aboutsummaryrefslogtreecommitdiff
path: root/qemu-timer.h
AgeCommit message (Collapse)Author
2011-04-15Move clock related functions to qemu-timer.hBlue Swirl
Move declarations for clock related functions from sysemu.h to qemu-timer.h. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-04-15qemu_next_deadline should not consider host-time timersPaolo Bonzini
It is purely for icount-based virtual timers. And now that we got the code right, rename the function to clarify the intended scope. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-04-15enable vm_clock to "warp" in the iothread+icount casePaolo Bonzini
The previous patch however is not enough, because if the virtual CPU goes to sleep waiting for a future timer interrupt to wake it up, qemu deadlocks. The timer interrupt never comes because time is driven by icount, but the vCPU doesn't run any insns. You could say that VCPUs should never go to sleep in icount mode if there is a pending vm_clock timer; rather time should just warp to the next vm_clock event with no sleep ever taking place. Even better, you can sleep for some time related to the time left until the next event, to avoid that the warps are too visible externally; for example, you could be sending network packets continously instead of every 100ms. This is what this patch implements. qemu_clock_warp is called: 1) whenever a vm_clock timer is adjusted, to ensure the warp_timer is synchronized; 2) at strategic points in the CPU thread, to make sure the insn counter is synchronized before the CPU starts running. In any case, the warp_timer is disabled while the CPU is running, because the insn counter will then be making progress on its own. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Edgar E. Iglesias <edgar.iglesias@gmail.com> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-03-21remove qemu_get_clockPaolo Bonzini
These patches are already not doing a great service to out-of-tree modifications to QEMU. However, at least we can warn them by getting rid of the old confusing functions, or otherwise causing compilation errors. This patch removes qemu_get_clock; the previous one changed qemu_new_timer's signature. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21add a generic scaling mechanism for timersPaolo Bonzini
This enables rt_clock timers to use nanosecond resolution, just by using the _ns functions; there is really no reason to forbid that. Migrated timers are all using vm_clock (of course; but I checked that anyway) so the timers in the savevm files are already in nanosecond resolution. So this patch makes no change to the migration format. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2011-03-21add more helper functions with explicit milli/nanosecond resolutionPaolo Bonzini
The code doesn't make much sense right now, but it will as soon as timers will be able to scale their resolution arbitrarily. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2010-10-30Mov muldiv64 to qemu-common.h (Thus unbreaking gus)malc
Signed-off-by: malc <av1474@comtv.ru>
2010-10-23qemu-timer: move commonly used timer code to qemu-timer-commonBlue Swirl
Move timer init functions to a new file, qemu-timer-common.c. Make other critical timer functions inlined to preserve performance in qemu-timer.c, also move muldiv64() (used by the inline functions) to qemu-timer.h. Adjust block/raw-posix.c and simpletrace.c to use get_clock() directly. Remove a similar/duplicate definition in qemu-tool.c. Adjust hw/omap_clk.c to include qemu-timer.h because muldiv64() is used there. After this change, tracing can be used also for user code and simpletrace on Win32. Cc: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Acked-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-27Implement cpu_get_real_ticks for Alpha.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-04-17Fix --enable-profiler compilation.Richard Henderson
There's a header file inclusion ordering problem between cpu-all.h and qemu-timer.h, such that cpu_get_real_ticks is not defined when we attempt to use it in profile_getclock. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-04-03Make cpu_get_real_ticks use mfsprAlexander Graf
PowerPC CPUs have had two ways to read the time base for quite some time now. They provide it using the mfspr instruction or - if a special bit is set in that opcode - using mftb. For timekeeping we're currently using mftb. While trying to get Qemu up and running on an e500v2 system, I stumbled over the CPU not supporting mftbu. It just throws an illegal instruction trap. So let's read the SPR values instead. All PPC CPUs should support them anyways. I tested this patch on an e500v2 system where it makes qemu work and on my 970MP system with 32-bit user space where everything still works with this patch applied. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: malc <av1474@comtv.ru>
2010-03-29Compile qemu-timer only onceBlue Swirl
Arrange various declarations so that also non-CPU code can access them, adjust users. Move CPU specific code to cpus.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-03-17split out qemu-timer.cPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-02-09add qemu_get_clock_nsPaolo Bonzini
Some places use get_clock directly because they want to access the rt_clock with nanosecond precision. Add a function to do exactly that instead of using internal interfaces. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-05Introduce QEMU_CLOCK_HOSTJan Kiszka
Despite its name QEMU_CLOCK_REALTIME is (normally) not using CLOCK_REALTIME / the host system time as base. In order to allow also non-trivial RTC emulations (MC146818) to follow the host time instead of the virtual guest time, introduce the new clock type QEMU_CLOCK_HOST. It is unconditionally based on CLOCK_REALTIME, thus will follow system time changes of the host. The only limitation of its current implementation is that pending host_clock timers may not fire early if the host time is pushed forward beyond their expiry. So far no urgent need to overcome this limitation was identified, so it's left as simple as it is (expiry on next alarm timer tick). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11Make get_ticks_per_sec() a static inlineAnthony Liguori
ticks_per_sec is a constant. There's no need to store it as a variable as it never changes since our time is based on units. Convert get_ticks_per_sec() to a static inline and move the constant into qemu-timer.h. Remove all references to QEMU_TIMER_BASE so that we consistently use this interface. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-09-11Unexport ticks_per_sec variable. Create get_ticks_per_sec() functionJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-08-10variable timer intervalsStefano Stabellini
This patch introduces dynamic timer intervals: we slow down the refresh rate when there in no much activity but we get back to a fast refresh rate when the activity resume. Please note that qemu_timer_expired is not an inline function any more because I needed to call it from vnc.c however I don't think this change should have any serious consequence. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Message-Id:
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 18:55:44 +0000