are not in use by the filesystem. This is useful for solid-state drives
(SSDs) and thinly-provisioned storage. Provide access to the feature
from the host so that filesystems can be trimmed periodically or before
migration.
Here is an example using scsi_debug:
# modprobe scsi_debug lbpu=1 lbpws=1
# sg_vpd -p0xb2 /dev/sdb
Logical block provisioning VPD page (SBC):
Unmap command supported (LBPU): 1
Write same (16) with unmap bit supported (LBWS): 1
Write same (10) with unmap bit supported (LBWS10): 0
# mke2fs /dev/sdb
# cat /sys/bus/pseudo/drivers/scsi_debug/map
1-616,16257-16383
# mount /dev/sdb /run/media/pbonzini/test
# dd if=/dev/zero of=/run/media/pbonzini/test/file
# cat map
1-616,645-1588,1599-4026,4029-16383
# rm /run/media/pbonzini/test/file
# ./qemu-ga /dev/fd/0
{"execute":"guest-fstrim"}
{"return": {}}
# cat map
1-612
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
