| Age | Commit message (Collapse) | Author |
|---|
|
net/slirp.c says:
/* default settings according to historic slirp */
struct in_addr net = { .s_addr = htonl(0x0a000200) }; /* 10.0.2.0 */
struct in_addr mask = { .s_addr = htonl(0xffffff00) }; /* 255.255.255.0 */
struct in_addr host = { .s_addr = htonl(0x0a000202) }; /* 10.0.2.2 */
struct in_addr dhcp = { .s_addr = htonl(0x0a00020f) }; /* 10.0.2.15 */
struct in_addr dns = { .s_addr = htonl(0x0a000203) }; /* 10.0.2.3 */
Which I think is not what the documentation says.
Signed-off-by: Brad Hards <bradh@frogmouth.net>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
helpfull -> helpful
usefull -> useful
cotrol -> control
and a grammar fix.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
New option -display none. This option differs from -nographic by not
trying to take control of stdio etc. but instead behaves as if a
graphics display is enabled, except that it doesn't show one.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch introduces a -display argument which consolidates the
setting of the display mode. Valid options are:
sdl/curses/default
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This option allow to disable adaptive behaviors in some encodings.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When MSI is off, each interrupt needs to be bounced through the io
thread when it's set/cleared, so vhost-net causes more context switches and
higher CPU utilization than userspace virtio which handles networking in
the same thread.
We'll need to fix this by adding level irq support in kvm irqfd,
for now disable vhost-net in these configurations.
Added a vhostforce flag to force vhost-net back on.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
With current sndbuf default value, a blocked
target guest can prevent another guest from
transmitting any packets. While current
sndbuf value (1M) is reported to help some
UDP based workloads, the default should
be safe (0).
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Adding a chardev backend for spice, where spice determines what
to do with it based on the name attribute given during chardev creation.
For usage by spice vdagent in conjunction with a properly named
virtio-serial device, and future smartcard channel usage.
Example usage:
qemu -device virtio-serial -chardev spicevmc,name=vdagent,id=vdagent \
-device virtserialport,chardev=vdagent,name=com.redhat.spice.0
v4->v5:
* add tracing events
* fix missing comma
* fix help string to show debug is optional
v3->v4:
* updated commit message
v1->v3 changes: (v2 had a wrong commit message)
* removed spice-qemu-char.h, folded into ui/qemu-spice.h
* removed dead IOCTL code
* removed comment
* removed ifdef CONFIG_SPICE from qemu-config.c and qemu-options.hx help.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
* 'spice.v23.pull' of git://anongit.freedesktop.org/spice/qemu:
vnc/spice: add set_passwd monitor command.
vnc: support password expire
vnc: auth reject cleanup
spice: add qmp 'query-spice' and hmp 'info spice' commands.
spice: connection events.
spice: add qxl device
spice: add qxl vgabios binary.
|
|
qxl is a paravirtual graphics card. The qxl device is the bridge
between the guest and the spice server (aka libspice-server). The
spice server will send the rendering commands to the spice client, which
will actually render them.
The spice server is also able to render locally, which is done in case
the guest wants read something from video memory. Local rendering is
also used to support display over vnc and sdl.
qxl is activated using "-vga qxl". qxl supports multihead, additional
cards can be added via '-device qxl".
[ v2: add copyright to files ]
[ v2: use qemu-common.h for standard includes ]
[ v2: create separate qxl-vga device for primary ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add an option to specify the host IP to send multicast packets from,
when using a multicast socket for networking. The option takes an IP
address and sets the IP_MULTICAST_IF socket option, which causes the
packets to use that IP's interface as an egress.
This is useful if the host machine has several interfaces with several
virtual networks across disparate interfaces.
Signed-off-by: Mike Ryan <mikeryan@ISI.EDU>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
This patch adds a few more options to tweak spice server behavior.
The documentation update chunk has the details ;)
|
|
Make listening address configurable. Also add options to
force using IPv4 or IPv6.
|
|
This allows to enforce tls or plaintext usage for certain spice
channels.
[ v2: code style fixup ]
|
|
This patch adds options to the -spice command line switch to
configure image compression.
[ v2: speling fix in the documentation ]
|
|
Add options to the -spice command line switch to setup tls.
|
|
Add -spice command line switch. Has support setting passwd and port for
now. With this patch applied the spice client can successfully connect
to qemu. You can't do anything useful yet though.
|
|
This patch adds an optional command line switch '-trace' to specify the
filename to write traces to, when qemu starts.
Eg, If compiled with the 'simple' trace backend,
[temp@system]$ qemu -trace FILENAME IMAGE
Allows the binary traces to be written to FILENAME instead of the option
set at config-time.
Signed-off-by: Prerna Saxena <prerna@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
|
|
This is equivalent to SM_PASSTHROUGH security model.
The only exception is, failure of privilige operation like chown
are ignored. This makes a passthrough like security model usable
for people who runs kvm as non root
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* 'for-anthony' of git://repo.or.cz/qemu/kevin:
Fix -snapshot deleting images on disk change
block: Use error codes from lower levels for error message
block: default to 0 minimal / optiomal I/O size
move 'unsafe' to end of caching modes in help
virtio-blk: Create exit function to unregister savevm
block migration: propagate return value when bdrv_write() returns < 0
ide/atapi: add support for GET EVENT STATUS NOTIFICATION
|
|
The lossy option can be used to enable lossy compression
methods like gradient or jpeg. This patch disable them by
default.
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Libvirt parses qemu help output to determine qemu features. In particular
it probes for the following: "cache=writethrough|writeback|none". The
addition of the unsafe cache mode was inserted within this string, as
opposed to being added to the end, which impacted libvirt's probe.
Unbreak libvirt by keeping the existing cache modes intact and add
unsafe to the end.
This problem only manifests itself if a caching mode is explicitly
specified in the libvirt xml, in which case older syntax for caching is
passed to qemu, which it no longer understands.
Signed-off-by: Bruce Rogers <brogers@novell.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
|
|
Commit 5989020bc11f8ba448d6fb79f4562f882a693d89 introduced a chardev
option to disable signals on stdio. Add the corresponding documentation.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
The new option is:
-fsdev fstype,id=myid,path=/share_path/,security_model=[mapped|passthrough]
-virtfs fstype,path=/share_path/,security_model=[mapped|passthrough],mnt_tag=tag
In the case of mapped security model, files are created with QEMU user
credentials and the client-user's credentials are saved in extended attributes.
Whereas in the case of passthrough security model, files on the
filesystem are directly created with client-user's credentials.
Signed-off-by: Venkateswararao Jujjuri <jvrao@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
When using -snapshot we don't care about data integrity of the cow file
at all, so let's disable flushing there and squeeze out the last drop
of performance we could possibly get.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Usually the guest can tell the host to flush data to disk. In some cases we
don't want to flush though, but try to keep everything in cache.
So let's add a new cache value to -drive that allows us to set the cache
policy to most aggressive, disabling flushes. We call this mode "unsafe",
as guest data is not guaranteed to survive host crashes anymore.
This patch also adds a noop function for aio, so we can do nothing in AIO
fashion.
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Commit 6616b2ad reverted commit 40ea285c. Looks like a mismerge to
me.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Currently the commandline to create a virtual-filesystem pass-through between
the guest and the host is as follows:
#qemu -fsdev fstype,id=ID,path=path/to/share \
-device virtio-9p-pci,fsdev=ID,mount_tag=tag \
This patch provides a syntactic short-cut to achieve the same as follows:
#qemu -virtfs fstype,path=path/to/share,mount_tag=tag
This will be internally expanded as:
#qemu -fsdev fstype,id=tag,path=path/to/share, \
-device virtio-9p-pci,fsdev=tag,mount_tag=tag \
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This patch creates a new command line option named -fsdev to hold any file
system specific information.
The option will currently hold the following attributes:
-fsdev fstype id=id,path=path_to_share
where
fstype: Type of the file system.
id: Identifier used to refer to this fsdev
path: The path on the host that is identified by this fsdev.
[aneesh.kumar@linux.vnet.ibm.com: Abstraction using FsContext]
Signed-off-by: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
|
|
This adds vhost binary option to tap, to enable vhost net accelerator.
Default is off for now, we'll be able to make default on long term
when we know it's stable.
vhostfd option can be used by management, to pass in the fd. Assigning
vhostfd implies vhost=on.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Move target specific functions and RAM handling to arch_init.c.
Add a flag to QEMUOptions structure to indicate for which
architectures the option is allowed, check the flag
in run time and remove conditional code in option handling.
Now that no target dependencies remain, compile vl.c only once
for all targets.
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
Split long unbreakable lines to smaller sections.
Spotted by Debian Lintian tool:
http://lintian.debian.org/full/pkg-qemu-devel@lists.alioth.debian.org.html#qemu
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Port qemu-kvm's -mem-path and -mem-prealloc options. These are useful
for backing guest memory with huge pages via hugetlbfs.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
CC: john cooper <john.cooper@redhat.com>
|
|
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
|
|
* Add line options to function index.
* Add description for -set (TODO).
* Add description for -global (TODO).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Similar to the qemu-img.c patch, but I also have to unescape remaining
% signs in qemu-options.hx.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
Since qemu-options.h is only used in vl.c, we can avoid using
brittle interpolation from a generated file.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: malc <av1474@comtv.ru>
|
|
While there, use "property" rather than "option", for consistency with
-global.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Some more command line options had entries for command line help,
but documentation for texi and derived formats (man, html, info)
was missing.
For conditional options, the texi documentation was added
unconditionally.
This seems reasonable because typically man pages are
shared, and html users expect to see one documentation
(not several nearly identical documents for the different
systems).
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
* Fix column for help text.
* Give some more help, especially for the new '?' parameters.
Signed-off-by: Stefan Weil <weil@mail.berlios.de>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
A new option, -nodefconfig is introduced to prevent loading from the default
config location. Otherwise, two configuration files will be searched for,
qemu.conf and target-<TARGET_NAME>.conf.
To ensure that the default configuration is overridden by a user specified
config, we introduce a two stage option parsing mechanism.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
This commit converts the virtio-console device to create a new
virtio-serial bus that can host console and generic serial ports. The
file hosting this code is now called virtio-serial-bus.c.
The virtio console is now a very simple qdev device that sits on the
virtio-serial-bus and communicates between the bus and qemu's chardevs.
This commit also includes a few changes to the virtio backing code for
pci and s390 to spawn the virtio-serial bus.
As a result of the qdev conversion, we get rid of a lot of legacy code.
The old-style way of instantiating a virtio console using
-virtioconsole ...
is maintained, but the new, preferred way is to use
-device virtio-serial -device virtconsole,chardev=...
With this commit, multiple devices as well as multiple ports with a
single device can be supported.
For multiple ports support, each port gets an IO vq pair. Since the
guest needs to know in advance how many vqs a particular device will
need, we have to set this number as a property of the virtio-serial
device and also as a config option.
In addition, we also spawn a pair of control IO vqs. This is an internal
channel meant for guest-host communication for things like port
open/close, sending port properties over to the guest, etc.
This commit is a part of a series of other commits to get the full
implementation of multiport support. Future commits will add other
support as well as ride on the savevm version that we bump up here.
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Signed-off-by: Naphtali Sprei <nsprei@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
