aboutsummaryrefslogtreecommitdiff
path: root/qemu-options.hx
AgeCommit message (Collapse)Author
2023-03-03loongarch: Add smbios command line option.Song Gao
LoongArch has enabled CONFIG_SMBIOS, but didn't enable CLI '-smbios'. Fixes: 3efa6fa1e629 ("hw/loongarch: Add smbios support") Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20230227035905.1290953-2-gaosong@loongson.cn>
2023-02-17net: stream: add a new option to automatically reconnectLaurent Vivier
In stream mode, if the server shuts down there is currently no way to reconnect the client to a new server without removing the NIC device and the netdev backend (or to reboot). This patch introduces a reconnect option that specifies a delay to try to reconnect with the same parameters. Add a new test in qtest to test the reconnect option and the connect/disconnect events. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2023-02-15ui: remove deprecated 'password' option for SPICEDaniel P. Berrangé
This has been replaced by the 'password-secret' option, which references a 'secret' object instance. Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2023-02-15block: mention 'password-secret' option for -iscsiDaniel P. Berrangé
The 'password-secret' option was added commit b189346eb1784df95ed6fed610411dbf23d19e1f Author: Daniel P. Berrangé <berrange@redhat.com> Date: Thu Jan 21 14:19:21 2016 +0000 iscsi: add support for getting CHAP password via QCryptoSecret API but was not mentioned in the command line docs Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2023-02-02semihosting: add semihosting section to the docsAlex Bennée
The main reason to do this is to document our O_BINARY implementation decision somewhere. However I've also moved some of the implementation details out of qemu-options and added links between the two. As a bonus I've highlighted the scary warnings about host access with the appropriate RST tags. Acked-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230124180127.1881110-22-alex.bennee@linaro.org>
2023-01-16tcg: add perfmap and jitdumpIlya Leoshkevich
Add ability to dump /tmp/perf-<pid>.map and jit-<pid>.dump. The first one allows the perf tool to map samples to each individual translation block. The second one adds the ability to resolve symbol names, line numbers and inspect JITed code. Example of use: perf record qemu-x86_64 -perfmap ./a.out perf report or perf record -k 1 qemu-x86_64 -jitdump ./a.out DEBUGINFOD_URLS= perf inject -j -i perf.data -o perf.data.jitted perf report -i perf.data.jitted Co-developed-by: Vanderson M. do Rosario <vandersonmr2@gmail.com> Co-developed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230112152013.125680-4-iii@linux.ibm.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-01-09Merge tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu into ↵Peter Maydell
staging * s390x header clean-ups from Philippe * Rework and improvements of the EINTR handling by Nikita * Deprecate the -no-hpet command line option * Disable the qtests in the 32-bit Windows CI job again * Some other misc fixes here and there # gpg: Signature made Mon 09 Jan 2023 14:21:19 GMT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2023-01-09' of https://gitlab.com/thuth/qemu: .gitlab-ci.d/windows: Do not run the qtests in the msys2-32bit job error handling: Use RETRY_ON_EINTR() macro where applicable Refactoring: refactor TFR() macro to RETRY_ON_EINTR() docs/interop: Change the vnc-ledstate-Pseudo-encoding doc into .rst i386: Deprecate the -no-hpet QEMU command line option tests/qtest/bios-tables-test: Replace -no-hpet with hpet=off machine parameter tests/readconfig: spice doesn't support unix socket on windows yet target/s390x: Restrict sysemu/reset.h to system emulation target/s390x/tcg/excp_helper: Restrict system headers to sysemu target/s390x/tcg/misc_helper: Remove unused "memory.h" include hw/s390x/pv: Restrict Protected Virtualization to sysemu exec/memory: Expose memory_region_access_valid() MAINTAINERS: Add MIPS-related docs and configs to the MIPS architecture section tests/vm: Update get_default_jobs() to work on non-x86_64 non-KVM hosts qemu-iotests/stream-under-throttle: do not shutdown QEMU Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-09i386: Deprecate the -no-hpet QEMU command line optionThomas Huth
The HPET setting has been turned into a machine property a while ago already, so we should finally do the next step and deprecate the legacy CLI option, too. Message-Id: <20221229114913.260400-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Ján Tomko <jtomko@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-01-09Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Peter Maydell
into staging virtio,pc,pci: features, cleanups, fixes mostly vhost-vdpa: guest announce feature emulation when using shadow virtqueue support for configure interrupt startup speed ups an acpi change to only generate cluster node in PPTT when specified for arm misc fixes, cleanups Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Sun 08 Jan 2023 08:01:39 GMT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full] # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (50 commits) vhost-scsi: fix memleak of vsc->inflight acpi: cpuhp: fix guest-visible maximum access size to the legacy reg block tests: acpi: aarch64: Add *.topology tables tests: acpi: aarch64: Add topology test for aarch64 tests: acpi: Add and whitelist *.topology blobs tests: virt: Update expected ACPI tables for virt test hw/acpi/aml-build: Only generate cluster node in PPTT when specified tests: virt: Allow changes to PPTT test table virtio-pci: fix proxy->vector_irqfd leak in virtio_pci_set_guest_notifiers vdpa: commit all host notifier MRs in a single MR transaction vhost: configure all host notifiers in a single MR transaction vhost: simplify vhost_dev_enable_notifiers vdpa: harden the error path if get_iova_range failed vdpa-dev: get iova range explicitly docs/devel: Rules on #include in headers include: Include headers where needed include/hw/virtio: Break inclusion loop include/hw/cxl: Break inclusion loop cxl_pci.h and cxl_cdat_h include/hw/pci: Include hw/pci/pci.h where needed include/hw/pci: Split pci_device.h off pci.h ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-01-08hw/acpi/aml-build: Only generate cluster node in PPTT when specifiedYicong Yang
Currently we'll always generate a cluster node no matter user has specified '-smp clusters=X' or not. Cluster is an optional level and will participant the building of Linux scheduling domains and only appears on a few platforms. It's unncessary to always build it when it cannot reflect the real topology on platforms having no cluster implementation and to avoid affecting the linux scheduling domains in the VM. So only generate the cluster topology in ACPI PPTT when the user has specified it explicitly in -smp. Tested qemu-system-aarch64 with `-smp 8` and linux 6.1-rc1, without this patch: estuary:/sys/devices/system/cpu/cpu0/topology$ cat cluster_* ff # cluster_cpus 0-7 # cluster_cpus_list 56 # cluster_id with this patch: estuary:/sys/devices/system/cpu/cpu0/topology$ cat cluster_* ff # cluster_cpus 0-7 # cluster_cpus_list 36 # cluster_id, with no cluster node kernel will make it to physical package id Acked-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Yanan Wang <wangyanan55@huawei.com> Tested-by: Yanan Wang <wangyanan55@huawei.com> Signed-off-by: Yicong Yang <yangyicong@hisilicon.com> Message-Id: <20221229065513.55652-3-yangyicong@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-01-06util: remove support -chardev tty and -chardev parportPaolo Bonzini
These were deprecated in 6.0 and can now be removed. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-11-11Fix several typos in documentation (found by codespell)Stefan Weil
Those typos are in files which are used to generate the QEMU manual. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-Id: <20221110190825.879620-1-sw@weilnetz.de> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Ani Sinha <ani@anisinha.ca> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> [thuth: update sentence in can.rst as suggested by Peter] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-08Revert "s390x/s390-virtio-ccw: add zpcii-disable machine property"Cédric Le Goater
This reverts commit 59d1ce44396e3ad2330dc3261ff3da7ad3a16184. The "zpcii-disable" machine property is redundant with the "interpret" zPCI device property. Remove it for clarification. Signed-off-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20221107161349.1032730-2-clg@kaod.org> Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-11-05Fix some typos in documentation and commentsStefan Weil
Most of them were found and fixed using codespell. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20221030105944.311940-1-sw@weilnetz.de> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2022-11-03Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingStefan Hajnoczi
* bug fixes * reduced memory footprint for IPI virtualization on Intel processors * asynchronous teardown support (Linux only) # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNiVykUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroN0Swf/YxjphCtFgYYSO14WP+7jAnfRZLhm # 0xWChWP8rco5I352OBFeFU64Av5XoLGNn6SZLl8lcg86lQ/G0D27jxu6wOcDDHgw # 0yTDO1gevj51UKsbxoC66OWSZwKTEo398/BHPDcI2W41yOFycSdtrPgspOrFRVvf # 7M3nNjuNPsQorZeuu8NGr3jakqbt99ZDXcyDEWbrEAcmy2JBRMbGgT0Kdnc6aZfW # CvL+1ljxzldNwGeNBbQW2QgODbfHx5cFZcy4Daze35l5Ra7K/FrgAzr6o/HXptya # 9fEs5LJQ1JWI6JtpaWwFy7fcIIOsJ0YW/hWWQZSDt9JdAJFE5/+vF+Kz5Q== # =CgrO # -----END PGP SIGNATURE----- # gpg: Signature made Wed 02 Nov 2022 07:40:25 EDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: target/i386: Fix test for paging enabled util/log: Close per-thread log file on thread termination target/i386: Set maximum APIC ID to KVM prior to vCPU creation os-posix: asynchronous teardown for shutdown on Linux target/i386: Fix calculation of LOCK NEG eflags Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-31os-posix: asynchronous teardown for shutdown on LinuxClaudio Imbrenda
This patch adds support for asynchronously tearing down a VM on Linux. When qemu terminates, either naturally or because of a fatal signal, the VM is torn down. If the VM is huge, it can take a considerable amount of time for it to be cleaned up. In case of a protected VM, it might take even longer than a non-protected VM (this is the case on s390x, for example). Some users might want to shut down a VM and restart it immediately, without having to wait. This is especially true if management infrastructure like libvirt is used. This patch implements a simple trick on Linux to allow qemu to return immediately, with the teardown of the VM being performed asynchronously. If the new commandline option -async-teardown is used, a new process is spawned from qemu at startup, using the clone syscall, in such way that it will share its address space with qemu.The new process will have the name "cleanup/<QEMU_PID>". It will wait until qemu terminates completely, and then it will exit itself. This allows qemu to terminate quickly, without having to wait for the whole address space to be torn down. The cleanup process will exit after qemu, so it will be the last user of the address space, and therefore it will take care of the actual teardown. The cleanup process will share the same cgroups as qemu, so both memory usage and cpu time will be accounted properly. If possible, close_range will be used in the cleanup process to close all open file descriptors. If it is not available or if it fails, /proc will be used to determine which file descriptors to close. If the cleanup process is forcefully killed with SIGKILL before the main qemu process has terminated completely, the mechanism is defeated and the teardown will not be asynchronous. This feature can already be used with libvirt by adding the following to the XML domain definition to pass the parameter to qemu directly: <commandline xmlns="http://libvirt.org/schemas/domain/qemu/1.0"> <arg value='-async-teardown'/> </commandline> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Tested-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Message-Id: <20220812133453.82671-1-imbrenda@linux.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-28net: stream: move to QIO to enable additional parametersLaurent Vivier
Use QIOChannel, QIOChannelSocket and QIONetListener. This allows net/stream to use all the available parameters provided by SocketAddress. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-28net: dgram: add unix socketLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema) Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-28net: stream: add unix socketLaurent Vivier
Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> (QAPI schema) Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-28qapi: net: add stream and dgram netdevsLaurent Vivier
Copied from socket netdev file and modified to use SocketAddress to be able to introduce new features like unix socket. "udp" and "mcast" are squashed into dgram netdev, multicast is detected according to the IP address type. "listen" and "connect" modes are managed by stream netdev. An optional parameter "server" defines the mode (off by default) The two new types need to be parsed the modern way with -netdev, because with the traditional way, the "type" field of netdev structure collides with the "type" field of SocketAddress and prevents the correct evaluation of the command line option. Moreover the traditional way doesn't allow to use the same type (SocketAddress) several times with the -netdev option (needed to specify "local" and "remote" addresses). The previous commit paved the way for parsing the modern way, but omitted one detail: how to pick modern vs. traditional, in netdev_is_modern(). We want to pick based on the value of parameter "type". But how to extract it from the option argument? Parsing the option argument, either the modern or the traditional way, extracts it for us, but only if parsing succeeds. If parsing fails, there is no good option. No matter which parser we pick, it'll be the wrong one for some arguments, and the error reporting will be confusing. Fortunately, the traditional parser accepts *anything* when called in a certain way. This maximizes our chance to extract the value of "type", and in turn minimizes the risk of confusing error reporting. Signed-off-by: Laurent Vivier <lvivier@redhat.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-28vhost-vdpa: allow passing opened vhostfd to vhost-vdpaSi-Wei Liu
Similar to other vhost backends, vhostfd can be passed to vhost-vdpa backend as another parameter to instantiate vhost-vdpa net client. This would benefit the use case where only open file descriptors, as opposed to raw vhost-vdpa device paths, are accessible from the QEMU process. (qemu) netdev_add type=vhost-vdpa,vhostfd=61,id=vhost-vdpa1 Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-10-13Merge tag 'kraxel-20221013-pull-request' of https://gitlab.com/kraxel/qemu ↵Stefan Hajnoczi
into staging pci: cleanup virtio ids. audio: bugfixes and latency improvements. misc fixes for hw/display and ui # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEoDKM/7k6F6eZAf59TLbY7tPocTgFAmNHtYsACgkQTLbY7tPo # cTjHhg//RDkHbqVSExe+Odw5ISuLu/EXZSHAVjo3KOCUvaj7O2cXi8N7DVfEy5a5 # T3+WSv0v4X6TYSV0PoMb36a11rCuOKzeLZrtEOQeYfG3D1WCVc9gIWMt6omzBC7A # YQ59P+u19qHD7xD2PP3WRtdcqmsceg1RG+47adX2EnsRZmmu/yJxD72w/Q1kXMuB # jIzuJU2ZVorYX9y11hnIU3M5pvoX/vjFA+Ib2UGZZdlE3KlUKtJeAtLiZkHfoyd1 # 5janU+PtSU6Z1yVirE7RVz3+IBbfqqEFTkDtMXJucJW/Eod0NHCyo4Q6D64HoiZe # +JZKkHmuvn8ZUgXMtIOZdH+aOHlaIJzA5SoA2IFxCBVuxn7p4NtPbCRoHHg7gkDh # BDsq+p/wsdOY06u1txFw9dYy+4tKvWS7+Dxhyme7GT2YUQHrEEG3pzGFmk3PE0Vi # tEAhmfNRxWzUgIcynQiN/3SnShAI8lANq0SEiiTvqcX7h1TK+cjEYjOTMsjK43nL # 2W/pgQxJpEPcSs3jgFLnBLk9rUHRNRC+GtMBlwN+Wdc1y17leZHiIinqhHjXuts3 # cJTdv4veeGuJENPIl2rk5JOdvpVtzduDkz+Rzx0mGb+LnAYdK2lBUV5LY9FfdwaK # 2Bgg02ZYNBz7K2zzFeeV+7b7K/LYOuWkGdzGvKbpqjbefopZmTM= # =6d/F # -----END PGP SIGNATURE----- # gpg: Signature made Thu 13 Oct 2022 02:51:55 EDT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * tag 'kraxel-20221013-pull-request' of https://gitlab.com/kraxel/qemu: (26 commits) audio: improve out.voices test audio: fix in.voices test gtk: Add show_menubar=on|off command line option. qemu-edid: Restrict input parameter -d to avoid division by zero ui/gtk: Fix the implicit mouse ungrabbing logic pci-ids: document modern virtio-pci ids in pci.h too pci-ids: drop list of modern virtio devices pci-ids: drop PCI_DEVICE_ID_VIRTIO_PMEM pci-ids: drop PCI_DEVICE_ID_VIRTIO_MEM pci-ids: drop PCI_DEVICE_ID_VIRTIO_IOMMU docs: add firmware feature flags cirrus_vga: fix potential memory overflow ui/gtk-egl: egl context needs to be unbound in the end of gd_egl_switch ui/vnc-clipboard: fix integer underflow in vnc_client_cut_text_ext audio: prevent an integer overflow in resampling code audio: fix sw->buf size for audio recording audio: refactor audio_get_avail() audio: rename audio_sw_bytes_free() audio: swap audio_rate_get_bytes() function parameters spiceaudio: update comment ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-13Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingStefan Hajnoczi
* scsi-disk: support setting CD-ROM block size via device options * target/i386: Implement MSR_CORE_THREAD_COUNT MSR * target/i386: notify VM exit support * target/i386: PC-relative translation block support * target/i386: support for XSAVE state in signal frames (linux-user) # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmNFKP4UHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNJnwgAgCcOOxmY4Qem0Gd1L+SJKpEtGMOd # 4LY7443vT36pMpvqFNSfp5GBjDT1MgTD8BIY28miLMq959LT89LyM9g/H7IKOT82 # uyCsW3jW+6F19EZVkNvzTt+3USn/kaHn50zA4Ss9kvdNZr31b2LYqtglVCznfZwH # oI1rDhvsXubq8oWvwkqH7IwduK8mw+EB5Yz7AjYQ6eiYjenTrQBObpwQNbb4rlUf # oRm8dk/YJ2gfI2HQkoznGEbgpngy2tIU1vHNEpIk5NpwXxrulOyui3+sWaG4pH8f # oAOrSDC23M5A6jBJJAzDJ1q6M677U/kwJypyGQ7IyvyhECXE3tR+lHX1eA== # =tqeJ # -----END PGP SIGNATURE----- # gpg: Signature made Tue 11 Oct 2022 04:27:42 EDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (37 commits) linux-user: i386/signal: support XSAVE/XRSTOR for signal frame fpstate linux-user: i386/signal: support FXSAVE fpstate on 32-bit emulation linux-user: i386/signal: move fpstate at the end of the 32-bit frames KVM: x86: Implement MSR_CORE_THREAD_COUNT MSR i386: kvm: Add support for MSR filtering x86: Implement MSR_CORE_THREAD_COUNT MSR target/i386: Enable TARGET_TB_PCREL target/i386: Inline gen_jmp_im target/i386: Add cpu_eip target/i386: Create eip_cur_tl target/i386: Merge gen_jmp_tb and gen_goto_tb into gen_jmp_rel target/i386: Remove MemOp argument to gen_op_j*_ecx target/i386: Use gen_jmp_rel for DISAS_TOO_MANY target/i386: Use gen_jmp_rel for gen_jcc target/i386: Use gen_jmp_rel for loop, repz, jecxz insns target/i386: Create gen_jmp_rel target/i386: Use DISAS_TOO_MANY to exit after gen_io_start target/i386: Create eip_next_* target/i386: Truncate values for lcall_real to i32 target/i386: Introduce DISAS_JUMP ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-10-12gtk: Add show_menubar=on|off command line option.Bryce Mills
The patch adds "show_menubar" command line option for GTK UI similar to "show_tabs". This option allows to hide menu bar initially, it still can be toggled by shortcut and other shortcuts still work. Signed-off-by: Bryce Mills <brycemills@proton.me> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <NWO_zx1CT5Aj9vAXsRlqBppXd63gcKwL9V1qM1Meh36M_9tCw-EsCnfpvONXhHjmtKIUoSuCy9OO6cHS7M8b0oHBOCZG6f1jZ4Q2tqgI2Qo=@proton.me> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-10-11i386: add notify VM exit supportChenyi Qiang
There are cases that malicious virtual machine can cause CPU stuck (due to event windows don't open up), e.g., infinite loop in microcode when nested #AC (CVE-2015-5307). No event window means no event (NMI, SMI and IRQ) can be delivered. It leads the CPU to be unavailable to host or other VMs. Notify VM exit is introduced to mitigate such kind of attacks, which will generate a VM exit if no event window occurs in VM non-root mode for a specified amount of time (notify window). A new KVM capability KVM_CAP_X86_NOTIFY_VMEXIT is exposed to user space so that the user can query the capability and set the expected notify window when creating VMs. The format of the argument when enabling this capability is as follows: Bit 63:32 - notify window specified in qemu command Bit 31:0 - some flags (e.g. KVM_X86_NOTIFY_VMEXIT_ENABLED is set to enable the feature.) Users can configure the feature by a new (x86 only) accel property: qemu -accel kvm,notify-vmexit=run|internal-error|disable,notify-window=n The default option of notify-vmexit is run, which will enable the capability and do nothing if the exit happens. The internal-error option raises a KVM internal error if it happens. The disable option does not enable the capability. The default value of notify-window is 0. It is valid only when notify-vmexit is not disabled. The valid range of notify-window is non-negative. It is even safe to set it to zero since there's an internal hardware threshold to be added to ensure no false positive. Because a notify VM exit may happen with VM_CONTEXT_INVALID set in exit qualification (no cases are anticipated that would set this bit), which means VM context is corrupted. It would be reflected in the flags of KVM_EXIT_NOTIFY exit. If KVM_NOTIFY_CONTEXT_INVALID bit is set, raise a KVM internal error unconditionally. Acked-by: Peter Xu <peterx@redhat.com> Signed-off-by: Chenyi Qiang <chenyi.qiang@intel.com> Message-Id: <20220929072014.20705-5-chenyi.qiang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-10-09hw/smbios: support for type 8 (port connector)Hal Martin
PATCH v1: add support for SMBIOS type 8 to qemu PATCH v2: incorporate patch v1 feedback and add smbios type=8 to qemu-options internal_reference: internal reference designator external_reference: external reference designator connector_type: hex value for port connector type (see SMBIOS 7.9.2) port_type: hex value for port type (see SMBIOS 7.9.3) After studying various vendor implementationsi (Dell, Lenovo, MSI), the value of internal connector type was hard-coded to 0x0 (None). Example usage: -smbios type=8,internal_reference=JUSB1,external_reference=USB1,connector_type=0x12,port_type=0x10 \ -smbios type=8,internal_reference=JAUD1,external_reference="Audio Jack",connector_type=0x1f,port_type=0x1d \ -smbios type=8,internal_reference=LAN,external_reference=Ethernet,connector_type=0x0b,port_type=0x1f \ -smbios type=8,internal_reference=PS2,external_reference=Mouse,connector_type=0x0f,port_type=0x0e \ -smbios type=8,internal_reference=PS2,external_reference=Keyboard,connector_type=0x0f,port_type=0x0d Signed-off-by: Hal Martin <hal.martin@gmail.com> Message-Id: <20220812135153.17859-1-hal.martin@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-10-04Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into stagingStefan Hajnoczi
* x86: re-enable rng seeding via SetupData * x86: reinitialize RNG seed on system reboot and after kernel load * qboot: rebuild based on latest commit * watchdog: remove -watchdog option * update Meson to 0.61.5, move more configure tests # -----BEGIN PGP SIGNATURE----- # # iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmM4kiAUHHBib256aW5p # QHJlZGhhdC5jb20ACgkQv/vSX3jHroNfbgf+IHhIHVxtBVWqayVRkwpQC+oAFV/V # 4bvJI90rHmTNPA36n1ocUmQmXyNVTQFW/t7mlln5BhOwNzxnQycVe2idfMa6ntkb # hHpe2NbICF9Crzb9BkK4wnaBLwEWA/X3WlnCqPYtxlxEhjmxu+HPtF7vm12OTkOV # JevH3EN1gMiAfMo+gcRBlrwb5kntLm3nGZTCd218Ope22PoU6MVvxb9ivieJG8kD # xDUGPQNU0mB9pypwLYZAqmu34xJ8Stly9UuJ1M2iQoawIs7W2Qy7svpOrsKZ3W/7 # D7J18QLAjI7Hq6rUWPgK5ugnUvVMdaTXM7MZSuIDIxRJuj5YryIsHRPybQ== # =HEmX # -----END PGP SIGNATURE----- # gpg: Signature made Sat 01 Oct 2022 15:16:48 EDT # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * tag 'for-upstream' of https://gitlab.com/bonzini/qemu: x86: re-initialize RNG seed when selecting kernel target/i386/kvm: fix kvmclock_current_nsec: Assertion `time.tsc_timestamp <= migration_tsc' failed configure, meson: move linker flag detection to meson configure, meson: move C++ compiler detection to meson.build meson: multiple names can be passed to dependency() meson: require 0.61.3 meson: -display dbus and CFI are incompatible ui: fix path to dbus-display1.h watchdog: remove -watchdog option configure: do not invoke as/ld directly for pc-bios/optionrom qboot: rebuild based on latest commit x86: re-enable rng seeding via SetupData x86: reinitialize RNG seed on system reboot x86: use typedef for SetupData struct x86: return modified setup_data only if read as memory, not as file Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-09-29watchdog: remove -watchdog optionPaolo Bonzini
This was deprecated in 6.2 and is ready to go. It removes quite a bit of code that handled the registration of watchdog models. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-27Merge tag 'pull-request-2022-09-26' of https://gitlab.com/thuth/qemu into ↵Stefan Hajnoczi
staging * Fix emulation of the LZRF instruction * Fix "noexec" TCG test on s390x * Implement SHA-512 and random number generator instructions * Support for zPCI interpretation on s390x hosts * Removal of the "slirp" submodule # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmMx26URHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbUaOw/7Bu1ghYJyzjR8raXSzOP8KmyltKb0s0zd # rFpagZCeBiNGHAL2IaKHc3vw+oFy/TTWhrFLt+imDo2swDIIAWCb/bY2/snKX4c8 # feF0io7JTdNCWvS/9ng6qL/fGSNM6V2osYyN5fEm46DM7gC3GlAu5vP2TCVoIifw # AXDANd6XngoCAFBdixGNi0yxAmiLCou/1S+lJ7hCbx1oICPPTrzuGBwyQ+IELJOD # DUGFb+Dl4z+tv8OYRhdvoSTCz75IhsAXeny2+coffvW70BDSyhzIAtVeo2azVGvT # aOVRJt+g7H/mJ0vH20M/7pakdwvHs3zciw5oHUJSsEW1HzsqNgl+AEEUzXivipaN # LYp5//klqjjAu12hFQbzmbhD/vUw2+8mRgbJdKOz7rSrZ/K8f+jqIbbU5r8t1oyy # BqLo2i0EVBfAomzbHMD/kmrumiSNIlfSDwScAoIKAO6P3oy/Sg2twMhPlFRWAnI0 # 46dQS1rLuU0nV4tMCAQoXxRxjQXytCOhaF9G+qe9ogLufHG+Uy+j3IeunyAUl9GR # EcnRB0GFjWfZKeUsR9qev2pvgOZXeg4u+wpjGM7pmfpZw89nBqCj0UVAthXlSKoz # ru3HcuBJTBtxwYkSCsPMEDCk/FhJN0D+N205qg+6SY28R57WjTPFLvZPRmhkH03E # jN8rurLISAM= # =FeSy # -----END PGP SIGNATURE----- # gpg: Signature made Mon 26 Sep 2022 13:04:37 EDT # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2022-09-26' of https://gitlab.com/thuth/qemu: Remove the slirp submodule (i.e. compile only with an external libslirp) s390x/s390-virtio-ccw: add zpcii-disable machine property s390x/pci: reflect proper maxstbl for groups of interpreted devices s390x/pci: let intercept devices have separate PCI groups s390x/pci: enable adapter event notification for interpreted devices s390x/pci: don't fence interpreted devices without MSI-X s390x/pci: enable for load/store interpretation s390x/pci: add routine to get host function handle from CLP info Update linux headers to v6.0-rc4 configure: Add -Wno-gnu-variable-sized-type-not-at-end target/s390x: support PRNO_TRNG instruction target/s390x: support SHA-512 extensions linux-user/host/s390: Add vector instructions to host_signal_write() s390x/tcg: Fix opcode for lzrf Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2022-09-27audio: Add sndio backendAlexandre Ratchov
sndio is the native API used by OpenBSD, although it has been ported to other *BSD's and Linux (packages for Ubuntu, Debian, Void, Arch, etc.). Signed-off-by: Brad Smith <brad@comstyle.com> Signed-off-by: Alexandre Ratchov <alex@caoua.org> Reviewed-by: Volker Rümelin <vr_qemu@t-online.de> Tested-by: Volker Rümelin <vr_qemu@t-online.de> Message-Id: <YxibXrWsrS3XYQM3@vm1.arverb.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-09-26s390x/s390-virtio-ccw: add zpcii-disable machine propertyMatthew Rosato
The zpcii-disable machine property can be used to force-disable the use of zPCI interpretation facilities for a VM. By default, this setting will be off for machine 7.2 and newer. Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <20220902172737.170349-9-mjrosato@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Fix contextual conflict in ccw_machine_7_1_instance_options()] Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-09-19audio: add help option for -audio and -audiodevClaudio Fontana
add a simple help option for -audio and -audiodev to show the list of available drivers, and document them. Signed-off-by: Claudio Fontana <cfontana@suse.de> Message-Id: <20220908081441.7111-1-cfontana@suse.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-09-13semihosting: Allow optional use of semihosting from userspacePeter Maydell
Currently our semihosting implementations generally prohibit use of semihosting calls in system emulation from the guest userspace. This is a very long standing behaviour justified originally "to provide some semblance of security" (since code with access to the semihosting ABI can do things like read and write arbitrary files on the host system). However, it is sometimes useful to be able to run trusted guest code which performs semihosting calls from guest userspace, notably for test code. Add a command line suboption to the existing semihosting-config option group so that you can explicitly opt in to semihosting from guest userspace with -semihosting-config userspace=on (There is no equivalent option for the user-mode emulator, because there by definition all code runs in userspace and has access to semihosting already.) This commit adds the infrastructure for the command line option and adds a bool 'is_user' parameter to the function semihosting_userspace_enabled() that target code can use to check whether it should be permitting the semihosting call for userspace. It mechanically makes all the callsites pass 'false', so they continue checking "is semihosting enabled in general". Subsequent commits will make each target that implements semihosting honour the userspace=on option by passing the correct value and removing whatever "don't do this for userspace" checking they were doing by hand. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Acked-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20220822141230.3658237-2-peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-08-24qemu-options: try and clarify preferred block semanticsAlex Bennée
Try to correct any confusion about QEMU's Byzantine disk options by laying out the preferred "modern" options as-per: "<danpb> (best: -device + -blockdev, 2nd obsolete syntax: -device + -drive, 3rd obsolete syntax: -drive, 4th obsolete syntax: -hdNN)" Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Cc: qemu-block@nongnu.org Cc: Kevin Wolf <kwolf@redhat.com> Cc: Hanna Reitz <hreitz@redhat.com> Cc: Thomas Huth <thuth@redhat.com> Message-Id: <20220822165608.2980552-7-alex.bennee@linaro.org>
2022-07-29qemu-options: bring the kernel and image options togetherAlex Bennée
How to control the booting of QEMU is often a source of confusion for users. Bring the options that control this together in the manual pages and add some verbiage to describe when each option is appropriate. This attempts to codify some of the knowledge expressed in: https://stackoverflow.com/questions/58420670/qemu-bios-vs-kernel-vs-device-loader-file/58434837#58434837 Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20220725140520.515340-14-alex.bennee@linaro.org>
2022-07-29qapi: Add exit-failure PanicActionIlya Leoshkevich
Currently QEMU exits with code 0 on both panic an shutdown. For tests it is useful to return 1 on panic, so that it counts as a test failure. Introduce a new exit-failure PanicAction that makes main() return EXIT_FAILURE. Tests can use -action panic=exit-failure option to activate this behavior. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: David Hildenbrand <david@redhat.com> Message-Id: <20220725223746.227063-2-iii@linux.ibm.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
2022-07-19gtk: Add show_tabs=on|off command line option.Felix xq Queißner
The patch adds "show_tabs" command line option for GTK ui similar to "grab_on_hover". This option allows tabbed view mode to not have to be enabled by hand at each start of the VM. Signed-off-by: Felix "xq" Queißner <xq@random-projects.net> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Hanna Reitz <hreitz@redhat.com> Message-Id: <20220712133753.18937-1-xq@random-projects.net> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2022-06-09hw/cxl: Make the CXL fixed memory window setup a machine parameter.Jonathan Cameron
Paolo Bonzini requested this change to simplify the ongoing effort to allow machine setup entirely via RPC. Includes shortening the command line form cxl-fixed-memory-window to cxl-fmw as the command lines are extremely long even with this change. The json change is needed to ensure that there is a CXLFixedMemoryWindowOptionsList even though the actual element in the json is never used. Similar to existing SgxEpcProperties. Update qemu-options.hx to reflect that this is now a -machine parameter. The bulk of -M / -machine parameters are documented under machine, so use that in preference to M. Update cxl-test and bios-tables-test to reflect new parameters. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Davidlohr Bueso <dave@stgolabs.net> Message-Id: <20220608145440.26106-2-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-06-03ui: Remove deprecated options "-sdl" and "-curses"Thomas Huth
We have "-sdl" and "-curses", but no "-gtk" and no "-cocoa" ... these old-style options are rather confusing than helpful nowadays. Now that the deprecation period is over, let's remove them, so we get a cleaner interface (where "-display" is the only way to select the user interface). Message-Id: <20220519155625.1414365-4-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-06-03ui: Remove deprecated parameters of the "-display sdl" optionThomas Huth
Dropping these deprecated parameters simplifies further refactoring (e.g. QAPIfication is easier without underscores in the name). Message-Id: <20220519155625.1414365-2-thuth@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-05-17net/vmnet: update qemu-options.hxVladislav Yaroshchuk
Update qemu-options.hx to support vmnet networking backend. Reviewed-by: Akihiko Odaki <akihiko.odaki@gmail.com> Tested-by: Akihiko Odaki <akihiko.odaki@gmail.com> Signed-off-by: Vladislav Yaroshchuk <Vladislav.Yaroshchuk@jetbrains.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2022-05-16Merge tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Richard Henderson
into staging virtio,pc,pci: fixes,cleanups,features most of CXL support fixes, cleanups all over the place Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKCuLIPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRpdDUH/12SmWaAo+0+SdIHgWFFxsmg3t/EdcO38fgi # MV+GpYdbp6TlU3jdQhrMZYmFdkVVydBdxk93ujCLbFS0ixTsKj31j0IbZMfdcGgv # SLqnV+E3JdHqnGP39q9a9rdwYWyqhkgHoldxilIFW76ngOSapaZVvnwnOMAMkf77 # 1LieL4/Xq7N9Ho86Zrs3IczQcf0czdJRDaFaSIu8GaHl8ELyuPhlSm6CSqqrEEWR # PA/COQsLDbLOMxbfCi5v88r5aaxmGNZcGbXQbiH9qVHw65nlHyLH9UkNTdJn1du1 # f2GYwwa7eekfw/LCvvVwxO1znJrj02sfFai7aAtQYbXPvjvQiqA= # =xdSk # -----END PGP SIGNATURE----- # gpg: Signature made Mon 16 May 2022 01:48:50 PM PDT # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of git://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (86 commits) vhost-user-scsi: avoid unlink(NULL) with fd passing virtio-net: don't handle mq request in userspace handler for vhost-vdpa vhost-vdpa: change name and polarity for vhost_vdpa_one_time_request() vhost-vdpa: backend feature should set only once vhost-net: fix improper cleanup in vhost_net_start vhost-vdpa: fix improper cleanup in net_init_vhost_vdpa virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa virtio-net: setup vhost_dev and notifiers for cvq only when feature is negotiated hw/i386/amd_iommu: Fix IOMMU event log encoding errors hw/i386: Make pic a property of common x86 base machine type hw/i386: Make pit a property of common x86 base machine type include/hw/pci/pcie_host: Correct PCIE_MMCFG_SIZE_MAX include/hw/pci/pcie_host: Correct PCIE_MMCFG_BUS_MASK docs/vhost-user: Clarifications for VHOST_USER_ADD/REM_MEM_REG vhost-user: more master/slave things virtio: add vhost support for virtio devices virtio: drop name parameter for virtio_init() virtio/vhost-user: dynamically assign VhostUserHostNotifiers hw/virtio/vhost-user: don't suppress F_CONFIG when supported include/hw: start documenting the vhost API ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2022-05-14introduce -audio as a replacement for -soundhwPaolo Bonzini
-audio is used like "-audio pa,model=sb16". It is almost as simple as -soundhw, but it reuses the -audiodev parsing machinery and attaches an audiodev to the newly-created device. The main 'feature' is that it knows about adding the codec device for model=intel-hda, and adding the audiodev to the codec device. In the future, it could be extended to support default models or builtin devices, just like -nic, or even a default backend. For now, keep it simple. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-05-13hw/cxl/host: Add support for CXL Fixed Memory Windows.Jonathan Cameron
The concept of these is introduced in [1] in terms of the description the CEDT ACPI table. The principal is more general. Unlike once traffic hits the CXL root bridges, the host system memory address routing is implementation defined and effectively static once observable by standard / generic system software. Each CXL Fixed Memory Windows (CFMW) is a region of PA space which has fixed system dependent routing configured so that accesses can be routed to the CXL devices below a set of target root bridges. The accesses may be interleaved across multiple root bridges. For QEMU we could have fully specified these regions in terms of a base PA + size, but as the absolute address does not matter it is simpler to let individual platforms place the memory regions. ExampleS: -cxl-fixed-memory-window targets.0=cxl.0,size=128G -cxl-fixed-memory-window targets.0=cxl.1,size=128G -cxl-fixed-memory-window targets.0=cxl0,targets.1=cxl.1,size=256G,interleave-granularity=2k Specifies * 2x 128G regions not interleaved across root bridges, one for each of the root bridges with ids cxl.0 and cxl.1 * 256G region interleaved across root bridges with ids cxl.0 and cxl.1 with a 2k interleave granularity. When system software enumerates the devices below a given root bridge it can then decide which CFMW to use. If non interleave is desired (or possible) it can use the appropriate CFMW for the root bridge in question. If there are suitable devices to interleave across the two root bridges then it may use the 3rd CFMS. A number of other designs were considered but the following constraints made it hard to adapt existing QEMU approaches to this particular problem. 1) The size must be known before a specific architecture / board brings up it's PA memory map. We need to set up an appropriate region. 2) Using links to the host bridges provides a clean command line interface but these links cannot be established until command line devices have been added. Hence the two step process used here of first establishing the size, interleave-ways and granularity + caching the ids of the host bridges and then, once available finding the actual host bridges so they can be used later to support interleave decoding. [1] CXL 2.0 ECN: CEDT CFMWS & QTG DSM (computeexpresslink.org / specifications) Signed-off-by: Jonathan Cameron <jonathan.cameron@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> # QAPI Schema Message-Id: <20220429144110.25167-28-Jonathan.Cameron@huawei.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2022-05-09qemu-options: Limit the -xen options to x86 and armThomas Huth
The Xen hypervisor is only available on x86 and arm - thus let's limit the related options to these targets. Message-Id: <20220427133156.344418-1-thuth@redhat.com> Acked-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2022-04-28qemu-options: Limit the -enable-kvm option to the targets that support itThomas Huth
There is no need to present the user with -enable-kvm if there is no support for KVM on the corresponding target. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20220427134906.348118-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-28remove -writeconfigPaolo Bonzini
Like -set and -readconfig, it would not really be too hard to extend -writeconfig to parsing mechanisms other than QemuOpts. However, the uses of -writeconfig are substantially more limited, as it is generally easier to write the configuration by hand in the first place. In addition, -writeconfig does not even try to detect cases where it prints incorrect syntax (for example if values have a quote in them, since qemu_config_parse does not support any kind of escaping. Just remove it. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20220414145721.326866-1-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2022-04-26softmmu: remove deprecated --enable-fips optionDaniel P. Berrangé
Users requiring FIPS support must build QEMU with either the libgcrypt or gnutls libraries as the crytography backend. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2022-03-22qemu-options: define -spice only #ifdef CONFIG_SPICEMarc-André Lureau
Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1982600 Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2022-03-15ui/cocoa: add option to swap Option and CommandGustavo Noronha Silva
On Mac OS X the Option key maps to Alt and Command to Super/Meta. This change swaps them around so that Alt is the key closer to the space bar and Meta/Super is between Control and Alt, like on non-Mac keyboards. It is a cocoa display option, disabled by default. Acked-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gustavo Noronha Silva <gustavo@noronha.dev.br> Message-Id: <20210713213200.2547-3-gustavo@noronha.dev.br> Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20220306121119.45631-3-akihiko.odaki@gmail.com> Reviewed-by: Will Cohen <wwcohen@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 01:58:00 +0000