| Age | Commit message (Collapse) | Author |
|---|
|
- remove qemu_calculate_timeout;
- explicitly size timeout to uint32_t;
- introduce slirp_update_timeout;
- pass NULL as timeout argument to select in case timeout is the maximum
value;
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Paul Brook <paul@codesourcery.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
QED uses vm_clock timers so that images are not touched during and after
migration. This however does not apply to qemu-io and qemu-img.
Treat vm_clock as a synonym for rt_clock there, and enable it.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Despite the fact that the qemu-tool environment has no guest running and
vm_clock therefore does not make sense, there is code that gets the
vm_clock time even in qemu-tool. Therefore, revert the abort(3) call
and just return 0 like we used to. This unbreaks qemu-img/qemu-io with
QED and Kevin has also expressed interest in this for qcow2.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
In some cases initializing the alarm timers can lead to non-negligable
overhead from programs that link against qemu-tool.o. At least,
setting a max-resolution WinMM alarm timer via mm_start_timer() (the
current default for Windows) can increase the "tick rate" on Windows
OSs and affect frequency scaling, and in the case of tools that run
in guest OSs such has qemu-ga, the impact can be fairly dramatic
(+20%/20% user/sys time on a core 2 processor was observed from an idle
Windows XP guest).
This patch doesn't address the issue directly (not sure what a good
solution would be for Windows, or what other situations it might be
noticeable), but it at least limits the scope of the issue to programs
that "opt-in" to using the main-loop.c functions by only enabling alarm
timers when qemu_init_main_loop() is called, which is already required
to make use of those facilities, so existing users shouldn't be
affected.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Commit cbcfa0418f0c196afa765f5c9837b9344d1adcf3 (link the main loop and
its dependencies into the tools) introduced stray usages of int64.
Use int64_t instead.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
All files under GPLv2 will get GPLv2+ changes starting tomorrow.
event_notifier.c and exec-obsolete.h were only ever touched by Red Hat
employees and can be relicensed now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Using the main loop code from QEMU enables tools to operate fully
asynchronously. Advantages include better Windows portability (for some
definition of portability) over glib's.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Now when you try to migrate with qed, you get:
(qemu) migrate tcp:localhost:1025
Block format 'qed' used by device 'ide0-hd0' does not support feature 'live migration'
(qemu)
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qemu_service_io was mainly an alias to qemu_notify_event,
currently used only by PPC for timer hack, so call
qemu_notify_event directly.
Signed-off-by: Frediano Ziglio <freddy77@gmail.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qemu_malloc/qemu_free no longer exist after this commit.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Block drivers may use timers for flushing metadata to disk or
reconnecting to a network drive. Stub out the following functions in
qemu-tool.c:
QEMUTimer *qemu_new_timer_ns(QEMUClock *clock, int scale,
QEMUTimerCB *cb, void *opaque)
void qemu_free_timer(QEMUTimer *ts)
void qemu_del_timer(QEMUTimer *ts)
void qemu_mod_timer(QEMUTimer *ts, int64_t expire_time)
int64_t qemu_get_clock_ns(QEMUClock *clock)
They will result in timers never firing when linked against qemu-tool.o.
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Remove unused sysemu.h include directives to speed up build
with the following patches.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
It's wrong to call BHs directly, even in tools. The only operations that
schedule BHs are called in a loop that (indirectly) contains a call to
qemu_bh_poll anyway, so we're not losing the scheduled BHs: Tools either use
synchronous functions, which are guaranteed to have completed (including any
BHs) when they return; or if they use asynchronous functions, they need to call
qemu_aio_wait() or similar functions already today.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Move timer init functions to a new file, qemu-timer-common.c. Make other
critical timer functions inlined to preserve performance in
qemu-timer.c, also move muldiv64() (used by the inline functions)
to qemu-timer.h.
Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly.
Remove a similar/duplicate definition in qemu-tool.c.
Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used
there.
After this change, tracing can be used also for user code and
simpletrace on Win32.
Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The location tracking interface is used by code shared with qemi-img,
qemu-nbd and qemu-io, so it needs to be available there. Commit
827b0813 provides it in a rather hamfisted way: it adds a dummy
implementation to qemu-tool.c.
It's cleaner to provide the real thing, and put a few more dummy
monitor functions into qemu-tool.c.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
It was always only used for reads
Signed-off-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
New struct Location holds a location. So far, the only location is
LOC_NONE, so this doesn't do anything useful yet.
Passing the current location all over the place would be too
cumbersome. Hide it away in static cur_loc instead, and provide
accessors. Print it in error_report().
Store it in QError, and print it in qerror_print().
Store it in QemuOpt, for use by qemu_opts_foreach(). This makes
error_report() do the right thing when it runs within
qemu_opts_foreach().
We may still have to store it in other data structures holding user
input for better error messages. Left for another day.
|
|
error_report() terminates the message with a newline. Strip it it
from its arguments.
This fixes a few error messages lacking a newline:
net_handle_fd_param()'s "No file descriptor named %s found", and
tap_open()'s "vnet_hdr=1 requested, but no kernel support for
IFF_VNET_HDR available" (all three versions).
There's one place that passes arguments without newlines
intentionally: load_vmstate(). Fix it up.
|
|
|
|
|
|
Asynchronous events are generated with a call to
monitor_protocol_event().
This function builds the right data-type and emit the event
right away. The emitted data is always a JSON object and its
format is as follows:
{ "event": json-string,
"timestamp": { "seconds": json-number, "microseconds": json-number },
"data": json-value }
This design is based on ideas by Amit Shah <amit.shah@redhat.com>.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Now qemu_error can be called also from shared files, e.g. block.c.
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Add the possibility to use AIO and BHs without allowing foreign callbacks to be
run. Basically, you put your own AIOs and BHs in a separate context. For
details see the comments in the source.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
I used the following command to enable debugging:
perl -p -i -e 's/^\/\/#define DEBUG/#define DEBUG/g' * */* */*/*
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Refactor the monitor API and prepare it for decoupled terminals:
term_print functions are renamed to monitor_* and all monitor services
gain a new parameter (mon) that will once refer to the monitor instance
the output is supposed to appear on. However, the argument remains
unused for now. All monitor command callbacks are also extended by a mon
parameter so that command handlers are able to pass an appropriate
reference to monitor output services.
For the case that monitor outputs so far happen without clearly
identifiable context, the global variable cur_mon is introduced that
shall once provide a pointer either to the current active monitor (while
processing commands) or to the default one. On the mid or long term,
those use case will be obsoleted so that this variable can be removed
again.
Due to the broad usage of the monitor interface, this patch mostly deals
with converting users of the monitor API. A few of them are already
extended to pass 'mon' from the command handler further down to internal
functions that invoke monitor_printf.
At this chance, monitor-related prototypes are moved from console.h to
a new monitor.h. The same is done for the readline API.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6711 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6531 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Fix data type (this fixes a warning from sparse)
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5834 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5571 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Replace signalfd with signal handler/pipe. There is no way to interrupt
the CPU execution loop when a file descriptor becomes readable. This
results in a large performance regression in sparc emulation during
bootup.
This patch switches us to signal handler/pipe which was originally
suggested by Ian Jackson. The signal handler lets us interrupt the
CPU emulation loop while the write to a pipe lets us avoid the
select/signal race condition.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5451 c046a42c-6fe2-441c-8c8c-71466251a162
|
|
Right now, we sprinkle #if defined(QEMU_IMG) && defined(QEMU_NBD) all over the
code. It's ugly and causes us to have to build multiple object files for
linking against qemu and the tools.
This patch introduces a new file, qemu-tool.c which contains enough for
qemu-img, qemu-nbd, and QEMU to all share the same objects.
This also required getting qemu-nbd to be a bit more Windows friendly. I also
changed the Windows block-raw to use normal IO instead of overlapping IO since
we don't actually do AIO yet on Windows. I changed the various #if 0's to
#if WIN32_AIO to make it easier for someone to eventually fix AIO on Windows.
After this patch, there are no longer any #ifdef's related to qemu-img and
qemu-nbd.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5226 c046a42c-6fe2-441c-8c8c-71466251a162
|
